! Started logfile: /g0/scr/pima/npcsb_uvs/J1054+8629_S_uvs.log on Sat Oct  5 18:58:26 2013
obs /g0/scr/pima/npcsb_uvs/J1054+8629_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1054+8629_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J1054+8629
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7728 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1054+8629_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.021743Jy  sigma=1.361508
! Fit after  self-cal, rms=0.860627Jy  sigma=1.049294
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.019 mas, bmaj=10.04 mas, bpa=6.596 degrees
! Estimated noise=13.9452 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127794 Jy
! Component: 100  -  total flux cleaned = 0.169054 Jy
! Total flux subtracted in 100 components = 0.169054 Jy
! Clean residual min=-0.012073 max=0.017556 Jy/beam
! Clean residual mean=-0.000023 rms=0.003471 Jy/beam
! Combined flux in latest and established models = 0.169054 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.169054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106193Jy  sigma=0.148189
! Fit after  self-cal, rms=0.106089Jy  sigma=0.148069
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.917 mas, bmaj=11 mas, bpa=5.092 degrees
! Estimated noise=6.76889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0259256 Jy
! Component: 100  -  total flux cleaned = 0.03694 Jy
! Component: 150  -  total flux cleaned = 0.0433272 Jy
! Component: 200  -  total flux cleaned = 0.0473806 Jy
! Total flux subtracted in 200 components = 0.0473806 Jy
! Clean residual min=-0.009657 max=0.013044 Jy/beam
! Clean residual mean=-0.000040 rms=0.002697 Jy/beam
! Combined flux in latest and established models = 0.216435 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 55 components and 0.216435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105817Jy  sigma=0.133901
! Fit after  self-cal, rms=0.105792Jy  sigma=0.133840
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.94     HN        0.86     KP        0.94     
!   LA        1.03     MK        0.81     NL        1.16     OV        0.98     
!   PT        1.01     SC        0.83     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.87     KP        0.94     
!   LA        0.97     MK        0.77     NL        1.20     OV        1.00     
!   PT        0.96     SC        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.99     HN        0.93     KP        0.95     
!   LA        0.75     MK        0.91     NL        1.28     OV        1.04     
!   PT        1.05     SC        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.87     KP        0.89     
!   LA        0.65     MK        0.89     NL        1.20     OV        0.86     
!   PT        0.91     SC        0.92     
! 
! 
! Fit before self-cal, rms=0.105792Jy  sigma=0.133840
! Fit after  self-cal, rms=0.094630Jy  sigma=0.121090
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.816 mas, bmaj=10.85 mas, bpa=5.495 degrees
! Estimated noise=6.0295 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0128063 Jy
! Component: 100  -  total flux cleaned = -0.0144418 Jy
! Component: 150  -  total flux cleaned = -0.0145296 Jy
! Component: 200  -  total flux cleaned = -0.0145952 Jy
! Total flux subtracted in 200 components = -0.0145952 Jy
! Clean residual min=-0.003919 max=0.003450 Jy/beam
! Clean residual mean=-0.000026 rms=0.000912 Jy/beam
! Combined flux in latest and established models = 0.20184 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.20184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089412Jy  sigma=0.123138
! Fit after  self-cal, rms=0.089626Jy  sigma=0.122978
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089626Jy  sigma=0.122978
! Fit after  self-cal, rms=0.085623Jy  sigma=0.120879
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.763 mas, bmaj=10.81 mas, bpa=5.85 degrees
! Estimated noise=5.4898 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0113396 Jy
! Component: 100  -  total flux cleaned = -0.0141159 Jy
! Component: 150  -  total flux cleaned = -0.014252 Jy
! Component: 200  -  total flux cleaned = -0.014113 Jy
! Total flux subtracted in 200 components = -0.014113 Jy
! Clean residual min=-0.003441 max=0.003342 Jy/beam
! Clean residual mean=-0.000024 rms=0.000836 Jy/beam
! Combined flux in latest and established models = 0.187726 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 79 components and 0.187726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081131Jy  sigma=0.122995
! Fit after  self-cal, rms=0.081123Jy  sigma=0.122986
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000147551 Jy
! Component: 100  -  total flux cleaned = 0.000110792 Jy
! Component: 150  -  total flux cleaned = 7.83607e-05 Jy
! Component: 200  -  total flux cleaned = 7.92822e-05 Jy
! Total flux subtracted in 200 components = 7.92822e-05 Jy
! Clean residual min=-0.003430 max=0.003367 Jy/beam
! Clean residual mean=-0.000024 rms=0.000827 Jy/beam
! Combined flux in latest and established models = 0.187806 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 85 components and 0.187806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081008Jy  sigma=0.123018
! Fit after  self-cal, rms=0.081007Jy  sigma=0.123016
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081007Jy  sigma=0.123016
! Fit after  self-cal, rms=0.077420Jy  sigma=0.120871
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.714 mas, bmaj=10.78 mas, bpa=6.184 degrees
! Estimated noise=4.996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00991748 Jy
! Component: 100  -  total flux cleaned = -0.0125318 Jy
! Component: 150  -  total flux cleaned = -0.013147 Jy
! Component: 200  -  total flux cleaned = -0.0132445 Jy
! Total flux subtracted in 200 components = -0.0132445 Jy
! Clean residual min=-0.003173 max=0.003239 Jy/beam
! Clean residual mean=-0.000022 rms=0.000773 Jy/beam
! Combined flux in latest and established models = 0.174561 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 94 components and 0.174561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073559Jy  sigma=0.123041
! Fit after  self-cal, rms=0.073552Jy  sigma=0.123037
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.20163e-05 Jy
! Component: 100  -  total flux cleaned = -4.52957e-05 Jy
! Component: 150  -  total flux cleaned = -4.49949e-05 Jy
! Component: 200  -  total flux cleaned = -4.52691e-05 Jy
! Total flux subtracted in 200 components = -4.52691e-05 Jy
! Clean residual min=-0.003172 max=0.003227 Jy/beam
! Clean residual mean=-0.000022 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.174516 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 97 components and 0.174516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073504Jy  sigma=0.123060
! Fit after  self-cal, rms=0.073505Jy  sigma=0.123059
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073505Jy  sigma=0.123059
! Fit after  self-cal, rms=0.070438Jy  sigma=0.120932
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.613 mas, bmaj=13.28 mas, bpa=6.244 degrees
! Estimated noise=5.20664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00928674 Jy
! Component: 100  -  total flux cleaned = -0.0113593 Jy
! Component: 150  -  total flux cleaned = -0.0114998 Jy
! Component: 200  -  total flux cleaned = -0.0115801 Jy
! Total flux subtracted in 200 components = -0.0115801 Jy
! Clean residual min=-0.003149 max=0.003240 Jy/beam
! Clean residual mean=-0.000035 rms=0.000987 Jy/beam
! Combined flux in latest and established models = 0.162936 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 106 components and 0.162936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066956Jy  sigma=0.123230
! Fit after  self-cal, rms=0.066946Jy  sigma=0.123213
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.38326e-05 Jy
! Component: 100  -  total flux cleaned = -7.18561e-05 Jy
! Component: 150  -  total flux cleaned = -5.55223e-05 Jy
! Component: 200  -  total flux cleaned = -5.5381e-05 Jy
! Total flux subtracted in 200 components = -5.5381e-05 Jy
! Clean residual min=-0.003105 max=0.003189 Jy/beam
! Clean residual mean=-0.000035 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.16288 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 111 components and 0.16288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066891Jy  sigma=0.123282
! Fit after  self-cal, rms=0.066894Jy  sigma=0.123277
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.677 mas, bmaj=10.76 mas, bpa=6.458 degrees
! Estimated noise=4.55417 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.677 x 10.76 at 6.458 degrees (North through East)
! Clean map  min=-0.0028258  max=0.11709 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.873 mas, bmaj=9.85 mas, bpa=7.982 degrees
! Estimated noise=8.90361 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0832985 Jy
! Component: 100  -  total flux cleaned = 0.114983 Jy
! Component: 150  -  total flux cleaned = 0.130929 Jy
! Component: 200  -  total flux cleaned = 0.140605 Jy
! Total flux subtracted in 200 components = 0.140605 Jy
! Clean residual min=-0.005763 max=0.006683 Jy/beam
! Clean residual mean=-0.000013 rms=0.001416 Jy/beam
! Combined flux in latest and established models = 0.140605 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.140605 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.677 mas, bmaj=10.76 mas, bpa=6.458 degrees
! Estimated noise=4.55417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00923317 Jy
! Component: 100  -  total flux cleaned = 0.0141602 Jy
! Component: 150  -  total flux cleaned = 0.0170601 Jy
! Component: 200  -  total flux cleaned = 0.0188023 Jy
! Total flux subtracted in 200 components = 0.0188023 Jy
! Clean residual min=-0.003089 max=0.002779 Jy/beam
! Clean residual mean=-0.000024 rms=0.000747 Jy/beam
! Combined flux in latest and established models = 0.159407 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 60 components and 0.159407 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.613 mas, bmaj=13.28 mas, bpa=6.244 degrees
! Estimated noise=5.20664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195558 Jy
! Component: 100  -  total flux cleaned = 0.00281203 Jy
! Component: 150  -  total flux cleaned = 0.00300802 Jy
! Component: 200  -  total flux cleaned = 0.00305806 Jy
! Total flux subtracted in 200 components = 0.00305806 Jy
! Clean residual min=-0.003259 max=0.003146 Jy/beam
! Clean residual mean=-0.000036 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.162465 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.12254e-05 Jy
! Component: 100  -  total flux cleaned = 6.08541e-05 Jy
! Component: 150  -  total flux cleaned = 8.90173e-05 Jy
! Component: 200  -  total flux cleaned = 0.000115985 Jy
! Total flux subtracted in 200 components = 0.000115985 Jy
! Clean residual min=-0.003250 max=0.003147 Jy/beam
! Clean residual mean=-0.000036 rms=0.000992 Jy/beam
! Combined flux in latest and established models = 0.162581 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 70 components and 0.162581 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.677 mas, bmaj=10.76 mas, bpa=6.458 degrees
! Estimated noise=4.55417 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00048527 Jy
! Component: 100  -  total flux cleaned = -0.000487187 Jy
! Component: 150  -  total flux cleaned = -0.00048747 Jy
! Component: 200  -  total flux cleaned = -0.000488298 Jy
! Total flux subtracted in 200 components = -0.000488298 Jy
! Clean residual min=-0.002959 max=0.002715 Jy/beam
! Clean residual mean=-0.000019 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.162093 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 83 components and 0.162093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066850Jy  sigma=0.123295
! Fit after  self-cal, rms=0.066847Jy  sigma=0.123288
wmodel /g0/scr/pima/npcsb_uvs/J1054+8629_S_map.mod
! Writing 83 model components to file: /g0/scr/pima/npcsb_uvs/J1054+8629_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J1054+8629_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1054+8629_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J1054+8629_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J1054+8629_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000440153 Jy
! Component: 100  -  total flux cleaned = -0.000484321 Jy
! Component: 150  -  total flux cleaned = -0.000402653 Jy
! Component: 200  -  total flux cleaned = -0.000401843 Jy
! Component: 250  -  total flux cleaned = -0.000401909 Jy
! Component: 300  -  total flux cleaned = -0.00033254 Jy
! Component: 350  -  total flux cleaned = -0.000431449 Jy
! Component: 400  -  total flux cleaned = -0.000559501 Jy
! Component: 450  -  total flux cleaned = -0.000652738 Jy
! Component: 500  -  total flux cleaned = -0.000803922 Jy
! Component: 550  -  total flux cleaned = -0.000921003 Jy
! Component: 600  -  total flux cleaned = -0.00103427 Jy
! Component: 650  -  total flux cleaned = -0.00114468 Jy
! Component: 700  -  total flux cleaned = -0.0011988 Jy
! Component: 750  -  total flux cleaned = -0.00135666 Jy
! Component: 800  -  total flux cleaned = -0.00138198 Jy
! Component: 850  -  total flux cleaned = -0.00150814 Jy
! Component: 900  -  total flux cleaned = -0.00170472 Jy
! Component: 950  -  total flux cleaned = -0.00187294 Jy
! Component: 1000  -  total flux cleaned = -0.00196735 Jy
! Component: 1050  -  total flux cleaned = -0.00205985 Jy
! Component: 1100  -  total flux cleaned = -0.00215061 Jy
! Component: 1150  -  total flux cleaned = -0.0021952 Jy
! Component: 1200  -  total flux cleaned = -0.00223894 Jy
! Component: 1250  -  total flux cleaned = -0.00228238 Jy
! Component: 1300  -  total flux cleaned = -0.00226109 Jy
! Component: 1350  -  total flux cleaned = -0.0023242 Jy
! Component: 1400  -  total flux cleaned = -0.00234498 Jy
! Component: 1450  -  total flux cleaned = -0.00244682 Jy
! Component: 1500  -  total flux cleaned = -0.00246675 Jy
! Component: 1550  -  total flux cleaned = -0.00246689 Jy
! Component: 1600  -  total flux cleaned = -0.00244739 Jy
! Component: 1650  -  total flux cleaned = -0.00256405 Jy
! Component: 1700  -  total flux cleaned = -0.00258335 Jy
! Component: 1750  -  total flux cleaned = -0.00258331 Jy
! Component: 1800  -  total flux cleaned = -0.00263997 Jy
! Component: 1850  -  total flux cleaned = -0.00271429 Jy
! Component: 1900  -  total flux cleaned = -0.00273247 Jy
! Component: 1950  -  total flux cleaned = -0.00282375 Jy
! Component: 2000  -  total flux cleaned = -0.00291395 Jy
! Component: 2050  -  total flux cleaned = -0.00294945 Jy
! Component: 2100  -  total flux cleaned = -0.00300242 Jy
! Component: 2150  -  total flux cleaned = -0.00303752 Jy
! Component: 2200  -  total flux cleaned = -0.00310694 Jy
! Component: 2250  -  total flux cleaned = -0.00317549 Jy
! Component: 2300  -  total flux cleaned = -0.0031756 Jy
! Component: 2350  -  total flux cleaned = -0.00324305 Jy
! Component: 2400  -  total flux cleaned = -0.0033265 Jy
! Component: 2450  -  total flux cleaned = -0.00332656 Jy
! Component: 2500  -  total flux cleaned = -0.00337592 Jy
! Component: 2550  -  total flux cleaned = -0.00342466 Jy
! Component: 2600  -  total flux cleaned = -0.0033926 Jy
! Component: 2650  -  total flux cleaned = -0.0034723 Jy
! Component: 2700  -  total flux cleaned = -0.00340923 Jy
! Component: 2750  -  total flux cleaned = -0.00345641 Jy
! Component: 2800  -  total flux cleaned = -0.00351848 Jy
! Component: 2850  -  total flux cleaned = -0.00351857 Jy
! Component: 2900  -  total flux cleaned = -0.00350354 Jy
! Component: 2950  -  total flux cleaned = -0.00353391 Jy
! Component: 3000  -  total flux cleaned = -0.00354916 Jy
! Component: 3050  -  total flux cleaned = -0.00356428 Jy
! Component: 3100  -  total flux cleaned = -0.00359395 Jy
! Component: 3150  -  total flux cleaned = -0.00362342 Jy
! Component: 3200  -  total flux cleaned = -0.0036382 Jy
! Component: 3250  -  total flux cleaned = -0.00368183 Jy
! Component: 3300  -  total flux cleaned = -0.00375395 Jy
! Component: 3350  -  total flux cleaned = -0.00375402 Jy
! Component: 3400  -  total flux cleaned = -0.00379668 Jy
! Component: 3450  -  total flux cleaned = -0.00378234 Jy
! Component: 3500  -  total flux cleaned = -0.00379637 Jy
! Component: 3550  -  total flux cleaned = -0.00388013 Jy
! Component: 3600  -  total flux cleaned = -0.00386624 Jy
! Component: 3650  -  total flux cleaned = -0.00389396 Jy
! Component: 3700  -  total flux cleaned = -0.00390777 Jy
! Component: 3750  -  total flux cleaned = -0.00392149 Jy
! Component: 3800  -  total flux cleaned = -0.00400294 Jy
! Component: 3850  -  total flux cleaned = -0.00396241 Jy
! Component: 3900  -  total flux cleaned = -0.00397595 Jy
! Component: 3950  -  total flux cleaned = -0.00402952 Jy
! Component: 4000  -  total flux cleaned = -0.00404285 Jy
! Component: 4050  -  total flux cleaned = -0.00413516 Jy
! Total flux subtracted in 4096 components = -0.00409583 Jy
! Clean residual min=-0.000930 max=0.000721 Jy/beam
! Clean residual mean=-0.000002 rms=0.000251 Jy/beam
! Combined flux in latest and established models = 0.157997 Jy
keep
! Adding 326 model components to the UV plane model.
! The established model now contains 409 components and 0.157997 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J1054+8629_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.677 x 10.76 at 6.458 degrees (North through East)
! Clean map  min=-0.0016916  max=0.11687 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1054+8629_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.116869 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000249174 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.639626 0.639626 1.27925 2.5585 5.11701 10.234 20.468 40.9361 81.8721
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.116 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J1054+8629_S_uvs.log closed on Sat Oct  5 18:58:30 2013