! Started logfile: /g0/scr/pima/npcsb_uvs/J0621+7605_X_uvs.log on Sat Oct 5 18:51:48 2013 obs /g0/scr/pima/npcsb_uvs/J0621+7605_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0621+7605_X_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.818357 visibilities/baseline/integration-bin. ! Found source: J0621+7605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6776 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0621+7605_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998342Jy sigma=0.932545 ! Fit after self-cal, rms=0.934808Jy sigma=0.830033 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.698 mas, bmaj=2.457 mas, bpa=9.164 degrees ! Estimated noise=21.271 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0655741 Jy ! Component: 100 - total flux cleaned = 0.0831878 Jy ! Total flux subtracted in 100 components = 0.0831878 Jy ! Clean residual min=-0.009758 max=0.012899 Jy/beam ! Clean residual mean=0.000004 rms=0.002513 Jy/beam ! Combined flux in latest and established models = 0.0831879 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0831879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088885Jy sigma=0.091302 ! Fit after self-cal, rms=0.087543Jy sigma=0.090084 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.044 mas, bmaj=2.726 mas, bpa=7.14 degrees ! Estimated noise=10.3263 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0193952 Jy ! Component: 100 - total flux cleaned = 0.0277198 Jy ! Component: 150 - total flux cleaned = 0.0320625 Jy ! Component: 200 - total flux cleaned = 0.0347012 Jy ! Total flux subtracted in 200 components = 0.0347012 Jy ! Clean residual min=-0.007240 max=0.012810 Jy/beam ! Clean residual mean=-0.000005 rms=0.002299 Jy/beam ! Combined flux in latest and established models = 0.117889 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.117889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089059Jy sigma=0.081729 ! Fit after self-cal, rms=0.088859Jy sigma=0.081571 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.89 HN 0.87 KP 0.96 ! LA 0.91 MK 0.88 NL 1.19 OV 0.95 ! PT 0.91 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.91 HN 0.96 KP 0.84 ! LA 0.82 MK 0.90 NL 1.19 OV 0.96 ! PT 1.00 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.92 HN 0.86 KP 0.75 ! LA 0.89 MK 0.72 NL 1.20 OV 0.97 ! PT 0.90 SC 0.81 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.90 HN 0.89 KP 0.77 ! LA 0.82 MK 0.65 NL 1.18 OV 0.94 ! PT 0.99 SC 0.91 ! ! ! Fit before self-cal, rms=0.088859Jy sigma=0.081571 ! Fit after self-cal, rms=0.080643Jy sigma=0.077004 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9991 mas, bmaj=2.685 mas, bpa=8.176 degrees ! Estimated noise=8.40306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0128528 Jy ! Component: 100 - total flux cleaned = -0.0151799 Jy ! Component: 150 - total flux cleaned = -0.0151144 Jy ! Component: 200 - total flux cleaned = -0.0150262 Jy ! Total flux subtracted in 200 components = -0.0150262 Jy ! Clean residual min=-0.004278 max=0.007902 Jy/beam ! Clean residual mean=-0.000002 rms=0.001409 Jy/beam ! Combined flux in latest and established models = 0.102863 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 25 components and 0.102863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074928Jy sigma=0.079143 ! Fit after self-cal, rms=0.075142Jy sigma=0.079048 ! Inverting map ! Added new window around map position (-3.2, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762691 Jy ! Component: 100 - total flux cleaned = 0.00938223 Jy ! Component: 150 - total flux cleaned = 0.00936738 Jy ! Component: 200 - total flux cleaned = 0.00994081 Jy ! Total flux subtracted in 200 components = 0.00994081 Jy ! Clean residual min=-0.003605 max=0.003866 Jy/beam ! Clean residual mean=0.000005 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.112804 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 43 components and 0.112804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074066Jy sigma=0.078051 ! Fit after self-cal, rms=0.073865Jy sigma=0.077802 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073865Jy sigma=0.077802 ! Fit after self-cal, rms=0.065121Jy sigma=0.075547 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9678 mas, bmaj=2.671 mas, bpa=8.446 degrees ! Estimated noise=6.97534 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0102689 Jy ! Component: 100 - total flux cleaned = -0.0104003 Jy ! Component: 150 - total flux cleaned = -0.0103002 Jy ! Component: 200 - total flux cleaned = -0.0101201 Jy ! Total flux subtracted in 200 components = -0.0101201 Jy ! Clean residual min=-0.002507 max=0.002761 Jy/beam ! Clean residual mean=0.000003 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.102684 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.102684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060547Jy sigma=0.077309 ! Fit after self-cal, rms=0.060481Jy sigma=0.077198 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000813171 Jy ! Component: 100 - total flux cleaned = 0.000998263 Jy ! Component: 150 - total flux cleaned = 0.00119449 Jy ! Component: 200 - total flux cleaned = 0.0012924 Jy ! Total flux subtracted in 200 components = 0.0012924 Jy ! Clean residual min=-0.002475 max=0.002467 Jy/beam ! Clean residual mean=0.000004 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.103976 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 75 components and 0.103976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060240Jy sigma=0.077228 ! Fit after self-cal, rms=0.060236Jy sigma=0.077207 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060236Jy sigma=0.077207 ! Fit after self-cal, rms=0.053527Jy sigma=0.075220 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9358 mas, bmaj=2.671 mas, bpa=8.71 degrees ! Estimated noise=5.87319 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00788471 Jy ! Component: 100 - total flux cleaned = -0.00981805 Jy ! Component: 150 - total flux cleaned = -0.010167 Jy ! Component: 200 - total flux cleaned = -0.0103847 Jy ! Total flux subtracted in 200 components = -0.0103847 Jy ! Clean residual min=-0.002034 max=0.002139 Jy/beam ! Clean residual mean=0.000003 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0935913 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.0935913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050168Jy sigma=0.077054 ! Fit after self-cal, rms=0.050136Jy sigma=0.077022 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000139692 Jy ! Component: 100 - total flux cleaned = 0.000162995 Jy ! Component: 150 - total flux cleaned = 0.000252305 Jy ! Component: 200 - total flux cleaned = 0.000233802 Jy ! Total flux subtracted in 200 components = 0.000233802 Jy ! Clean residual min=-0.002081 max=0.002090 Jy/beam ! Clean residual mean=0.000003 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0938251 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 89 components and 0.0938251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050004Jy sigma=0.077084 ! Fit after self-cal, rms=0.050033Jy sigma=0.077069 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050033Jy sigma=0.077069 ! Fit after self-cal, rms=0.044869Jy sigma=0.075192 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=3.164 mas, bpa=12.3 degrees ! Estimated noise=5.95609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00723835 Jy ! Component: 100 - total flux cleaned = -0.00913328 Jy ! Component: 150 - total flux cleaned = -0.00998732 Jy ! Component: 200 - total flux cleaned = -0.0101804 Jy ! Total flux subtracted in 200 components = -0.0101804 Jy ! Clean residual min=-0.001968 max=0.002040 Jy/beam ! Clean residual mean=0.000003 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0836446 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.0836446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042053Jy sigma=0.077236 ! Fit after self-cal, rms=0.042030Jy sigma=0.077202 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000138738 Jy ! Component: 100 - total flux cleaned = 0.000192971 Jy ! Component: 150 - total flux cleaned = 0.00026922 Jy ! Component: 200 - total flux cleaned = 0.000296113 Jy ! Total flux subtracted in 200 components = 0.000296113 Jy ! Clean residual min=-0.001972 max=0.002007 Jy/beam ! Clean residual mean=0.000003 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0839407 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.0839407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.041975Jy sigma=0.077229 ! Fit after self-cal, rms=0.041978Jy sigma=0.077223 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9105 mas, bmaj=2.676 mas, bpa=8.955 degrees ! Estimated noise=4.97257 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9105 x 2.676 at 8.955 degrees (North through East) ! Clean map min=-0.001566 max=0.040773 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6036 mas, bmaj=2.508 mas, bpa=10.73 degrees ! Estimated noise=9.15149 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288494 Jy ! Component: 100 - total flux cleaned = 0.0396329 Jy ! Component: 150 - total flux cleaned = 0.0465347 Jy ! Component: 200 - total flux cleaned = 0.051519 Jy ! Total flux subtracted in 200 components = 0.051519 Jy ! Clean residual min=-0.003393 max=0.004150 Jy/beam ! Clean residual mean=0.000000 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.051519 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.051519 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9105 mas, bmaj=2.676 mas, bpa=8.955 degrees ! Estimated noise=4.97257 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0091762 Jy ! Component: 100 - total flux cleaned = 0.0152538 Jy ! Component: 150 - total flux cleaned = 0.0194616 Jy ! Component: 200 - total flux cleaned = 0.0224312 Jy ! Total flux subtracted in 200 components = 0.0224312 Jy ! Clean residual min=-0.002158 max=0.002161 Jy/beam ! Clean residual mean=-0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.0739503 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 40 components and 0.0739503 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=3.164 mas, bpa=12.3 degrees ! Estimated noise=5.95609 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345194 Jy ! Component: 100 - total flux cleaned = 0.00545996 Jy ! Component: 150 - total flux cleaned = 0.00680334 Jy ! Component: 200 - total flux cleaned = 0.00776228 Jy ! Total flux subtracted in 200 components = 0.00776228 Jy ! Clean residual min=-0.002216 max=0.002111 Jy/beam ! Clean residual mean=0.000001 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.0817125 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415017 Jy ! Component: 100 - total flux cleaned = 0.000733565 Jy ! Component: 150 - total flux cleaned = 0.000964519 Jy ! Component: 200 - total flux cleaned = 0.00116615 Jy ! Total flux subtracted in 200 components = 0.00116615 Jy ! Clean residual min=-0.002100 max=0.002017 Jy/beam ! Clean residual mean=0.000002 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.0828787 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 94 components and 0.0828787 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9105 mas, bmaj=2.676 mas, bpa=8.955 degrees ! Estimated noise=4.97257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.0492e-05 Jy ! Component: 100 - total flux cleaned = 5.44806e-05 Jy ! Component: 150 - total flux cleaned = 7.7077e-05 Jy ! Component: 200 - total flux cleaned = 0.000157163 Jy ! Total flux subtracted in 200 components = 0.000157163 Jy ! Clean residual min=-0.001781 max=0.001901 Jy/beam ! Clean residual mean=0.000001 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.0830359 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 109 components and 0.0830359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042035Jy sigma=0.077319 ! Fit after self-cal, rms=0.042026Jy sigma=0.077228 wmodel /g0/scr/pima/npcsb_uvs/J0621+7605_X_map.mod ! Writing 109 model components to file: /g0/scr/pima/npcsb_uvs/J0621+7605_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0621+7605_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0621+7605_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0621+7605_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0621+7605_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000218287 Jy ! Component: 100 - total flux cleaned = -0.000442713 Jy ! Component: 150 - total flux cleaned = -0.000520671 Jy ! Component: 200 - total flux cleaned = -0.000569203 Jy ! Component: 250 - total flux cleaned = -0.000592861 Jy ! Component: 300 - total flux cleaned = -0.000749877 Jy ! Component: 350 - total flux cleaned = -0.000879826 Jy ! Component: 400 - total flux cleaned = -0.000964141 Jy ! Component: 450 - total flux cleaned = -0.00108824 Jy ! Component: 500 - total flux cleaned = -0.00118964 Jy ! Component: 550 - total flux cleaned = -0.00130903 Jy ! Component: 600 - total flux cleaned = -0.00144496 Jy ! Component: 650 - total flux cleaned = -0.00152114 Jy ! Component: 700 - total flux cleaned = -0.00161522 Jy ! Component: 750 - total flux cleaned = -0.00174383 Jy ! Component: 800 - total flux cleaned = -0.00185222 Jy ! Component: 850 - total flux cleaned = -0.00194122 Jy ! Component: 900 - total flux cleaned = -0.00195926 Jy ! Component: 950 - total flux cleaned = -0.00204537 Jy ! Component: 1000 - total flux cleaned = -0.00209598 Jy ! Component: 1050 - total flux cleaned = -0.00217911 Jy ! Component: 1100 - total flux cleaned = -0.0022449 Jy ! Component: 1150 - total flux cleaned = -0.00227726 Jy ! Component: 1200 - total flux cleaned = -0.00237352 Jy ! Component: 1250 - total flux cleaned = -0.00243682 Jy ! Component: 1300 - total flux cleaned = -0.00248369 Jy ! Component: 1350 - total flux cleaned = -0.00256067 Jy ! Component: 1400 - total flux cleaned = -0.00260634 Jy ! Component: 1450 - total flux cleaned = -0.00262166 Jy ! Component: 1500 - total flux cleaned = -0.0027412 Jy ! Component: 1550 - total flux cleaned = -0.00280014 Jy ! Component: 1600 - total flux cleaned = -0.00287346 Jy ! Component: 1650 - total flux cleaned = -0.00297491 Jy ! Component: 1700 - total flux cleaned = -0.00300351 Jy ! Component: 1750 - total flux cleaned = -0.00310319 Jy ! Component: 1800 - total flux cleaned = -0.00318775 Jy ! Component: 1850 - total flux cleaned = -0.00328551 Jy ! Component: 1900 - total flux cleaned = -0.00336838 Jy ! Component: 1950 - total flux cleaned = -0.00342335 Jy ! Component: 2000 - total flux cleaned = -0.00349122 Jy ! Component: 2050 - total flux cleaned = -0.00355849 Jy ! Component: 2100 - total flux cleaned = -0.00358523 Jy ! Component: 2150 - total flux cleaned = -0.00370451 Jy ! Component: 2200 - total flux cleaned = -0.00373062 Jy ! Component: 2250 - total flux cleaned = -0.00376978 Jy ! Component: 2300 - total flux cleaned = -0.00380855 Jy ! Component: 2350 - total flux cleaned = -0.00386002 Jy ! Component: 2400 - total flux cleaned = -0.00389829 Jy ! Component: 2450 - total flux cleaned = -0.00389856 Jy ! Component: 2500 - total flux cleaned = -0.00394887 Jy ! Component: 2550 - total flux cleaned = -0.00402369 Jy ! Component: 2600 - total flux cleaned = -0.00404858 Jy ! Component: 2650 - total flux cleaned = -0.00412224 Jy ! Component: 2700 - total flux cleaned = -0.00414658 Jy ! Component: 2750 - total flux cleaned = -0.00418291 Jy ! Component: 2800 - total flux cleaned = -0.00426702 Jy ! Component: 2850 - total flux cleaned = -0.00431477 Jy ! Component: 2900 - total flux cleaned = -0.00440946 Jy ! Component: 2950 - total flux cleaned = -0.00445664 Jy ! Component: 3000 - total flux cleaned = -0.00451498 Jy ! Component: 3050 - total flux cleaned = -0.00456141 Jy ! Component: 3100 - total flux cleaned = -0.00463071 Jy ! Component: 3150 - total flux cleaned = -0.0047109 Jy ! Component: 3200 - total flux cleaned = -0.00480185 Jy ! Component: 3250 - total flux cleaned = -0.00488104 Jy ! Component: 3300 - total flux cleaned = -0.00495956 Jy ! Component: 3350 - total flux cleaned = -0.00498188 Jy ! Component: 3400 - total flux cleaned = -0.00502632 Jy ! Component: 3450 - total flux cleaned = -0.00512556 Jy ! Component: 3500 - total flux cleaned = -0.00518033 Jy ! Component: 3550 - total flux cleaned = -0.00522394 Jy ! Component: 3600 - total flux cleaned = -0.00529977 Jy ! Component: 3650 - total flux cleaned = -0.00538585 Jy ! Component: 3700 - total flux cleaned = -0.0054287 Jy ! Component: 3750 - total flux cleaned = -0.00552448 Jy ! Component: 3800 - total flux cleaned = -0.00561972 Jy ! Component: 3850 - total flux cleaned = -0.00560912 Jy ! Component: 3900 - total flux cleaned = -0.00567193 Jy ! Component: 3950 - total flux cleaned = -0.0057032 Jy ! Component: 4000 - total flux cleaned = -0.00579651 Jy ! Component: 4050 - total flux cleaned = -0.00580676 Jy ! Total flux subtracted in 4096 components = -0.00583757 Jy ! Clean residual min=-0.000588 max=0.000636 Jy/beam ! Clean residual mean=0.000001 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.0771983 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 377 components and 0.0771983 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0621+7605_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9105 x 2.676 at 8.955 degrees (North through East) ! Clean map min=-0.0013889 max=0.040071 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0621+7605_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0400706 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175703 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31545 1.31545 2.63091 5.26181 10.5236 21.0473 42.0945 84.189 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.04 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0621+7605_X_uvs.log closed on Sat Oct 5 18:51:52 2013