! Started logfile: /g0/scr/pima/npcsb_uvs/J1222+0413_S_uvs.log on Sat Oct  5 18:58:51 2013
obs /g0/scr/pima/npcsb_uvs/J1222+0413_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1222+0413_S_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.888889 visibilities/baseline/integration-bin.
! Found source: J1222+0413
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1120 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1222+0413_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.188152Jy  sigma=6.194795
! Fit after  self-cal, rms=0.426604Jy  sigma=2.091459
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.734 mas, bmaj=7.465 mas, bpa=-2.602 degrees
! Estimated noise=5.34575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.467814 Jy
! Component: 100  -  total flux cleaned = 0.573121 Jy
! Total flux subtracted in 100 components = 0.573121 Jy
! Clean residual min=-0.021554 max=0.035932 Jy/beam
! Clean residual mean=0.000012 rms=0.006546 Jy/beam
! Combined flux in latest and established models = 0.573121 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.573121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130166Jy  sigma=0.679110
! Fit after  self-cal, rms=0.130158Jy  sigma=0.679031
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.226 mas, bmaj=8.032 mas, bpa=-2.559 degrees
! Estimated noise=4.25807 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0389873 Jy
! Component: 100  -  total flux cleaned = 0.0577975 Jy
! Component: 150  -  total flux cleaned = 0.0685919 Jy
! Component: 200  -  total flux cleaned = 0.0753687 Jy
! Total flux subtracted in 200 components = 0.0753687 Jy
! Clean residual min=-0.022192 max=0.014625 Jy/beam
! Clean residual mean=0.000009 rms=0.004284 Jy/beam
! Combined flux in latest and established models = 0.64849 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 52 components and 0.64849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120986Jy  sigma=0.612126
! Fit after  self-cal, rms=0.120968Jy  sigma=0.611908
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.98     KP        0.98     
!   LA        1.10     MK        0.92     NL        0.99     OV        1.00     
!   PT        1.10     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.99     KP        1.02     
!   LA        1.07     MK        0.96     NL        1.00     OV        1.00     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     HN        1.01     KP        0.97     
!   LA        0.88     MK        1.08     NL        1.12     OV        1.04     
!   PT        1.11     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.03     HN        0.98     KP        0.90     
!   LA        0.70     MK        1.12     NL        1.01     OV        0.91     
!   PT        0.99     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.120968Jy  sigma=0.611908
! Fit after  self-cal, rms=0.093067Jy  sigma=0.467055
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.241 mas, bmaj=8.078 mas, bpa=-2.37 degrees
! Estimated noise=4.22758 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00434229 Jy
! Component: 100  -  total flux cleaned = -0.00579756 Jy
! Component: 150  -  total flux cleaned = -0.00586351 Jy
! Component: 200  -  total flux cleaned = -0.00598359 Jy
! Total flux subtracted in 200 components = -0.00598359 Jy
! Clean residual min=-0.005992 max=0.006701 Jy/beam
! Clean residual mean=-0.000002 rms=0.001615 Jy/beam
! Combined flux in latest and established models = 0.642507 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 64 components and 0.642507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092622Jy  sigma=0.467018
! Fit after  self-cal, rms=0.092742Jy  sigma=0.466474
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092742Jy  sigma=0.466474
! Fit after  self-cal, rms=0.092497Jy  sigma=0.465978
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.242 mas, bmaj=8.083 mas, bpa=-2.373 degrees
! Estimated noise=4.2014 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00394926 Jy
! Component: 100  -  total flux cleaned = -0.00527048 Jy
! Component: 150  -  total flux cleaned = -0.00537196 Jy
! Component: 200  -  total flux cleaned = -0.00537503 Jy
! Total flux subtracted in 200 components = -0.00537503 Jy
! Clean residual min=-0.006092 max=0.006570 Jy/beam
! Clean residual mean=-0.000003 rms=0.001586 Jy/beam
! Combined flux in latest and established models = 0.637132 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.637132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092068Jy  sigma=0.466289
! Fit after  self-cal, rms=0.092080Jy  sigma=0.466254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.96069e-05 Jy
! Component: 100  -  total flux cleaned = -4.3441e-06 Jy
! Component: 150  -  total flux cleaned = 7.60386e-05 Jy
! Component: 200  -  total flux cleaned = 7.54415e-05 Jy
! Total flux subtracted in 200 components = 7.54415e-05 Jy
! Clean residual min=-0.006079 max=0.006529 Jy/beam
! Clean residual mean=-0.000003 rms=0.001573 Jy/beam
! Combined flux in latest and established models = 0.637207 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 67 components and 0.637207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092008Jy  sigma=0.466154
! Fit after  self-cal, rms=0.092019Jy  sigma=0.466119
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092019Jy  sigma=0.466119
! Fit after  self-cal, rms=0.091749Jy  sigma=0.465577
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.241 mas, bmaj=8.084 mas, bpa=-2.352 degrees
! Estimated noise=4.17238 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00375457 Jy
! Component: 100  -  total flux cleaned = -0.00496627 Jy
! Component: 150  -  total flux cleaned = -0.00492828 Jy
! Component: 200  -  total flux cleaned = -0.00489127 Jy
! Total flux subtracted in 200 components = -0.00489127 Jy
! Clean residual min=-0.006039 max=0.006462 Jy/beam
! Clean residual mean=-0.000003 rms=0.001551 Jy/beam
! Combined flux in latest and established models = 0.632316 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 68 components and 0.632316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091336Jy  sigma=0.466009
! Fit after  self-cal, rms=0.091347Jy  sigma=0.465982
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.43281e-07 Jy
! Component: 100  -  total flux cleaned = 3.4347e-05 Jy
! Component: 150  -  total flux cleaned = 6.68259e-05 Jy
! Component: 200  -  total flux cleaned = 9.75694e-05 Jy
! Total flux subtracted in 200 components = 9.75694e-05 Jy
! Clean residual min=-0.006025 max=0.006450 Jy/beam
! Clean residual mean=-0.000003 rms=0.001542 Jy/beam
! Combined flux in latest and established models = 0.632413 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 69 components and 0.632414 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091295Jy  sigma=0.465922
! Fit after  self-cal, rms=0.091306Jy  sigma=0.465896
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091306Jy  sigma=0.465896
! Fit after  self-cal, rms=0.091032Jy  sigma=0.465358
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.663 mas, bmaj=12.07 mas, bpa=-4.01 degrees
! Estimated noise=4.88329 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00326257 Jy
! Component: 100  -  total flux cleaned = -0.00456698 Jy
! Component: 150  -  total flux cleaned = -0.0046952 Jy
! Component: 200  -  total flux cleaned = -0.00469621 Jy
! Total flux subtracted in 200 components = -0.00469621 Jy
! Clean residual min=-0.006510 max=0.006723 Jy/beam
! Clean residual mean=-0.000007 rms=0.001830 Jy/beam
! Combined flux in latest and established models = 0.627717 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 73 components and 0.627717 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090818Jy  sigma=0.465521
! Fit after  self-cal, rms=0.090829Jy  sigma=0.465496
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.80002e-08 Jy
! Component: 100  -  total flux cleaned = -7.52703e-07 Jy
! Component: 150  -  total flux cleaned = -1.87862e-06 Jy
! Component: 200  -  total flux cleaned = -9.50682e-07 Jy
! Total flux subtracted in 200 components = -9.50682e-07 Jy
! Clean residual min=-0.006474 max=0.006701 Jy/beam
! Clean residual mean=-0.000007 rms=0.001825 Jy/beam
! Combined flux in latest and established models = 0.627716 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 75 components and 0.627716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090802Jy  sigma=0.465506
! Fit after  self-cal, rms=0.090811Jy  sigma=0.465495
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.241 mas, bmaj=8.083 mas, bpa=-2.332 degrees
! Estimated noise=4.14302 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.241 x 8.083 at -2.332 degrees (North through East)
! Clean map  min=-0.0057442  max=0.57985 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090811Jy  sigma=0.465495
! Fit after  self-cal, rms=0.085911Jy  sigma=0.419049
! Inverting map and beam 
! Estimated beam: bmin=3.243 mas, bmaj=8.082 mas, bpa=-2.306 degrees
! Estimated noise=4.1285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0032799 Jy
! Component: 100  -  total flux cleaned = -0.00375638 Jy
! Component: 150  -  total flux cleaned = -0.00367652 Jy
! Component: 200  -  total flux cleaned = -0.00363897 Jy
! Total flux subtracted in 200 components = -0.00363897 Jy
! Clean residual min=-0.006360 max=0.006357 Jy/beam
! Clean residual mean=0.000001 rms=0.001529 Jy/beam
! Combined flux in latest and established models = 0.624077 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 76 components and 0.624077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085562Jy  sigma=0.419408
! Fit after  self-cal, rms=0.085580Jy  sigma=0.419381
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000289045 Jy
! Component: 100  -  total flux cleaned = -0.00018651 Jy
! Component: 150  -  total flux cleaned = -0.000123758 Jy
! Component: 200  -  total flux cleaned = -3.81366e-05 Jy
! Total flux subtracted in 200 components = -3.81366e-05 Jy
! Clean residual min=-0.006365 max=0.006403 Jy/beam
! Clean residual mean=0.000001 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 0.624039 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 77 components and 0.624039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085511Jy  sigma=0.419422
! Fit after  self-cal, rms=0.085525Jy  sigma=0.419405
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085525Jy  sigma=0.419405
! Fit after  self-cal, rms=0.085306Jy  sigma=0.418944
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.737 mas, bmaj=7.499 mas, bpa=-2.413 degrees
! Estimated noise=5.13111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.44893 Jy
! Component: 100  -  total flux cleaned = 0.550473 Jy
! Component: 150  -  total flux cleaned = 0.583202 Jy
! Component: 200  -  total flux cleaned = 0.598124 Jy
! Total flux subtracted in 200 components = 0.598124 Jy
! Clean residual min=-0.008364 max=0.009820 Jy/beam
! Clean residual mean=0.000000 rms=0.002059 Jy/beam
! Combined flux in latest and established models = 0.598124 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.598124 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.241 mas, bmaj=8.079 mas, bpa=-2.281 degrees
! Estimated noise=4.10277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.5, -9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110826 Jy
! Component: 100  -  total flux cleaned = 0.0173728 Jy
! Component: 150  -  total flux cleaned = 0.0214252 Jy
! Component: 200  -  total flux cleaned = 0.0231964 Jy
! Total flux subtracted in 200 components = 0.0231964 Jy
! Clean residual min=-0.006583 max=0.005893 Jy/beam
! Clean residual mean=-0.000000 rms=0.001489 Jy/beam
! Combined flux in latest and established models = 0.62132 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 60 components and 0.62132 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.668 mas, bmaj=12.08 mas, bpa=-4.013 degrees
! Estimated noise=4.83309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000771798 Jy
! Component: 100  -  total flux cleaned = 0.00108962 Jy
! Component: 150  -  total flux cleaned = 0.00109378 Jy
! Component: 200  -  total flux cleaned = 0.00100703 Jy
! Total flux subtracted in 200 components = 0.00100703 Jy
! Clean residual min=-0.006423 max=0.005841 Jy/beam
! Clean residual mean=-0.000001 rms=0.001755 Jy/beam
! Combined flux in latest and established models = 0.622327 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.86837e-05 Jy
! Component: 100  -  total flux cleaned = -0.000150538 Jy
! Component: 150  -  total flux cleaned = -0.000216055 Jy
! Component: 200  -  total flux cleaned = -0.000276536 Jy
! Total flux subtracted in 200 components = -0.000276536 Jy
! Clean residual min=-0.006458 max=0.005740 Jy/beam
! Clean residual mean=-0.000000 rms=0.001746 Jy/beam
! Combined flux in latest and established models = 0.622051 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 87 components and 0.622051 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.241 mas, bmaj=8.079 mas, bpa=-2.281 degrees
! Estimated noise=4.10277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000484993 Jy
! Component: 100  -  total flux cleaned = -0.000487717 Jy
! Component: 150  -  total flux cleaned = -0.000544443 Jy
! Component: 200  -  total flux cleaned = -0.000592973 Jy
! Total flux subtracted in 200 components = -0.000592973 Jy
! Clean residual min=-0.006102 max=0.006073 Jy/beam
! Clean residual mean=0.000000 rms=0.001434 Jy/beam
! Combined flux in latest and established models = 0.621458 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 100 components and 0.621458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084628Jy  sigma=0.418159
! Fit after  self-cal, rms=0.084593Jy  sigma=0.418066
wmodel /g0/scr/pima/npcsb_uvs/J1222+0413_S_map.mod
! Writing 100 model components to file: /g0/scr/pima/npcsb_uvs/J1222+0413_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1222+0413_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1222+0413_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1222+0413_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J1222+0413_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00120245 Jy
! Component: 100  -  total flux cleaned = 0.00198949 Jy
! Component: 150  -  total flux cleaned = 0.00243606 Jy
! Component: 200  -  total flux cleaned = 0.00277427 Jy
! Component: 250  -  total flux cleaned = 0.0032604 Jy
! Component: 300  -  total flux cleaned = 0.00372469 Jy
! Component: 350  -  total flux cleaned = 0.00424531 Jy
! Component: 400  -  total flux cleaned = 0.00453293 Jy
! Component: 450  -  total flux cleaned = 0.00459969 Jy
! Component: 500  -  total flux cleaned = 0.00459991 Jy
! Component: 550  -  total flux cleaned = 0.00492843 Jy
! Component: 600  -  total flux cleaned = 0.00505572 Jy
! Component: 650  -  total flux cleaned = 0.00511771 Jy
! Component: 700  -  total flux cleaned = 0.00523985 Jy
! Component: 750  -  total flux cleaned = 0.00506155 Jy
! Component: 800  -  total flux cleaned = 0.00517961 Jy
! Component: 850  -  total flux cleaned = 0.00512318 Jy
! Component: 900  -  total flux cleaned = 0.00501155 Jy
! Component: 950  -  total flux cleaned = 0.00473584 Jy
! Component: 1000  -  total flux cleaned = 0.00430524 Jy
! Component: 1050  -  total flux cleaned = 0.00409376 Jy
! Component: 1100  -  total flux cleaned = 0.00388597 Jy
! Component: 1150  -  total flux cleaned = 0.00363057 Jy
! Component: 1200  -  total flux cleaned = 0.00357935 Jy
! Component: 1250  -  total flux cleaned = 0.00323435 Jy
! Component: 1300  -  total flux cleaned = 0.00309061 Jy
! Component: 1350  -  total flux cleaned = 0.00309114 Jy
! Component: 1400  -  total flux cleaned = 0.00285774 Jy
! Component: 1450  -  total flux cleaned = 0.0029044 Jy
! Component: 1500  -  total flux cleaned = 0.00276763 Jy
! Component: 1550  -  total flux cleaned = 0.00258818 Jy
! Component: 1600  -  total flux cleaned = 0.00241207 Jy
! Component: 1650  -  total flux cleaned = 0.00232554 Jy
! Component: 1700  -  total flux cleaned = 0.0021971 Jy
! Component: 1750  -  total flux cleaned = 0.0021128 Jy
! Component: 1800  -  total flux cleaned = 0.00202979 Jy
! Component: 1850  -  total flux cleaned = 0.00190665 Jy
! Component: 1900  -  total flux cleaned = 0.00174373 Jy
! Component: 1950  -  total flux cleaned = 0.00170402 Jy
! Component: 2000  -  total flux cleaned = 0.00162442 Jy
! Component: 2050  -  total flux cleaned = 0.0014681 Jy
! Component: 2100  -  total flux cleaned = 0.00142932 Jy
! Component: 2150  -  total flux cleaned = 0.00119984 Jy
! Component: 2200  -  total flux cleaned = 0.000898877 Jy
! Component: 2250  -  total flux cleaned = 0.000861697 Jy
! Component: 2300  -  total flux cleaned = 0.00060307 Jy
! Component: 2350  -  total flux cleaned = 0.000530471 Jy
! Component: 2400  -  total flux cleaned = 0.000242693 Jy
! Component: 2450  -  total flux cleaned = 0.000206967 Jy
! Component: 2500  -  total flux cleaned = 6.61332e-05 Jy
! Component: 2550  -  total flux cleaned = -0.000143815 Jy
! Component: 2600  -  total flux cleaned = -0.000385754 Jy
! Component: 2650  -  total flux cleaned = -0.000454117 Jy
! Component: 2700  -  total flux cleaned = -0.000555805 Jy
! Component: 2750  -  total flux cleaned = -0.000690297 Jy
! Component: 2800  -  total flux cleaned = -0.000923121 Jy
! Component: 2850  -  total flux cleaned = -0.000923011 Jy
! Component: 2900  -  total flux cleaned = -0.00102108 Jy
! Component: 2950  -  total flux cleaned = -0.00111817 Jy
! Component: 3000  -  total flux cleaned = -0.0012789 Jy
! Component: 3050  -  total flux cleaned = -0.00146987 Jy
! Component: 3100  -  total flux cleaned = -0.00150148 Jy
! Component: 3150  -  total flux cleaned = -0.00172041 Jy
! Component: 3200  -  total flux cleaned = -0.00190644 Jy
! Component: 3250  -  total flux cleaned = -0.00209099 Jy
! Component: 3300  -  total flux cleaned = -0.00224392 Jy
! Component: 3350  -  total flux cleaned = -0.00239546 Jy
! Component: 3400  -  total flux cleaned = -0.00251579 Jy
! Component: 3450  -  total flux cleaned = -0.00260551 Jy
! Component: 3500  -  total flux cleaned = -0.00278367 Jy
! Component: 3550  -  total flux cleaned = -0.00278406 Jy
! Component: 3600  -  total flux cleaned = -0.00293054 Jy
! Component: 3650  -  total flux cleaned = -0.00307611 Jy
! Component: 3700  -  total flux cleaned = -0.00316279 Jy
! Component: 3750  -  total flux cleaned = -0.0033064 Jy
! Component: 3800  -  total flux cleaned = -0.00336329 Jy
! Component: 3850  -  total flux cleaned = -0.00330666 Jy
! Component: 3900  -  total flux cleaned = -0.00350426 Jy
! Component: 3950  -  total flux cleaned = -0.00361647 Jy
! Component: 4000  -  total flux cleaned = -0.00370029 Jy
! Component: 4050  -  total flux cleaned = -0.0037281 Jy
! Total flux subtracted in 4096 components = -0.00378327 Jy
! Clean residual min=-0.001819 max=0.001581 Jy/beam
! Clean residual mean=0.000000 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.617674 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 376 components and 0.617675 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1222+0413_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.241 x 8.079 at -2.281 degrees (North through East)
! Clean map  min=-0.0032918  max=0.57537 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1222+0413_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.575367 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0004899 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.255437 0.255437 0.510874 1.02175 2.0435 4.08699 8.17398 16.348 32.6959 65.3919
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.575 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1222+0413_S_uvs.log closed on Sat Oct  5 18:58:55 2013