! Started logfile: /g0/scr/pima/npcsb_uvs/J0445+7838_X_uvs.log on Sat Oct 5 18:51:33 2013 obs /g0/scr/pima/npcsb_uvs/J0445+7838_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_X_uva.fits ! AN table 1: 46 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.733333 visibilities/baseline/integration-bin. ! Found source: J0445+7838 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2024 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0445+7838_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.003861Jy sigma=0.765586 ! Fit after self-cal, rms=0.948373Jy sigma=0.689569 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.263 mas, bmaj=5.713 mas, bpa=54.2 degrees ! Estimated noise=38.8007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0611322 Jy ! Component: 100 - total flux cleaned = 0.0772511 Jy ! Total flux subtracted in 100 components = 0.0772511 Jy ! Clean residual min=-0.006131 max=0.007240 Jy/beam ! Clean residual mean=0.000014 rms=0.002628 Jy/beam ! Combined flux in latest and established models = 0.0772511 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0772511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067509Jy sigma=0.053920 ! Fit after self-cal, rms=0.065741Jy sigma=0.052908 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.507 mas, bmaj=6.173 mas, bpa=50.41 degrees ! Estimated noise=23.2718 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525771 Jy ! Component: 100 - total flux cleaned = 0.00588217 Jy ! Component: 150 - total flux cleaned = 0.00487759 Jy ! Component: 200 - total flux cleaned = 0.00442915 Jy ! Total flux subtracted in 200 components = 0.00442915 Jy ! Clean residual min=-0.002333 max=0.002327 Jy/beam ! Clean residual mean=-0.000002 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.0816803 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 66 components and 0.0816803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066832Jy sigma=0.050489 ! Fit after self-cal, rms=0.066611Jy sigma=0.050371 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.85 KP 0.87 LA 0.94 ! OV 0.95 PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 KP 0.94 LA 0.81 ! OV 0.90 PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.81 KP 0.83 LA 1.00 ! OV 0.85 PT 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.05 KP 0.86 LA 0.81 ! OV 0.92 PT 0.92 ! ! ! Fit before self-cal, rms=0.066611Jy sigma=0.050371 ! Fit after self-cal, rms=0.059361Jy sigma=0.046840 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=6.129 mas, bpa=51.35 degrees ! Estimated noise=18.3386 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0115585 Jy ! Component: 100 - total flux cleaned = -0.0127278 Jy ! Component: 150 - total flux cleaned = -0.012561 Jy ! Component: 200 - total flux cleaned = -0.0120111 Jy ! Total flux subtracted in 200 components = -0.0120111 Jy ! Clean residual min=-0.001060 max=0.001062 Jy/beam ! Clean residual mean=-0.000000 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0696691 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 92 components and 0.0696692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053036Jy sigma=0.048539 ! Fit after self-cal, rms=0.053017Jy sigma=0.048472 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053017Jy sigma=0.048472 ! Fit after self-cal, rms=0.048593Jy sigma=0.046557 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.495 mas, bmaj=6.144 mas, bpa=51.3 degrees ! Estimated noise=15.0434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00941163 Jy ! Component: 100 - total flux cleaned = -0.0112831 Jy ! Component: 150 - total flux cleaned = -0.0109552 Jy ! Component: 200 - total flux cleaned = -0.0105085 Jy ! Total flux subtracted in 200 components = -0.0105085 Jy ! Clean residual min=-0.000683 max=0.000687 Jy/beam ! Clean residual mean=0.000001 rms=0.000235 Jy/beam ! Combined flux in latest and established models = 0.0591607 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 113 components and 0.0591607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043455Jy sigma=0.048350 ! Fit after self-cal, rms=0.043442Jy sigma=0.048326 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275096 Jy ! Component: 100 - total flux cleaned = 0.000471002 Jy ! Component: 150 - total flux cleaned = 0.000507225 Jy ! Component: 200 - total flux cleaned = 0.000345488 Jy ! Total flux subtracted in 200 components = 0.000345488 Jy ! Clean residual min=-0.000531 max=0.000530 Jy/beam ! Clean residual mean=0.000001 rms=0.000182 Jy/beam ! Combined flux in latest and established models = 0.0595061 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 156 components and 0.0595061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043303Jy sigma=0.048349 ! Fit after self-cal, rms=0.043286Jy sigma=0.048337 ! Inverting map ! Added new window around map position (28.8, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497193 Jy ! Component: 100 - total flux cleaned = 0.000475182 Jy ! Component: 150 - total flux cleaned = 0.00063472 Jy ! Component: 200 - total flux cleaned = 0.00075992 Jy ! Total flux subtracted in 200 components = 0.00075992 Jy ! Clean residual min=-0.000705 max=0.000666 Jy/beam ! Clean residual mean=0.000001 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.0602661 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 178 components and 0.0602661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043230Jy sigma=0.048366 ! Fit after self-cal, rms=0.043233Jy sigma=0.048359 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043233Jy sigma=0.048359 ! Fit after self-cal, rms=0.039477Jy sigma=0.046255 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=6.159 mas, bpa=51.24 degrees ! Estimated noise=12.3253 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256686 Jy ! Component: 100 - total flux cleaned = 0.0044982 Jy ! Component: 150 - total flux cleaned = 0.00593914 Jy ! Component: 200 - total flux cleaned = 0.00675521 Jy ! Total flux subtracted in 200 components = 0.00675521 Jy ! Clean residual min=-0.006693 max=0.003277 Jy/beam ! Clean residual mean=0.000016 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.0670213 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 211 components and 0.0670213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038258Jy sigma=0.046600 ! Fit after self-cal, rms=0.038277Jy sigma=0.046472 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167119 Jy ! Component: 100 - total flux cleaned = 0.00277928 Jy ! Component: 150 - total flux cleaned = 0.00350416 Jy ! Component: 200 - total flux cleaned = 0.00413856 Jy ! Total flux subtracted in 200 components = 0.00413856 Jy ! Clean residual min=-0.005288 max=0.002742 Jy/beam ! Clean residual mean=0.000013 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.0711599 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 224 components and 0.0711598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037661Jy sigma=0.046783 ! Fit after self-cal, rms=0.037655Jy sigma=0.046740 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037655Jy sigma=0.046740 ! Fit after self-cal, rms=0.036558Jy sigma=0.046235 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.751 mas, bmaj=6.368 mas, bpa=48.48 degrees ! Estimated noise=11.5723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161212 Jy ! Component: 100 - total flux cleaned = 0.00282567 Jy ! Component: 150 - total flux cleaned = 0.003727 Jy ! Component: 200 - total flux cleaned = 0.00459267 Jy ! Total flux subtracted in 200 components = 0.00459267 Jy ! Clean residual min=-0.006740 max=0.003561 Jy/beam ! Clean residual mean=0.000018 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.0757525 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 233 components and 0.0757525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035741Jy sigma=0.046483 ! Fit after self-cal, rms=0.035718Jy sigma=0.046410 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155898 Jy ! Component: 100 - total flux cleaned = 0.00238118 Jy ! Component: 150 - total flux cleaned = 0.00311251 Jy ! Component: 200 - total flux cleaned = 0.00376446 Jy ! Total flux subtracted in 200 components = 0.00376446 Jy ! Clean residual min=-0.005650 max=0.003160 Jy/beam ! Clean residual mean=0.000015 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 0.079517 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 241 components and 0.0795169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.035230Jy sigma=0.046642 ! Fit after self-cal, rms=0.035212Jy sigma=0.046606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=6.153 mas, bpa=51.23 degrees ! Estimated noise=11.3804 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.502 x 6.153 at 51.23 degrees (North through East) ! Clean map min=-0.005017 max=0.039994 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.256 mas, bmaj=5.72 mas, bpa=54.97 degrees ! Estimated noise=19.2099 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.012897 Jy ! Component: 100 - total flux cleaned = -0.0173336 Jy ! Component: 150 - total flux cleaned = -0.0230311 Jy ! Component: 200 - total flux cleaned = -0.0252161 Jy ! Total flux subtracted in 200 components = -0.0252161 Jy ! Clean residual min=-0.015463 max=0.024002 Jy/beam ! Clean residual mean=-0.000023 rms=0.004622 Jy/beam ! Combined flux in latest and established models = -0.0252161 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and -0.0252161 Jy ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=6.153 mas, bpa=51.23 degrees ! Estimated noise=11.3804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.2, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021939 Jy ! Component: 100 - total flux cleaned = 0.0319114 Jy ! Component: 150 - total flux cleaned = 0.0368212 Jy ! Component: 200 - total flux cleaned = 0.0380375 Jy ! Total flux subtracted in 200 components = 0.0380375 Jy ! Clean residual min=-0.006581 max=0.006597 Jy/beam ! Clean residual mean=0.000005 rms=0.001730 Jy/beam ! Combined flux in latest and established models = 0.0128214 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 0.0128214 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.751 mas, bmaj=6.368 mas, bpa=48.48 degrees ! Estimated noise=11.5723 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144441 Jy ! Component: 100 - total flux cleaned = 0.00294756 Jy ! Component: 150 - total flux cleaned = 0.00417909 Jy ! Component: 200 - total flux cleaned = 0.00517759 Jy ! Total flux subtracted in 200 components = 0.00517759 Jy ! Clean residual min=-0.004622 max=0.004854 Jy/beam ! Clean residual mean=0.000005 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.017999 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809862 Jy ! Component: 100 - total flux cleaned = 0.00162283 Jy ! Component: 150 - total flux cleaned = 0.00242657 Jy ! Component: 200 - total flux cleaned = 0.00310084 Jy ! Total flux subtracted in 200 components = 0.00310084 Jy ! Clean residual min=-0.003923 max=0.004446 Jy/beam ! Clean residual mean=0.000005 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.0210998 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 87 components and 0.0210998 Jy ! Inverting map ! Added new window around map position (-51, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285602 Jy ! Component: 100 - total flux cleaned = 0.00276915 Jy ! Component: 150 - total flux cleaned = 0.00261362 Jy ! Component: 200 - total flux cleaned = 0.00281537 Jy ! Total flux subtracted in 200 components = 0.00281537 Jy ! Clean residual min=-0.002856 max=0.003293 Jy/beam ! Clean residual mean=-0.000005 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.0239152 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 0.0239152 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=6.153 mas, bpa=51.23 degrees ! Estimated noise=11.3804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366944 Jy ! Component: 100 - total flux cleaned = 0.000632449 Jy ! Component: 150 - total flux cleaned = 0.000872705 Jy ! Component: 200 - total flux cleaned = 0.00118634 Jy ! Total flux subtracted in 200 components = 0.00118634 Jy ! Clean residual min=-0.003266 max=0.003015 Jy/beam ! Clean residual mean=-0.000003 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0251015 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 130 components and 0.0251015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032965Jy sigma=0.049904 ! Fit after self-cal, rms=0.032710Jy sigma=0.049296 wmodel /g0/scr/pima/npcsb_uvs/J0445+7838_X_map.mod ! Writing 130 model components to file: /g0/scr/pima/npcsb_uvs/J0445+7838_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0445+7838_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0445+7838_X_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0445+7838_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000587057 Jy ! Component: 100 - total flux cleaned = -0.000441666 Jy ! Component: 150 - total flux cleaned = -0.000192554 Jy ! Component: 200 - total flux cleaned = 2.34447e-05 Jy ! Component: 250 - total flux cleaned = 0.000160159 Jy ! Component: 300 - total flux cleaned = 0.000242107 Jy ! Component: 350 - total flux cleaned = 0.000321753 Jy ! Component: 400 - total flux cleaned = 0.000429979 Jy ! Component: 450 - total flux cleaned = 0.00053509 Jy ! Component: 500 - total flux cleaned = 0.000608104 Jy ! Component: 550 - total flux cleaned = 0.000665384 Jy ! Component: 600 - total flux cleaned = 0.000721357 Jy ! Component: 650 - total flux cleaned = 0.000816932 Jy ! Component: 700 - total flux cleaned = 0.000896854 Jy ! Component: 750 - total flux cleaned = 0.000936325 Jy ! Component: 800 - total flux cleaned = 0.000987763 Jy ! Component: 850 - total flux cleaned = 0.00100024 Jy ! Component: 900 - total flux cleaned = 0.0010252 Jy ! Component: 950 - total flux cleaned = 0.00106202 Jy ! Component: 1000 - total flux cleaned = 0.00107413 Jy ! Component: 1050 - total flux cleaned = 0.00109814 Jy ! Component: 1100 - total flux cleaned = 0.00108627 Jy ! Component: 1150 - total flux cleaned = 0.00108616 Jy ! Component: 1200 - total flux cleaned = 0.00105153 Jy ! Component: 1250 - total flux cleaned = 0.00104001 Jy ! Component: 1300 - total flux cleaned = 0.00102855 Jy ! Component: 1350 - total flux cleaned = 0.000994352 Jy ! Component: 1400 - total flux cleaned = 0.000994309 Jy ! Component: 1450 - total flux cleaned = 0.000982941 Jy ! Component: 1500 - total flux cleaned = 0.000971527 Jy ! Component: 1550 - total flux cleaned = 0.000960224 Jy ! Component: 1600 - total flux cleaned = 0.000937465 Jy ! Component: 1650 - total flux cleaned = 0.000914856 Jy ! Component: 1700 - total flux cleaned = 0.000903577 Jy ! Component: 1750 - total flux cleaned = 0.000880864 Jy ! Component: 1800 - total flux cleaned = 0.00085824 Jy ! Component: 1850 - total flux cleaned = 0.000835513 Jy ! Component: 1900 - total flux cleaned = 0.000835492 Jy ! Component: 1950 - total flux cleaned = 0.00079005 Jy ! Component: 2000 - total flux cleaned = 0.000721588 Jy ! Component: 2050 - total flux cleaned = 0.000664397 Jy ! Component: 2100 - total flux cleaned = 0.000595344 Jy ! Component: 2150 - total flux cleaned = 0.000537587 Jy ! Component: 2200 - total flux cleaned = 0.000514331 Jy ! Component: 2250 - total flux cleaned = 0.000455809 Jy ! Component: 2300 - total flux cleaned = 0.000408716 Jy ! Component: 2350 - total flux cleaned = 0.000385068 Jy ! Component: 2400 - total flux cleaned = 0.000337117 Jy ! Component: 2450 - total flux cleaned = 0.000324997 Jy ! Component: 2500 - total flux cleaned = 0.000300558 Jy ! Component: 2550 - total flux cleaned = 0.000275783 Jy ! Component: 2600 - total flux cleaned = 0.000250868 Jy ! Component: 2650 - total flux cleaned = 0.00022568 Jy ! Component: 2700 - total flux cleaned = 0.00018739 Jy ! Component: 2750 - total flux cleaned = 0.000174415 Jy ! Component: 2800 - total flux cleaned = 0.000148403 Jy ! Component: 2850 - total flux cleaned = 0.000121991 Jy ! Component: 2900 - total flux cleaned = 0.00010873 Jy ! Component: 2950 - total flux cleaned = 8.16416e-05 Jy ! Component: 3000 - total flux cleaned = 0.000108909 Jy ! Component: 3050 - total flux cleaned = 0.000108963 Jy ! Component: 3100 - total flux cleaned = 0.000122968 Jy ! Component: 3150 - total flux cleaned = 0.00015163 Jy ! Component: 3200 - total flux cleaned = 0.000151723 Jy ! Component: 3250 - total flux cleaned = 0.000137196 Jy ! Component: 3300 - total flux cleaned = 0.000151755 Jy ! Component: 3350 - total flux cleaned = 0.000181693 Jy ! Component: 3400 - total flux cleaned = 0.00018173 Jy ! Component: 3450 - total flux cleaned = 0.000181833 Jy ! Component: 3500 - total flux cleaned = 0.000212877 Jy ! Component: 3550 - total flux cleaned = 0.000213022 Jy ! Component: 3600 - total flux cleaned = 0.000196932 Jy ! Component: 3650 - total flux cleaned = 0.000229159 Jy ! Component: 3700 - total flux cleaned = 0.000196239 Jy ! Component: 3750 - total flux cleaned = 0.000229606 Jy ! Component: 3800 - total flux cleaned = 0.000246608 Jy ! Component: 3850 - total flux cleaned = 0.000298436 Jy ! Component: 3900 - total flux cleaned = 0.00033326 Jy ! Component: 3950 - total flux cleaned = 0.000386022 Jy ! Component: 4000 - total flux cleaned = 0.000457546 Jy ! Component: 4050 - total flux cleaned = 0.000511951 Jy ! Total flux subtracted in 4096 components = 0.000567139 Jy ! Clean residual min=-0.001112 max=0.001505 Jy/beam ! Clean residual mean=0.000007 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 0.0256687 Jy keep ! Adding 198 model components to the UV plane model. ! The established model now contains 328 components and 0.0256687 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0445+7838_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.502 x 6.153 at 51.23 degrees (North through East) ! Clean map min=-0.005284 max=0.032494 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0324935 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349356 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.22546 3.22546 6.45093 12.9019 25.8037 51.6074 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.032 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0445+7838_X_uvs.log closed on Sat Oct 5 18:51:37 2013