! Started logfile: /g0/scr/pima/npcsb_uvs/J0909+8327_S_uvs.log on Sat Oct  5 18:58:00 2013
obs /g0/scr/pima/npcsb_uvs/J0909+8327_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0909+8327_S_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.8 visibilities/baseline/integration-bin.
! Found source: J0909+8327
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6480 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0909+8327_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.016397Jy  sigma=1.165090
! Fit after  self-cal, rms=0.896258Jy  sigma=0.945536
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.194 mas, bmaj=10.27 mas, bpa=11.94 degrees
! Estimated noise=22.2079 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0918304 Jy
! Component: 100  -  total flux cleaned = 0.122235 Jy
! Total flux subtracted in 100 components = 0.122235 Jy
! Clean residual min=-0.011065 max=0.014432 Jy/beam
! Clean residual mean=-0.000029 rms=0.003419 Jy/beam
! Combined flux in latest and established models = 0.122235 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.122235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102025Jy  sigma=0.131578
! Fit after  self-cal, rms=0.101310Jy  sigma=0.131072
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.496 mas, bmaj=10.92 mas, bpa=11.17 degrees
! Estimated noise=8.66803 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0334148 Jy
! Component: 100  -  total flux cleaned = 0.0514493 Jy
! Component: 150  -  total flux cleaned = 0.0624452 Jy
! Component: 200  -  total flux cleaned = 0.0693105 Jy
! Total flux subtracted in 200 components = 0.0693105 Jy
! Clean residual min=-0.009481 max=0.012841 Jy/beam
! Clean residual mean=-0.000030 rms=0.002821 Jy/beam
! Combined flux in latest and established models = 0.191545 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 62 components and 0.191545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099134Jy  sigma=0.109561
! Fit after  self-cal, rms=0.098923Jy  sigma=0.109356
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        0.92     HN        0.78     KP        0.90     
!   LA        0.98     MK        0.69     NL        1.13     OV        1.03     
!   PT        1.00     SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.84     KP        0.89     
!   LA        0.96     MK        0.81     NL        1.22     OV        1.04     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.99     HN        0.86     KP        0.93     
!   LA        0.74     MK        0.85     NL        1.22     OV        1.02     
!   PT        1.10     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.94     HN        0.87     KP        0.84     
!   LA        0.67     MK        0.93     NL        1.13     OV        0.88     
!   PT        0.92     SC        0.84     
! 
! 
! Fit before self-cal, rms=0.098923Jy  sigma=0.109356
! Fit after  self-cal, rms=0.088017Jy  sigma=0.099685
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.365 mas, bmaj=10.71 mas, bpa=11.41 degrees
! Estimated noise=7.4198 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0137436 Jy
! Component: 100  -  total flux cleaned = -0.0147325 Jy
! Component: 150  -  total flux cleaned = -0.0143258 Jy
! Component: 200  -  total flux cleaned = -0.013986 Jy
! Total flux subtracted in 200 components = -0.013986 Jy
! Clean residual min=-0.003531 max=0.004220 Jy/beam
! Clean residual mean=-0.000019 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.177559 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 69 components and 0.177559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081687Jy  sigma=0.101934
! Fit after  self-cal, rms=0.081816Jy  sigma=0.101660
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081816Jy  sigma=0.101660
! Fit after  self-cal, rms=0.076196Jy  sigma=0.099209
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.224 mas, bmaj=10.61 mas, bpa=11.7 degrees
! Estimated noise=6.47383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.011704 Jy
! Component: 100  -  total flux cleaned = -0.0138241 Jy
! Component: 150  -  total flux cleaned = -0.013675 Jy
! Component: 200  -  total flux cleaned = -0.0135432 Jy
! Total flux subtracted in 200 components = -0.0135432 Jy
! Clean residual min=-0.003311 max=0.003588 Jy/beam
! Clean residual mean=-0.000015 rms=0.000891 Jy/beam
! Combined flux in latest and established models = 0.164016 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 76 components and 0.164016 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071022Jy  sigma=0.101452
! Fit after  self-cal, rms=0.070962Jy  sigma=0.101367
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277769 Jy
! Component: 100  -  total flux cleaned = 0.00251415 Jy
! Component: 150  -  total flux cleaned = 0.00237535 Jy
! Component: 200  -  total flux cleaned = 0.00243524 Jy
! Total flux subtracted in 200 components = 0.00243524 Jy
! Clean residual min=-0.003155 max=0.003615 Jy/beam
! Clean residual mean=-0.000012 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.166451 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 107 components and 0.166451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070470Jy  sigma=0.101136
! Fit after  self-cal, rms=0.070377Jy  sigma=0.101022
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070377Jy  sigma=0.101022
! Fit after  self-cal, rms=0.065609Jy  sigma=0.098721
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.082 mas, bmaj=10.55 mas, bpa=11.8 degrees
! Estimated noise=5.6566 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00975084 Jy
! Component: 100  -  total flux cleaned = -0.010511 Jy
! Component: 150  -  total flux cleaned = -0.0108768 Jy
! Component: 200  -  total flux cleaned = -0.0109361 Jy
! Total flux subtracted in 200 components = -0.0109361 Jy
! Clean residual min=-0.002600 max=0.003052 Jy/beam
! Clean residual mean=-0.000009 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.155515 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 120 components and 0.155515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061409Jy  sigma=0.100635
! Fit after  self-cal, rms=0.061291Jy  sigma=0.100506
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.5, -31.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208608 Jy
! Component: 100  -  total flux cleaned = 0.00273149 Jy
! Component: 150  -  total flux cleaned = 0.00298994 Jy
! Component: 200  -  total flux cleaned = 0.00331527 Jy
! Total flux subtracted in 200 components = 0.00331527 Jy
! Clean residual min=-0.002511 max=0.002057 Jy/beam
! Clean residual mean=-0.000003 rms=0.000587 Jy/beam
! Combined flux in latest and established models = 0.15883 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 137 components and 0.15883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060896Jy  sigma=0.100358
! Fit after  self-cal, rms=0.060838Jy  sigma=0.100295
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060838Jy  sigma=0.100295
! Fit after  self-cal, rms=0.057063Jy  sigma=0.098187
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.788 mas, bmaj=12.74 mas, bpa=7.943 degrees
! Estimated noise=5.86383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00859829 Jy
! Component: 100  -  total flux cleaned = -0.00961288 Jy
! Component: 150  -  total flux cleaned = -0.00932391 Jy
! Component: 200  -  total flux cleaned = -0.00909404 Jy
! Total flux subtracted in 200 components = -0.00909404 Jy
! Clean residual min=-0.002551 max=0.002235 Jy/beam
! Clean residual mean=-0.000002 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.149736 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 166 components and 0.149736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053674Jy  sigma=0.100082
! Fit after  self-cal, rms=0.053618Jy  sigma=0.099975
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.57829e-05 Jy
! Component: 100  -  total flux cleaned = 0.000136359 Jy
! Component: 150  -  total flux cleaned = 0.000203718 Jy
! Component: 200  -  total flux cleaned = 0.000291682 Jy
! Total flux subtracted in 200 components = 0.000291682 Jy
! Clean residual min=-0.002216 max=0.002116 Jy/beam
! Clean residual mean=-0.000002 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.150028 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 187 components and 0.150028 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053487Jy  sigma=0.100065
! Fit after  self-cal, rms=0.053481Jy  sigma=0.100040
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.958 mas, bmaj=10.52 mas, bpa=11.85 degrees
! Estimated noise=4.97309 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.958 x 10.52 at 11.85 degrees (North through East)
! Clean map  min=-0.0020712  max=0.063473 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.937 mas, bmaj=10.28 mas, bpa=12.06 degrees
! Estimated noise=10.7908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0462616 Jy
! Component: 100  -  total flux cleaned = 0.0693213 Jy
! Component: 150  -  total flux cleaned = 0.0837103 Jy
! Component: 200  -  total flux cleaned = 0.0936873 Jy
! Total flux subtracted in 200 components = 0.0936873 Jy
! Clean residual min=-0.004599 max=0.006237 Jy/beam
! Clean residual mean=-0.000013 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 0.0936873 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 44 model components to the UV plane model.
! The established model now contains 44 components and 0.0936873 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.958 mas, bmaj=10.52 mas, bpa=11.85 degrees
! Estimated noise=4.97309 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0168404 Jy
! Component: 100  -  total flux cleaned = 0.0272448 Jy
! Component: 150  -  total flux cleaned = 0.0341548 Jy
! Component: 200  -  total flux cleaned = 0.0390412 Jy
! Total flux subtracted in 200 components = 0.0390412 Jy
! Clean residual min=-0.002960 max=0.003429 Jy/beam
! Clean residual mean=-0.000024 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.132728 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 123 components and 0.132728 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.788 mas, bmaj=12.74 mas, bpa=7.943 degrees
! Estimated noise=5.86383 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00560524 Jy
! Component: 100  -  total flux cleaned = 0.0091219 Jy
! Component: 150  -  total flux cleaned = 0.0116228 Jy
! Component: 200  -  total flux cleaned = 0.0134708 Jy
! Total flux subtracted in 200 components = 0.0134708 Jy
! Clean residual min=-0.002759 max=0.001898 Jy/beam
! Clean residual mean=-0.000011 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.146199 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0013937 Jy
! Component: 100  -  total flux cleaned = 0.00246015 Jy
! Component: 150  -  total flux cleaned = 0.00313184 Jy
! Component: 200  -  total flux cleaned = 0.00333168 Jy
! Total flux subtracted in 200 components = 0.00333168 Jy
! Clean residual min=-0.002292 max=0.002025 Jy/beam
! Clean residual mean=-0.000002 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.149531 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 226 components and 0.149531 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.958 mas, bmaj=10.52 mas, bpa=11.85 degrees
! Estimated noise=4.97309 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000734717 Jy
! Component: 100  -  total flux cleaned = 0.00115912 Jy
! Component: 150  -  total flux cleaned = 0.00126774 Jy
! Component: 200  -  total flux cleaned = 0.0012353 Jy
! Total flux subtracted in 200 components = 0.0012353 Jy
! Clean residual min=-0.001945 max=0.001729 Jy/beam
! Clean residual mean=0.000001 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.150766 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 249 components and 0.150766 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053310Jy  sigma=0.100033
! Fit after  self-cal, rms=0.053269Jy  sigma=0.099968
wmodel /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.mod
! Writing 249 model components to file: /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0909+8327_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0909+8327_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000694751 Jy
! Component: 100  -  total flux cleaned = -0.00112827 Jy
! Component: 150  -  total flux cleaned = -0.0013893 Jy
! Component: 200  -  total flux cleaned = -0.00158084 Jy
! Component: 250  -  total flux cleaned = -0.00178905 Jy
! Component: 300  -  total flux cleaned = -0.0019387 Jy
! Component: 350  -  total flux cleaned = -0.00208194 Jy
! Component: 400  -  total flux cleaned = -0.00222116 Jy
! Component: 450  -  total flux cleaned = -0.00237863 Jy
! Component: 500  -  total flux cleaned = -0.00253189 Jy
! Component: 550  -  total flux cleaned = -0.00270167 Jy
! Component: 600  -  total flux cleaned = -0.0028257 Jy
! Component: 650  -  total flux cleaned = -0.00286619 Jy
! Component: 700  -  total flux cleaned = -0.00302599 Jy
! Component: 750  -  total flux cleaned = -0.00314314 Jy
! Component: 800  -  total flux cleaned = -0.00323916 Jy
! Component: 850  -  total flux cleaned = -0.00337211 Jy
! Component: 900  -  total flux cleaned = -0.00350258 Jy
! Component: 950  -  total flux cleaned = -0.00357651 Jy
! Component: 1000  -  total flux cleaned = -0.00375777 Jy
! Component: 1050  -  total flux cleaned = -0.00386494 Jy
! Component: 1100  -  total flux cleaned = -0.00395302 Jy
! Component: 1150  -  total flux cleaned = -0.00400533 Jy
! Component: 1200  -  total flux cleaned = -0.00407423 Jy
! Component: 1250  -  total flux cleaned = -0.00412531 Jy
! Component: 1300  -  total flux cleaned = -0.00417563 Jy
! Component: 1350  -  total flux cleaned = -0.00427482 Jy
! Component: 1400  -  total flux cleaned = -0.00425857 Jy
! Component: 1450  -  total flux cleaned = -0.00437194 Jy
! Component: 1500  -  total flux cleaned = -0.00441997 Jy
! Component: 1550  -  total flux cleaned = -0.00445147 Jy
! Component: 1600  -  total flux cleaned = -0.00449827 Jy
! Component: 1650  -  total flux cleaned = -0.00451361 Jy
! Component: 1700  -  total flux cleaned = -0.00457502 Jy
! Component: 1750  -  total flux cleaned = -0.00456002 Jy
! Component: 1800  -  total flux cleaned = -0.00465043 Jy
! Component: 1850  -  total flux cleaned = -0.0046802 Jy
! Component: 1900  -  total flux cleaned = -0.00475394 Jy
! Component: 1950  -  total flux cleaned = -0.00475406 Jy
! Component: 2000  -  total flux cleaned = -0.00479756 Jy
! Component: 2050  -  total flux cleaned = -0.00482628 Jy
! Component: 2100  -  total flux cleaned = -0.00485483 Jy
! Component: 2150  -  total flux cleaned = -0.00491128 Jy
! Component: 2200  -  total flux cleaned = -0.0049671 Jy
! Component: 2250  -  total flux cleaned = -0.00498091 Jy
! Component: 2300  -  total flux cleaned = -0.00502237 Jy
! Component: 2350  -  total flux cleaned = -0.00504956 Jy
! Component: 2400  -  total flux cleaned = -0.00509007 Jy
! Component: 2450  -  total flux cleaned = -0.00510346 Jy
! Component: 2500  -  total flux cleaned = -0.00517025 Jy
! Component: 2550  -  total flux cleaned = -0.00518339 Jy
! Component: 2600  -  total flux cleaned = -0.00523595 Jy
! Component: 2650  -  total flux cleaned = -0.00527507 Jy
! Component: 2700  -  total flux cleaned = -0.00532682 Jy
! Component: 2750  -  total flux cleaned = -0.00533963 Jy
! Component: 2800  -  total flux cleaned = -0.0054289 Jy
! Component: 2850  -  total flux cleaned = -0.00546704 Jy
! Component: 2900  -  total flux cleaned = -0.00552999 Jy
! Component: 2950  -  total flux cleaned = -0.00558017 Jy
! Component: 3000  -  total flux cleaned = -0.00566716 Jy
! Component: 3050  -  total flux cleaned = -0.00574118 Jy
! Component: 3100  -  total flux cleaned = -0.00577792 Jy
! Component: 3150  -  total flux cleaned = -0.00585095 Jy
! Component: 3200  -  total flux cleaned = -0.00594781 Jy
! Component: 3250  -  total flux cleaned = -0.00603214 Jy
! Component: 3300  -  total flux cleaned = -0.00603222 Jy
! Component: 3350  -  total flux cleaned = -0.00613939 Jy
! Component: 3400  -  total flux cleaned = -0.00625778 Jy
! Component: 3450  -  total flux cleaned = -0.00634012 Jy
! Component: 3500  -  total flux cleaned = -0.00641036 Jy
! Component: 3550  -  total flux cleaned = -0.00651497 Jy
! Component: 3600  -  total flux cleaned = -0.00656125 Jy
! Component: 3650  -  total flux cleaned = -0.00665312 Jy
! Component: 3700  -  total flux cleaned = -0.00671034 Jy
! Component: 3750  -  total flux cleaned = -0.00681269 Jy
! Component: 3800  -  total flux cleaned = -0.0069144 Jy
! Component: 3850  -  total flux cleaned = -0.00694802 Jy
! Component: 3900  -  total flux cleaned = -0.00699287 Jy
! Component: 3950  -  total flux cleaned = -0.00704851 Jy
! Component: 4000  -  total flux cleaned = -0.00715914 Jy
! Component: 4050  -  total flux cleaned = -0.00720318 Jy
! Total flux subtracted in 4096 components = -0.00722502 Jy
! Clean residual min=-0.000834 max=0.000798 Jy/beam
! Clean residual mean=-0.000003 rms=0.000204 Jy/beam
! Combined flux in latest and established models = 0.143541 Jy
keep
! Adding 276 model components to the UV plane model.
! The established model now contains 525 components and 0.143541 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0909+8327_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.958 x 10.52 at 11.85 degrees (North through East)
! Clean map  min=-0.0013597  max=0.063028 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0909+8327_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0630276 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000204221 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.972055 0.972055 1.94411 3.88822 7.77644 15.5529 31.1058 62.2115
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.063 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0909+8327_S_uvs.log closed on Sat Oct  5 18:58:04 2013