! Started logfile: /g0/scr/pima/npcsb_uvs/J0458+7615_S_uvs.log on Sat Oct  5 18:56:51 2013
obs /g0/scr/pima/npcsb_uvs/J0458+7615_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0458+7615_S_uva.fits
! AN table 1: 46 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.733333 visibilities/baseline/integration-bin.
! Found source: J0458+7615
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2024 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0458+7615_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005739Jy  sigma=0.775479
! Fit after  self-cal, rms=0.948589Jy  sigma=0.697822
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.04 mas, bmaj=39.05 mas, bpa=28.64 degrees
! Estimated noise=35.7577 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0652233 Jy
! Component: 100  -  total flux cleaned = 0.0824662 Jy
! Total flux subtracted in 100 components = 0.0824662 Jy
! Clean residual min=-0.009390 max=0.009466 Jy/beam
! Clean residual mean=-0.000007 rms=0.004309 Jy/beam
! Combined flux in latest and established models = 0.0824663 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.0824663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078540Jy  sigma=0.064552
! Fit after  self-cal, rms=0.077258Jy  sigma=0.063740
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.65 mas, bmaj=39.8 mas, bpa=26.83 degrees
! Estimated noise=24.0679 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00766022 Jy
! Component: 100  -  total flux cleaned = 0.0091226 Jy
! Component: 150  -  total flux cleaned = 0.0111688 Jy
! Component: 200  -  total flux cleaned = 0.0129085 Jy
! Total flux subtracted in 200 components = 0.0129085 Jy
! Clean residual min=-0.002346 max=0.002342 Jy/beam
! Clean residual mean=-0.000007 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 0.0953747 Jy
! Performing phase self-cal
! Adding 95 model components to the UV plane model.
! The established model now contains 118 components and 0.0953747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077721Jy  sigma=0.060439
! Fit after  self-cal, rms=0.077355Jy  sigma=0.060260
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.71     KP        0.82     LA        1.05     
!   OV        0.95     PT        1.10     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.94     KP        0.92     LA        1.02     
!   OV        0.85     PT        0.83     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.87     KP        0.88     LA        0.92     
!   OV        1.06     PT        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.90     KP        0.91     LA        0.70     
!   OV        0.82     PT        0.84     
! 
! 
! Fit before self-cal, rms=0.077355Jy  sigma=0.060260
! Fit after  self-cal, rms=0.067393Jy  sigma=0.056348
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.6 mas, bmaj=39.73 mas, bpa=26.81 degrees
! Estimated noise=19.045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0119312 Jy
! Component: 100  -  total flux cleaned = -0.0117827 Jy
! Component: 150  -  total flux cleaned = -0.0113231 Jy
! Component: 200  -  total flux cleaned = -0.0111051 Jy
! Total flux subtracted in 200 components = -0.0111051 Jy
! Clean residual min=-0.001124 max=0.001111 Jy/beam
! Clean residual mean=-0.000002 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0842696 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 166 components and 0.0842696 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061443Jy  sigma=0.057989
! Fit after  self-cal, rms=0.061454Jy  sigma=0.057823
! Inverting map 
! Added new window around map position (77, -110.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016563 Jy
! Component: 100  -  total flux cleaned = 0.00214054 Jy
! Component: 150  -  total flux cleaned = 0.00249098 Jy
! Component: 200  -  total flux cleaned = 0.00256202 Jy
! Total flux subtracted in 200 components = 0.00256202 Jy
! Clean residual min=-0.001266 max=0.001306 Jy/beam
! Clean residual mean=-0.000005 rms=0.000452 Jy/beam
! Combined flux in latest and established models = 0.0868316 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 216 components and 0.0868316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061270Jy  sigma=0.057899
! Fit after  self-cal, rms=0.061252Jy  sigma=0.057870
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061252Jy  sigma=0.057870
! Fit after  self-cal, rms=0.055875Jy  sigma=0.055955
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.5 mas, bmaj=39.6 mas, bpa=26.84 degrees
! Estimated noise=15.9953 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00698014 Jy
! Component: 100  -  total flux cleaned = -0.00805414 Jy
! Component: 150  -  total flux cleaned = -0.0093876 Jy
! Component: 200  -  total flux cleaned = -0.010337 Jy
! Total flux subtracted in 200 components = -0.010337 Jy
! Clean residual min=-0.004601 max=0.002547 Jy/beam
! Clean residual mean=0.000001 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.0764946 Jy
selfcal
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 280 components and 0.0764946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052954Jy  sigma=0.057040
! Fit after  self-cal, rms=0.052964Jy  sigma=0.056817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00196279 Jy
! Component: 100  -  total flux cleaned = -0.00214029 Jy
! Component: 150  -  total flux cleaned = -0.0022814 Jy
! Component: 200  -  total flux cleaned = -0.00252048 Jy
! Total flux subtracted in 200 components = -0.00252048 Jy
! Clean residual min=-0.002092 max=0.001493 Jy/beam
! Clean residual mean=-0.000002 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.0739742 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 323 components and 0.0739741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052239Jy  sigma=0.057328
! Fit after  self-cal, rms=0.052241Jy  sigma=0.057297
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052241Jy  sigma=0.057297
! Fit after  self-cal, rms=0.048185Jy  sigma=0.055824
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.52 mas, bmaj=39.26 mas, bpa=26.73 degrees
! Estimated noise=13.8125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00563128 Jy
! Component: 100  -  total flux cleaned = -0.00744211 Jy
! Component: 150  -  total flux cleaned = -0.00851856 Jy
! Component: 200  -  total flux cleaned = -0.00897335 Jy
! Total flux subtracted in 200 components = -0.00897335 Jy
! Clean residual min=-0.004378 max=0.002337 Jy/beam
! Clean residual mean=0.000002 rms=0.001048 Jy/beam
! Combined flux in latest and established models = 0.0650008 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 358 components and 0.0650008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046023Jy  sigma=0.056774
! Fit after  self-cal, rms=0.046006Jy  sigma=0.056572
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00157929 Jy
! Component: 100  -  total flux cleaned = -0.0014717 Jy
! Component: 150  -  total flux cleaned = -0.00151604 Jy
! Component: 200  -  total flux cleaned = -0.00166031 Jy
! Total flux subtracted in 200 components = -0.00166031 Jy
! Clean residual min=-0.002341 max=0.001717 Jy/beam
! Clean residual mean=-0.000001 rms=0.000645 Jy/beam
! Combined flux in latest and established models = 0.0633405 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 408 components and 0.0633404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045406Jy  sigma=0.057045
! Fit after  self-cal, rms=0.045405Jy  sigma=0.057007
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045405Jy  sigma=0.057007
! Fit after  self-cal, rms=0.042148Jy  sigma=0.055737
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.34 mas, bmaj=38.18 mas, bpa=26.3 degrees
! Estimated noise=12.1028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00461612 Jy
! Component: 100  -  total flux cleaned = -0.0064832 Jy
! Component: 150  -  total flux cleaned = -0.00722579 Jy
! Component: 200  -  total flux cleaned = -0.00744623 Jy
! Total flux subtracted in 200 components = -0.00744623 Jy
! Clean residual min=-0.004071 max=0.002285 Jy/beam
! Clean residual mean=0.000002 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.0558942 Jy
selfcal
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 448 components and 0.0558942 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040518Jy  sigma=0.056566
! Fit after  self-cal, rms=0.040511Jy  sigma=0.056386
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00106568 Jy
! Component: 100  -  total flux cleaned = -0.000924086 Jy
! Component: 150  -  total flux cleaned = -0.00100705 Jy
! Component: 200  -  total flux cleaned = -0.00114891 Jy
! Total flux subtracted in 200 components = -0.00114891 Jy
! Clean residual min=-0.002454 max=0.001794 Jy/beam
! Clean residual mean=-0.000001 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 0.0547453 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 506 components and 0.0547453 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040009Jy  sigma=0.056823
! Fit after  self-cal, rms=0.040016Jy  sigma=0.056782
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.63 mas, bmaj=38.8 mas, bpa=26.55 degrees
! Estimated noise=12.0817 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.63 x 38.8 at 26.55 degrees (North through East)
! Clean map  min=-0.025538  max=0.053696 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.93 mas, bmaj=37.64 mas, bpa=28.16 degrees
! Estimated noise=17.7179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175843 Jy
! Component: 100  -  total flux cleaned = 0.0230389 Jy
! Component: 150  -  total flux cleaned = 0.0259054 Jy
! Component: 200  -  total flux cleaned = 0.0297746 Jy
! Total flux subtracted in 200 components = 0.0297746 Jy
! Clean residual min=-0.012632 max=0.018916 Jy/beam
! Clean residual mean=-0.000012 rms=0.005253 Jy/beam
! Combined flux in latest and established models = 0.0297746 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 74 model components to the UV plane model.
! The established model now contains 74 components and 0.0297746 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.63 mas, bmaj=38.8 mas, bpa=26.55 degrees
! Estimated noise=12.0817 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00537325 Jy
! Component: 100  -  total flux cleaned = 0.0106182 Jy
! Component: 150  -  total flux cleaned = 0.0151514 Jy
! Component: 200  -  total flux cleaned = 0.0190833 Jy
! Total flux subtracted in 200 components = 0.0190833 Jy
! Clean residual min=-0.010930 max=0.018369 Jy/beam
! Clean residual mean=-0.000007 rms=0.003967 Jy/beam
! Combined flux in latest and established models = 0.0488579 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 145 components and 0.0488579 Jy
! Inverting map 
! Added new window around map position (-47, 101.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0116287 Jy
! Component: 100  -  total flux cleaned = 0.0163165 Jy
! Component: 150  -  total flux cleaned = 0.0185059 Jy
! Component: 200  -  total flux cleaned = 0.0196373 Jy
! Total flux subtracted in 200 components = 0.0196373 Jy
! Clean residual min=-0.005207 max=0.004146 Jy/beam
! Clean residual mean=-0.000015 rms=0.001478 Jy/beam
! Combined flux in latest and established models = 0.0684952 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 206 components and 0.0684952 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.34 mas, bmaj=38.18 mas, bpa=26.3 degrees
! Estimated noise=12.1028 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000300898 Jy
! Component: 100  -  total flux cleaned = 0.000733233 Jy
! Component: 150  -  total flux cleaned = 0.00137536 Jy
! Component: 200  -  total flux cleaned = 0.00196376 Jy
! Total flux subtracted in 200 components = 0.00196376 Jy
! Clean residual min=-0.003775 max=0.002975 Jy/beam
! Clean residual mean=-0.000005 rms=0.001052 Jy/beam
! Combined flux in latest and established models = 0.0704589 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326344 Jy
! Component: 100  -  total flux cleaned = 0.000838776 Jy
! Component: 150  -  total flux cleaned = 0.00113355 Jy
! Component: 200  -  total flux cleaned = 0.00141914 Jy
! Total flux subtracted in 200 components = 0.00141914 Jy
! Clean residual min=-0.004106 max=0.003253 Jy/beam
! Clean residual mean=-0.000001 rms=0.000923 Jy/beam
! Combined flux in latest and established models = 0.0718781 Jy
! Adding 110 model components to the UV plane model.
! The established model now contains 308 components and 0.071878 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.63 mas, bmaj=38.8 mas, bpa=26.55 degrees
! Estimated noise=12.0817 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000344557 Jy
! Component: 100  -  total flux cleaned = -0.000265681 Jy
! Component: 150  -  total flux cleaned = -0.000340496 Jy
! Component: 200  -  total flux cleaned = -0.000203696 Jy
! Total flux subtracted in 200 components = -0.000203696 Jy
! Clean residual min=-0.002742 max=0.002263 Jy/beam
! Clean residual mean=-0.000004 rms=0.000709 Jy/beam
! Combined flux in latest and established models = 0.0716743 Jy
selfcal
! Performing phase self-cal
! Adding 56 model components to the UV plane model.
! The established model now contains 349 components and 0.0716744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039569Jy  sigma=0.060186
! Fit after  self-cal, rms=0.039038Jy  sigma=0.058765
wmodel /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.mod
! Writing 349 model components to file: /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0458+7615_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0458+7615_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000497436 Jy
! Component: 100  -  total flux cleaned = -0.000591232 Jy
! Component: 150  -  total flux cleaned = -0.000499246 Jy
! Component: 200  -  total flux cleaned = -0.000364653 Jy
! Component: 250  -  total flux cleaned = -0.000286202 Jy
! Component: 300  -  total flux cleaned = -0.000156551 Jy
! Component: 350  -  total flux cleaned = -6.22962e-05 Jy
! Component: 400  -  total flux cleaned = 5.36818e-05 Jy
! Component: 450  -  total flux cleaned = 9.10278e-05 Jy
! Component: 500  -  total flux cleaned = 0.000151501 Jy
! Component: 550  -  total flux cleaned = 0.000198615 Jy
! Component: 600  -  total flux cleaned = 0.000187484 Jy
! Component: 650  -  total flux cleaned = 0.000153396 Jy
! Component: 700  -  total flux cleaned = 9.72581e-05 Jy
! Component: 750  -  total flux cleaned = 5.28888e-05 Jy
! Component: 800  -  total flux cleaned = 8.8997e-06 Jy
! Component: 850  -  total flux cleaned = -4.56399e-05 Jy
! Component: 900  -  total flux cleaned = -9.9985e-05 Jy
! Component: 950  -  total flux cleaned = -0.000121585 Jy
! Component: 1000  -  total flux cleaned = -0.000154064 Jy
! Component: 1050  -  total flux cleaned = -0.000175854 Jy
! Component: 1100  -  total flux cleaned = -0.000186678 Jy
! Component: 1150  -  total flux cleaned = -0.000263277 Jy
! Component: 1200  -  total flux cleaned = -0.000329561 Jy
! Component: 1250  -  total flux cleaned = -0.000419008 Jy
! Component: 1300  -  total flux cleaned = -0.000498287 Jy
! Component: 1350  -  total flux cleaned = -0.000578043 Jy
! Component: 1400  -  total flux cleaned = -0.000635769 Jy
! Component: 1450  -  total flux cleaned = -0.000694358 Jy
! Component: 1500  -  total flux cleaned = -0.000753728 Jy
! Component: 1550  -  total flux cleaned = -0.000826174 Jy
! Component: 1600  -  total flux cleaned = -0.000875228 Jy
! Component: 1650  -  total flux cleaned = -0.000937587 Jy
! Component: 1700  -  total flux cleaned = -0.000988018 Jy
! Component: 1750  -  total flux cleaned = -0.00105202 Jy
! Component: 1800  -  total flux cleaned = -0.00109081 Jy
! Component: 1850  -  total flux cleaned = -0.00114359 Jy
! Component: 1900  -  total flux cleaned = -0.00119702 Jy
! Component: 1950  -  total flux cleaned = -0.00125141 Jy
! Component: 2000  -  total flux cleaned = -0.00127907 Jy
! Component: 2050  -  total flux cleaned = -0.00130704 Jy
! Component: 2100  -  total flux cleaned = -0.00134951 Jy
! Component: 2150  -  total flux cleaned = -0.00139286 Jy
! Component: 2200  -  total flux cleaned = -0.0014517 Jy
! Component: 2250  -  total flux cleaned = -0.00149645 Jy
! Component: 2300  -  total flux cleaned = -0.00152675 Jy
! Component: 2350  -  total flux cleaned = -0.00151134 Jy
! Component: 2400  -  total flux cleaned = -0.00149515 Jy
! Component: 2450  -  total flux cleaned = -0.00146276 Jy
! Component: 2500  -  total flux cleaned = -0.00146269 Jy
! Component: 2550  -  total flux cleaned = -0.00141214 Jy
! Component: 2600  -  total flux cleaned = -0.00139488 Jy
! Component: 2650  -  total flux cleaned = -0.00134232 Jy
! Component: 2700  -  total flux cleaned = -0.00127043 Jy
! Component: 2750  -  total flux cleaned = -0.0012152 Jy
! Component: 2800  -  total flux cleaned = -0.00115873 Jy
! Component: 2850  -  total flux cleaned = -0.00108109 Jy
! Component: 2900  -  total flux cleaned = -0.00100144 Jy
! Component: 2950  -  total flux cleaned = -0.000919742 Jy
! Component: 3000  -  total flux cleaned = -0.000856474 Jy
! Component: 3050  -  total flux cleaned = -0.000770493 Jy
! Component: 3100  -  total flux cleaned = -0.00070435 Jy
! Component: 3150  -  total flux cleaned = -0.000591114 Jy
! Component: 3200  -  total flux cleaned = -0.000521177 Jy
! Component: 3250  -  total flux cleaned = -0.000449752 Jy
! Component: 3300  -  total flux cleaned = -0.000327202 Jy
! Component: 3350  -  total flux cleaned = -0.000225964 Jy
! Component: 3400  -  total flux cleaned = -9.5914e-05 Jy
! Component: 3450  -  total flux cleaned = 1.09465e-05 Jy
! Component: 3500  -  total flux cleaned = 0.000148283 Jy
! Component: 3550  -  total flux cleaned = 0.000260984 Jy
! Component: 3600  -  total flux cleaned = 0.000435177 Jy
! Component: 3650  -  total flux cleaned = 0.000554656 Jy
! Component: 3700  -  total flux cleaned = 0.000678164 Jy
! Component: 3750  -  total flux cleaned = 0.000805215 Jy
! Component: 3800  -  total flux cleaned = 0.000935364 Jy
! Component: 3850  -  total flux cleaned = 0.00106984 Jy
! Component: 3900  -  total flux cleaned = 0.00117301 Jy
! Component: 3950  -  total flux cleaned = 0.00131473 Jy
! Component: 4000  -  total flux cleaned = 0.00146129 Jy
! Component: 4050  -  total flux cleaned = 0.0015743 Jy
! Total flux subtracted in 4096 components = 0.00172903 Jy
! Clean residual min=-0.002298 max=0.002156 Jy/beam
! Clean residual mean=-0.000021 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.0734034 Jy
keep
! Adding 237 model components to the UV plane model.
! The established model now contains 586 components and 0.0734034 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0458+7615_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.63 x 38.8 at 26.55 degrees (North through East)
! Clean map  min=-0.0071446  max=0.021002 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0458+7615_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0210018 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000736062 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -10.5143 10.5143 21.0285 42.0571 84.1142
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0022 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.021 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0458+7615_S_uvs.log closed on Sat Oct  5 18:56:56 2013