! Started logfile: /g0/scr/pima/npcsb_uvs/J0648+7756_S_uvs.log on Sat Oct  5 18:57:16 2013
obs /g0/scr/pima/npcsb_uvs/J0648+7756_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0648+7756_S_uva.fits
! AN table 1: 45 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.466667 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0648+7756
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1260 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0648+7756_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 90 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008625Jy  sigma=0.874145
! Fit after  self-cal, rms=0.913551Jy  sigma=0.773838
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=26.01 mas, bmaj=39.66 mas, bpa=-17.24 degrees
! Estimated noise=41.6574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0849888 Jy
! Component: 100  -  total flux cleaned = 0.0772756 Jy
! Total flux subtracted in 100 components = 0.0772756 Jy
! Clean residual min=-0.012915 max=0.012743 Jy/beam
! Clean residual mean=0.000120 rms=0.006004 Jy/beam
! Combined flux in latest and established models = 0.0772756 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0772756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077008Jy  sigma=0.075488
! Fit after  self-cal, rms=0.075844Jy  sigma=0.075012
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=28.58 mas, bmaj=35.64 mas, bpa=2.266 degrees
! Estimated noise=29.3946 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00298329 Jy
! Component: 100  -  total flux cleaned = -0.00367456 Jy
! Component: 150  -  total flux cleaned = -0.00195593 Jy
! Component: 200  -  total flux cleaned = 0.00058647 Jy
! Total flux subtracted in 200 components = 0.00058647 Jy
! Clean residual min=-0.003409 max=0.003331 Jy/beam
! Clean residual mean=0.000027 rms=0.001488 Jy/beam
! Combined flux in latest and established models = 0.0778621 Jy
! Performing phase self-cal
! Adding 123 model components to the UV plane model.
! The established model now contains 146 components and 0.0778621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076720Jy  sigma=0.066537
! Fit after  self-cal, rms=0.076090Jy  sigma=0.066314
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.93     KP        0.82     LA        1.03     
!   OV        1.00*    PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.95     KP        0.95     LA        0.98     
!   OV        1.00*    PT        0.86     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.90     KP        0.91     LA        0.94     
!   OV        1.00*    PT        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00     KP        0.92     LA        0.74     
!   OV        1.00*    PT        0.87     
! 
! 
! Fit before self-cal, rms=0.076090Jy  sigma=0.066314
! Fit after  self-cal, rms=0.070088Jy  sigma=0.060391
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=28.45 mas, bmaj=35.78 mas, bpa=-0.9072 degrees
! Estimated noise=24.7568 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0125561 Jy
! Component: 100  -  total flux cleaned = -0.012617 Jy
! Component: 150  -  total flux cleaned = -0.0127828 Jy
! Component: 200  -  total flux cleaned = -0.0132814 Jy
! Total flux subtracted in 200 components = -0.0132814 Jy
! Clean residual min=-0.000878 max=0.000875 Jy/beam
! Clean residual mean=-0.000005 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0645807 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 189 components and 0.0645807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063134Jy  sigma=0.062777
! Fit after  self-cal, rms=0.063002Jy  sigma=0.062685
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063002Jy  sigma=0.062685
! Fit after  self-cal, rms=0.060294Jy  sigma=0.060246
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=28.33 mas, bmaj=35.85 mas, bpa=-2.369 degrees
! Estimated noise=21.5237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0100831 Jy
! Component: 100  -  total flux cleaned = -0.00945344 Jy
! Component: 150  -  total flux cleaned = -0.0102291 Jy
! Component: 200  -  total flux cleaned = -0.0111749 Jy
! Total flux subtracted in 200 components = -0.0111749 Jy
! Clean residual min=-0.000751 max=0.000758 Jy/beam
! Clean residual mean=-0.000008 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0534058 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 255 components and 0.0534058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054742Jy  sigma=0.062567
! Fit after  self-cal, rms=0.054733Jy  sigma=0.062556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000662416 Jy
! Component: 100  -  total flux cleaned = -0.00135293 Jy
! Component: 150  -  total flux cleaned = -0.00207135 Jy
! Component: 200  -  total flux cleaned = -0.00278466 Jy
! Total flux subtracted in 200 components = -0.00278466 Jy
! Clean residual min=-0.000629 max=0.000620 Jy/beam
! Clean residual mean=-0.000005 rms=0.000222 Jy/beam
! Combined flux in latest and established models = 0.0506211 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 309 components and 0.0506211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054546Jy  sigma=0.062707
! Fit after  self-cal, rms=0.054543Jy  sigma=0.062699
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054543Jy  sigma=0.062699
! Fit after  self-cal, rms=0.052053Jy  sigma=0.060152
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=28.18 mas, bmaj=35.94 mas, bpa=-3.893 degrees
! Estimated noise=18.6159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0078693 Jy
! Component: 100  -  total flux cleaned = -0.00756636 Jy
! Component: 150  -  total flux cleaned = -0.00812575 Jy
! Component: 200  -  total flux cleaned = -0.00865981 Jy
! Total flux subtracted in 200 components = -0.00865981 Jy
! Clean residual min=-0.000613 max=0.000608 Jy/beam
! Clean residual mean=-0.000008 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0419613 Jy
selfcal
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 375 components and 0.0419613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047261Jy  sigma=0.062485
! Fit after  self-cal, rms=0.047270Jy  sigma=0.062480
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000829295 Jy
! Component: 100  -  total flux cleaned = -0.00128783 Jy
! Component: 150  -  total flux cleaned = -0.00173685 Jy
! Component: 200  -  total flux cleaned = -0.00221051 Jy
! Total flux subtracted in 200 components = -0.00221051 Jy
! Clean residual min=-0.000466 max=0.000457 Jy/beam
! Clean residual mean=-0.000004 rms=0.000163 Jy/beam
! Combined flux in latest and established models = 0.0397508 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 401 components and 0.0397508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047130Jy  sigma=0.062629
! Fit after  self-cal, rms=0.047132Jy  sigma=0.062625
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047132Jy  sigma=0.062625
! Fit after  self-cal, rms=0.044995Jy  sigma=0.060071
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=28.17 mas, bmaj=36.19 mas, bpa=-5.205 degrees
! Estimated noise=16.0503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00641917 Jy
! Component: 100  -  total flux cleaned = -0.00629928 Jy
! Component: 150  -  total flux cleaned = -0.00670822 Jy
! Component: 200  -  total flux cleaned = -0.00689304 Jy
! Total flux subtracted in 200 components = -0.00689304 Jy
! Clean residual min=-0.000504 max=0.000507 Jy/beam
! Clean residual mean=-0.000007 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.0328577 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 469 components and 0.0328577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040833Jy  sigma=0.062419
! Fit after  self-cal, rms=0.040847Jy  sigma=0.062412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000498083 Jy
! Component: 100  -  total flux cleaned = -0.000717871 Jy
! Component: 150  -  total flux cleaned = -0.000898197 Jy
! Component: 200  -  total flux cleaned = -0.00111771 Jy
! Total flux subtracted in 200 components = -0.00111771 Jy
! Clean residual min=-0.000331 max=0.000328 Jy/beam
! Clean residual mean=-0.000004 rms=0.000123 Jy/beam
! Combined flux in latest and established models = 0.03174 Jy
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 511 components and 0.03174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040733Jy  sigma=0.062561
! Fit after  self-cal, rms=0.040735Jy  sigma=0.062559
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=28.02 mas, bmaj=36.04 mas, bpa=-5.356 degrees
! Estimated noise=16.083 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 28.02 x 36.04 at -5.356 degrees (North through East)
! Clean map  min=-0.013517  max=0.052224 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=25.43 mas, bmaj=41.09 mas, bpa=-19.17 degrees
! Estimated noise=22.3948 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357398 Jy
! Component: 100  -  total flux cleaned = 0.0372069 Jy
! Component: 150  -  total flux cleaned = 0.0357184 Jy
! Component: 200  -  total flux cleaned = 0.0322048 Jy
! Total flux subtracted in 200 components = 0.0322048 Jy
! Clean residual min=-0.003759 max=0.003631 Jy/beam
! Clean residual mean=0.000027 rms=0.001638 Jy/beam
! Combined flux in latest and established models = 0.0322048 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 87 model components to the UV plane model.
! The established model now contains 87 components and 0.0322048 Jy
! Inverting map and beam 
! Estimated beam: bmin=28.02 mas, bmaj=36.04 mas, bpa=-5.356 degrees
! Estimated noise=16.083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00506897 Jy
! Component: 100  -  total flux cleaned = 0.00501432 Jy
! Component: 150  -  total flux cleaned = 0.00508741 Jy
! Component: 200  -  total flux cleaned = 0.00579757 Jy
! Total flux subtracted in 200 components = 0.00579757 Jy
! Clean residual min=-0.001328 max=0.001313 Jy/beam
! Clean residual mean=0.000012 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.0380024 Jy
! Adding 88 model components to the UV plane model.
! The established model now contains 175 components and 0.0380024 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=28.17 mas, bmaj=36.19 mas, bpa=-5.205 degrees
! Estimated noise=16.0503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396771 Jy
! Component: 100  -  total flux cleaned = -0.000135853 Jy
! Component: 150  -  total flux cleaned = -0.000429542 Jy
! Component: 200  -  total flux cleaned = -0.000790453 Jy
! Total flux subtracted in 200 components = -0.000790453 Jy
! Clean residual min=-0.000713 max=0.000688 Jy/beam
! Clean residual mean=-0.000012 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.037212 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000544569 Jy
! Component: 100  -  total flux cleaned = -0.00107396 Jy
! Component: 150  -  total flux cleaned = -0.00169516 Jy
! Component: 200  -  total flux cleaned = -0.00243468 Jy
! Total flux subtracted in 200 components = -0.00243468 Jy
! Clean residual min=-0.001312 max=0.001346 Jy/beam
! Clean residual mean=-0.000025 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.0347773 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 248 components and 0.0347773 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=28.02 mas, bmaj=36.04 mas, bpa=-5.356 degrees
! Estimated noise=16.083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000743664 Jy
! Component: 100  -  total flux cleaned = 0.000447044 Jy
! Component: 150  -  total flux cleaned = 1.45645e-05 Jy
! Component: 200  -  total flux cleaned = -0.000430951 Jy
! Total flux subtracted in 200 components = -0.000430951 Jy
! Clean residual min=-0.000709 max=0.000695 Jy/beam
! Clean residual mean=-0.000004 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0343463 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 296 components and 0.0343463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040784Jy  sigma=0.062705
! Fit after  self-cal, rms=0.040752Jy  sigma=0.062676
wmodel /g0/scr/pima/npcsb_uvs/J0648+7756_S_map.mod
! Writing 296 model components to file: /g0/scr/pima/npcsb_uvs/J0648+7756_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0648+7756_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0648+7756_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0648+7756_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J0648+7756_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 28.02 x 36.04 at -5.356 degrees (North through East)
! Clean map  min=-0.016971  max=0.047596 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0648+7756_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0475963 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000210162 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.32466 1.32466 2.64931 5.29862 10.5972 21.1945 42.389 84.778
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.047 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0648+7756_S_uvs.log closed on Sat Oct  5 18:57:19 2013