! Started logfile: /g0/scr/pima/npcsb_uvs/J0932+7906_X_uvs.log on Sat Oct 5 18:52:23 2013 obs /g0/scr/pima/npcsb_uvs/J0932+7906_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0932+7906_X_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.396135 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0932+7906 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2624 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0932+7906_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 103 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003674Jy sigma=0.763909 ! Fit after self-cal, rms=0.947843Jy sigma=0.690413 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.213 mas, bmaj=3.18 mas, bpa=-6.337 degrees ! Estimated noise=48.2937 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0634853 Jy ! Component: 100 - total flux cleaned = 0.0717442 Jy ! Total flux subtracted in 100 components = 0.0717442 Jy ! Clean residual min=-0.010157 max=0.009900 Jy/beam ! Clean residual mean=0.000009 rms=0.002823 Jy/beam ! Combined flux in latest and established models = 0.0717441 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0717441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069610Jy sigma=0.053941 ! Fit after self-cal, rms=0.067600Jy sigma=0.052751 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.706 mas, bmaj=3.456 mas, bpa=0.08278 degrees ! Estimated noise=21.9903 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00228884 Jy ! Component: 100 - total flux cleaned = 0.00242112 Jy ! Component: 150 - total flux cleaned = 0.00242891 Jy ! Component: 200 - total flux cleaned = 0.0024298 Jy ! Total flux subtracted in 200 components = 0.0024298 Jy ! Clean residual min=-0.004921 max=0.005319 Jy/beam ! Clean residual mean=0.000005 rms=0.001506 Jy/beam ! Combined flux in latest and established models = 0.0741739 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 31 components and 0.0741739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068415Jy sigma=0.051688 ! Fit after self-cal, rms=0.068375Jy sigma=0.051663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.83 HN 0.76 KP 0.84 ! LA 1.01 MK 1.00* NL 1.00* OV 0.95 ! PT 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.89 HN 0.86 KP 0.83 ! LA 0.89 MK 1.00* NL 1.00* OV 0.89 ! PT 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.92 HN 0.90 KP 0.80 ! LA 0.85 MK 1.00* NL 1.00* OV 0.81 ! PT 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.79 HN 0.74 KP 0.72 ! LA 0.84 MK 1.00* NL 1.00* OV 0.91 ! PT 1.00 ! ! ! Fit before self-cal, rms=0.068375Jy sigma=0.051663 ! Fit after self-cal, rms=0.061156Jy sigma=0.048217 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.659 mas, bmaj=3.496 mas, bpa=0.3521 degrees ! Estimated noise=17.4214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0119867 Jy ! Component: 100 - total flux cleaned = -0.0146311 Jy ! Component: 150 - total flux cleaned = -0.0148398 Jy ! Component: 200 - total flux cleaned = -0.0148236 Jy ! Total flux subtracted in 200 components = -0.0148236 Jy ! Clean residual min=-0.002954 max=0.002403 Jy/beam ! Clean residual mean=-0.000013 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0593503 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.0593503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054376Jy sigma=0.050371 ! Fit after self-cal, rms=0.054401Jy sigma=0.050306 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054401Jy sigma=0.050306 ! Fit after self-cal, rms=0.049427Jy sigma=0.048113 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.674 mas, bmaj=3.51 mas, bpa=0.66 degrees ! Estimated noise=14.0697 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00965792 Jy ! Component: 100 - total flux cleaned = -0.0117807 Jy ! Component: 150 - total flux cleaned = -0.0119678 Jy ! Component: 200 - total flux cleaned = -0.0119723 Jy ! Total flux subtracted in 200 components = -0.0119723 Jy ! Clean residual min=-0.002366 max=0.001973 Jy/beam ! Clean residual mean=-0.000009 rms=0.000627 Jy/beam ! Combined flux in latest and established models = 0.047378 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.047378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043984Jy sigma=0.050261 ! Fit after self-cal, rms=0.043962Jy sigma=0.050242 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.64898e-05 Jy ! Component: 100 - total flux cleaned = -8.5467e-05 Jy ! Component: 150 - total flux cleaned = -7.30766e-05 Jy ! Component: 200 - total flux cleaned = -7.36345e-05 Jy ! Total flux subtracted in 200 components = -7.36345e-05 Jy ! Clean residual min=-0.002367 max=0.002021 Jy/beam ! Clean residual mean=-0.000009 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0473044 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 0.0473044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043911Jy sigma=0.050278 ! Fit after self-cal, rms=0.043916Jy sigma=0.050267 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043916Jy sigma=0.050267 ! Fit after self-cal, rms=0.039775Jy sigma=0.048041 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.692 mas, bmaj=3.521 mas, bpa=0.9458 degrees ! Estimated noise=11.328 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00777553 Jy ! Component: 100 - total flux cleaned = -0.00947741 Jy ! Component: 150 - total flux cleaned = -0.00949376 Jy ! Component: 200 - total flux cleaned = -0.00943441 Jy ! Total flux subtracted in 200 components = -0.00943441 Jy ! Clean residual min=-0.001886 max=0.001605 Jy/beam ! Clean residual mean=-0.000007 rms=0.000502 Jy/beam ! Combined flux in latest and established models = 0.03787 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 64 components and 0.03787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035382Jy sigma=0.050203 ! Fit after self-cal, rms=0.035383Jy sigma=0.050191 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.95096e-05 Jy ! Component: 100 - total flux cleaned = -0.000114485 Jy ! Component: 150 - total flux cleaned = -0.000115124 Jy ! Component: 200 - total flux cleaned = -0.000101089 Jy ! Total flux subtracted in 200 components = -0.000101089 Jy ! Clean residual min=-0.001910 max=0.001595 Jy/beam ! Clean residual mean=-0.000007 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0377689 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 67 components and 0.0377689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035347Jy sigma=0.050227 ! Fit after self-cal, rms=0.035345Jy sigma=0.050220 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035345Jy sigma=0.050220 ! Fit after self-cal, rms=0.032015Jy sigma=0.047990 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=5.156 mas, bpa=29.47 degrees ! Estimated noise=9.81743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00617527 Jy ! Component: 100 - total flux cleaned = -0.00752697 Jy ! Component: 150 - total flux cleaned = -0.00754798 Jy ! Component: 200 - total flux cleaned = -0.00747328 Jy ! Total flux subtracted in 200 components = -0.00747328 Jy ! Clean residual min=-0.001579 max=0.001417 Jy/beam ! Clean residual mean=-0.000008 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0302956 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 68 components and 0.0302956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028515Jy sigma=0.050101 ! Fit after self-cal, rms=0.028516Jy sigma=0.050083 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.24254e-05 Jy ! Component: 100 - total flux cleaned = 4.8675e-05 Jy ! Component: 150 - total flux cleaned = 5.96411e-05 Jy ! Component: 200 - total flux cleaned = 6.39149e-05 Jy ! Total flux subtracted in 200 components = 6.39149e-05 Jy ! Clean residual min=-0.001580 max=0.001369 Jy/beam ! Clean residual mean=-0.000007 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.0303595 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.0303595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028465Jy sigma=0.050159 ! Fit after self-cal, rms=0.028462Jy sigma=0.050149 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.71 mas, bmaj=3.53 mas, bpa=1.271 degrees ! Estimated noise=9.1177 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.71 x 3.53 at 1.271 degrees (North through East) ! Clean map min=-0.0019377 max=0.033863 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.208 mas, bmaj=3.225 mas, bpa=-5.04 degrees ! Estimated noise=20.0971 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.026638 Jy ! Component: 100 - total flux cleaned = 0.0286322 Jy ! Component: 150 - total flux cleaned = 0.0293895 Jy ! Component: 200 - total flux cleaned = 0.0295896 Jy ! Total flux subtracted in 200 components = 0.0295896 Jy ! Clean residual min=-0.002633 max=0.002761 Jy/beam ! Clean residual mean=-0.000005 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.0295896 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0295896 Jy ! Inverting map and beam ! Estimated beam: bmin=1.71 mas, bmaj=3.53 mas, bpa=1.271 degrees ! Estimated noise=9.1177 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000227763 Jy ! Component: 100 - total flux cleaned = 0.000301851 Jy ! Component: 150 - total flux cleaned = 0.000384892 Jy ! Component: 200 - total flux cleaned = 0.000426348 Jy ! Total flux subtracted in 200 components = 0.000426348 Jy ! Clean residual min=-0.001526 max=0.001434 Jy/beam ! Clean residual mean=-0.000006 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.030016 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 20 components and 0.030016 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.83 mas, bmaj=5.156 mas, bpa=29.47 degrees ! Estimated noise=9.81743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047353 Jy ! Component: 100 - total flux cleaned = 0.000546042 Jy ! Component: 150 - total flux cleaned = 0.000594022 Jy ! Component: 200 - total flux cleaned = 0.000634416 Jy ! Total flux subtracted in 200 components = 0.000634416 Jy ! Clean residual min=-0.001588 max=0.001332 Jy/beam ! Clean residual mean=-0.000007 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0306504 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.35161e-05 Jy ! Component: 100 - total flux cleaned = 5.50785e-05 Jy ! Component: 150 - total flux cleaned = 7.89363e-05 Jy ! Component: 200 - total flux cleaned = 8.93565e-05 Jy ! Total flux subtracted in 200 components = 8.93565e-05 Jy ! Clean residual min=-0.001592 max=0.001304 Jy/beam ! Clean residual mean=-0.000007 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0307397 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 36 components and 0.0307397 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.71 mas, bmaj=3.53 mas, bpa=1.271 degrees ! Estimated noise=9.1177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.50679e-05 Jy ! Component: 100 - total flux cleaned = -8.92099e-05 Jy ! Component: 150 - total flux cleaned = -0.000109353 Jy ! Component: 200 - total flux cleaned = -0.000117414 Jy ! Total flux subtracted in 200 components = -0.000117414 Jy ! Clean residual min=-0.001543 max=0.001427 Jy/beam ! Clean residual mean=-0.000005 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0306223 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 50 components and 0.0306223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.028401Jy sigma=0.050282 ! Fit after self-cal, rms=0.028397Jy sigma=0.050270 wmodel /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.mod ! Writing 50 model components to file: /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0932+7906_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0932+7906_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000433763 Jy ! Component: 100 - total flux cleaned = -0.000549318 Jy ! Component: 150 - total flux cleaned = -0.000509987 Jy ! Component: 200 - total flux cleaned = -0.000457736 Jy ! Component: 250 - total flux cleaned = -0.000425254 Jy ! Component: 300 - total flux cleaned = -0.000304018 Jy ! Component: 350 - total flux cleaned = -0.000173996 Jy ! Component: 400 - total flux cleaned = -9.6066e-06 Jy ! Component: 450 - total flux cleaned = 0.000134655 Jy ! Component: 500 - total flux cleaned = 0.000222894 Jy ! Component: 550 - total flux cleaned = 0.000320062 Jy ! Component: 600 - total flux cleaned = 0.000390427 Jy ! Component: 650 - total flux cleaned = 0.000435865 Jy ! Component: 700 - total flux cleaned = 0.0004693 Jy ! Component: 750 - total flux cleaned = 0.000512532 Jy ! Component: 800 - total flux cleaned = 0.000533564 Jy ! Component: 850 - total flux cleaned = 0.000564417 Jy ! Component: 900 - total flux cleaned = 0.000614848 Jy ! Component: 950 - total flux cleaned = 0.000684325 Jy ! Component: 1000 - total flux cleaned = 0.000762371 Jy ! Component: 1050 - total flux cleaned = 0.000839222 Jy ! Component: 1100 - total flux cleaned = 0.000896047 Jy ! Component: 1150 - total flux cleaned = 0.000970825 Jy ! Component: 1200 - total flux cleaned = 0.00106272 Jy ! Component: 1250 - total flux cleaned = 0.00114411 Jy ! Component: 1300 - total flux cleaned = 0.00122437 Jy ! Component: 1350 - total flux cleaned = 0.00128596 Jy ! Component: 1400 - total flux cleaned = 0.00134684 Jy ! Component: 1450 - total flux cleaned = 0.00141551 Jy ! Component: 1500 - total flux cleaned = 0.00146645 Jy ! Component: 1550 - total flux cleaned = 0.00153349 Jy ! Component: 1600 - total flux cleaned = 0.00157504 Jy ! Component: 1650 - total flux cleaned = 0.00160793 Jy ! Component: 1700 - total flux cleaned = 0.00165699 Jy ! Component: 1750 - total flux cleaned = 0.00169762 Jy ! Component: 1800 - total flux cleaned = 0.00174612 Jy ! Component: 1850 - total flux cleaned = 0.00179443 Jy ! Component: 1900 - total flux cleaned = 0.00184255 Jy ! Component: 1950 - total flux cleaned = 0.00189853 Jy ! Component: 2000 - total flux cleaned = 0.00193845 Jy ! Component: 2050 - total flux cleaned = 0.00197038 Jy ! Component: 2100 - total flux cleaned = 0.00200221 Jy ! Component: 2150 - total flux cleaned = 0.00203417 Jy ! Component: 2200 - total flux cleaned = 0.00206619 Jy ! Component: 2250 - total flux cleaned = 0.00209032 Jy ! Component: 2300 - total flux cleaned = 0.00212259 Jy ! Component: 2350 - total flux cleaned = 0.00213871 Jy ! Component: 2400 - total flux cleaned = 0.00215509 Jy ! Component: 2450 - total flux cleaned = 0.00216322 Jy ! Component: 2500 - total flux cleaned = 0.00217153 Jy ! Component: 2550 - total flux cleaned = 0.00219661 Jy ! Component: 2600 - total flux cleaned = 0.00221345 Jy ! Component: 2650 - total flux cleaned = 0.00222199 Jy ! Component: 2700 - total flux cleaned = 0.0022305 Jy ! Component: 2750 - total flux cleaned = 0.00223911 Jy ! Component: 2800 - total flux cleaned = 0.00223901 Jy ! Component: 2850 - total flux cleaned = 0.00223012 Jy ! Component: 2900 - total flux cleaned = 0.00222115 Jy ! Component: 2950 - total flux cleaned = 0.00222109 Jy ! Component: 3000 - total flux cleaned = 0.00221196 Jy ! Component: 3050 - total flux cleaned = 0.00220265 Jy ! Component: 3100 - total flux cleaned = 0.00220262 Jy ! Component: 3150 - total flux cleaned = 0.00220272 Jy ! Component: 3200 - total flux cleaned = 0.00221246 Jy ! Component: 3250 - total flux cleaned = 0.00221254 Jy ! Component: 3300 - total flux cleaned = 0.0022125 Jy ! Component: 3350 - total flux cleaned = 0.00221249 Jy ! Component: 3400 - total flux cleaned = 0.00222295 Jy ! Component: 3450 - total flux cleaned = 0.00223355 Jy ! Component: 3500 - total flux cleaned = 0.0022443 Jy ! Component: 3550 - total flux cleaned = 0.00225542 Jy ! Component: 3600 - total flux cleaned = 0.00225541 Jy ! Component: 3650 - total flux cleaned = 0.00225533 Jy ! Component: 3700 - total flux cleaned = 0.00226713 Jy ! Component: 3750 - total flux cleaned = 0.00227924 Jy ! Component: 3800 - total flux cleaned = 0.00227923 Jy ! Component: 3850 - total flux cleaned = 0.00229189 Jy ! Component: 3900 - total flux cleaned = 0.00229198 Jy ! Component: 3950 - total flux cleaned = 0.00229206 Jy ! Component: 4000 - total flux cleaned = 0.00230533 Jy ! Component: 4050 - total flux cleaned = 0.00230517 Jy ! Total flux subtracted in 4096 components = 0.00231897 Jy ! Clean residual min=-0.000822 max=0.000846 Jy/beam ! Clean residual mean=-0.000001 rms=0.000201 Jy/beam ! Combined flux in latest and established models = 0.0329413 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 297 components and 0.0329413 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0932+7906_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.71 x 3.53 at 1.271 degrees (North through East) ! Clean map min=-0.0013651 max=0.033362 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0932+7906_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0333619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000161873 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.45561 1.45561 2.91122 5.82244 11.6449 23.2897 46.5795 93.159 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.033 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0932+7906_X_uvs.log closed on Sat Oct 5 18:52:27 2013