! Started logfile: /g0/scr/pima/npcsb_uvs/J0445+7838_S_uvs.log on Sat Oct  5 18:56:41 2013
obs /g0/scr/pima/npcsb_uvs/J0445+7838_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_S_uva.fits
! AN table 1: 46 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.857143 visibilities/baseline/integration-bin.
! Found source: J0445+7838
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3312 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0445+7838_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.002863Jy  sigma=0.767099
! Fit after  self-cal, rms=0.951802Jy  sigma=0.689413
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.286 mas, bmaj=12.54 mas, bpa=17.31 degrees
! Estimated noise=38.5753 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0594073 Jy
! Component: 100  -  total flux cleaned = 0.0759788 Jy
! Total flux subtracted in 100 components = 0.0759788 Jy
! Clean residual min=-0.010492 max=0.009683 Jy/beam
! Clean residual mean=-0.000002 rms=0.003528 Jy/beam
! Combined flux in latest and established models = 0.0759788 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0759788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079228Jy  sigma=0.066003
! Fit after  self-cal, rms=0.077911Jy  sigma=0.064902
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.663 mas, bmaj=14.23 mas, bpa=20.81 degrees
! Estimated noise=18.2196 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695069 Jy
! Component: 100  -  total flux cleaned = 0.00856346 Jy
! Component: 150  -  total flux cleaned = 0.00893509 Jy
! Component: 200  -  total flux cleaned = 0.00933368 Jy
! Total flux subtracted in 200 components = 0.00933368 Jy
! Clean residual min=-0.005750 max=0.005526 Jy/beam
! Clean residual mean=-0.000002 rms=0.001555 Jy/beam
! Combined flux in latest and established models = 0.0853125 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 25 components and 0.0853125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079232Jy  sigma=0.063164
! Fit after  self-cal, rms=0.079202Jy  sigma=0.063114
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.93     KP        0.87     LA        0.97     
!   MK        0.80     OV        0.94     PT        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.87     KP        0.89     LA        0.99     
!   MK        0.85     OV        1.08     PT        0.82     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.90     KP        0.89     LA        0.73     
!   MK        0.87     OV        0.99     PT        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.74     FD        0.79     KP        0.83     LA        0.61     
!   MK        0.82     OV        0.82     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.079202Jy  sigma=0.063114
! Fit after  self-cal, rms=0.067888Jy  sigma=0.058515
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.491 mas, bmaj=14.17 mas, bpa=20.43 degrees
! Estimated noise=14.0582 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0128447 Jy
! Component: 100  -  total flux cleaned = -0.0158443 Jy
! Component: 150  -  total flux cleaned = -0.016724 Jy
! Component: 200  -  total flux cleaned = -0.0169162 Jy
! Total flux subtracted in 200 components = -0.0169162 Jy
! Clean residual min=-0.002437 max=0.002248 Jy/beam
! Clean residual mean=0.000000 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.0683963 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 35 components and 0.0683963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061126Jy  sigma=0.060707
! Fit after  self-cal, rms=0.061264Jy  sigma=0.060592
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061264Jy  sigma=0.060592
! Fit after  self-cal, rms=0.053938Jy  sigma=0.058347
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.504 mas, bmaj=13.99 mas, bpa=20.53 degrees
! Estimated noise=11.0908 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0100847 Jy
! Component: 100  -  total flux cleaned = -0.0125061 Jy
! Component: 150  -  total flux cleaned = -0.0132817 Jy
! Component: 200  -  total flux cleaned = -0.0134081 Jy
! Total flux subtracted in 200 components = -0.0134081 Jy
! Clean residual min=-0.001893 max=0.001707 Jy/beam
! Clean residual mean=-0.000001 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.0549882 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 40 components and 0.0549882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048642Jy  sigma=0.060540
! Fit after  self-cal, rms=0.048663Jy  sigma=0.060531
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000120782 Jy
! Component: 100  -  total flux cleaned = -0.000228331 Jy
! Component: 150  -  total flux cleaned = -0.000316502 Jy
! Component: 200  -  total flux cleaned = -0.000368819 Jy
! Total flux subtracted in 200 components = -0.000368819 Jy
! Clean residual min=-0.001930 max=0.001721 Jy/beam
! Clean residual mean=-0.000001 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.0546193 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 51 components and 0.0546194 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048567Jy  sigma=0.060627
! Fit after  self-cal, rms=0.048564Jy  sigma=0.060626
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048564Jy  sigma=0.060626
! Fit after  self-cal, rms=0.042577Jy  sigma=0.058331
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.515 mas, bmaj=13.78 mas, bpa=20.6 degrees
! Estimated noise=8.74779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00768193 Jy
! Component: 100  -  total flux cleaned = -0.0095754 Jy
! Component: 150  -  total flux cleaned = -0.010235 Jy
! Component: 200  -  total flux cleaned = -0.0103471 Jy
! Total flux subtracted in 200 components = -0.0103471 Jy
! Clean residual min=-0.001527 max=0.001347 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.0442722 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.0442722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038561Jy  sigma=0.060524
! Fit after  self-cal, rms=0.038565Jy  sigma=0.060519
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.85098e-05 Jy
! Component: 100  -  total flux cleaned = -0.00016757 Jy
! Component: 150  -  total flux cleaned = -0.000233407 Jy
! Component: 200  -  total flux cleaned = -0.000279906 Jy
! Total flux subtracted in 200 components = -0.000279906 Jy
! Clean residual min=-0.001544 max=0.001334 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.0439923 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 58 components and 0.0439923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038491Jy  sigma=0.060611
! Fit after  self-cal, rms=0.038493Jy  sigma=0.060609
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038493Jy  sigma=0.060609
! Fit after  self-cal, rms=0.033770Jy  sigma=0.058316
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.644 mas, bmaj=17.81 mas, bpa=42.09 degrees
! Estimated noise=7.92042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00594419 Jy
! Component: 100  -  total flux cleaned = -0.00748053 Jy
! Component: 150  -  total flux cleaned = -0.0080718 Jy
! Component: 200  -  total flux cleaned = -0.00831757 Jy
! Total flux subtracted in 200 components = -0.00831757 Jy
! Clean residual min=-0.001139 max=0.001090 Jy/beam
! Clean residual mean=-0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.0356748 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 79 components and 0.0356748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.030634Jy  sigma=0.060432
! Fit after  self-cal, rms=0.030632Jy  sigma=0.060426
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.78573e-05 Jy
! Component: 100  -  total flux cleaned = -0.000115345 Jy
! Component: 150  -  total flux cleaned = -0.000139844 Jy
! Component: 200  -  total flux cleaned = -0.000148893 Jy
! Total flux subtracted in 200 components = -0.000148893 Jy
! Clean residual min=-0.001111 max=0.001075 Jy/beam
! Clean residual mean=-0.000001 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.0355259 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 87 components and 0.0355259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.030610Jy  sigma=0.060459
! Fit after  self-cal, rms=0.030609Jy  sigma=0.060459
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.527 mas, bmaj=13.59 mas, bpa=20.67 degrees
! Estimated noise=6.89729 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.527 x 13.59 at 20.67 degrees (North through East)
! Clean map  min=-0.0012093  max=0.028363 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.203 mas, bmaj=12.25 mas, bpa=17.01 degrees
! Estimated noise=13.916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219983 Jy
! Component: 100  -  total flux cleaned = 0.029258 Jy
! Component: 150  -  total flux cleaned = 0.0316995 Jy
! Component: 200  -  total flux cleaned = 0.0323859 Jy
! Total flux subtracted in 200 components = 0.0323859 Jy
! Clean residual min=-0.002273 max=0.002514 Jy/beam
! Clean residual mean=-0.000001 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.0323859 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0323859 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.527 mas, bmaj=13.59 mas, bpa=20.67 degrees
! Estimated noise=6.89729 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015611 Jy
! Component: 100  -  total flux cleaned = 0.00217684 Jy
! Component: 150  -  total flux cleaned = 0.00226847 Jy
! Component: 200  -  total flux cleaned = 0.00234581 Jy
! Total flux subtracted in 200 components = 0.00234581 Jy
! Clean residual min=-0.001284 max=0.001361 Jy/beam
! Clean residual mean=-0.000000 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.0347318 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 38 components and 0.0347318 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.644 mas, bmaj=17.81 mas, bpa=42.09 degrees
! Estimated noise=7.92042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.34436e-05 Jy
! Component: 100  -  total flux cleaned = 0.000228335 Jy
! Component: 150  -  total flux cleaned = 0.000324756 Jy
! Component: 200  -  total flux cleaned = 0.000421162 Jy
! Total flux subtracted in 200 components = 0.000421162 Jy
! Clean residual min=-0.001292 max=0.001274 Jy/beam
! Clean residual mean=-0.000000 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.0351529 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.905e-05 Jy
! Component: 100  -  total flux cleaned = 8.26129e-05 Jy
! Component: 150  -  total flux cleaned = 0.000113432 Jy
! Component: 200  -  total flux cleaned = 0.000141272 Jy
! Total flux subtracted in 200 components = 0.000141272 Jy
! Clean residual min=-0.001218 max=0.001246 Jy/beam
! Clean residual mean=-0.000000 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.0352942 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 54 components and 0.0352942 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.527 mas, bmaj=13.59 mas, bpa=20.67 degrees
! Estimated noise=6.89729 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.24638e-05 Jy
! Component: 100  -  total flux cleaned = -8.19289e-05 Jy
! Component: 150  -  total flux cleaned = -0.000110988 Jy
! Component: 200  -  total flux cleaned = -0.000126799 Jy
! Total flux subtracted in 200 components = -0.000126799 Jy
! Clean residual min=-0.001291 max=0.001269 Jy/beam
! Clean residual mean=-0.000000 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.0351674 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.0351674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.030497Jy  sigma=0.060717
! Fit after  self-cal, rms=0.030498Jy  sigma=0.060708
wmodel /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.mod
! Writing 75 model components to file: /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0445+7838_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000114297 Jy
! Component: 100  -  total flux cleaned = -4.09166e-05 Jy
! Component: 150  -  total flux cleaned = -0.000107086 Jy
! Component: 200  -  total flux cleaned = -0.000169612 Jy
! Component: 250  -  total flux cleaned = -0.000303182 Jy
! Component: 300  -  total flux cleaned = -0.000442525 Jy
! Component: 350  -  total flux cleaned = -0.000576051 Jy
! Component: 400  -  total flux cleaned = -0.00069228 Jy
! Component: 450  -  total flux cleaned = -0.000755101 Jy
! Component: 500  -  total flux cleaned = -0.000816227 Jy
! Component: 550  -  total flux cleaned = -0.000887794 Jy
! Component: 600  -  total flux cleaned = -0.000957836 Jy
! Component: 650  -  total flux cleaned = -0.0010152 Jy
! Component: 700  -  total flux cleaned = -0.00107157 Jy
! Component: 750  -  total flux cleaned = -0.00113809 Jy
! Component: 800  -  total flux cleaned = -0.00121423 Jy
! Component: 850  -  total flux cleaned = -0.00126766 Jy
! Component: 900  -  total flux cleaned = -0.00134137 Jy
! Component: 950  -  total flux cleaned = -0.00137243 Jy
! Component: 1000  -  total flux cleaned = -0.00144396 Jy
! Component: 1050  -  total flux cleaned = -0.00148426 Jy
! Component: 1100  -  total flux cleaned = -0.00153405 Jy
! Component: 1150  -  total flux cleaned = -0.00161236 Jy
! Component: 1200  -  total flux cleaned = -0.00165087 Jy
! Component: 1250  -  total flux cleaned = -0.00169846 Jy
! Component: 1300  -  total flux cleaned = -0.00176409 Jy
! Component: 1350  -  total flux cleaned = -0.00180118 Jy
! Component: 1400  -  total flux cleaned = -0.00185614 Jy
! Component: 1450  -  total flux cleaned = -0.00190135 Jy
! Component: 1500  -  total flux cleaned = -0.00192816 Jy
! Component: 1550  -  total flux cleaned = -0.00196349 Jy
! Component: 1600  -  total flux cleaned = -0.00198976 Jy
! Component: 1650  -  total flux cleaned = -0.00200709 Jy
! Component: 1700  -  total flux cleaned = -0.00203281 Jy
! Component: 1750  -  total flux cleaned = -0.00204983 Jy
! Component: 1800  -  total flux cleaned = -0.00206666 Jy
! Component: 1850  -  total flux cleaned = -0.00208336 Jy
! Component: 1900  -  total flux cleaned = -0.00210824 Jy
! Component: 1950  -  total flux cleaned = -0.00212469 Jy
! Component: 2000  -  total flux cleaned = -0.00215726 Jy
! Component: 2050  -  total flux cleaned = -0.00216538 Jy
! Component: 2100  -  total flux cleaned = -0.00219751 Jy
! Component: 2150  -  total flux cleaned = -0.00222946 Jy
! Component: 2200  -  total flux cleaned = -0.00223744 Jy
! Component: 2250  -  total flux cleaned = -0.00224534 Jy
! Component: 2300  -  total flux cleaned = -0.00226101 Jy
! Component: 2350  -  total flux cleaned = -0.00226878 Jy
! Component: 2400  -  total flux cleaned = -0.0022611 Jy
! Component: 2450  -  total flux cleaned = -0.00226879 Jy
! Component: 2500  -  total flux cleaned = -0.00227646 Jy
! Component: 2550  -  total flux cleaned = -0.00226116 Jy
! Component: 2600  -  total flux cleaned = -0.00226112 Jy
! Component: 2650  -  total flux cleaned = -0.00226871 Jy
! Component: 2700  -  total flux cleaned = -0.00226868 Jy
! Component: 2750  -  total flux cleaned = -0.00226871 Jy
! Component: 2800  -  total flux cleaned = -0.00228383 Jy
! Component: 2850  -  total flux cleaned = -0.00229141 Jy
! Component: 2900  -  total flux cleaned = -0.00228385 Jy
! Component: 2950  -  total flux cleaned = -0.00229894 Jy
! Component: 3000  -  total flux cleaned = -0.00229895 Jy
! Component: 3050  -  total flux cleaned = -0.00232157 Jy
! Component: 3100  -  total flux cleaned = -0.00232157 Jy
! Component: 3150  -  total flux cleaned = -0.00235173 Jy
! Component: 3200  -  total flux cleaned = -0.0023442 Jy
! Component: 3250  -  total flux cleaned = -0.00235175 Jy
! Component: 3300  -  total flux cleaned = -0.00237442 Jy
! Component: 3350  -  total flux cleaned = -0.00236678 Jy
! Component: 3400  -  total flux cleaned = -0.00238201 Jy
! Component: 3450  -  total flux cleaned = -0.00239726 Jy
! Component: 3500  -  total flux cleaned = -0.00240487 Jy
! Component: 3550  -  total flux cleaned = -0.00243554 Jy
! Component: 3600  -  total flux cleaned = -0.00245865 Jy
! Component: 3650  -  total flux cleaned = -0.00247404 Jy
! Component: 3700  -  total flux cleaned = -0.0024972 Jy
! Component: 3750  -  total flux cleaned = -0.00252829 Jy
! Component: 3800  -  total flux cleaned = -0.00254393 Jy
! Component: 3850  -  total flux cleaned = -0.00254389 Jy
! Component: 3900  -  total flux cleaned = -0.00256756 Jy
! Component: 3950  -  total flux cleaned = -0.00257546 Jy
! Component: 4000  -  total flux cleaned = -0.00259141 Jy
! Component: 4050  -  total flux cleaned = -0.00260749 Jy
! Total flux subtracted in 4096 components = -0.00262359 Jy
! Clean residual min=-0.000525 max=0.000518 Jy/beam
! Clean residual mean=-0.000001 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0325438 Jy
keep
! Adding 222 model components to the UV plane model.
! The established model now contains 297 components and 0.0325438 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0445+7838_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.527 x 13.59 at 20.67 degrees (North through East)
! Clean map  min=-0.0012687  max=0.028367 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0445+7838_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0283668 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000146192 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.54609 1.54609 3.09219 6.18438 12.3688 24.7375 49.475 98.95
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.028 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0445+7838_S_uvs.log closed on Sat Oct  5 18:56:45 2013