! Started logfile: /g0/scr/pima/npcsb_uvs/J0415+7753_S_uvs.log on Sat Oct  5 18:56:38 2013
obs /g0/scr/pima/npcsb_uvs/J0415+7753_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0415+7753_S_uva.fits
! AN table 1: 46 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.710404 visibilities/baseline/integration-bin.
! Found source: J0415+7753
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3660 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0415+7753_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012065Jy  sigma=1.026894
! Fit after  self-cal, rms=0.922063Jy  sigma=0.865428
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=9.513 mas, bmaj=11.44 mas, bpa=43.18 degrees
! Estimated noise=29.9097 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0814899 Jy
! Component: 100  -  total flux cleaned = 0.115523 Jy
! Total flux subtracted in 100 components = 0.115523 Jy
! Clean residual min=-0.015887 max=0.017500 Jy/beam
! Clean residual mean=0.000120 rms=0.005945 Jy/beam
! Combined flux in latest and established models = 0.115523 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.115523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092750Jy  sigma=0.112652
! Fit after  self-cal, rms=0.090734Jy  sigma=0.111390
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.02 mas, bmaj=12.93 mas, bpa=40 degrees
! Estimated noise=13.4979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0339279 Jy
! Component: 100  -  total flux cleaned = 0.046733 Jy
! Component: 150  -  total flux cleaned = 0.0521275 Jy
! Component: 200  -  total flux cleaned = 0.0556747 Jy
! Total flux subtracted in 200 components = 0.0556747 Jy
! Clean residual min=-0.006547 max=0.006621 Jy/beam
! Clean residual mean=0.000059 rms=0.002933 Jy/beam
! Combined flux in latest and established models = 0.171198 Jy
! Performing phase self-cal
! Adding 116 model components to the UV plane model.
! The established model now contains 145 components and 0.171198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085113Jy  sigma=0.088627
! Fit after  self-cal, rms=0.084527Jy  sigma=0.088169
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.94     HN        1.00*    KP        0.94     
!   LA        1.02     NL        0.85     OV        0.91     PT        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.00*    KP        0.85     
!   LA        0.98     NL        0.90     OV        0.98     PT        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.97     HN        1.00*    KP        0.97     
!   LA        0.82     NL        0.82     OV        1.03     PT        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.94     HN        1.00*    KP        0.91     
!   LA        0.68     NL        0.87     OV        0.83     PT        0.92     
! 
! 
! Fit before self-cal, rms=0.084527Jy  sigma=0.088169
! Fit after  self-cal, rms=0.074649Jy  sigma=0.079378
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.15 mas, bmaj=12.74 mas, bpa=34.96 degrees
! Estimated noise=11.2046 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.01003 Jy
! Component: 100  -  total flux cleaned = -0.00933755 Jy
! Component: 150  -  total flux cleaned = -0.00936478 Jy
! Component: 200  -  total flux cleaned = -0.00950463 Jy
! Total flux subtracted in 200 components = -0.00950463 Jy
! Clean residual min=-0.001843 max=0.001849 Jy/beam
! Clean residual mean=0.000002 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.161693 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 198 components and 0.161693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069214Jy  sigma=0.080498
! Fit after  self-cal, rms=0.069091Jy  sigma=0.080290
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069091Jy  sigma=0.080290
! Fit after  self-cal, rms=0.064592Jy  sigma=0.078620
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.1 mas, bmaj=12.32 mas, bpa=28.78 degrees
! Estimated noise=9.87669 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00969228 Jy
! Component: 100  -  total flux cleaned = -0.0113445 Jy
! Component: 150  -  total flux cleaned = -0.0118662 Jy
! Component: 200  -  total flux cleaned = -0.0122088 Jy
! Total flux subtracted in 200 components = -0.0122088 Jy
! Clean residual min=-0.001266 max=0.001262 Jy/beam
! Clean residual mean=-0.000001 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.149484 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 256 components and 0.149484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060572Jy  sigma=0.080006
! Fit after  self-cal, rms=0.060526Jy  sigma=0.079946
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000434121 Jy
! Component: 100  -  total flux cleaned = 0.000444616 Jy
! Component: 150  -  total flux cleaned = 0.000449684 Jy
! Component: 200  -  total flux cleaned = 0.000114695 Jy
! Total flux subtracted in 200 components = 0.000114695 Jy
! Clean residual min=-0.000891 max=0.000896 Jy/beam
! Clean residual mean=0.000001 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.149599 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 309 components and 0.149599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060294Jy  sigma=0.079897
! Fit after  self-cal, rms=0.060289Jy  sigma=0.079879
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060289Jy  sigma=0.079879
! Fit after  self-cal, rms=0.056351Jy  sigma=0.078112
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11 mas, bmaj=11.94 mas, bpa=17.95 degrees
! Estimated noise=8.64627 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00792074 Jy
! Component: 100  -  total flux cleaned = -0.0103389 Jy
! Component: 150  -  total flux cleaned = -0.0115492 Jy
! Component: 200  -  total flux cleaned = -0.0122738 Jy
! Total flux subtracted in 200 components = -0.0122738 Jy
! Clean residual min=-0.000893 max=0.000893 Jy/beam
! Clean residual mean=-0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.137325 Jy
selfcal
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 361 components and 0.137325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053250Jy  sigma=0.079556
! Fit after  self-cal, rms=0.053242Jy  sigma=0.079523
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000156674 Jy
! Component: 100  -  total flux cleaned = -0.000381639 Jy
! Component: 150  -  total flux cleaned = -0.000461503 Jy
! Component: 200  -  total flux cleaned = -0.000282298 Jy
! Total flux subtracted in 200 components = -0.000282298 Jy
! Clean residual min=-0.000572 max=0.000572 Jy/beam
! Clean residual mean=-0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.137043 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 414 components and 0.137043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053089Jy  sigma=0.079594
! Fit after  self-cal, rms=0.053092Jy  sigma=0.079588
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053092Jy  sigma=0.079588
! Fit after  self-cal, rms=0.049822Jy  sigma=0.077851
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.88 mas, bmaj=12.94 mas, bpa=5.971 degrees
! Estimated noise=7.52327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00700339 Jy
! Component: 100  -  total flux cleaned = -0.0092911 Jy
! Component: 150  -  total flux cleaned = -0.00972504 Jy
! Component: 200  -  total flux cleaned = -0.00999278 Jy
! Total flux subtracted in 200 components = -0.00999278 Jy
! Clean residual min=-0.000753 max=0.000752 Jy/beam
! Clean residual mean=0.000000 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.12705 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 457 components and 0.12705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047216Jy  sigma=0.079328
! Fit after  self-cal, rms=0.047221Jy  sigma=0.079307
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000743389 Jy
! Component: 100  -  total flux cleaned = -0.000807336 Jy
! Component: 150  -  total flux cleaned = -0.000835645 Jy
! Component: 200  -  total flux cleaned = -0.000861701 Jy
! Total flux subtracted in 200 components = -0.000861701 Jy
! Clean residual min=-0.000412 max=0.000411 Jy/beam
! Clean residual mean=-0.000001 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.126188 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 526 components and 0.126188 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047076Jy  sigma=0.079456
! Fit after  self-cal, rms=0.047075Jy  sigma=0.079454
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=10.82 mas, bmaj=11.71 mas, bpa=2.875 degrees
! Estimated noise=7.55567 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.82 x 11.71 at 2.875 degrees (North through East)
! Clean map  min=-0.0054404  max=0.069279 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.588 mas, bmaj=10.33 mas, bpa=16.19 degrees
! Estimated noise=16.2721 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0448134 Jy
! Component: 100  -  total flux cleaned = 0.0678277 Jy
! Component: 150  -  total flux cleaned = 0.0807686 Jy
! Component: 200  -  total flux cleaned = 0.0891569 Jy
! Total flux subtracted in 200 components = 0.0891569 Jy
! Clean residual min=-0.006721 max=0.006742 Jy/beam
! Clean residual mean=0.000054 rms=0.002653 Jy/beam
! Combined flux in latest and established models = 0.0891569 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 75 model components to the UV plane model.
! The established model now contains 75 components and 0.0891569 Jy
! Inverting map and beam 
! Estimated beam: bmin=10.82 mas, bmaj=11.71 mas, bpa=2.875 degrees
! Estimated noise=7.55567 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123938 Jy
! Component: 100  -  total flux cleaned = 0.0175843 Jy
! Component: 150  -  total flux cleaned = 0.0202908 Jy
! Component: 200  -  total flux cleaned = 0.0214495 Jy
! Total flux subtracted in 200 components = 0.0214495 Jy
! Clean residual min=-0.003461 max=0.003474 Jy/beam
! Clean residual mean=0.000032 rms=0.001615 Jy/beam
! Combined flux in latest and established models = 0.110606 Jy
! Adding 115 model components to the UV plane model.
! The established model now contains 189 components and 0.110606 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.88 mas, bmaj=12.94 mas, bpa=5.971 degrees
! Estimated noise=7.52327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200606 Jy
! Component: 100  -  total flux cleaned = 0.00270459 Jy
! Component: 150  -  total flux cleaned = 0.00315736 Jy
! Component: 200  -  total flux cleaned = 0.00280034 Jy
! Total flux subtracted in 200 components = 0.00280034 Jy
! Clean residual min=-0.001859 max=0.001859 Jy/beam
! Clean residual mean=0.000018 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.113407 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00041536 Jy
! Component: 100  -  total flux cleaned = -0.000969132 Jy
! Component: 150  -  total flux cleaned = -0.00154518 Jy
! Component: 200  -  total flux cleaned = -0.00206789 Jy
! Total flux subtracted in 200 components = -0.00206789 Jy
! Clean residual min=-0.001210 max=0.001218 Jy/beam
! Clean residual mean=0.000014 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.111339 Jy
! Adding 186 model components to the UV plane model.
! The established model now contains 366 components and 0.111339 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=10.82 mas, bmaj=11.71 mas, bpa=2.875 degrees
! Estimated noise=7.55567 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439814 Jy
! Component: 100  -  total flux cleaned = 0.000488888 Jy
! Component: 150  -  total flux cleaned = 0.000728169 Jy
! Component: 200  -  total flux cleaned = 0.000774764 Jy
! Total flux subtracted in 200 components = 0.000774764 Jy
! Clean residual min=-0.000671 max=0.000671 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.112114 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 429 components and 0.112114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046968Jy  sigma=0.080128
! Fit after  self-cal, rms=0.046945Jy  sigma=0.080075
wmodel /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.mod
! Writing 429 model components to file: /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0415+7753_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0415+7753_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J0415+7753_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.82 x 11.71 at 2.875 degrees (North through East)
! Clean map  min=-0.0050617  max=0.05767 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0415+7753_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0576698 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000250343 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.30229 1.30229 2.60458 5.20916 10.4183 20.8366 41.6733 83.3466
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.057 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0415+7753_S_uvs.log closed on Sat Oct  5 18:56:40 2013