! Started logfile: /g0/scr/pima/npcsb_uvs/J1010+8250_S_uvs.log on Sat Oct 5 18:58:10 2013 obs /g0/scr/pima/npcsb_uvs/J1010+8250_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J1010+8250_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1010+8250 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8100 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J1010+8250_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.041989Jy sigma=2.191319 ! Fit after self-cal, rms=0.774626Jy sigma=1.365165 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.428 mas, bmaj=9.997 mas, bpa=7.595 degrees ! Estimated noise=10.0083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.200667 Jy ! Component: 100 - total flux cleaned = 0.270348 Jy ! Total flux subtracted in 100 components = 0.270348 Jy ! Clean residual min=-0.026799 max=0.040293 Jy/beam ! Clean residual mean=-0.000056 rms=0.008277 Jy/beam ! Combined flux in latest and established models = 0.270348 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.270348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131198Jy sigma=0.312338 ! Fit after self-cal, rms=0.130582Jy sigma=0.311845 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.482 mas, bmaj=10.82 mas, bpa=6.411 degrees ! Estimated noise=4.33998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.050879 Jy ! Component: 100 - total flux cleaned = 0.0699999 Jy ! Component: 150 - total flux cleaned = 0.0696823 Jy ! Component: 200 - total flux cleaned = 0.0687492 Jy ! Total flux subtracted in 200 components = 0.0687492 Jy ! Clean residual min=-0.022186 max=0.036613 Jy/beam ! Clean residual mean=-0.000050 rms=0.007441 Jy/beam ! Combined flux in latest and established models = 0.339097 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 0.339097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127057Jy sigma=0.251786 ! Fit after self-cal, rms=0.126899Jy sigma=0.251515 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 1.00 HN 0.98 KP 0.95 ! LA 1.05 MK 0.94 NL 1.54 OV 0.93 ! PT 1.04 SC 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.05 HN 1.01 KP 0.98 ! LA 0.95 MK 0.92 NL 1.63 OV 0.97 ! PT 0.96 SC 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.75 FD 1.08 HN 0.97 KP 0.97 ! LA 0.83 MK 1.03 NL 1.72 OV 0.99 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.04 HN 0.93 KP 0.90 ! LA 0.70 MK 1.04 NL 1.69 OV 0.88 ! PT 0.90 SC 1.03 ! ! ! Fit before self-cal, rms=0.126899Jy sigma=0.251515 ! Fit after self-cal, rms=0.112614Jy sigma=0.198837 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=10.7 mas, bpa=6.82 degrees ! Estimated noise=4.11213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169235 Jy ! Component: 100 - total flux cleaned = 0.0195943 Jy ! Component: 150 - total flux cleaned = 0.0199341 Jy ! Component: 200 - total flux cleaned = 0.0202304 Jy ! Total flux subtracted in 200 components = 0.0202304 Jy ! Clean residual min=-0.007867 max=0.011871 Jy/beam ! Clean residual mean=-0.000008 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.359327 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 66 components and 0.359327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104982Jy sigma=0.185356 ! Fit after self-cal, rms=0.104846Jy sigma=0.184298 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104846Jy sigma=0.184298 ! Fit after self-cal, rms=0.102687Jy sigma=0.182110 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=10.67 mas, bpa=6.816 degrees ! Estimated noise=3.94848 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00525104 Jy ! Component: 100 - total flux cleaned = -0.0038003 Jy ! Component: 150 - total flux cleaned = -0.00379737 Jy ! Component: 200 - total flux cleaned = -0.00357334 Jy ! Total flux subtracted in 200 components = -0.00357334 Jy ! Clean residual min=-0.006662 max=0.008814 Jy/beam ! Clean residual mean=-0.000004 rms=0.002020 Jy/beam ! Combined flux in latest and established models = 0.355754 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 91 components and 0.355754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098595Jy sigma=0.181472 ! Fit after self-cal, rms=0.098389Jy sigma=0.181317 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (22.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00871483 Jy ! Component: 100 - total flux cleaned = 0.0114429 Jy ! Component: 150 - total flux cleaned = 0.0123456 Jy ! Component: 200 - total flux cleaned = 0.0131555 Jy ! Total flux subtracted in 200 components = 0.0131555 Jy ! Clean residual min=-0.005371 max=0.006036 Jy/beam ! Clean residual mean=-0.000000 rms=0.001456 Jy/beam ! Combined flux in latest and established models = 0.36891 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 130 components and 0.36891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097200Jy sigma=0.178786 ! Fit after self-cal, rms=0.097037Jy sigma=0.178627 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097037Jy sigma=0.178627 ! Fit after self-cal, rms=0.095030Jy sigma=0.176851 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=10.64 mas, bpa=6.797 degrees ! Estimated noise=3.77978 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00822242 Jy ! Component: 100 - total flux cleaned = -0.00752957 Jy ! Component: 150 - total flux cleaned = -0.00680061 Jy ! Component: 200 - total flux cleaned = -0.00615069 Jy ! Total flux subtracted in 200 components = -0.00615069 Jy ! Clean residual min=-0.004713 max=0.005431 Jy/beam ! Clean residual mean=-0.000000 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.362759 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 158 components and 0.362759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091798Jy sigma=0.177784 ! Fit after self-cal, rms=0.091698Jy sigma=0.177716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (66.5, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311513 Jy ! Component: 100 - total flux cleaned = 0.00456131 Jy ! Component: 150 - total flux cleaned = 0.00583616 Jy ! Component: 200 - total flux cleaned = 0.00689379 Jy ! Total flux subtracted in 200 components = 0.00689379 Jy ! Clean residual min=-0.003975 max=0.003702 Jy/beam ! Clean residual mean=-0.000003 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.369653 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 194 components and 0.369653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091098Jy sigma=0.177059 ! Fit after self-cal, rms=0.091029Jy sigma=0.177008 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091029Jy sigma=0.177008 ! Fit after self-cal, rms=0.089429Jy sigma=0.175341 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.408 mas, bmaj=12.51 mas, bpa=17.81 degrees ! Estimated noise=3.7954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00698898 Jy ! Component: 100 - total flux cleaned = -0.00482906 Jy ! Component: 150 - total flux cleaned = -0.00335348 Jy ! Component: 200 - total flux cleaned = -0.00251047 Jy ! Total flux subtracted in 200 components = -0.00251047 Jy ! Clean residual min=-0.003501 max=0.003548 Jy/beam ! Clean residual mean=-0.000007 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.367142 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 219 components and 0.367142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086734Jy sigma=0.176579 ! Fit after self-cal, rms=0.086682Jy sigma=0.176530 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106842 Jy ! Component: 100 - total flux cleaned = 0.00160847 Jy ! Component: 150 - total flux cleaned = 0.00200383 Jy ! Component: 200 - total flux cleaned = 0.0022861 Jy ! Total flux subtracted in 200 components = 0.0022861 Jy ! Clean residual min=-0.003263 max=0.003418 Jy/beam ! Clean residual mean=-0.000006 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.369428 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 234 components and 0.369428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086283Jy sigma=0.176576 ! Fit after self-cal, rms=0.086248Jy sigma=0.176554 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.63 mas, bpa=6.81 degrees ! Estimated noise=3.6232 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 10.63 at 6.81 degrees (North through East) ! Clean map min=-0.0084546 max=0.23583 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=9.939 mas, bpa=7.789 degrees ! Estimated noise=8.06358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.162874 Jy ! Component: 100 - total flux cleaned = 0.223352 Jy ! Component: 150 - total flux cleaned = 0.256524 Jy ! Component: 200 - total flux cleaned = 0.277231 Jy ! Total flux subtracted in 200 components = 0.277231 Jy ! Clean residual min=-0.010113 max=0.011268 Jy/beam ! Clean residual mean=-0.000023 rms=0.003271 Jy/beam ! Combined flux in latest and established models = 0.277231 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.277231 Jy ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.63 mas, bpa=6.81 degrees ! Estimated noise=3.6232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230805 Jy ! Component: 100 - total flux cleaned = 0.0383248 Jy ! Component: 150 - total flux cleaned = 0.0496185 Jy ! Component: 200 - total flux cleaned = 0.0585271 Jy ! Total flux subtracted in 200 components = 0.0585271 Jy ! Clean residual min=-0.006609 max=0.007581 Jy/beam ! Clean residual mean=-0.000017 rms=0.002174 Jy/beam ! Combined flux in latest and established models = 0.335758 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 78 components and 0.335758 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.408 mas, bmaj=12.51 mas, bpa=17.81 degrees ! Estimated noise=3.7954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112111 Jy ! Component: 100 - total flux cleaned = 0.0166153 Jy ! Component: 150 - total flux cleaned = 0.0193159 Jy ! Component: 200 - total flux cleaned = 0.0220526 Jy ! Total flux subtracted in 200 components = 0.0220526 Jy ! Clean residual min=-0.005162 max=0.006353 Jy/beam ! Clean residual mean=-0.000016 rms=0.001759 Jy/beam ! Combined flux in latest and established models = 0.357811 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00214639 Jy ! Component: 100 - total flux cleaned = 0.00401207 Jy ! Component: 150 - total flux cleaned = 0.00565416 Jy ! Component: 200 - total flux cleaned = 0.00685522 Jy ! Total flux subtracted in 200 components = 0.00685522 Jy ! Clean residual min=-0.004173 max=0.004710 Jy/beam ! Clean residual mean=-0.000011 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.364666 Jy ! Adding 120 model components to the UV plane model. ! The established model now contains 190 components and 0.364666 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=10.63 mas, bpa=6.81 degrees ! Estimated noise=3.6232 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671058 Jy ! Component: 100 - total flux cleaned = 0.0015793 Jy ! Component: 150 - total flux cleaned = 0.00223439 Jy ! Component: 200 - total flux cleaned = 0.00292974 Jy ! Total flux subtracted in 200 components = 0.00292974 Jy ! Clean residual min=-0.003939 max=0.003744 Jy/beam ! Clean residual mean=-0.000005 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.367596 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 224 components and 0.367596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085652Jy sigma=0.177612 ! Fit after self-cal, rms=0.085519Jy sigma=0.177302 wmodel /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.mod ! Writing 224 model components to file: /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J1010+8250_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J1010+8250_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.win ! wwins: Wrote 4 windows to /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.53243e-05 Jy ! Component: 100 - total flux cleaned = 0.000455506 Jy ! Component: 150 - total flux cleaned = 0.000816445 Jy ! Component: 200 - total flux cleaned = 0.00115485 Jy ! Component: 250 - total flux cleaned = 0.00138228 Jy ! Component: 300 - total flux cleaned = 0.00138082 Jy ! Component: 350 - total flux cleaned = 0.00133842 Jy ! Component: 400 - total flux cleaned = 0.00125618 Jy ! Component: 450 - total flux cleaned = 0.00117537 Jy ! Component: 500 - total flux cleaned = 0.000986654 Jy ! Component: 550 - total flux cleaned = 0.000876561 Jy ! Component: 600 - total flux cleaned = 0.000663054 Jy ! Component: 650 - total flux cleaned = 0.000663262 Jy ! Component: 700 - total flux cleaned = 0.000730692 Jy ! Component: 750 - total flux cleaned = 0.000796212 Jy ! Component: 800 - total flux cleaned = 0.00079626 Jy ! Component: 850 - total flux cleaned = 0.000827613 Jy ! Component: 900 - total flux cleaned = 0.000828149 Jy ! Component: 950 - total flux cleaned = 0.000888652 Jy ! Component: 1000 - total flux cleaned = 0.000918427 Jy ! Component: 1050 - total flux cleaned = 0.000889071 Jy ! Component: 1100 - total flux cleaned = 0.000888594 Jy ! Component: 1150 - total flux cleaned = 0.000973579 Jy ! Component: 1200 - total flux cleaned = 0.00102817 Jy ! Component: 1250 - total flux cleaned = 0.00108207 Jy ! Component: 1300 - total flux cleaned = 0.00105562 Jy ! Component: 1350 - total flux cleaned = 0.00118711 Jy ! Component: 1400 - total flux cleaned = 0.00123927 Jy ! Component: 1450 - total flux cleaned = 0.00134184 Jy ! Component: 1500 - total flux cleaned = 0.00141782 Jy ! Component: 1550 - total flux cleaned = 0.00154285 Jy ! Component: 1600 - total flux cleaned = 0.00164156 Jy ! Component: 1650 - total flux cleaned = 0.0017637 Jy ! Component: 1700 - total flux cleaned = 0.00195659 Jy ! Component: 1750 - total flux cleaned = 0.00202861 Jy ! Component: 1800 - total flux cleaned = 0.00209956 Jy ! Component: 1850 - total flux cleaned = 0.0022158 Jy ! Component: 1900 - total flux cleaned = 0.00230771 Jy ! Component: 1950 - total flux cleaned = 0.00244425 Jy ! Component: 2000 - total flux cleaned = 0.00242159 Jy ! Component: 2050 - total flux cleaned = 0.00244407 Jy ! Component: 2100 - total flux cleaned = 0.00253247 Jy ! Component: 2150 - total flux cleaned = 0.00264135 Jy ! Component: 2200 - total flux cleaned = 0.00279249 Jy ! Component: 2250 - total flux cleaned = 0.00274959 Jy ! Component: 2300 - total flux cleaned = 0.00281386 Jy ! Component: 2350 - total flux cleaned = 0.00285613 Jy ! Component: 2400 - total flux cleaned = 0.00291865 Jy ! Component: 2450 - total flux cleaned = 0.00291876 Jy ! Component: 2500 - total flux cleaned = 0.00298053 Jy ! Component: 2550 - total flux cleaned = 0.00306185 Jy ! Component: 2600 - total flux cleaned = 0.00304166 Jy ! Component: 2650 - total flux cleaned = 0.00308149 Jy ! Component: 2700 - total flux cleaned = 0.00312128 Jy ! Component: 2750 - total flux cleaned = 0.00310154 Jy ! Component: 2800 - total flux cleaned = 0.00314043 Jy ! Component: 2850 - total flux cleaned = 0.00317903 Jy ! Component: 2900 - total flux cleaned = 0.00312152 Jy ! Component: 2950 - total flux cleaned = 0.00319784 Jy ! Component: 3000 - total flux cleaned = 0.00323564 Jy ! Component: 3050 - total flux cleaned = 0.00329179 Jy ! Component: 3100 - total flux cleaned = 0.00329148 Jy ! Component: 3150 - total flux cleaned = 0.00327272 Jy ! Component: 3200 - total flux cleaned = 0.00330967 Jy ! Component: 3250 - total flux cleaned = 0.00338273 Jy ! Component: 3300 - total flux cleaned = 0.00331 Jy ! Component: 3350 - total flux cleaned = 0.0033642 Jy ! Component: 3400 - total flux cleaned = 0.00343579 Jy ! Component: 3450 - total flux cleaned = 0.0034179 Jy ! Component: 3500 - total flux cleaned = 0.00332959 Jy ! Component: 3550 - total flux cleaned = 0.00334726 Jy ! Component: 3600 - total flux cleaned = 0.00331228 Jy ! Component: 3650 - total flux cleaned = 0.00327748 Jy ! Component: 3700 - total flux cleaned = 0.00327745 Jy ! Component: 3750 - total flux cleaned = 0.00334607 Jy ! Component: 3800 - total flux cleaned = 0.00322657 Jy ! Component: 3850 - total flux cleaned = 0.00315882 Jy ! Component: 3900 - total flux cleaned = 0.00317577 Jy ! Component: 3950 - total flux cleaned = 0.00319269 Jy ! Component: 4000 - total flux cleaned = 0.00320949 Jy ! Component: 4050 - total flux cleaned = 0.00322609 Jy ! Total flux subtracted in 4096 components = 0.00320958 Jy ! Clean residual min=-0.000950 max=0.000935 Jy/beam ! Clean residual mean=0.000000 rms=0.000313 Jy/beam ! Combined flux in latest and established models = 0.370805 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 533 components and 0.370805 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J1010+8250_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.392 x 10.63 at 6.81 degrees (North through East) ! Clean map min=-0.0063877 max=0.22968 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J1010+8250_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.229682 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000311067 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.406302 0.406302 0.812603 1.62521 3.25041 6.50083 13.0017 26.0033 52.0066 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.229 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J1010+8250_S_uvs.log closed on Sat Oct 5 18:58:15 2013