! Started logfile: /g0/scr/pima/npcsb_uvs/J0540+7519_S_uvs.log on Sat Oct 5 18:57:02 2013 obs /g0/scr/pima/npcsb_uvs/J0540+7519_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0540+7519_S_uva.fits ! AN table 1: 46 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.857143 visibilities/baseline/integration-bin. ! Found source: J0540+7519 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3312 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0540+7519_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.005948Jy sigma=0.865037 ! Fit after self-cal, rms=0.941409Jy sigma=0.763366 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.597 mas, bmaj=10.15 mas, bpa=40.6 degrees ! Estimated noise=35.2146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0634014 Jy ! Component: 100 - total flux cleaned = 0.0803735 Jy ! Total flux subtracted in 100 components = 0.0803735 Jy ! Clean residual min=-0.010982 max=0.011611 Jy/beam ! Clean residual mean=0.000017 rms=0.003891 Jy/beam ! Combined flux in latest and established models = 0.0803735 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0803735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081968Jy sigma=0.085253 ! Fit after self-cal, rms=0.081117Jy sigma=0.084669 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.38 mas, bmaj=12.47 mas, bpa=26.99 degrees ! Estimated noise=16.2579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020093 Jy ! Component: 100 - total flux cleaned = 0.0322898 Jy ! Component: 150 - total flux cleaned = 0.0406391 Jy ! Component: 200 - total flux cleaned = 0.0464134 Jy ! Total flux subtracted in 200 components = 0.0464134 Jy ! Clean residual min=-0.013835 max=0.011453 Jy/beam ! Clean residual mean=-0.000001 rms=0.004715 Jy/beam ! Combined flux in latest and established models = 0.126787 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 83 components and 0.126787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082127Jy sigma=0.075130 ! Fit after self-cal, rms=0.081906Jy sigma=0.074983 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.06 KP 1.02 LA 0.81 ! NL 0.92 OV 1.08 PT 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.97 KP 0.98 LA 0.85 ! NL 0.88 OV 1.02 PT 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 1.12 KP 1.03 LA 0.61 ! NL 1.07 OV 1.01 PT 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 1.09 KP 0.93 LA 0.61 ! NL 0.92 OV 0.79 PT 0.83 ! ! ! Fit before self-cal, rms=0.081906Jy sigma=0.074983 ! Fit after self-cal, rms=0.072496Jy sigma=0.066463 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=10.46 mas, bmaj=12.7 mas, bpa=30.36 degrees ! Estimated noise=13.016 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.013098 Jy ! Component: 100 - total flux cleaned = -0.0162891 Jy ! Component: 150 - total flux cleaned = -0.0179409 Jy ! Component: 200 - total flux cleaned = -0.0181332 Jy ! Total flux subtracted in 200 components = -0.0181332 Jy ! Clean residual min=-0.003953 max=0.006536 Jy/beam ! Clean residual mean=-0.000007 rms=0.001754 Jy/beam ! Combined flux in latest and established models = 0.108654 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 118 components and 0.108654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065636Jy sigma=0.069009 ! Fit after self-cal, rms=0.065987Jy sigma=0.068726 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065987Jy sigma=0.068726 ! Fit after self-cal, rms=0.059937Jy sigma=0.066095 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.35 mas, bmaj=12.51 mas, bpa=31.7 degrees ! Estimated noise=10.6465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105154 Jy ! Component: 100 - total flux cleaned = -0.0133172 Jy ! Component: 150 - total flux cleaned = -0.0148932 Jy ! Component: 200 - total flux cleaned = -0.0156022 Jy ! Total flux subtracted in 200 components = -0.0156022 Jy ! Clean residual min=-0.003406 max=0.005029 Jy/beam ! Clean residual mean=-0.000005 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.0930515 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 141 components and 0.0930515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054491Jy sigma=0.068616 ! Fit after self-cal, rms=0.054536Jy sigma=0.068601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000279708 Jy ! Component: 100 - total flux cleaned = -0.000305937 Jy ! Component: 150 - total flux cleaned = -0.000331092 Jy ! Component: 200 - total flux cleaned = -0.000330423 Jy ! Total flux subtracted in 200 components = -0.000330423 Jy ! Clean residual min=-0.003573 max=0.005044 Jy/beam ! Clean residual mean=-0.000005 rms=0.001375 Jy/beam ! Combined flux in latest and established models = 0.0927211 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 157 components and 0.0927211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054409Jy sigma=0.068728 ! Fit after self-cal, rms=0.054404Jy sigma=0.068725 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054404Jy sigma=0.068725 ! Fit after self-cal, rms=0.049153Jy sigma=0.066022 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.24 mas, bmaj=12.31 mas, bpa=32.83 degrees ! Estimated noise=8.69031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00821802 Jy ! Component: 100 - total flux cleaned = -0.0105576 Jy ! Component: 150 - total flux cleaned = -0.0119031 Jy ! Component: 200 - total flux cleaned = -0.012759 Jy ! Total flux subtracted in 200 components = -0.012759 Jy ! Clean residual min=-0.002796 max=0.004035 Jy/beam ! Clean residual mean=-0.000004 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.0799621 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 180 components and 0.079962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044896Jy sigma=0.068543 ! Fit after self-cal, rms=0.044897Jy sigma=0.068533 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000353849 Jy ! Component: 100 - total flux cleaned = -0.000375257 Jy ! Component: 150 - total flux cleaned = -0.000393157 Jy ! Component: 200 - total flux cleaned = -0.000392997 Jy ! Total flux subtracted in 200 components = -0.000392997 Jy ! Clean residual min=-0.002885 max=0.004045 Jy/beam ! Clean residual mean=-0.000003 rms=0.001095 Jy/beam ! Combined flux in latest and established models = 0.079569 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 186 components and 0.079569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044795Jy sigma=0.068667 ! Fit after self-cal, rms=0.044781Jy sigma=0.068657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044781Jy sigma=0.068657 ! Fit after self-cal, rms=0.040436Jy sigma=0.065945 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.15 mas, bmaj=13.35 mas, bpa=29.76 degrees ! Estimated noise=7.14916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00700234 Jy ! Component: 100 - total flux cleaned = -0.00903909 Jy ! Component: 150 - total flux cleaned = -0.0101198 Jy ! Component: 200 - total flux cleaned = -0.0107719 Jy ! Total flux subtracted in 200 components = -0.0107719 Jy ! Clean residual min=-0.002481 max=0.003590 Jy/beam ! Clean residual mean=-0.000004 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.0687971 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 213 components and 0.0687971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.036891Jy sigma=0.068523 ! Fit after self-cal, rms=0.036881Jy sigma=0.068510 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436158 Jy ! Component: 100 - total flux cleaned = -0.000449566 Jy ! Component: 150 - total flux cleaned = -0.000461185 Jy ! Component: 200 - total flux cleaned = -0.000461049 Jy ! Total flux subtracted in 200 components = -0.000461049 Jy ! Clean residual min=-0.002583 max=0.003600 Jy/beam ! Clean residual mean=-0.000003 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.0683361 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 216 components and 0.0683361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.036800Jy sigma=0.068648 ! Fit after self-cal, rms=0.036799Jy sigma=0.068645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=10.13 mas, bmaj=12.11 mas, bpa=33.97 degrees ! Estimated noise=7.06928 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.13 x 12.11 at 33.97 degrees (North through East) ! Clean map min=-0.0023656 max=0.038165 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.356 mas, bmaj=10.25 mas, bpa=48.01 degrees ! Estimated noise=14.7606 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0262533 Jy ! Component: 100 - total flux cleaned = 0.0351766 Jy ! Component: 150 - total flux cleaned = 0.0414489 Jy ! Component: 200 - total flux cleaned = 0.046128 Jy ! Total flux subtracted in 200 components = 0.046128 Jy ! Clean residual min=-0.003804 max=0.004381 Jy/beam ! Clean residual mean=0.000005 rms=0.001358 Jy/beam ! Combined flux in latest and established models = 0.046128 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.046128 Jy ! Inverting map and beam ! Estimated beam: bmin=10.13 mas, bmaj=12.11 mas, bpa=33.97 degrees ! Estimated noise=7.06928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00673681 Jy ! Component: 100 - total flux cleaned = 0.0109521 Jy ! Component: 150 - total flux cleaned = 0.0139396 Jy ! Component: 200 - total flux cleaned = 0.0160882 Jy ! Total flux subtracted in 200 components = 0.0160882 Jy ! Clean residual min=-0.002802 max=0.003323 Jy/beam ! Clean residual mean=0.000002 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 0.0622162 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 96 components and 0.0622162 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.15 mas, bmaj=13.35 mas, bpa=29.76 degrees ! Estimated noise=7.14916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191109 Jy ! Component: 100 - total flux cleaned = 0.00319996 Jy ! Component: 150 - total flux cleaned = 0.00407949 Jy ! Component: 200 - total flux cleaned = 0.00468098 Jy ! Total flux subtracted in 200 components = 0.00468098 Jy ! Clean residual min=-0.002697 max=0.003407 Jy/beam ! Clean residual mean=-0.000001 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 0.0668972 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000412026 Jy ! Component: 100 - total flux cleaned = 0.00069436 Jy ! Component: 150 - total flux cleaned = 0.000804184 Jy ! Component: 200 - total flux cleaned = 0.000833921 Jy ! Total flux subtracted in 200 components = 0.000833921 Jy ! Clean residual min=-0.002617 max=0.003459 Jy/beam ! Clean residual mean=-0.000002 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.0677311 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 114 components and 0.0677311 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=10.13 mas, bmaj=12.11 mas, bpa=33.97 degrees ! Estimated noise=7.06928 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.90589e-05 Jy ! Component: 100 - total flux cleaned = -5.98126e-05 Jy ! Component: 150 - total flux cleaned = -6.82256e-05 Jy ! Component: 200 - total flux cleaned = -7.60265e-05 Jy ! Total flux subtracted in 200 components = -7.60265e-05 Jy ! Clean residual min=-0.002384 max=0.003091 Jy/beam ! Clean residual mean=-0.000002 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.067655 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 124 components and 0.0676551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.036865Jy sigma=0.068694 ! Fit after self-cal, rms=0.036839Jy sigma=0.068679 wmodel /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.mod ! Writing 124 model components to file: /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J0540+7519_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0540+7519_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134138 Jy ! Component: 100 - total flux cleaned = 0.00234399 Jy ! Component: 150 - total flux cleaned = 0.00293559 Jy ! Component: 200 - total flux cleaned = 0.0034849 Jy ! Component: 250 - total flux cleaned = 0.00371728 Jy ! Component: 300 - total flux cleaned = 0.00376975 Jy ! Component: 350 - total flux cleaned = 0.00372112 Jy ! Component: 400 - total flux cleaned = 0.00363153 Jy ! Component: 450 - total flux cleaned = 0.00359004 Jy ! Component: 500 - total flux cleaned = 0.00351128 Jy ! Component: 550 - total flux cleaned = 0.00345614 Jy ! Component: 600 - total flux cleaned = 0.00338634 Jy ! Component: 650 - total flux cleaned = 0.00330419 Jy ! Component: 700 - total flux cleaned = 0.00327231 Jy ! Component: 750 - total flux cleaned = 0.00328747 Jy ! Component: 800 - total flux cleaned = 0.00331645 Jy ! Component: 850 - total flux cleaned = 0.00335876 Jy ! Component: 900 - total flux cleaned = 0.00337242 Jy ! Component: 950 - total flux cleaned = 0.00337246 Jy ! Component: 1000 - total flux cleaned = 0.00337272 Jy ! Component: 1050 - total flux cleaned = 0.00342378 Jy ! Component: 1100 - total flux cleaned = 0.00347329 Jy ! Component: 1150 - total flux cleaned = 0.00349725 Jy ! Component: 1200 - total flux cleaned = 0.00353254 Jy ! Component: 1250 - total flux cleaned = 0.00357853 Jy ! Component: 1300 - total flux cleaned = 0.00363485 Jy ! Component: 1350 - total flux cleaned = 0.00365715 Jy ! Component: 1400 - total flux cleaned = 0.00373315 Jy ! Component: 1450 - total flux cleaned = 0.00372264 Jy ! Component: 1500 - total flux cleaned = 0.00376453 Jy ! Component: 1550 - total flux cleaned = 0.00382623 Jy ! Component: 1600 - total flux cleaned = 0.00389714 Jy ! Component: 1650 - total flux cleaned = 0.00396723 Jy ! Component: 1700 - total flux cleaned = 0.00403648 Jy ! Component: 1750 - total flux cleaned = 0.00409516 Jy ! Component: 1800 - total flux cleaned = 0.00417269 Jy ! Component: 1850 - total flux cleaned = 0.00424928 Jy ! Component: 1900 - total flux cleaned = 0.00431572 Jy ! Component: 1950 - total flux cleaned = 0.00439084 Jy ! Component: 2000 - total flux cleaned = 0.00439079 Jy ! Component: 2050 - total flux cleaned = 0.00440925 Jy ! Component: 2100 - total flux cleaned = 0.00442757 Jy ! Component: 2150 - total flux cleaned = 0.00443674 Jy ! Component: 2200 - total flux cleaned = 0.00444588 Jy ! Component: 2250 - total flux cleaned = 0.00446411 Jy ! Component: 2300 - total flux cleaned = 0.00449131 Jy ! Component: 2350 - total flux cleaned = 0.0045095 Jy ! Component: 2400 - total flux cleaned = 0.00455476 Jy ! Component: 2450 - total flux cleaned = 0.00460912 Jy ! Component: 2500 - total flux cleaned = 0.00464543 Jy ! Component: 2550 - total flux cleaned = 0.00471798 Jy ! Component: 2600 - total flux cleaned = 0.00477251 Jy ! Component: 2650 - total flux cleaned = 0.00480897 Jy ! Component: 2700 - total flux cleaned = 0.00486358 Jy ! Component: 2750 - total flux cleaned = 0.00491839 Jy ! Component: 2800 - total flux cleaned = 0.0049733 Jy ! Component: 2850 - total flux cleaned = 0.00503754 Jy ! Component: 2900 - total flux cleaned = 0.00509281 Jy ! Component: 2950 - total flux cleaned = 0.0051483 Jy ! Component: 3000 - total flux cleaned = 0.00519459 Jy ! Component: 3050 - total flux cleaned = 0.0052596 Jy ! Component: 3100 - total flux cleaned = 0.00529692 Jy ! Component: 3150 - total flux cleaned = 0.00537177 Jy ! Component: 3200 - total flux cleaned = 0.00539997 Jy ! Component: 3250 - total flux cleaned = 0.00543778 Jy ! Component: 3300 - total flux cleaned = 0.00548516 Jy ! Component: 3350 - total flux cleaned = 0.00552328 Jy ! Component: 3400 - total flux cleaned = 0.00556155 Jy ! Component: 3450 - total flux cleaned = 0.0056194 Jy ! Component: 3500 - total flux cleaned = 0.0056583 Jy ! Component: 3550 - total flux cleaned = 0.00569729 Jy ! Component: 3600 - total flux cleaned = 0.00575613 Jy ! Component: 3650 - total flux cleaned = 0.00579552 Jy ! Component: 3700 - total flux cleaned = 0.00583521 Jy ! Component: 3750 - total flux cleaned = 0.00587522 Jy ! Component: 3800 - total flux cleaned = 0.00589532 Jy ! Component: 3850 - total flux cleaned = 0.00593583 Jy ! Component: 3900 - total flux cleaned = 0.00596634 Jy ! Component: 3950 - total flux cleaned = 0.0060177 Jy ! Component: 4000 - total flux cleaned = 0.00604871 Jy ! Component: 4050 - total flux cleaned = 0.00609043 Jy ! Total flux subtracted in 4096 components = 0.00612195 Jy ! Clean residual min=-0.000660 max=0.000631 Jy/beam ! Clean residual mean=0.000003 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.073777 Jy keep ! Adding 380 model components to the UV plane model. ! The established model now contains 504 components and 0.0737769 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0540+7519_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 10.13 x 12.11 at 33.97 degrees (North through East) ! Clean map min=-0.0018699 max=0.038005 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0540+7519_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0380046 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000219758 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.73472 1.73472 3.46945 6.9389 13.8778 27.7556 55.5112 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.038 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0540+7519_S_uvs.log closed on Sat Oct 5 18:57:06 2013