! Started logfile: /g0/scr/pima/npcsb_uvs/J1155+8157_S_uvs.log on Sat Oct 5 18:58:42 2013 obs /g0/scr/pima/npcsb_uvs/J1155+8157_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1155+8157_S_uva.fits ! AN table 1: 47 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.451368 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1155+8157 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2376 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1155+8157_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 144 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005158Jy sigma=0.906441 ! Fit after self-cal, rms=0.915378Jy sigma=0.812987 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=11.25 mas, bmaj=46.69 mas, bpa=29.11 degrees ! Estimated noise=44.5411 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0967517 Jy ! Component: 100 - total flux cleaned = 0.0896452 Jy ! Total flux subtracted in 100 components = 0.0896452 Jy ! Clean residual min=-0.020173 max=0.020198 Jy/beam ! Clean residual mean=-0.000073 rms=0.011137 Jy/beam ! Combined flux in latest and established models = 0.0896452 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.0896452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094270Jy sigma=0.086564 ! Fit after self-cal, rms=0.093046Jy sigma=0.085694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.29 mas, bmaj=42.99 mas, bpa=27.2 degrees ! Estimated noise=19.5854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446527 Jy ! Component: 100 - total flux cleaned = 0.0059179 Jy ! Component: 150 - total flux cleaned = 0.00707806 Jy ! Component: 200 - total flux cleaned = 0.00803128 Jy ! Total flux subtracted in 200 components = 0.00803128 Jy ! Clean residual min=-0.002994 max=0.002955 Jy/beam ! Clean residual mean=0.000018 rms=0.001310 Jy/beam ! Combined flux in latest and established models = 0.0976764 Jy ! Performing phase self-cal ! Adding 86 model components to the UV plane model. ! The established model now contains 127 components and 0.0976764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093103Jy sigma=0.081754 ! Fit after self-cal, rms=0.092847Jy sigma=0.081455 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 KP 0.93 LA 1.03 ! NL 1.00* OV 0.93 PT 1.03 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 KP 0.91 LA 0.96 ! NL 1.00* OV 0.92 PT 0.91 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 KP 0.94 LA 0.87 ! NL 1.00* OV 1.07 PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 KP 0.84 LA 0.71 ! NL 1.00* OV 0.85 PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.092847Jy sigma=0.081455 ! Fit after self-cal, rms=0.081421Jy sigma=0.075094 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=13.34 mas, bmaj=42.18 mas, bpa=26.88 degrees ! Estimated noise=16.6329 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0137818 Jy ! Component: 100 - total flux cleaned = -0.0154485 Jy ! Component: 150 - total flux cleaned = -0.0170477 Jy ! Component: 200 - total flux cleaned = -0.0181333 Jy ! Total flux subtracted in 200 components = -0.0181333 Jy ! Clean residual min=-0.001267 max=0.001261 Jy/beam ! Clean residual mean=0.000008 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0795432 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 179 components and 0.0795432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074603Jy sigma=0.077320 ! Fit after self-cal, rms=0.074476Jy sigma=0.077130 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074476Jy sigma=0.077130 ! Fit after self-cal, rms=0.069474Jy sigma=0.074729 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.25 mas, bmaj=42.14 mas, bpa=26.94 degrees ! Estimated noise=14.3079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0116763 Jy ! Component: 100 - total flux cleaned = -0.0123502 Jy ! Component: 150 - total flux cleaned = -0.0128589 Jy ! Component: 200 - total flux cleaned = -0.0132273 Jy ! Total flux subtracted in 200 components = -0.0132273 Jy ! Clean residual min=-0.001084 max=0.001076 Jy/beam ! Clean residual mean=0.000003 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0663158 Jy selfcal ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 227 components and 0.0663158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063733Jy sigma=0.077048 ! Fit after self-cal, rms=0.063713Jy sigma=0.077016 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000370875 Jy ! Component: 100 - total flux cleaned = -5.07334e-05 Jy ! Component: 150 - total flux cleaned = 0.000366132 Jy ! Component: 200 - total flux cleaned = 0.000675209 Jy ! Total flux subtracted in 200 components = 0.000675209 Jy ! Clean residual min=-0.000630 max=0.000628 Jy/beam ! Clean residual mean=0.000004 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.066991 Jy ! Performing phase self-cal ! Adding 67 model components to the UV plane model. ! The established model now contains 288 components and 0.066991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063544Jy sigma=0.077090 ! Fit after self-cal, rms=0.063558Jy sigma=0.077077 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063558Jy sigma=0.077077 ! Fit after self-cal, rms=0.059146Jy sigma=0.074516 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.16 mas, bmaj=42.03 mas, bpa=26.99 degrees ! Estimated noise=12.2421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00987374 Jy ! Component: 100 - total flux cleaned = -0.0103752 Jy ! Component: 150 - total flux cleaned = -0.0106183 Jy ! Component: 200 - total flux cleaned = -0.0103917 Jy ! Total flux subtracted in 200 components = -0.0103917 Jy ! Clean residual min=-0.000828 max=0.000838 Jy/beam ! Clean residual mean=0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 0.0565993 Jy selfcal ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 338 components and 0.0565993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054297Jy sigma=0.076880 ! Fit after self-cal, rms=0.054296Jy sigma=0.076861 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00018667 Jy ! Component: 100 - total flux cleaned = 0.00027741 Jy ! Component: 150 - total flux cleaned = 0.000649703 Jy ! Component: 200 - total flux cleaned = 0.000975717 Jy ! Total flux subtracted in 200 components = 0.000975717 Jy ! Clean residual min=-0.000481 max=0.000483 Jy/beam ! Clean residual mean=0.000004 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.057575 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 402 components and 0.057575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054167Jy sigma=0.076964 ! Fit after self-cal, rms=0.054178Jy sigma=0.076959 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054178Jy sigma=0.076959 ! Fit after self-cal, rms=0.050486Jy sigma=0.074416 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.77 mas, bmaj=41.31 mas, bpa=26.7 degrees ! Estimated noise=10.4581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00847713 Jy ! Component: 100 - total flux cleaned = -0.0086 Jy ! Component: 150 - total flux cleaned = -0.00862822 Jy ! Component: 200 - total flux cleaned = -0.00880185 Jy ! Total flux subtracted in 200 components = -0.00880185 Jy ! Clean residual min=-0.000706 max=0.000707 Jy/beam ! Clean residual mean=0.000002 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.0487732 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 446 components and 0.0487732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046360Jy sigma=0.076783 ! Fit after self-cal, rms=0.046366Jy sigma=0.076768 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.85169e-05 Jy ! Component: 100 - total flux cleaned = 0.000423094 Jy ! Component: 150 - total flux cleaned = 0.000642456 Jy ! Component: 200 - total flux cleaned = 0.000807231 Jy ! Total flux subtracted in 200 components = 0.000807231 Jy ! Clean residual min=-0.000338 max=0.000343 Jy/beam ! Clean residual mean=0.000003 rms=0.000134 Jy/beam ! Combined flux in latest and established models = 0.0495804 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 501 components and 0.0495804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046248Jy sigma=0.076921 ! Fit after self-cal, rms=0.046256Jy sigma=0.076917 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=13.06 mas, bmaj=41.92 mas, bpa=27.05 degrees ! Estimated noise=10.4773 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 13.06 x 41.92 at 27.05 degrees (North through East) ! Clean map min=-0.005907 max=0.048786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.04 mas, bmaj=45.57 mas, bpa=29.32 degrees ! Estimated noise=29.8552 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444168 Jy ! Component: 100 - total flux cleaned = 0.0484106 Jy ! Component: 150 - total flux cleaned = 0.0523856 Jy ! Component: 200 - total flux cleaned = 0.0539778 Jy ! Total flux subtracted in 200 components = 0.0539778 Jy ! Clean residual min=-0.003517 max=0.003534 Jy/beam ! Clean residual mean=-0.000037 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.0539778 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 82 model components to the UV plane model. ! The established model now contains 82 components and 0.0539778 Jy ! Inverting map and beam ! Estimated beam: bmin=13.06 mas, bmaj=41.92 mas, bpa=27.05 degrees ! Estimated noise=10.4773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956684 Jy ! Component: 100 - total flux cleaned = 0.00215922 Jy ! Component: 150 - total flux cleaned = 0.0030931 Jy ! Component: 200 - total flux cleaned = 0.00378318 Jy ! Total flux subtracted in 200 components = 0.00378318 Jy ! Clean residual min=-0.001529 max=0.001531 Jy/beam ! Clean residual mean=-0.000017 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.057761 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 182 components and 0.057761 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=13.77 mas, bmaj=41.31 mas, bpa=26.7 degrees ! Estimated noise=10.4581 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000430349 Jy ! Component: 100 - total flux cleaned = 0.000100432 Jy ! Component: 150 - total flux cleaned = -0.000198991 Jy ! Component: 200 - total flux cleaned = -0.000461634 Jy ! Total flux subtracted in 200 components = -0.000461634 Jy ! Clean residual min=-0.000691 max=0.000695 Jy/beam ! Clean residual mean=-0.000003 rms=0.000283 Jy/beam ! Combined flux in latest and established models = 0.0572994 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121057 Jy ! Component: 100 - total flux cleaned = 0.00012271 Jy ! Component: 150 - total flux cleaned = 1.13235e-05 Jy ! Component: 200 - total flux cleaned = -2.52653e-05 Jy ! Total flux subtracted in 200 components = -2.52653e-05 Jy ! Clean residual min=-0.000607 max=0.000611 Jy/beam ! Clean residual mean=0.000001 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.0572741 Jy ! Adding 136 model components to the UV plane model. ! The established model now contains 316 components and 0.0572741 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=13.06 mas, bmaj=41.92 mas, bpa=27.05 degrees ! Estimated noise=10.4773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000332208 Jy ! Component: 100 - total flux cleaned = -0.000508891 Jy ! Component: 150 - total flux cleaned = -0.000564629 Jy ! Component: 200 - total flux cleaned = -0.000565 Jy ! Total flux subtracted in 200 components = -0.000565 Jy ! Clean residual min=-0.000437 max=0.000439 Jy/beam ! Clean residual mean=-0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 0.0567091 Jy selfcal ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 388 components and 0.0567091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046277Jy sigma=0.077211 ! Fit after self-cal, rms=0.046261Jy sigma=0.077180 wmodel /g0/scr/pima/npcsb_uvs/J1155+8157_S_map.mod ! Writing 388 model components to file: /g0/scr/pima/npcsb_uvs/J1155+8157_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1155+8157_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1155+8157_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1155+8157_S_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: /home/lpetrov/bin/01_muppet] ! wmap "/g0/scr/pima/npcsb_uvs/J1155+8157_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 13.06 x 41.92 at 27.05 degrees (North through East) ! Clean map min=-0.005383 max=0.049088 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1155+8157_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0490882 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000167702 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0249 1.0249 2.0498 4.0996 8.1992 16.3984 32.7968 65.5936 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.049 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1155+8157_S_uvs.log closed on Sat Oct 5 18:58:46 2013