! Started logfile: /g0/scr/pima/npcsb_uvs/J1058+8114_X_uvs.log on Sat Oct  5 18:52:43 2013
obs /g0/scr/pima/npcsb_uvs/J1058+8114_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1058+8114_X_uva.fits
! AN table 1: 24 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.756481 visibilities/baseline/integration-bin.
! Found source: J1058+8114
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3268 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1058+8114_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 44 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.184096Jy  sigma=6.503377
! Fit after  self-cal, rms=0.467521Jy  sigma=1.691508
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7303 mas, bmaj=1.916 mas, bpa=-80.74 degrees
! Estimated noise=4.21619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.486575 Jy
! Component: 100  -  total flux cleaned = 0.640247 Jy
! Total flux subtracted in 100 components = 0.640247 Jy
! Clean residual min=-0.030339 max=0.079790 Jy/beam
! Clean residual mean=0.000326 rms=0.009444 Jy/beam
! Combined flux in latest and established models = 0.640247 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.640247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.215768Jy  sigma=1.133929
! Fit after  self-cal, rms=0.213123Jy  sigma=1.122062
! Inverting map 
! Added new window around map position (1.4, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0830891 Jy
! Component: 100  -  total flux cleaned = 0.126868 Jy
! Total flux subtracted in 100 components = 0.126868 Jy
! Clean residual min=-0.025436 max=0.055317 Jy/beam
! Clean residual mean=0.000131 rms=0.006007 Jy/beam
! Combined flux in latest and established models = 0.767115 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.767115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183537Jy  sigma=0.811731
! Fit after  self-cal, rms=0.181046Jy  sigma=0.788337
! Inverting map 
! Added new window around map position (-1, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0417409 Jy
! Component: 100  -  total flux cleaned = 0.0672717 Jy
! Total flux subtracted in 100 components = 0.0672717 Jy
! Clean residual min=-0.022683 max=0.021096 Jy/beam
! Clean residual mean=0.000029 rms=0.004659 Jy/beam
! Combined flux in latest and established models = 0.834387 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 25 components and 0.834387 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.168827Jy  sigma=0.691869
! Fit after  self-cal, rms=0.169002Jy  sigma=0.691599
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9457 mas, bmaj=2.265 mas, bpa=-81.73 degrees
! Estimated noise=2.60761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.025584 Jy
! Component: 100  -  total flux cleaned = 0.0412786 Jy
! Component: 150  -  total flux cleaned = 0.0517287 Jy
! Component: 200  -  total flux cleaned = 0.0561633 Jy
! Total flux subtracted in 200 components = 0.0561633 Jy
! Clean residual min=-0.022069 max=0.017059 Jy/beam
! Clean residual mean=-0.000109 rms=0.004540 Jy/beam
! Combined flux in latest and established models = 0.89055 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 50 components and 0.89055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164346Jy  sigma=0.660733
! Fit after  self-cal, rms=0.164414Jy  sigma=0.660282
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.98     KP        1.02     
!   LA        1.01     MK        1.01     NL        1.21     OV        0.96     
!   PT        1.04     SC        1.05     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.97     KP        0.94     
!   LA        0.95     MK        0.97     NL        1.19     OV        0.96     
!   PT        1.07     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.00     HN        1.00     KP        0.82     
!   LA        0.97     MK        0.96     NL        1.14     OV        0.97     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.97     KP        0.89     
!   LA        0.93     MK        0.99     NL        1.10     OV        0.98     
!   PT        1.12     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.164414Jy  sigma=0.660282
! Fit after  self-cal, rms=0.152575Jy  sigma=0.570991
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9442 mas, bmaj=2.259 mas, bpa=-81.91 degrees
! Estimated noise=2.6059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0115639 Jy
! Component: 100  -  total flux cleaned = -0.0136599 Jy
! Component: 150  -  total flux cleaned = -0.0148613 Jy
! Component: 200  -  total flux cleaned = -0.0156767 Jy
! Total flux subtracted in 200 components = -0.0156767 Jy
! Clean residual min=-0.013293 max=0.009416 Jy/beam
! Clean residual mean=-0.000025 rms=0.002593 Jy/beam
! Combined flux in latest and established models = 0.874874 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.874874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151468Jy  sigma=0.564043
! Fit after  self-cal, rms=0.152045Jy  sigma=0.563102
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152045Jy  sigma=0.563102
! Fit after  self-cal, rms=0.152760Jy  sigma=0.548802
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9419 mas, bmaj=2.261 mas, bpa=-81.79 degrees
! Estimated noise=2.58837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00781423 Jy
! Component: 100  -  total flux cleaned = -0.00952704 Jy
! Component: 150  -  total flux cleaned = -0.0105832 Jy
! Component: 200  -  total flux cleaned = -0.0114902 Jy
! Total flux subtracted in 200 components = -0.0114902 Jy
! Clean residual min=-0.009428 max=0.007337 Jy/beam
! Clean residual mean=0.000040 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 0.863384 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 69 components and 0.863384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151924Jy  sigma=0.546387
! Fit after  self-cal, rms=0.151853Jy  sigma=0.546194
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000608385 Jy
! Component: 100  -  total flux cleaned = -0.0011084 Jy
! Component: 150  -  total flux cleaned = -0.00133426 Jy
! Component: 200  -  total flux cleaned = -0.0015389 Jy
! Total flux subtracted in 200 components = -0.0015389 Jy
! Clean residual min=-0.009222 max=0.007261 Jy/beam
! Clean residual mean=0.000044 rms=0.001842 Jy/beam
! Combined flux in latest and established models = 0.861845 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 77 components and 0.861845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151604Jy  sigma=0.545251
! Fit after  self-cal, rms=0.151538Jy  sigma=0.545147
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151538Jy  sigma=0.545147
! Fit after  self-cal, rms=0.150899Jy  sigma=0.543449
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.939 mas, bmaj=2.257 mas, bpa=-81.74 degrees
! Estimated noise=2.56585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00666184 Jy
! Component: 100  -  total flux cleaned = -0.00878168 Jy
! Component: 150  -  total flux cleaned = -0.00973898 Jy
! Component: 200  -  total flux cleaned = -0.0101507 Jy
! Total flux subtracted in 200 components = -0.0101507 Jy
! Clean residual min=-0.008363 max=0.006780 Jy/beam
! Clean residual mean=0.000038 rms=0.001729 Jy/beam
! Combined flux in latest and established models = 0.851694 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 80 components and 0.851694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150383Jy  sigma=0.542506
! Fit after  self-cal, rms=0.150340Jy  sigma=0.542420
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000353029 Jy
! Component: 100  -  total flux cleaned = -0.000533713 Jy
! Component: 150  -  total flux cleaned = -0.000532205 Jy
! Component: 200  -  total flux cleaned = -0.000530592 Jy
! Total flux subtracted in 200 components = -0.000530592 Jy
! Clean residual min=-0.008253 max=0.006742 Jy/beam
! Clean residual mean=0.000039 rms=0.001705 Jy/beam
! Combined flux in latest and established models = 0.851163 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 85 components and 0.851163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150204Jy  sigma=0.541914
! Fit after  self-cal, rms=0.150173Jy  sigma=0.541864
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150173Jy  sigma=0.541864
! Fit after  self-cal, rms=0.149435Jy  sigma=0.540396
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.488 mas, bmaj=3.711 mas, bpa=-75.58 degrees
! Estimated noise=2.71826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00664483 Jy
! Component: 100  -  total flux cleaned = -0.00904634 Jy
! Component: 150  -  total flux cleaned = -0.00944434 Jy
! Component: 200  -  total flux cleaned = -0.00976528 Jy
! Total flux subtracted in 200 components = -0.00976528 Jy
! Clean residual min=-0.008081 max=0.006888 Jy/beam
! Clean residual mean=0.000068 rms=0.002050 Jy/beam
! Combined flux in latest and established models = 0.841398 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 95 components and 0.841398 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149165Jy  sigma=0.540410
! Fit after  self-cal, rms=0.149099Jy  sigma=0.540277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000427582 Jy
! Component: 100  -  total flux cleaned = -0.000316064 Jy
! Component: 150  -  total flux cleaned = -0.000225873 Jy
! Component: 200  -  total flux cleaned = -0.000187379 Jy
! Total flux subtracted in 200 components = -0.000187379 Jy
! Clean residual min=-0.007935 max=0.006841 Jy/beam
! Clean residual mean=0.000068 rms=0.002016 Jy/beam
! Combined flux in latest and established models = 0.841211 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 99 components and 0.841211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149090Jy  sigma=0.540391
! Fit after  self-cal, rms=0.149054Jy  sigma=0.540338
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9371 mas, bmaj=2.253 mas, bpa=-81.68 degrees
! Estimated noise=2.54424 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9371 x 2.253 at -81.68 degrees (North through East)
! Clean map  min=-0.010071  max=0.58987 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149054Jy  sigma=0.540338
! Fit after  self-cal, rms=0.532653Jy  sigma=0.470119
! Inverting map and beam 
! Estimated beam: bmin=0.9361 mas, bmaj=2.255 mas, bpa=-81.61 degrees
! Estimated noise=2.54001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00436304 Jy
! Component: 100  -  total flux cleaned = -0.00508649 Jy
! Component: 150  -  total flux cleaned = -0.00558219 Jy
! Component: 200  -  total flux cleaned = -0.00575882 Jy
! Total flux subtracted in 200 components = -0.00575882 Jy
! Clean residual min=-0.006910 max=0.005592 Jy/beam
! Clean residual mean=0.000029 rms=0.001529 Jy/beam
! Combined flux in latest and established models = 0.835452 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 103 components and 0.835452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.532555Jy  sigma=0.468981
! Fit after  self-cal, rms=0.532525Jy  sigma=0.468958
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.95362e-05 Jy
! Component: 100  -  total flux cleaned = -0.000163586 Jy
! Component: 150  -  total flux cleaned = -0.000303789 Jy
! Component: 200  -  total flux cleaned = -0.000431278 Jy
! Total flux subtracted in 200 components = -0.000431278 Jy
! Clean residual min=-0.006873 max=0.005577 Jy/beam
! Clean residual mean=0.000030 rms=0.001516 Jy/beam
! Combined flux in latest and established models = 0.83502 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.83502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.532483Jy  sigma=0.468611
! Fit after  self-cal, rms=0.532476Jy  sigma=0.468585
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.532476Jy  sigma=0.468585
! Fit after  self-cal, rms=0.538066Jy  sigma=0.467938
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7207 mas, bmaj=1.893 mas, bpa=-80.57 degrees
! Estimated noise=4.08198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.471435 Jy
! Component: 100  -  total flux cleaned = 0.634597 Jy
! Component: 150  -  total flux cleaned = 0.711867 Jy
! Component: 200  -  total flux cleaned = 0.751779 Jy
! Total flux subtracted in 200 components = 0.751779 Jy
! Clean residual min=-0.011777 max=0.021403 Jy/beam
! Clean residual mean=0.000132 rms=0.003282 Jy/beam
! Combined flux in latest and established models = 0.751779 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.751779 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.935 mas, bmaj=2.251 mas, bpa=-81.61 degrees
! Estimated noise=2.52826 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0337905 Jy
! Component: 100  -  total flux cleaned = 0.0525358 Jy
! Component: 150  -  total flux cleaned = 0.0636717 Jy
! Component: 200  -  total flux cleaned = 0.0684045 Jy
! Total flux subtracted in 200 components = 0.0684045 Jy
! Clean residual min=-0.007695 max=0.007857 Jy/beam
! Clean residual mean=0.000060 rms=0.001659 Jy/beam
! Combined flux in latest and established models = 0.820184 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 43 components and 0.820184 Jy
! Inverting map 
! Added new window around map position (0.6, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00381841 Jy
! Component: 100  -  total flux cleaned = 0.00463026 Jy
! Component: 150  -  total flux cleaned = 0.00532848 Jy
! Component: 200  -  total flux cleaned = 0.00580021 Jy
! Total flux subtracted in 200 components = 0.00580021 Jy
! Clean residual min=-0.006995 max=0.005818 Jy/beam
! Clean residual mean=0.000042 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 0.825984 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 59 components and 0.825984 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.493 mas, bmaj=3.714 mas, bpa=-75.35 degrees
! Estimated noise=2.70311 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114304 Jy
! Component: 100  -  total flux cleaned = 0.00102064 Jy
! Component: 150  -  total flux cleaned = 0.00101844 Jy
! Component: 200  -  total flux cleaned = 0.00129939 Jy
! Total flux subtracted in 200 components = 0.00129939 Jy
! Clean residual min=-0.007033 max=0.006568 Jy/beam
! Clean residual mean=0.000066 rms=0.001828 Jy/beam
! Combined flux in latest and established models = 0.827283 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000244086 Jy
! Component: 100  -  total flux cleaned = 0.000388914 Jy
! Component: 150  -  total flux cleaned = 0.000453631 Jy
! Component: 200  -  total flux cleaned = 0.0004499 Jy
! Total flux subtracted in 200 components = 0.0004499 Jy
! Clean residual min=-0.006651 max=0.006492 Jy/beam
! Clean residual mean=0.000062 rms=0.001794 Jy/beam
! Combined flux in latest and established models = 0.827733 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 0.827733 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.935 mas, bmaj=2.251 mas, bpa=-81.61 degrees
! Estimated noise=2.52826 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00190746 Jy
! Component: 100  -  total flux cleaned = -0.00204119 Jy
! Component: 150  -  total flux cleaned = -0.00203701 Jy
! Component: 200  -  total flux cleaned = -0.00191854 Jy
! Total flux subtracted in 200 components = -0.00191854 Jy
! Clean residual min=-0.006029 max=0.005801 Jy/beam
! Clean residual mean=0.000038 rms=0.001409 Jy/beam
! Combined flux in latest and established models = 0.825815 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 88 components and 0.825815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.538064Jy  sigma=0.466638
! Fit after  self-cal, rms=0.538022Jy  sigma=0.466313
wmodel /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.mod
! Writing 88 model components to file: /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1058+8114_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1058+8114_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.win
! wwins: Wrote 4 windows to /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -2.50023e-05 Jy
! Component: 100  -  total flux cleaned = 7.82913e-05 Jy
! Component: 150  -  total flux cleaned = 0.000174403 Jy
! Component: 200  -  total flux cleaned = 0.000173922 Jy
! Component: 250  -  total flux cleaned = 0.000174341 Jy
! Component: 300  -  total flux cleaned = 0.000428073 Jy
! Component: 350  -  total flux cleaned = 0.000511157 Jy
! Component: 400  -  total flux cleaned = 0.000835417 Jy
! Component: 450  -  total flux cleaned = 0.00115235 Jy
! Component: 500  -  total flux cleaned = 0.00138485 Jy
! Component: 550  -  total flux cleaned = 0.00153714 Jy
! Component: 600  -  total flux cleaned = 0.00168485 Jy
! Component: 650  -  total flux cleaned = 0.00182946 Jy
! Component: 700  -  total flux cleaned = 0.00204339 Jy
! Component: 750  -  total flux cleaned = 0.00204331 Jy
! Component: 800  -  total flux cleaned = 0.00211223 Jy
! Component: 850  -  total flux cleaned = 0.00218022 Jy
! Component: 900  -  total flux cleaned = 0.00217975 Jy
! Component: 950  -  total flux cleaned = 0.00217895 Jy
! Component: 1000  -  total flux cleaned = 0.00211358 Jy
! Component: 1050  -  total flux cleaned = 0.0019226 Jy
! Component: 1100  -  total flux cleaned = 0.001923 Jy
! Component: 1150  -  total flux cleaned = 0.00167598 Jy
! Component: 1200  -  total flux cleaned = 0.00179749 Jy
! Component: 1250  -  total flux cleaned = 0.00155723 Jy
! Component: 1300  -  total flux cleaned = 0.00155802 Jy
! Component: 1350  -  total flux cleaned = 0.00144078 Jy
! Component: 1400  -  total flux cleaned = 0.00161445 Jy
! Component: 1450  -  total flux cleaned = 0.00167163 Jy
! Component: 1500  -  total flux cleaned = 0.00184148 Jy
! Component: 1550  -  total flux cleaned = 0.00184194 Jy
! Component: 1600  -  total flux cleaned = 0.00217394 Jy
! Component: 1650  -  total flux cleaned = 0.00233608 Jy
! Component: 1700  -  total flux cleaned = 0.0022274 Jy
! Component: 1750  -  total flux cleaned = 0.00233476 Jy
! Component: 1800  -  total flux cleaned = 0.00275867 Jy
! Component: 1850  -  total flux cleaned = 0.00275802 Jy
! Component: 1900  -  total flux cleaned = 0.00281045 Jy
! Component: 1950  -  total flux cleaned = 0.00306901 Jy
! Component: 2000  -  total flux cleaned = 0.00301768 Jy
! Component: 2050  -  total flux cleaned = 0.0031188 Jy
! Component: 2100  -  total flux cleaned = 0.0031696 Jy
! Component: 2150  -  total flux cleaned = 0.00336911 Jy
! Component: 2200  -  total flux cleaned = 0.00327054 Jy
! Component: 2250  -  total flux cleaned = 0.00346542 Jy
! Component: 2300  -  total flux cleaned = 0.00331981 Jy
! Component: 2350  -  total flux cleaned = 0.00341605 Jy
! Component: 2400  -  total flux cleaned = 0.00312987 Jy
! Component: 2450  -  total flux cleaned = 0.00350969 Jy
! Component: 2500  -  total flux cleaned = 0.00336788 Jy
! Component: 2550  -  total flux cleaned = 0.00327468 Jy
! Component: 2600  -  total flux cleaned = 0.00336703 Jy
! Component: 2650  -  total flux cleaned = 0.00322894 Jy
! Component: 2700  -  total flux cleaned = 0.00318332 Jy
! Component: 2750  -  total flux cleaned = 0.00295691 Jy
! Component: 2800  -  total flux cleaned = 0.00273238 Jy
! Component: 2850  -  total flux cleaned = 0.00291049 Jy
! Component: 2900  -  total flux cleaned = 0.00259995 Jy
! Component: 2950  -  total flux cleaned = 0.00251166 Jy
! Component: 3000  -  total flux cleaned = 0.0023366 Jy
! Component: 3050  -  total flux cleaned = 0.00220662 Jy
! Component: 3100  -  total flux cleaned = 0.00190441 Jy
! Component: 3150  -  total flux cleaned = 0.00169041 Jy
! Component: 3200  -  total flux cleaned = 0.00160535 Jy
! Component: 3250  -  total flux cleaned = 0.00156281 Jy
! Component: 3300  -  total flux cleaned = 0.00143676 Jy
! Component: 3350  -  total flux cleaned = 0.00131167 Jy
! Component: 3400  -  total flux cleaned = 0.00110413 Jy
! Component: 3450  -  total flux cleaned = 0.000856761 Jy
! Component: 3500  -  total flux cleaned = 0.000651619 Jy
! Component: 3550  -  total flux cleaned = 0.000651795 Jy
! Component: 3600  -  total flux cleaned = 0.000530553 Jy
! Component: 3650  -  total flux cleaned = 0.000248955 Jy
! Component: 3700  -  total flux cleaned = 8.9117e-05 Jy
! Component: 3750  -  total flux cleaned = -0.000189301 Jy
! Component: 3800  -  total flux cleaned = -0.000386968 Jy
! Component: 3850  -  total flux cleaned = -0.000583544 Jy
! Component: 3900  -  total flux cleaned = -0.000779053 Jy
! Component: 3950  -  total flux cleaned = -0.000934643 Jy
! Component: 4000  -  total flux cleaned = -0.00108921 Jy
! Component: 4050  -  total flux cleaned = -0.00108942 Jy
! Total flux subtracted in 4096 components = -0.00135738 Jy
! Clean residual min=-0.002836 max=0.002134 Jy/beam
! Clean residual mean=0.000006 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.824457 Jy
keep
! Adding 307 model components to the UV plane model.
! The established model now contains 395 components and 0.824457 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1058+8114_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.935 x 2.251 at -81.61 degrees (North through East)
! Clean map  min=-0.0063131  max=0.5906 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1058+8114_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.590598 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000658392 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.334437 0.334437 0.668874 1.33775 2.6755 5.35099 10.702 21.404 42.8079 85.6159
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0019 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.59 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1058+8114_X_uvs.log closed on Sat Oct  5 18:52:47 2013