! Started logfile: /g0/scr/pima/npcsb_uvs/J1159+2914_S_uvs.log on Sat Oct 5 18:58:46 2013 obs /g0/scr/pima/npcsb_uvs/J1159+2914_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1159+2914_S_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.635897 visibilities/baseline/integration-bin. ! Found source: J1159+2914 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1488 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1159+2914_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.128824Jy sigma=5.227754 ! Fit after self-cal, rms=0.546585Jy sigma=1.893760 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=8.232 mas, bpa=-22.19 degrees ! Estimated noise=6.55596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.426415 Jy ! Component: 100 - total flux cleaned = 0.567502 Jy ! Total flux subtracted in 100 components = 0.567502 Jy ! Clean residual min=-0.040058 max=0.070622 Jy/beam ! Clean residual mean=0.000050 rms=0.014789 Jy/beam ! Combined flux in latest and established models = 0.567502 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.567502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180932Jy sigma=0.987797 ! Fit after self-cal, rms=0.179983Jy sigma=0.985962 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.717 mas, bmaj=8.409 mas, bpa=-21.87 degrees ! Estimated noise=4.55684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0898596 Jy ! Component: 100 - total flux cleaned = 0.140905 Jy ! Component: 150 - total flux cleaned = 0.173377 Jy ! Component: 200 - total flux cleaned = 0.19512 Jy ! Total flux subtracted in 200 components = 0.19512 Jy ! Clean residual min=-0.028397 max=0.040525 Jy/beam ! Clean residual mean=0.000008 rms=0.008912 Jy/beam ! Combined flux in latest and established models = 0.762622 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 73 components and 0.762622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152406Jy sigma=0.692161 ! Fit after self-cal, rms=0.151078Jy sigma=0.688573 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 0.95 KP 0.94 ! LA 1.12 MK 1.00 NL 1.19 OV 1.01 ! PT 1.07 SC 1.05 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.99 KP 0.96 ! LA 1.07 MK 1.04 NL 1.16 OV 0.99 ! PT 0.98 SC 0.97 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.96 HN 0.98 KP 0.97 ! LA 0.84 MK 1.08 NL 1.21 OV 1.03 ! PT 1.03 SC 1.04 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.93 KP 0.87 ! LA 0.75 MK 1.09 NL 1.07 OV 0.89 ! PT 0.92 SC 1.08 ! ! ! Fit before self-cal, rms=0.151078Jy sigma=0.688573 ! Fit after self-cal, rms=0.124250Jy sigma=0.489465 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.796 mas, bmaj=8.402 mas, bpa=-21.81 degrees ! Estimated noise=4.50056 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160897 Jy ! Component: 100 - total flux cleaned = 0.015481 Jy ! Component: 150 - total flux cleaned = 0.0159364 Jy ! Component: 200 - total flux cleaned = 0.0155848 Jy ! Total flux subtracted in 200 components = 0.0155848 Jy ! Clean residual min=-0.013251 max=0.021692 Jy/beam ! Clean residual mean=-0.000009 rms=0.004100 Jy/beam ! Combined flux in latest and established models = 0.778207 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 93 components and 0.778207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117634Jy sigma=0.468165 ! Fit after self-cal, rms=0.116893Jy sigma=0.465643 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116893Jy sigma=0.465643 ! Fit after self-cal, rms=0.115549Jy sigma=0.463292 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.767 mas, bmaj=8.381 mas, bpa=-21.87 degrees ! Estimated noise=4.44467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557369 Jy ! Component: 100 - total flux cleaned = 0.00817429 Jy ! Component: 150 - total flux cleaned = 0.00907224 Jy ! Component: 200 - total flux cleaned = 0.0095909 Jy ! Total flux subtracted in 200 components = 0.0095909 Jy ! Clean residual min=-0.011595 max=0.017340 Jy/beam ! Clean residual mean=-0.000005 rms=0.003503 Jy/beam ! Combined flux in latest and established models = 0.787798 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 113 components and 0.787798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113002Jy sigma=0.454688 ! Fit after self-cal, rms=0.112377Jy sigma=0.452969 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (101, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014925 Jy ! Component: 100 - total flux cleaned = 0.0210111 Jy ! Component: 150 - total flux cleaned = 0.0229523 Jy ! Component: 200 - total flux cleaned = 0.0238104 Jy ! Total flux subtracted in 200 components = 0.0238104 Jy ! Clean residual min=-0.010450 max=0.011777 Jy/beam ! Clean residual mean=0.000004 rms=0.002732 Jy/beam ! Combined flux in latest and established models = 0.811608 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 143 components and 0.811608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110348Jy sigma=0.441422 ! Fit after self-cal, rms=0.110100Jy sigma=0.440636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110100Jy sigma=0.440636 ! Fit after self-cal, rms=0.109645Jy sigma=0.439021 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=8.375 mas, bpa=-21.92 degrees ! Estimated noise=4.40416 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135252 Jy ! Component: 100 - total flux cleaned = 0.00343721 Jy ! Component: 150 - total flux cleaned = 0.0054015 Jy ! Component: 200 - total flux cleaned = 0.00662063 Jy ! Total flux subtracted in 200 components = 0.00662063 Jy ! Clean residual min=-0.009312 max=0.010356 Jy/beam ! Clean residual mean=0.000008 rms=0.002415 Jy/beam ! Combined flux in latest and established models = 0.818229 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 165 components and 0.818229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108481Jy sigma=0.435995 ! Fit after self-cal, rms=0.108351Jy sigma=0.435572 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-36, -103). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00915305 Jy ! Component: 100 - total flux cleaned = 0.0127557 Jy ! Component: 150 - total flux cleaned = 0.0153607 Jy ! Component: 200 - total flux cleaned = 0.0173172 Jy ! Total flux subtracted in 200 components = 0.0173172 Jy ! Clean residual min=-0.008329 max=0.007596 Jy/beam ! Clean residual mean=0.000008 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.835546 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 198 components and 0.835546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107206Jy sigma=0.429428 ! Fit after self-cal, rms=0.107133Jy sigma=0.429115 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107133Jy sigma=0.429115 ! Fit after self-cal, rms=0.106763Jy sigma=0.428419 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.007 mas, bmaj=10.31 mas, bpa=-2.08 degrees ! Estimated noise=4.46622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159054 Jy ! Component: 100 - total flux cleaned = 0.00499592 Jy ! Component: 150 - total flux cleaned = 0.00762139 Jy ! Component: 200 - total flux cleaned = 0.00969571 Jy ! Total flux subtracted in 200 components = 0.00969571 Jy ! Clean residual min=-0.008246 max=0.007829 Jy/beam ! Clean residual mean=0.000013 rms=0.002124 Jy/beam ! Combined flux in latest and established models = 0.845242 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 234 components and 0.845242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106319Jy sigma=0.426932 ! Fit after self-cal, rms=0.106223Jy sigma=0.426691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133937 Jy ! Component: 100 - total flux cleaned = 0.00268567 Jy ! Component: 150 - total flux cleaned = 0.00376085 Jy ! Component: 200 - total flux cleaned = 0.0044434 Jy ! Total flux subtracted in 200 components = 0.0044434 Jy ! Clean residual min=-0.007638 max=0.007022 Jy/beam ! Clean residual mean=0.000012 rms=0.001955 Jy/beam ! Combined flux in latest and established models = 0.849685 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 255 components and 0.849685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106132Jy sigma=0.426097 ! Fit after self-cal, rms=0.106086Jy sigma=0.425961 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.747 mas, bmaj=8.372 mas, bpa=-21.91 degrees ! Estimated noise=4.37101 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.747 x 8.372 at -21.91 degrees (North through East) ! Clean map min=-0.0095115 max=0.5056 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106086Jy sigma=0.425961 ! Fit after self-cal, rms=0.105392Jy sigma=0.363486 ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=8.381 mas, bpa=-21.84 degrees ! Estimated noise=4.36104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200542 Jy ! Component: 100 - total flux cleaned = -0.00299907 Jy ! Component: 150 - total flux cleaned = -0.00311962 Jy ! Component: 200 - total flux cleaned = -0.00312025 Jy ! Total flux subtracted in 200 components = -0.00312025 Jy ! Clean residual min=-0.006905 max=0.005379 Jy/beam ! Clean residual mean=0.000005 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.846565 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 266 components and 0.846565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104815Jy sigma=0.362522 ! Fit after self-cal, rms=0.104863Jy sigma=0.362440 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143254 Jy ! Component: 100 - total flux cleaned = 0.000156409 Jy ! Component: 150 - total flux cleaned = 0.000247793 Jy ! Component: 200 - total flux cleaned = 0.000247427 Jy ! Total flux subtracted in 200 components = 0.000247427 Jy ! Clean residual min=-0.006313 max=0.005232 Jy/beam ! Clean residual mean=0.000005 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.846813 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 275 components and 0.846813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104581Jy sigma=0.361940 ! Fit after self-cal, rms=0.104595Jy sigma=0.361907 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104595Jy sigma=0.361907 ! Fit after self-cal, rms=0.104172Jy sigma=0.361554 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.164 mas, bmaj=8.238 mas, bpa=-22.12 degrees ! Estimated noise=6.1968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.405055 Jy ! Component: 100 - total flux cleaned = 0.541669 Jy ! Component: 150 - total flux cleaned = 0.615991 Jy ! Component: 200 - total flux cleaned = 0.662231 Jy ! Total flux subtracted in 200 components = 0.662231 Jy ! Clean residual min=-0.021532 max=0.027233 Jy/beam ! Clean residual mean=0.000016 rms=0.006826 Jy/beam ! Combined flux in latest and established models = 0.662231 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 61 model components to the UV plane model. ! The established model now contains 61 components and 0.662231 Jy ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=8.378 mas, bpa=-21.85 degrees ! Estimated noise=4.33569 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377671 Jy ! Component: 100 - total flux cleaned = 0.0640815 Jy ! Component: 150 - total flux cleaned = 0.0837964 Jy ! Component: 200 - total flux cleaned = 0.0987192 Jy ! Total flux subtracted in 200 components = 0.0987192 Jy ! Clean residual min=-0.011766 max=0.011100 Jy/beam ! Clean residual mean=0.000004 rms=0.003137 Jy/beam ! Combined flux in latest and established models = 0.76095 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 112 components and 0.76095 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8 mas, bmaj=10.32 mas, bpa=-1.994 degrees ! Estimated noise=4.43486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175862 Jy ! Component: 100 - total flux cleaned = 0.030295 Jy ! Component: 150 - total flux cleaned = 0.0403288 Jy ! Component: 200 - total flux cleaned = 0.0484611 Jy ! Total flux subtracted in 200 components = 0.0484611 Jy ! Clean residual min=-0.009995 max=0.007803 Jy/beam ! Clean residual mean=0.000007 rms=0.002574 Jy/beam ! Combined flux in latest and established models = 0.809411 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0067099 Jy ! Component: 100 - total flux cleaned = 0.0122967 Jy ! Component: 150 - total flux cleaned = 0.0168429 Jy ! Component: 200 - total flux cleaned = 0.0196419 Jy ! Total flux subtracted in 200 components = 0.0196419 Jy ! Clean residual min=-0.007890 max=0.007349 Jy/beam ! Clean residual mean=0.000007 rms=0.001941 Jy/beam ! Combined flux in latest and established models = 0.829053 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 193 components and 0.829053 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.742 mas, bmaj=8.378 mas, bpa=-21.85 degrees ! Estimated noise=4.33569 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00046336 Jy ! Component: 100 - total flux cleaned = 0.000356795 Jy ! Component: 150 - total flux cleaned = 0.00167213 Jy ! Component: 200 - total flux cleaned = 0.00261669 Jy ! Total flux subtracted in 200 components = 0.00261669 Jy ! Clean residual min=-0.006854 max=0.006789 Jy/beam ! Clean residual mean=0.000007 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.83167 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 220 components and 0.83167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104484Jy sigma=0.364608 ! Fit after self-cal, rms=0.104355Jy sigma=0.363845 wmodel /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.mod ! Writing 220 model components to file: /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1159+2914_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1159+2914_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.win ! wwins: Wrote 4 windows to /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192796 Jy ! Component: 100 - total flux cleaned = -0.0033257 Jy ! Component: 150 - total flux cleaned = -0.00442693 Jy ! Component: 200 - total flux cleaned = -0.00425785 Jy ! Component: 250 - total flux cleaned = -0.00417689 Jy ! Component: 300 - total flux cleaned = -0.00417741 Jy ! Component: 350 - total flux cleaned = -0.00410413 Jy ! Component: 400 - total flux cleaned = -0.00381555 Jy ! Component: 450 - total flux cleaned = -0.00360529 Jy ! Component: 500 - total flux cleaned = -0.00326574 Jy ! Component: 550 - total flux cleaned = -0.00313396 Jy ! Component: 600 - total flux cleaned = -0.00287646 Jy ! Component: 650 - total flux cleaned = -0.00268787 Jy ! Component: 700 - total flux cleaned = -0.00244281 Jy ! Component: 750 - total flux cleaned = -0.00226229 Jy ! Component: 800 - total flux cleaned = -0.00190961 Jy ! Component: 850 - total flux cleaned = -0.00156548 Jy ! Component: 900 - total flux cleaned = -0.0012264 Jy ! Component: 950 - total flux cleaned = -0.00117049 Jy ! Component: 1000 - total flux cleaned = -0.000845266 Jy ! Component: 1050 - total flux cleaned = -0.000632428 Jy ! Component: 1100 - total flux cleaned = -0.000476407 Jy ! Component: 1150 - total flux cleaned = -0.000322597 Jy ! Component: 1200 - total flux cleaned = -0.000221311 Jy ! Component: 1250 - total flux cleaned = -0.000121332 Jy ! Component: 1300 - total flux cleaned = -7.15315e-05 Jy ! Component: 1350 - total flux cleaned = 0.000170271 Jy ! Component: 1400 - total flux cleaned = 0.000313823 Jy ! Component: 1450 - total flux cleaned = 0.000501106 Jy ! Component: 1500 - total flux cleaned = 0.000546898 Jy ! Component: 1550 - total flux cleaned = 0.000773817 Jy ! Component: 1600 - total flux cleaned = 0.000728723 Jy ! Component: 1650 - total flux cleaned = 0.000861398 Jy ! Component: 1700 - total flux cleaned = 0.000904718 Jy ! Component: 1750 - total flux cleaned = 0.000990599 Jy ! Component: 1800 - total flux cleaned = 0.00111721 Jy ! Component: 1850 - total flux cleaned = 0.00128412 Jy ! Component: 1900 - total flux cleaned = 0.00144936 Jy ! Component: 1950 - total flux cleaned = 0.00165355 Jy ! Component: 2000 - total flux cleaned = 0.00189621 Jy ! Component: 2050 - total flux cleaned = 0.00197598 Jy ! Component: 2100 - total flux cleaned = 0.00229172 Jy ! Component: 2150 - total flux cleaned = 0.00233036 Jy ! Component: 2200 - total flux cleaned = 0.00244602 Jy ! Component: 2250 - total flux cleaned = 0.00259882 Jy ! Component: 2300 - total flux cleaned = 0.00259875 Jy ! Component: 2350 - total flux cleaned = 0.00274865 Jy ! Component: 2400 - total flux cleaned = 0.00286045 Jy ! Component: 2450 - total flux cleaned = 0.00293441 Jy ! Component: 2500 - total flux cleaned = 0.00308048 Jy ! Component: 2550 - total flux cleaned = 0.00308061 Jy ! Component: 2600 - total flux cleaned = 0.00318813 Jy ! Component: 2650 - total flux cleaned = 0.00325886 Jy ! Component: 2700 - total flux cleaned = 0.00329417 Jy ! Component: 2750 - total flux cleaned = 0.00336422 Jy ! Component: 2800 - total flux cleaned = 0.00332984 Jy ! Component: 2850 - total flux cleaned = 0.00346725 Jy ! Component: 2900 - total flux cleaned = 0.00353549 Jy ! Component: 2950 - total flux cleaned = 0.00360294 Jy ! Component: 3000 - total flux cleaned = 0.0035692 Jy ! Component: 3050 - total flux cleaned = 0.0036357 Jy ! Component: 3100 - total flux cleaned = 0.00363552 Jy ! Component: 3150 - total flux cleaned = 0.0037345 Jy ! Component: 3200 - total flux cleaned = 0.00386531 Jy ! Component: 3250 - total flux cleaned = 0.00393025 Jy ! Component: 3300 - total flux cleaned = 0.00402688 Jy ! Component: 3350 - total flux cleaned = 0.004059 Jy ! Component: 3400 - total flux cleaned = 0.00418665 Jy ! Component: 3450 - total flux cleaned = 0.00431351 Jy ! Component: 3500 - total flux cleaned = 0.0043452 Jy ! Component: 3550 - total flux cleaned = 0.00443943 Jy ! Component: 3600 - total flux cleaned = 0.00456404 Jy ! Component: 3650 - total flux cleaned = 0.004719 Jy ! Component: 3700 - total flux cleaned = 0.00471899 Jy ! Component: 3750 - total flux cleaned = 0.00493425 Jy ! Component: 3800 - total flux cleaned = 0.00502604 Jy ! Component: 3850 - total flux cleaned = 0.00511766 Jy ! Component: 3900 - total flux cleaned = 0.00523914 Jy ! Component: 3950 - total flux cleaned = 0.0054508 Jy ! Component: 4000 - total flux cleaned = 0.00551092 Jy ! Component: 4050 - total flux cleaned = 0.00554099 Jy ! Total flux subtracted in 4096 components = 0.00566068 Jy ! Clean residual min=-0.002204 max=0.001939 Jy/beam ! Clean residual mean=0.000005 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.837331 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 482 components and 0.83733 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1159+2914_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.742 x 8.378 at -21.85 degrees (North through East) ! Clean map min=-0.0033855 max=0.50278 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1159+2914_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.502783 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000534181 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.318735 0.318735 0.63747 1.27494 2.54988 5.09976 10.1995 20.399 40.7981 81.5961 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.502 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1159+2914_S_uvs.log closed on Sat Oct 5 18:58:50 2013