! Started logfile: /g0/scr/pima/npcsb_uvs/J0525+8737_S_uvs.log on Sat Oct 5 18:56:57 2013 obs /g0/scr/pima/npcsb_uvs/J0525+8737_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0525+8737_S_uva.fits ! AN table 1: 45 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.533333 visibilities/baseline/integration-bin. ! Found source: J0525+8737 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1440 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0525+8737_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.011420Jy sigma=0.924220 ! Fit after self-cal, rms=0.903101Jy sigma=0.807267 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=20.11 mas, bmaj=51.18 mas, bpa=13.38 degrees ! Estimated noise=31.8751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0984287 Jy ! Component: 100 - total flux cleaned = 0.115858 Jy ! Total flux subtracted in 100 components = 0.115858 Jy ! Clean residual min=-0.015256 max=0.015498 Jy/beam ! Clean residual mean=-0.000207 rms=0.006956 Jy/beam ! Combined flux in latest and established models = 0.115858 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.115858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091772Jy sigma=0.101359 ! Fit after self-cal, rms=0.091482Jy sigma=0.101223 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=22.43 mas, bmaj=47.73 mas, bpa=5.54 degrees ! Estimated noise=25.0733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039704 Jy ! Component: 100 - total flux cleaned = 0.0109663 Jy ! Component: 150 - total flux cleaned = 0.0144205 Jy ! Component: 200 - total flux cleaned = 0.0172832 Jy ! Total flux subtracted in 200 components = 0.0172832 Jy ! Clean residual min=-0.005467 max=0.005425 Jy/beam ! Clean residual mean=0.000073 rms=0.002329 Jy/beam ! Combined flux in latest and established models = 0.133142 Jy ! Performing phase self-cal ! Adding 147 model components to the UV plane model. ! The established model now contains 181 components and 0.133142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092435Jy sigma=0.089239 ! Fit after self-cal, rms=0.091999Jy sigma=0.088863 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 KP 1.04 LA 1.09 ! OV 1.00* PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 KP 0.84 LA 1.13 ! OV 1.00* PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 KP 0.97 LA 0.99 ! OV 1.00* PT 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 KP 0.90 LA 0.70 ! OV 1.00* PT 0.87 ! ! ! Fit before self-cal, rms=0.091999Jy sigma=0.088863 ! Fit after self-cal, rms=0.084345Jy sigma=0.078656 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=22.47 mas, bmaj=47.73 mas, bpa=5.692 degrees ! Estimated noise=21.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0156498 Jy ! Component: 100 - total flux cleaned = -0.0186828 Jy ! Component: 150 - total flux cleaned = -0.018863 Jy ! Component: 200 - total flux cleaned = -0.0184484 Jy ! Total flux subtracted in 200 components = -0.0184484 Jy ! Clean residual min=-0.002264 max=0.002271 Jy/beam ! Clean residual mean=-0.000036 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.114693 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 251 components and 0.114693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075597Jy sigma=0.082248 ! Fit after self-cal, rms=0.075792Jy sigma=0.082058 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075792Jy sigma=0.082058 ! Fit after self-cal, rms=0.070968Jy sigma=0.078234 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=22.37 mas, bmaj=47.58 mas, bpa=6.552 degrees ! Estimated noise=17.9409 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0130959 Jy ! Component: 100 - total flux cleaned = -0.0158828 Jy ! Component: 150 - total flux cleaned = -0.0163248 Jy ! Component: 200 - total flux cleaned = -0.0168325 Jy ! Total flux subtracted in 200 components = -0.0168325 Jy ! Clean residual min=-0.001641 max=0.001647 Jy/beam ! Clean residual mean=-0.000023 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0978606 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 305 components and 0.0978606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063766Jy sigma=0.081697 ! Fit after self-cal, rms=0.063771Jy sigma=0.081679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109289 Jy ! Component: 100 - total flux cleaned = -0.000107663 Jy ! Component: 150 - total flux cleaned = -0.000172116 Jy ! Component: 200 - total flux cleaned = -0.000236711 Jy ! Total flux subtracted in 200 components = -0.000236711 Jy ! Clean residual min=-0.001084 max=0.001085 Jy/beam ! Clean residual mean=-0.000006 rms=0.000395 Jy/beam ! Combined flux in latest and established models = 0.0976238 Jy ! Performing phase self-cal ! Adding 83 model components to the UV plane model. ! The established model now contains 388 components and 0.0976239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063633Jy sigma=0.081556 ! Fit after self-cal, rms=0.063639Jy sigma=0.081519 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063639Jy sigma=0.081519 ! Fit after self-cal, rms=0.059536Jy sigma=0.077831 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=22.14 mas, bmaj=47.6 mas, bpa=7.138 degrees ! Estimated noise=15.037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0110195 Jy ! Component: 100 - total flux cleaned = -0.0124238 Jy ! Component: 150 - total flux cleaned = -0.0123577 Jy ! Component: 200 - total flux cleaned = -0.0122246 Jy ! Total flux subtracted in 200 components = -0.0122246 Jy ! Clean residual min=-0.001026 max=0.001009 Jy/beam ! Clean residual mean=-0.000016 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 0.0853993 Jy selfcal ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 441 components and 0.0853993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053418Jy sigma=0.081327 ! Fit after self-cal, rms=0.053425Jy sigma=0.081308 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490109 Jy ! Component: 100 - total flux cleaned = 0.000875964 Jy ! Component: 150 - total flux cleaned = 0.00109505 Jy ! Component: 200 - total flux cleaned = 0.00105932 Jy ! Total flux subtracted in 200 components = 0.00105932 Jy ! Clean residual min=-0.000609 max=0.000625 Jy/beam ! Clean residual mean=0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.0864586 Jy ! Performing phase self-cal ! Adding 72 model components to the UV plane model. ! The established model now contains 510 components and 0.0864586 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053476Jy sigma=0.081112 ! Fit after self-cal, rms=0.053471Jy sigma=0.081103 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053471Jy sigma=0.081103 ! Fit after self-cal, rms=0.050314Jy sigma=0.077610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=22.2 mas, bmaj=47.51 mas, bpa=7.751 degrees ! Estimated noise=12.6472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00922067 Jy ! Component: 100 - total flux cleaned = -0.00947917 Jy ! Component: 150 - total flux cleaned = -0.00947566 Jy ! Component: 200 - total flux cleaned = -0.00986741 Jy ! Total flux subtracted in 200 components = -0.00986741 Jy ! Clean residual min=-0.000774 max=0.000765 Jy/beam ! Clean residual mean=-0.000010 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.0765912 Jy selfcal ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 572 components and 0.0765912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045252Jy sigma=0.080893 ! Fit after self-cal, rms=0.045271Jy sigma=0.080876 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547726 Jy ! Component: 100 - total flux cleaned = 0.000846287 Jy ! Component: 150 - total flux cleaned = 0.00106463 Jy ! Component: 200 - total flux cleaned = 0.00125846 Jy ! Total flux subtracted in 200 components = 0.00125846 Jy ! Clean residual min=-0.000401 max=0.000408 Jy/beam ! Clean residual mean=-0.000005 rms=0.000144 Jy/beam ! Combined flux in latest and established models = 0.0778497 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 635 components and 0.0778496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045232Jy sigma=0.080903 ! Fit after self-cal, rms=0.045183Jy sigma=0.080895 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=21.91 mas, bmaj=47.59 mas, bpa=7.806 degrees ! Estimated noise=12.6589 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 21.91 x 47.59 at 7.806 degrees (North through East) ! Clean map min=-0.004759 max=0.058763 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=19.7 mas, bmaj=52.19 mas, bpa=14.73 degrees ! Estimated noise=15.5055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451505 Jy ! Component: 100 - total flux cleaned = 0.0497922 Jy ! Component: 150 - total flux cleaned = 0.0530438 Jy ! Component: 200 - total flux cleaned = 0.0567254 Jy ! Total flux subtracted in 200 components = 0.0567254 Jy ! Clean residual min=-0.008943 max=0.009005 Jy/beam ! Clean residual mean=-0.000058 rms=0.003110 Jy/beam ! Combined flux in latest and established models = 0.0567254 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 85 model components to the UV plane model. ! The established model now contains 85 components and 0.0567254 Jy ! Inverting map and beam ! Estimated beam: bmin=21.91 mas, bmaj=47.59 mas, bpa=7.806 degrees ! Estimated noise=12.6589 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350336 Jy ! Component: 100 - total flux cleaned = 0.00421465 Jy ! Component: 150 - total flux cleaned = 0.00352571 Jy ! Component: 200 - total flux cleaned = 0.00249611 Jy ! Total flux subtracted in 200 components = 0.00249611 Jy ! Clean residual min=-0.002115 max=0.002126 Jy/beam ! Clean residual mean=-0.000016 rms=0.000855 Jy/beam ! Combined flux in latest and established models = 0.0592215 Jy ! Adding 118 model components to the UV plane model. ! The established model now contains 203 components and 0.0592215 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=22.2 mas, bmaj=47.51 mas, bpa=7.751 degrees ! Estimated noise=12.6472 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000505974 Jy ! Component: 100 - total flux cleaned = -0.00023612 Jy ! Component: 150 - total flux cleaned = 1.87757e-05 Jy ! Component: 200 - total flux cleaned = 1.84511e-05 Jy ! Total flux subtracted in 200 components = 1.84511e-05 Jy ! Clean residual min=-0.000863 max=0.000880 Jy/beam ! Clean residual mean=-0.000004 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0592399 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109031 Jy ! Component: 100 - total flux cleaned = 0.000284673 Jy ! Component: 150 - total flux cleaned = 0.000410976 Jy ! Component: 200 - total flux cleaned = 0.000545643 Jy ! Total flux subtracted in 200 components = 0.000545643 Jy ! Clean residual min=-0.001163 max=0.001166 Jy/beam ! Clean residual mean=0.000006 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.0597856 Jy ! Adding 119 model components to the UV plane model. ! The established model now contains 321 components and 0.0597856 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=21.91 mas, bmaj=47.59 mas, bpa=7.806 degrees ! Estimated noise=12.6589 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000883075 Jy ! Component: 100 - total flux cleaned = -0.00120037 Jy ! Component: 150 - total flux cleaned = -0.00146323 Jy ! Component: 200 - total flux cleaned = -0.00152077 Jy ! Total flux subtracted in 200 components = -0.00152077 Jy ! Clean residual min=-0.000481 max=0.000477 Jy/beam ! Clean residual mean=-0.000005 rms=0.000194 Jy/beam ! Combined flux in latest and established models = 0.0582648 Jy selfcal ! Performing phase self-cal ! Adding 101 model components to the UV plane model. ! The established model now contains 420 components and 0.0582648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045226Jy sigma=0.081216 ! Fit after self-cal, rms=0.045186Jy sigma=0.081133 wmodel /g0/scr/pima/npcsb_uvs/J0525+8737_S_map.mod ! Writing 420 model components to file: /g0/scr/pima/npcsb_uvs/J0525+8737_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J0525+8737_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0525+8737_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0525+8737_S_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: /home/lpetrov/bin/01_muppet] ! wmap "/g0/scr/pima/npcsb_uvs/J0525+8737_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 21.91 x 47.59 at 7.806 degrees (North through East) ! Clean map min=-0.012502 max=0.043581 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0525+8737_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0435814 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000182173 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.25402 1.25402 2.50803 5.01607 10.0321 20.0643 40.1286 80.2571 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0525+8737_S_uvs.log closed on Sat Oct 5 18:57:01 2013