! Started logfile: /g0/scr/pima/npcsb_uvs/J0858+7501_S_uvs.log on Sat Oct  5 18:57:45 2013
obs /g0/scr/pima/npcsb_uvs/J0858+7501_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0858+7501_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.461939 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0858+7501
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3908 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0858+7501_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.024409Jy  sigma=1.387604
! Fit after  self-cal, rms=0.907635Jy  sigma=1.026712
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.009 mas, bmaj=10.26 mas, bpa=8.91 degrees
! Estimated noise=21.3175 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0913246 Jy
! Component: 100  -  total flux cleaned = 0.0910076 Jy
! Total flux subtracted in 100 components = 0.0910076 Jy
! Clean residual min=-0.026500 max=0.026550 Jy/beam
! Clean residual mean=-0.000688 rms=0.011486 Jy/beam
! Combined flux in latest and established models = 0.0910076 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.0910076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121354Jy  sigma=0.206871
! Fit after  self-cal, rms=0.119286Jy  sigma=0.204999
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.528 mas, bmaj=11 mas, bpa=7.857 degrees
! Estimated noise=10.4331 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019388 Jy
! Component: 100  -  total flux cleaned = 0.0104502 Jy
! Component: 150  -  total flux cleaned = 0.00359985 Jy
! Component: 200  -  total flux cleaned = -0.00854711 Jy
! Total flux subtracted in 200 components = -0.00854711 Jy
! Clean residual min=-0.014449 max=0.014412 Jy/beam
! Clean residual mean=-0.000321 rms=0.006622 Jy/beam
! Combined flux in latest and established models = 0.0824605 Jy
! Performing phase self-cal
! Adding 131 model components to the UV plane model.
! The established model now contains 172 components and 0.0824605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105022Jy  sigma=0.140769
! Fit after  self-cal, rms=0.102452Jy  sigma=0.137828
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.88     HN        0.88     KP        0.84     
!   LA        1.15     MK        0.86     NL        1.09     OV        0.86     
!   PT        0.91     SC        0.79     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        1.07     HN        0.95     KP        0.92     
!   LA        1.02     MK        0.82     NL        1.15     OV        1.11     
!   PT        0.82     SC        0.78     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.95     KP        1.03     
!   LA        0.77     MK        0.98     NL        1.05     OV        1.02     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.85     HN        0.79     KP        0.83     
!   LA        0.70     MK        0.91     NL        0.97     OV        0.78     
!   PT        1.00     SC        1.20     
! 
! 
! Fit before self-cal, rms=0.102452Jy  sigma=0.137828
! Fit after  self-cal, rms=0.090429Jy  sigma=0.111675
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.521 mas, bmaj=10.99 mas, bpa=7.91 degrees
! Estimated noise=8.79572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00955629 Jy
! Component: 100  -  total flux cleaned = -0.0137985 Jy
! Component: 150  -  total flux cleaned = -0.0149671 Jy
! Component: 200  -  total flux cleaned = -0.0140172 Jy
! Total flux subtracted in 200 components = -0.0140172 Jy
! Clean residual min=-0.003718 max=0.003733 Jy/beam
! Clean residual mean=0.000004 rms=0.001322 Jy/beam
! Combined flux in latest and established models = 0.0684433 Jy
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 235 components and 0.0684433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083067Jy  sigma=0.109086
! Fit after  self-cal, rms=0.082073Jy  sigma=0.107295
! Inverting map 
! Added new window around map position (36, 105).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00747519 Jy
! Component: 100  -  total flux cleaned = 0.00879421 Jy
! Component: 150  -  total flux cleaned = 0.0100115 Jy
! Component: 200  -  total flux cleaned = 0.0109567 Jy
! Total flux subtracted in 200 components = 0.0109567 Jy
! Clean residual min=-0.005708 max=0.004926 Jy/beam
! Clean residual mean=-0.000020 rms=0.001562 Jy/beam
! Combined flux in latest and established models = 0.0794 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 272 components and 0.0794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081489Jy  sigma=0.105832
! Fit after  self-cal, rms=0.081024Jy  sigma=0.105193
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081024Jy  sigma=0.105193
! Fit after  self-cal, rms=0.075923Jy  sigma=0.103577
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.39 mas, bmaj=10.91 mas, bpa=7.937 degrees
! Estimated noise=7.98864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362877 Jy
! Component: 100  -  total flux cleaned = 0.00476877 Jy
! Component: 150  -  total flux cleaned = 0.00572805 Jy
! Component: 200  -  total flux cleaned = 0.00656865 Jy
! Total flux subtracted in 200 components = 0.00656865 Jy
! Clean residual min=-0.013529 max=0.007015 Jy/beam
! Clean residual mean=0.000007 rms=0.002256 Jy/beam
! Combined flux in latest and established models = 0.0859687 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 291 components and 0.0859687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075484Jy  sigma=0.103218
! Fit after  self-cal, rms=0.075297Jy  sigma=0.103067
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00188228 Jy
! Component: 100  -  total flux cleaned = 0.00285651 Jy
! Component: 150  -  total flux cleaned = 0.00363582 Jy
! Component: 200  -  total flux cleaned = 0.00439125 Jy
! Total flux subtracted in 200 components = 0.00439125 Jy
! Clean residual min=-0.013147 max=0.007090 Jy/beam
! Clean residual mean=0.000002 rms=0.002230 Jy/beam
! Combined flux in latest and established models = 0.0903599 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 300 components and 0.0903599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075050Jy  sigma=0.102894
! Fit after  self-cal, rms=0.074944Jy  sigma=0.102828
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074944Jy  sigma=0.102828
! Fit after  self-cal, rms=0.074492Jy  sigma=0.102599
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=5.389 mas, bmaj=10.92 mas, bpa=7.824 degrees
! Estimated noise=7.93807 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243904 Jy
! Component: 100  -  total flux cleaned = 0.0031788 Jy
! Component: 150  -  total flux cleaned = 0.00380961 Jy
! Component: 200  -  total flux cleaned = 0.00442967 Jy
! Total flux subtracted in 200 components = 0.00442967 Jy
! Clean residual min=-0.012650 max=0.006796 Jy/beam
! Clean residual mean=0.000007 rms=0.002041 Jy/beam
! Combined flux in latest and established models = 0.0947896 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 305 components and 0.0947896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074276Jy  sigma=0.102416
! Fit after  self-cal, rms=0.074207Jy  sigma=0.102347
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117042 Jy
! Component: 100  -  total flux cleaned = 0.00180452 Jy
! Component: 150  -  total flux cleaned = 0.0023605 Jy
! Component: 200  -  total flux cleaned = 0.00261283 Jy
! Total flux subtracted in 200 components = 0.00261283 Jy
! Clean residual min=-0.012389 max=0.006905 Jy/beam
! Clean residual mean=0.000003 rms=0.002030 Jy/beam
! Combined flux in latest and established models = 0.0974024 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 307 components and 0.0974024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074081Jy  sigma=0.102268
! Fit after  self-cal, rms=0.074035Jy  sigma=0.102244
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074035Jy  sigma=0.102244
! Fit after  self-cal, rms=0.073599Jy  sigma=0.102057
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.216 mas, bmaj=12.02 mas, bpa=9.292 degrees
! Estimated noise=7.64158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225907 Jy
! Component: 100  -  total flux cleaned = 0.00265118 Jy
! Component: 150  -  total flux cleaned = 0.00280609 Jy
! Component: 200  -  total flux cleaned = 0.00295169 Jy
! Total flux subtracted in 200 components = 0.00295169 Jy
! Clean residual min=-0.011883 max=0.007470 Jy/beam
! Clean residual mean=0.000020 rms=0.002423 Jy/beam
! Combined flux in latest and established models = 0.100354 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 314 components and 0.100354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073496Jy  sigma=0.101981
! Fit after  self-cal, rms=0.073460Jy  sigma=0.101943
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125489 Jy
! Component: 100  -  total flux cleaned = 0.00150361 Jy
! Component: 150  -  total flux cleaned = 0.00168776 Jy
! Component: 200  -  total flux cleaned = 0.00177396 Jy
! Total flux subtracted in 200 components = 0.00177396 Jy
! Clean residual min=-0.011700 max=0.007581 Jy/beam
! Clean residual mean=0.000020 rms=0.002414 Jy/beam
! Combined flux in latest and established models = 0.102128 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 323 components and 0.102128 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073383Jy  sigma=0.101909
! Fit after  self-cal, rms=0.073348Jy  sigma=0.101893
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=5.382 mas, bmaj=10.91 mas, bpa=7.764 degrees
! Estimated noise=7.86281 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.382 x 10.91 at 7.764 degrees (North through East)
! Clean map  min=-0.012396  max=0.083118 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.934 mas, bmaj=10.28 mas, bpa=9.142 degrees
! Estimated noise=15.6888 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00750186 Jy
! Component: 100  -  total flux cleaned = -0.0122117 Jy
! Component: 150  -  total flux cleaned = -0.0135051 Jy
! Component: 200  -  total flux cleaned = -0.0135331 Jy
! Total flux subtracted in 200 components = -0.0135331 Jy
! Clean residual min=-0.049953 max=0.079080 Jy/beam
! Clean residual mean=-0.000774 rms=0.015510 Jy/beam
! Combined flux in latest and established models = -0.0135331 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and -0.0135331 Jy
! Inverting map and beam 
! Estimated beam: bmin=5.382 mas, bmaj=10.91 mas, bpa=7.764 degrees
! Estimated noise=7.86281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.028529 Jy
! Component: 100  -  total flux cleaned = 0.0441094 Jy
! Component: 150  -  total flux cleaned = 0.0512293 Jy
! Component: 200  -  total flux cleaned = 0.0531742 Jy
! Total flux subtracted in 200 components = 0.0531742 Jy
! Clean residual min=-0.075867 max=0.110070 Jy/beam
! Clean residual mean=-0.001087 rms=0.027067 Jy/beam
! Combined flux in latest and established models = 0.0396412 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 77 components and 0.0396412 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.216 mas, bmaj=12.02 mas, bpa=9.292 degrees
! Estimated noise=7.64158 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000858604 Jy
! Component: 100  -  total flux cleaned = -0.00138296 Jy
! Component: 150  -  total flux cleaned = -0.00185698 Jy
! Component: 200  -  total flux cleaned = -0.00228192 Jy
! Total flux subtracted in 200 components = -0.00228192 Jy
! Clean residual min=-0.110588 max=0.138835 Jy/beam
! Clean residual mean=-0.001670 rms=0.039757 Jy/beam
! Combined flux in latest and established models = 0.0373592 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.52734e-06 Jy
! Component: 100  -  total flux cleaned = -0.000363438 Jy
! Component: 150  -  total flux cleaned = -0.000532846 Jy
! Component: 200  -  total flux cleaned = -0.000858825 Jy
! Total flux subtracted in 200 components = -0.000858825 Jy
! Clean residual min=-0.110870 max=0.138089 Jy/beam
! Clean residual mean=-0.001664 rms=0.039668 Jy/beam
! Combined flux in latest and established models = 0.0365004 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 109 components and 0.0365004 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=5.382 mas, bmaj=10.91 mas, bpa=7.764 degrees
! Estimated noise=7.86281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189009 Jy
! Component: 100  -  total flux cleaned = 0.00247848 Jy
! Component: 150  -  total flux cleaned = 0.0027428 Jy
! Component: 200  -  total flux cleaned = 0.00286881 Jy
! Total flux subtracted in 200 components = 0.00286881 Jy
! Clean residual min=-0.076432 max=0.108251 Jy/beam
! Clean residual mean=-0.001096 rms=0.026754 Jy/beam
! Combined flux in latest and established models = 0.0393692 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 129 components and 0.0393692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119410Jy  sigma=0.318360
! Fit after  self-cal, rms=0.102028Jy  sigma=0.261982
wmodel /g0/scr/pima/npcsb_uvs/J0858+7501_S_map.mod
! Writing 129 model components to file: /g0/scr/pima/npcsb_uvs/J0858+7501_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0858+7501_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0858+7501_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0858+7501_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0858+7501_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0210231 Jy
! Component: 100  -  total flux cleaned = 0.0301753 Jy
! Component: 150  -  total flux cleaned = 0.0336978 Jy
! Component: 200  -  total flux cleaned = 0.0331693 Jy
! Component: 250  -  total flux cleaned = 0.0330927 Jy
! Component: 300  -  total flux cleaned = 0.0351611 Jy
! Component: 350  -  total flux cleaned = 0.0395891 Jy
! Component: 400  -  total flux cleaned = 0.0415305 Jy
! Component: 450  -  total flux cleaned = 0.0415305 Jy
! Component: 500  -  total flux cleaned = 0.0406858 Jy
! Component: 550  -  total flux cleaned = 0.0404083 Jy
! Component: 600  -  total flux cleaned = 0.0409372 Jy
! Component: 650  -  total flux cleaned = 0.0414481 Jy
! Component: 700  -  total flux cleaned = 0.0419521 Jy
! Component: 750  -  total flux cleaned = 0.0426936 Jy
! Component: 800  -  total flux cleaned = 0.0431804 Jy
! Component: 850  -  total flux cleaned = 0.0443781 Jy
! Component: 900  -  total flux cleaned = 0.0453255 Jy
! Component: 950  -  total flux cleaned = 0.0453257 Jy
! Component: 1000  -  total flux cleaned = 0.0455612 Jy
! Component: 1050  -  total flux cleaned = 0.0457936 Jy
! Component: 1100  -  total flux cleaned = 0.045794 Jy
! Component: 1150  -  total flux cleaned = 0.0450971 Jy
! Component: 1200  -  total flux cleaned = 0.0443967 Jy
! Component: 1250  -  total flux cleaned = 0.0429932 Jy
! Component: 1300  -  total flux cleaned = 0.0408719 Jy
! Component: 1350  -  total flux cleaned = 0.0392098 Jy
! Component: 1400  -  total flux cleaned = 0.0375367 Jy
! Component: 1450  -  total flux cleaned = 0.036813 Jy
! Component: 1500  -  total flux cleaned = 0.0355997 Jy
! Component: 1550  -  total flux cleaned = 0.0331503 Jy
! Component: 1600  -  total flux cleaned = 0.0309188 Jy
! Component: 1650  -  total flux cleaned = 0.0286674 Jy
! Component: 1700  -  total flux cleaned = 0.0261386 Jy
! Component: 1750  -  total flux cleaned = 0.0233297 Jy
! Component: 1800  -  total flux cleaned = 0.021008 Jy
! Component: 1850  -  total flux cleaned = 0.0181421 Jy
! Component: 1900  -  total flux cleaned = 0.0152453 Jy
! Component: 1950  -  total flux cleaned = 0.0117787 Jy
! Component: 2000  -  total flux cleaned = 0.00854028 Jy
! Component: 2050  -  total flux cleaned = 0.00636006 Jy
! Component: 2100  -  total flux cleaned = 0.00305335 Jy
! Component: 2150  -  total flux cleaned = 0.000539513 Jy
! Component: 2200  -  total flux cleaned = -0.00256403 Jy
! Component: 2250  -  total flux cleaned = -0.00599214 Jy
! Component: 2300  -  total flux cleaned = -0.00859405 Jy
! Component: 2350  -  total flux cleaned = -0.01181 Jy
! Component: 2400  -  total flux cleaned = -0.0141819 Jy
! Component: 2450  -  total flux cleaned = -0.0159832 Jy
! Component: 2500  -  total flux cleaned = -0.017502 Jy
! Component: 2550  -  total flux cleaned = -0.0196564 Jy
! Component: 2600  -  total flux cleaned = -0.021843 Jy
! Component: 2650  -  total flux cleaned = -0.0234232 Jy
! Component: 2700  -  total flux cleaned = -0.0250296 Jy
! Component: 2750  -  total flux cleaned = -0.0269784 Jy
! Component: 2800  -  total flux cleaned = -0.0282971 Jy
! Component: 2850  -  total flux cleaned = -0.0302952 Jy
! Component: 2900  -  total flux cleaned = -0.0319851 Jy
! Component: 2950  -  total flux cleaned = -0.0347316 Jy
! Component: 3000  -  total flux cleaned = -0.0364744 Jy
! Component: 3050  -  total flux cleaned = -0.0382372 Jy
! Component: 3100  -  total flux cleaned = -0.0400179 Jy
! Component: 3150  -  total flux cleaned = -0.0425512 Jy
! Component: 3200  -  total flux cleaned = -0.0443936 Jy
! Component: 3250  -  total flux cleaned = -0.0462533 Jy
! Component: 3300  -  total flux cleaned = -0.0485183 Jy
! Component: 3350  -  total flux cleaned = -0.0512022 Jy
! Component: 3400  -  total flux cleaned = -0.0523687 Jy
! Component: 3450  -  total flux cleaned = -0.0543367 Jy
! Component: 3500  -  total flux cleaned = -0.0559269 Jy
! Component: 3550  -  total flux cleaned = -0.058349 Jy
! Component: 3600  -  total flux cleaned = -0.0595807 Jy
! Component: 3650  -  total flux cleaned = -0.0612402 Jy
! Component: 3700  -  total flux cleaned = -0.0637715 Jy
! Component: 3750  -  total flux cleaned = -0.0650584 Jy
! Component: 3800  -  total flux cleaned = -0.0667926 Jy
! Component: 3850  -  total flux cleaned = -0.0676703 Jy
! Component: 3900  -  total flux cleaned = -0.0694472 Jy
! Component: 3950  -  total flux cleaned = -0.0712577 Jy
! Component: 4000  -  total flux cleaned = -0.0730941 Jy
! Component: 4050  -  total flux cleaned = -0.0749535 Jy
! Total flux subtracted in 4096 components = -0.0763642 Jy
! Clean residual min=-0.025465 max=0.027206 Jy/beam
! Clean residual mean=0.000419 rms=0.009785 Jy/beam
! Combined flux in latest and established models = -0.036995 Jy
keep
! Adding 550 model components to the UV plane model.
! The established model now contains 679 components and -0.0369949 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0858+7501_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 5.382 x 10.91 at 7.764 degrees (North through East)
! Clean map  min=-0.05223  max=0.035543 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0858+7501_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0355432 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0114478 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -96.6247 96.6247
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0343 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.035 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0858+7501_S_uvs.log closed on Sat Oct  5 18:57:50 2013