! Started logfile: /g0/scr/pima/npcsb_uvs/J0948+4039_X_uvs.log on Sat Oct  5 18:52:28 2013
obs /g0/scr/pima/npcsb_uvs/J0948+4039_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0948+4039_X_uva.fits
! AN table 1: 16 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.719444 visibilities/baseline/integration-bin.
! Found source: J0948+4039
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2072 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0948+4039_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 26 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.216816Jy  sigma=8.706985
! Fit after  self-cal, rms=0.633973Jy  sigma=2.175528
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7453 mas, bmaj=2.517 mas, bpa=8.588 degrees
! Estimated noise=5.3195 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.517005 Jy
! Component: 100  -  total flux cleaned = 0.729953 Jy
! Total flux subtracted in 100 components = 0.729953 Jy
! Clean residual min=-0.078396 max=0.145347 Jy/beam
! Clean residual mean=0.000032 rms=0.026938 Jy/beam
! Combined flux in latest and established models = 0.729953 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.729953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.341154Jy  sigma=2.500757
! Fit after  self-cal, rms=0.337595Jy  sigma=2.496524
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9705 mas, bmaj=2.813 mas, bpa=9.566 degrees
! Estimated noise=3.0194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.19543 Jy
! Component: 100  -  total flux cleaned = 0.298077 Jy
! Component: 150  -  total flux cleaned = 0.356489 Jy
! Component: 200  -  total flux cleaned = 0.390363 Jy
! Total flux subtracted in 200 components = 0.390363 Jy
! Clean residual min=-0.069495 max=0.091613 Jy/beam
! Clean residual mean=-0.000040 rms=0.020233 Jy/beam
! Combined flux in latest and established models = 1.12032 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 36 components and 1.12032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.280762Jy  sigma=1.335718
! Fit after  self-cal, rms=0.278014Jy  sigma=1.331617
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        1.04     HN        3.86     KP        0.96     
!   LA        0.96     MK        0.89     NL        1.28     OV        1.06     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.03     HN        3.46     KP        0.90     
!   LA        0.92     MK        0.82     NL        1.22     OV        1.03     
!   PT        0.98     SC        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        1.04     HN        3.11     KP        0.80     
!   LA        0.93     MK        0.80     NL        1.25     OV        1.07     
!   PT        0.96     SC        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.07     HN        3.41     KP        0.88     
!   LA        0.92     MK        0.80     NL        1.17     OV        1.09     
!   PT        1.03     SC        0.94     
! 
! 
! Fit before self-cal, rms=0.278014Jy  sigma=1.331617
! Fit after  self-cal, rms=0.513831Jy  sigma=0.975291
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9612 mas, bmaj=2.947 mas, bpa=12.21 degrees
! Estimated noise=2.96774 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 11.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0416859 Jy
! Component: 100  -  total flux cleaned = 0.0414848 Jy
! Component: 150  -  total flux cleaned = 0.0403343 Jy
! Component: 200  -  total flux cleaned = 0.0382794 Jy
! Total flux subtracted in 200 components = 0.0382794 Jy
! Clean residual min=-0.031480 max=0.051491 Jy/beam
! Clean residual mean=-0.000017 rms=0.009696 Jy/beam
! Combined flux in latest and established models = 1.1586 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 53 components and 1.1586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.488419Jy  sigma=0.851765
! Fit after  self-cal, rms=0.493885Jy  sigma=0.841644
! Inverting map 
! Added new window around map position (-1.4, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0338525 Jy
! Component: 100  -  total flux cleaned = 0.038809 Jy
! Component: 150  -  total flux cleaned = 0.0409255 Jy
! Component: 200  -  total flux cleaned = 0.0408904 Jy
! Total flux subtracted in 200 components = 0.0408904 Jy
! Clean residual min=-0.028676 max=0.046959 Jy/beam
! Clean residual mean=-0.000008 rms=0.007829 Jy/beam
! Combined flux in latest and established models = 1.19949 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 1.19949 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.473628Jy  sigma=0.769753
! Fit after  self-cal, rms=0.469182Jy  sigma=0.755140
! Inverting map 
! Added new window around map position (-0.2, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0444703 Jy
! Component: 100  -  total flux cleaned = 0.051068 Jy
! Component: 150  -  total flux cleaned = 0.0519594 Jy
! Component: 200  -  total flux cleaned = 0.0494753 Jy
! Total flux subtracted in 200 components = 0.0494753 Jy
! Clean residual min=-0.026047 max=0.030544 Jy/beam
! Clean residual mean=-0.000003 rms=0.007016 Jy/beam
! Combined flux in latest and established models = 1.24896 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 1.24896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.446093Jy  sigma=0.717368
! Fit after  self-cal, rms=0.441681Jy  sigma=0.707862
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.441681Jy  sigma=0.707862
! Fit after  self-cal, rms=0.240698Jy  sigma=0.680449
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9509 mas, bmaj=2.894 mas, bpa=11.13 degrees
! Estimated noise=2.91927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00821907 Jy
! Component: 100  -  total flux cleaned = 0.00590383 Jy
! Component: 150  -  total flux cleaned = 0.00652611 Jy
! Component: 200  -  total flux cleaned = 0.00589351 Jy
! Total flux subtracted in 200 components = 0.00589351 Jy
! Clean residual min=-0.024753 max=0.024769 Jy/beam
! Clean residual mean=-0.000003 rms=0.005918 Jy/beam
! Combined flux in latest and established models = 1.25485 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 105 components and 1.25485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.225968Jy  sigma=0.662729
! Fit after  self-cal, rms=0.222510Jy  sigma=0.655069
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, -11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019638 Jy
! Component: 100  -  total flux cleaned = 0.0251238 Jy
! Component: 150  -  total flux cleaned = 0.032373 Jy
! Component: 200  -  total flux cleaned = 0.0396693 Jy
! Total flux subtracted in 200 components = 0.0396693 Jy
! Clean residual min=-0.022153 max=0.021247 Jy/beam
! Clean residual mean=-0.000003 rms=0.005386 Jy/beam
! Combined flux in latest and established models = 1.29452 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 120 components and 1.29452 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210272Jy  sigma=0.634886
! Fit after  self-cal, rms=0.207945Jy  sigma=0.627930
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.207945Jy  sigma=0.627930
! Fit after  self-cal, rms=0.185240Jy  sigma=0.623932
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9493 mas, bmaj=2.873 mas, bpa=10.85 degrees
! Estimated noise=2.90242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00712672 Jy
! Component: 100  -  total flux cleaned = 0.00885351 Jy
! Component: 150  -  total flux cleaned = 0.011963 Jy
! Component: 200  -  total flux cleaned = 0.0129315 Jy
! Total flux subtracted in 200 components = 0.0129315 Jy
! Clean residual min=-0.021623 max=0.020031 Jy/beam
! Clean residual mean=-0.000004 rms=0.004916 Jy/beam
! Combined flux in latest and established models = 1.30745 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 139 components and 1.30746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175388Jy  sigma=0.612793
! Fit after  self-cal, rms=0.173617Jy  sigma=0.608682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00373178 Jy
! Component: 100  -  total flux cleaned = 0.00412177 Jy
! Component: 150  -  total flux cleaned = 0.00767088 Jy
! Component: 200  -  total flux cleaned = 0.0101872 Jy
! Total flux subtracted in 200 components = 0.0101872 Jy
! Clean residual min=-0.020680 max=0.019906 Jy/beam
! Clean residual mean=-0.000003 rms=0.004681 Jy/beam
! Combined flux in latest and established models = 1.31764 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 153 components and 1.31764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.166472Jy  sigma=0.600133
! Fit after  self-cal, rms=0.164954Jy  sigma=0.596762
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164954Jy  sigma=0.596762
! Fit after  self-cal, rms=0.156257Jy  sigma=0.595237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.842 mas, bmaj=3.303 mas, bpa=26.46 degrees
! Estimated noise=2.62698 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277108 Jy
! Component: 100  -  total flux cleaned = 0.00153271 Jy
! Component: 150  -  total flux cleaned = 0.000445594 Jy
! Component: 200  -  total flux cleaned = -0.000841353 Jy
! Total flux subtracted in 200 components = -0.000841353 Jy
! Clean residual min=-0.016779 max=0.012814 Jy/beam
! Clean residual mean=-0.000004 rms=0.003463 Jy/beam
! Combined flux in latest and established models = 1.3168 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 170 components and 1.3168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153729Jy  sigma=0.590509
! Fit after  self-cal, rms=0.153385Jy  sigma=0.589658
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000945892 Jy
! Component: 100  -  total flux cleaned = -0.000342236 Jy
! Component: 150  -  total flux cleaned = -0.00107789 Jy
! Component: 200  -  total flux cleaned = -0.00107715 Jy
! Total flux subtracted in 200 components = -0.00107715 Jy
! Clean residual min=-0.015920 max=0.012610 Jy/beam
! Clean residual mean=-0.000005 rms=0.003362 Jy/beam
! Combined flux in latest and established models = 1.31572 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 177 components and 1.31572 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151353Jy  sigma=0.586176
! Fit after  self-cal, rms=0.151021Jy  sigma=0.585378
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9488 mas, bmaj=2.858 mas, bpa=10.67 degrees
! Estimated noise=2.88995 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9488 x 2.858 at 10.67 degrees (North through East)
! Clean map  min=-0.023888  max=0.61981 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151021Jy  sigma=0.585378
! Fit after  self-cal, rms=0.151419Jy  sigma=0.529981
! Inverting map and beam 
! Estimated beam: bmin=0.9597 mas, bmaj=2.856 mas, bpa=10.59 degrees
! Estimated noise=2.91119 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00447927 Jy
! Component: 100  -  total flux cleaned = 0.00671176 Jy
! Component: 150  -  total flux cleaned = 0.00751907 Jy
! Component: 200  -  total flux cleaned = 0.00752925 Jy
! Total flux subtracted in 200 components = 0.00752925 Jy
! Clean residual min=-0.019442 max=0.018193 Jy/beam
! Clean residual mean=-0.000003 rms=0.004163 Jy/beam
! Combined flux in latest and established models = 1.32325 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 194 components and 1.32325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145796Jy  sigma=0.520711
! Fit after  self-cal, rms=0.144473Jy  sigma=0.518385
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00216478 Jy
! Component: 100  -  total flux cleaned = 0.00516422 Jy
! Component: 150  -  total flux cleaned = 0.00586567 Jy
! Component: 200  -  total flux cleaned = 0.00653611 Jy
! Total flux subtracted in 200 components = 0.00653611 Jy
! Clean residual min=-0.018649 max=0.017667 Jy/beam
! Clean residual mean=-0.000003 rms=0.003983 Jy/beam
! Combined flux in latest and established models = 1.32979 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 201 components and 1.32979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140129Jy  sigma=0.510913
! Fit after  self-cal, rms=0.139123Jy  sigma=0.509048
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139123Jy  sigma=0.509048
! Fit after  self-cal, rms=0.137553Jy  sigma=0.508153
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7277 mas, bmaj=2.569 mas, bpa=9.68 degrees
! Estimated noise=5.24364 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.51342 Jy
! Component: 100  -  total flux cleaned = 0.754418 Jy
! Component: 150  -  total flux cleaned = 0.90042 Jy
! Component: 200  -  total flux cleaned = 0.993959 Jy
! Total flux subtracted in 200 components = 0.993959 Jy
! Clean residual min=-0.048785 max=0.059626 Jy/beam
! Clean residual mean=0.000013 rms=0.014110 Jy/beam
! Combined flux in latest and established models = 0.993958 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 31 model components to the UV plane model.
! The established model now contains 31 components and 0.993958 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9587 mas, bmaj=2.848 mas, bpa=10.52 degrees
! Estimated noise=2.90124 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0770882 Jy
! Component: 100  -  total flux cleaned = 0.116351 Jy
! Component: 150  -  total flux cleaned = 0.142531 Jy
! Component: 200  -  total flux cleaned = 0.161413 Jy
! Total flux subtracted in 200 components = 0.161413 Jy
! Clean residual min=-0.030724 max=0.033090 Jy/beam
! Clean residual mean=-0.000012 rms=0.008028 Jy/beam
! Combined flux in latest and established models = 1.15537 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 58 components and 1.15537 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.845 mas, bmaj=3.299 mas, bpa=25.93 degrees
! Estimated noise=2.62439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0328365 Jy
! Component: 100  -  total flux cleaned = 0.0528197 Jy
! Component: 150  -  total flux cleaned = 0.0593874 Jy
! Component: 200  -  total flux cleaned = 0.065987 Jy
! Total flux subtracted in 200 components = 0.065987 Jy
! Clean residual min=-0.024258 max=0.017882 Jy/beam
! Clean residual mean=-0.000012 rms=0.006219 Jy/beam
! Combined flux in latest and established models = 1.22136 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478732 Jy
! Component: 100  -  total flux cleaned = 0.00775292 Jy
! Component: 150  -  total flux cleaned = 0.0100755 Jy
! Component: 200  -  total flux cleaned = 0.0128832 Jy
! Total flux subtracted in 200 components = 0.0128832 Jy
! Clean residual min=-0.020957 max=0.015923 Jy/beam
! Clean residual mean=-0.000011 rms=0.005289 Jy/beam
! Combined flux in latest and established models = 1.23424 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 85 components and 1.23424 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9587 mas, bmaj=2.848 mas, bpa=10.52 degrees
! Estimated noise=2.90124 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190464 Jy
! Component: 100  -  total flux cleaned = 0.0103922 Jy
! Component: 150  -  total flux cleaned = 0.0156469 Jy
! Component: 200  -  total flux cleaned = 0.0183192 Jy
! Total flux subtracted in 200 components = 0.0183192 Jy
! Clean residual min=-0.022103 max=0.020569 Jy/beam
! Clean residual mean=-0.000006 rms=0.004790 Jy/beam
! Combined flux in latest and established models = 1.25256 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 106 components and 1.25256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144675Jy  sigma=0.536216
! Fit after  self-cal, rms=0.142024Jy  sigma=0.512763
wmodel /g0/scr/pima/npcsb_uvs/J0948+4039_X_map.mod
! Writing 106 model components to file: /g0/scr/pima/npcsb_uvs/J0948+4039_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0948+4039_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0948+4039_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0948+4039_X_map.win
! wwins: Wrote 5 windows to /g0/scr/pima/npcsb_uvs/J0948+4039_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00675551 Jy
! Component: 100  -  total flux cleaned = -0.00764847 Jy
! Component: 150  -  total flux cleaned = -0.00763051 Jy
! Component: 200  -  total flux cleaned = -0.00789018 Jy
! Component: 250  -  total flux cleaned = -0.00789516 Jy
! Component: 300  -  total flux cleaned = -0.00836718 Jy
! Component: 350  -  total flux cleaned = -0.00859224 Jy
! Component: 400  -  total flux cleaned = -0.00815789 Jy
! Component: 450  -  total flux cleaned = -0.00857712 Jy
! Component: 500  -  total flux cleaned = -0.00857656 Jy
! Component: 550  -  total flux cleaned = -0.00817681 Jy
! Component: 600  -  total flux cleaned = -0.0083754 Jy
! Component: 650  -  total flux cleaned = -0.00799384 Jy
! Component: 700  -  total flux cleaned = -0.00762446 Jy
! Component: 750  -  total flux cleaned = -0.00654041 Jy
! Component: 800  -  total flux cleaned = -0.00601336 Jy
! Component: 850  -  total flux cleaned = -0.00549042 Jy
! Component: 900  -  total flux cleaned = -0.00430808 Jy
! Component: 950  -  total flux cleaned = -0.00381414 Jy
! Component: 1000  -  total flux cleaned = -0.00316503 Jy
! Component: 1050  -  total flux cleaned = -0.0026873 Jy
! Component: 1100  -  total flux cleaned = -0.00174921 Jy
! Component: 1150  -  total flux cleaned = -0.00113541 Jy
! Component: 1200  -  total flux cleaned = 7.03907e-05 Jy
! Component: 1250  -  total flux cleaned = 0.000661546 Jy
! Component: 1300  -  total flux cleaned = 0.00153125 Jy
! Component: 1350  -  total flux cleaned = 0.0022461 Jy
! Component: 1400  -  total flux cleaned = 0.00252597 Jy
! Component: 1450  -  total flux cleaned = 0.00308286 Jy
! Component: 1500  -  total flux cleaned = 0.00362788 Jy
! Component: 1550  -  total flux cleaned = 0.00403016 Jy
! Component: 1600  -  total flux cleaned = 0.0041609 Jy
! Component: 1650  -  total flux cleaned = 0.00429177 Jy
! Component: 1700  -  total flux cleaned = 0.00480525 Jy
! Component: 1750  -  total flux cleaned = 0.00467798 Jy
! Component: 1800  -  total flux cleaned = 0.00505165 Jy
! Component: 1850  -  total flux cleaned = 0.00517358 Jy
! Component: 1900  -  total flux cleaned = 0.0055359 Jy
! Component: 1950  -  total flux cleaned = 0.00541635 Jy
! Component: 2000  -  total flux cleaned = 0.0057706 Jy
! Component: 2050  -  total flux cleaned = 0.00623458 Jy
! Component: 2100  -  total flux cleaned = 0.00634748 Jy
! Component: 2150  -  total flux cleaned = 0.00646143 Jy
! Component: 2200  -  total flux cleaned = 0.00679771 Jy
! Component: 2250  -  total flux cleaned = 0.00701985 Jy
! Component: 2300  -  total flux cleaned = 0.00734781 Jy
! Component: 2350  -  total flux cleaned = 0.00767131 Jy
! Component: 2400  -  total flux cleaned = 0.00809627 Jy
! Component: 2450  -  total flux cleaned = 0.00862104 Jy
! Component: 2500  -  total flux cleaned = 0.00893161 Jy
! Component: 2550  -  total flux cleaned = 0.00934283 Jy
! Component: 2600  -  total flux cleaned = 0.00974733 Jy
! Component: 2650  -  total flux cleaned = 0.00984684 Jy
! Component: 2700  -  total flux cleaned = 0.0101446 Jy
! Component: 2750  -  total flux cleaned = 0.0103421 Jy
! Component: 2800  -  total flux cleaned = 0.0108284 Jy
! Component: 2850  -  total flux cleaned = 0.0110203 Jy
! Component: 2900  -  total flux cleaned = 0.0110208 Jy
! Component: 2950  -  total flux cleaned = 0.0112105 Jy
! Component: 3000  -  total flux cleaned = 0.0113984 Jy
! Component: 3050  -  total flux cleaned = 0.0116768 Jy
! Component: 3100  -  total flux cleaned = 0.0115848 Jy
! Component: 3150  -  total flux cleaned = 0.0117669 Jy
! Component: 3200  -  total flux cleaned = 0.0115857 Jy
! Component: 3250  -  total flux cleaned = 0.0116756 Jy
! Component: 3300  -  total flux cleaned = 0.0113177 Jy
! Component: 3350  -  total flux cleaned = 0.010875 Jy
! Component: 3400  -  total flux cleaned = 0.0108761 Jy
! Component: 3450  -  total flux cleaned = 0.0107015 Jy
! Component: 3500  -  total flux cleaned = 0.0107019 Jy
! Component: 3550  -  total flux cleaned = 0.0103557 Jy
! Component: 3600  -  total flux cleaned = 0.0104416 Jy
! Component: 3650  -  total flux cleaned = 0.0103557 Jy
! Component: 3700  -  total flux cleaned = 0.0101853 Jy
! Component: 3750  -  total flux cleaned = 0.0100162 Jy
! Component: 3800  -  total flux cleaned = 0.00967917 Jy
! Component: 3850  -  total flux cleaned = 0.0095955 Jy
! Component: 3900  -  total flux cleaned = 0.00967946 Jy
! Component: 3950  -  total flux cleaned = 0.0097625 Jy
! Component: 4000  -  total flux cleaned = 0.00951329 Jy
! Component: 4050  -  total flux cleaned = 0.00951349 Jy
! Total flux subtracted in 4096 components = 0.00943126 Jy
! Clean residual min=-0.004335 max=0.004802 Jy/beam
! Clean residual mean=-0.000015 rms=0.001340 Jy/beam
! Combined flux in latest and established models = 1.26199 Jy
keep
! Adding 236 model components to the UV plane model.
! The established model now contains 339 components and 1.26199 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0948+4039_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9587 x 2.848 at 10.52 degrees (North through East)
! Clean map  min=-0.025123  max=0.57938 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0948+4039_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.579385 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0013254 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.686278 0.686278 1.37256 2.74511 5.49022 10.9804 21.9609 43.9218 87.8436
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0039 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.579 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0948+4039_X_uvs.log closed on Sat Oct  5 18:52:32 2013