! Started logfile: /g0/scr/pima/npcsb_uvs/J0410+8208_X_uvs.log on Sat Oct  5 18:51:28 2013
obs /g0/scr/pima/npcsb_uvs/J0410+8208_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.693237 visibilities/baseline/integration-bin.
! Found source: J0410+8208
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5740 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0410+8208_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006013Jy  sigma=0.808500
! Fit after  self-cal, rms=0.951525Jy  sigma=0.729262
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8054 mas, bmaj=3.428 mas, bpa=-8.63 degrees
! Estimated noise=27.9194 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0577771 Jy
! Component: 100  -  total flux cleaned = 0.0708642 Jy
! Total flux subtracted in 100 components = 0.0708642 Jy
! Clean residual min=-0.007682 max=0.008547 Jy/beam
! Clean residual mean=-0.000008 rms=0.002104 Jy/beam
! Combined flux in latest and established models = 0.0708642 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0708642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083121Jy  sigma=0.070799
! Fit after  self-cal, rms=0.080982Jy  sigma=0.069283
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.061 mas, bmaj=3.522 mas, bpa=-9.596 degrees
! Estimated noise=13.2987 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00733379 Jy
! Component: 100  -  total flux cleaned = 0.0114745 Jy
! Component: 150  -  total flux cleaned = 0.0140092 Jy
! Component: 200  -  total flux cleaned = 0.0147823 Jy
! Total flux subtracted in 200 components = 0.0147823 Jy
! Clean residual min=-0.004485 max=0.003763 Jy/beam
! Clean residual mean=-0.000005 rms=0.001064 Jy/beam
! Combined flux in latest and established models = 0.0856465 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.0856465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082116Jy  sigma=0.067444
! Fit after  self-cal, rms=0.082034Jy  sigma=0.067389
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.86     FD        0.87     HN        0.86     KP        0.98     
!   LA        1.00     MK        1.00*    NL        1.03     OV        0.98     
!   PT        0.92     SC        0.85     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        0.87     KP        0.82     
!   LA        0.86     MK        1.00*    NL        1.03     OV        0.90     
!   PT        0.92     SC        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.86     HN        0.82     KP        0.74     
!   LA        0.91     MK        1.00*    NL        0.95     OV        0.89     
!   PT        0.88     SC        0.86     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.71     FD        0.96     HN        0.81     KP        0.78     
!   LA        0.80     MK        1.00*    NL        0.84     OV        0.88     
!   PT        1.16     SC        0.74     
! 
! 
! Fit before self-cal, rms=0.082034Jy  sigma=0.067389
! Fit after  self-cal, rms=0.069862Jy  sigma=0.064422
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.034 mas, bmaj=3.507 mas, bpa=-9.588 degrees
! Estimated noise=10.4758 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0120612 Jy
! Component: 100  -  total flux cleaned = -0.0144909 Jy
! Component: 150  -  total flux cleaned = -0.0142545 Jy
! Component: 200  -  total flux cleaned = -0.0140132 Jy
! Total flux subtracted in 200 components = -0.0140132 Jy
! Clean residual min=-0.002807 max=0.002668 Jy/beam
! Clean residual mean=-0.000008 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.0716333 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.0716333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064201Jy  sigma=0.066225
! Fit after  self-cal, rms=0.064281Jy  sigma=0.066112
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064281Jy  sigma=0.066112
! Fit after  self-cal, rms=0.056143Jy  sigma=0.064247
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.026 mas, bmaj=3.485 mas, bpa=-9.53 degrees
! Estimated noise=8.40551 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00960539 Jy
! Component: 100  -  total flux cleaned = -0.0117027 Jy
! Component: 150  -  total flux cleaned = -0.0117152 Jy
! Component: 200  -  total flux cleaned = -0.0116976 Jy
! Total flux subtracted in 200 components = -0.0116976 Jy
! Clean residual min=-0.002260 max=0.002115 Jy/beam
! Clean residual mean=-0.000006 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.0599357 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 38 components and 0.0599357 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051668Jy  sigma=0.066060
! Fit after  self-cal, rms=0.051681Jy  sigma=0.066051
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.15235e-05 Jy
! Component: 100  -  total flux cleaned = -6.84334e-05 Jy
! Component: 150  -  total flux cleaned = -6.8982e-05 Jy
! Component: 200  -  total flux cleaned = -4.98087e-05 Jy
! Total flux subtracted in 200 components = -4.98087e-05 Jy
! Clean residual min=-0.002300 max=0.002118 Jy/beam
! Clean residual mean=-0.000006 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.0598859 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 47 components and 0.0598858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051639Jy  sigma=0.066088
! Fit after  self-cal, rms=0.051637Jy  sigma=0.066086
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051637Jy  sigma=0.066086
! Fit after  self-cal, rms=0.045083Jy  sigma=0.064198
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.017 mas, bmaj=3.466 mas, bpa=-9.413 degrees
! Estimated noise=6.77151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00740572 Jy
! Component: 100  -  total flux cleaned = -0.00906603 Jy
! Component: 150  -  total flux cleaned = -0.00942814 Jy
! Component: 200  -  total flux cleaned = -0.00947337 Jy
! Total flux subtracted in 200 components = -0.00947337 Jy
! Clean residual min=-0.001853 max=0.001729 Jy/beam
! Clean residual mean=-0.000005 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.0504125 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 56 components and 0.0504125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041675Jy  sigma=0.066006
! Fit after  self-cal, rms=0.041675Jy  sigma=0.066001
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000155214 Jy
! Component: 100  -  total flux cleaned = -0.000195559 Jy
! Component: 150  -  total flux cleaned = -0.000221172 Jy
! Component: 200  -  total flux cleaned = -0.000228541 Jy
! Total flux subtracted in 200 components = -0.000228541 Jy
! Clean residual min=-0.001841 max=0.001699 Jy/beam
! Clean residual mean=-0.000005 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.0501839 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 62 components and 0.0501839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041640Jy  sigma=0.066045
! Fit after  self-cal, rms=0.041641Jy  sigma=0.066044
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041641Jy  sigma=0.066044
! Fit after  self-cal, rms=0.036370Jy  sigma=0.064161
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.66 mas, bpa=-9.689 degrees
! Estimated noise=6.80455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00584381 Jy
! Component: 100  -  total flux cleaned = -0.00730527 Jy
! Component: 150  -  total flux cleaned = -0.0079227 Jy
! Component: 200  -  total flux cleaned = -0.00822708 Jy
! Total flux subtracted in 200 components = -0.00822708 Jy
! Clean residual min=-0.001896 max=0.001947 Jy/beam
! Clean residual mean=-0.000007 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.0419569 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 67 components and 0.0419569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033701Jy  sigma=0.065842
! Fit after  self-cal, rms=0.033702Jy  sigma=0.065836
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.19234e-05 Jy
! Component: 100  -  total flux cleaned = -0.000120177 Jy
! Component: 150  -  total flux cleaned = -0.000143263 Jy
! Component: 200  -  total flux cleaned = -0.000143054 Jy
! Total flux subtracted in 200 components = -0.000143054 Jy
! Clean residual min=-0.001917 max=0.001955 Jy/beam
! Clean residual mean=-0.000008 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.0418138 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.0418138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033662Jy  sigma=0.065899
! Fit after  self-cal, rms=0.033659Jy  sigma=0.065898
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=3.453 mas, bpa=-9.272 degrees
! Estimated noise=5.453 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 3.453 at -9.272 degrees (North through East)
! Clean map  min=-0.0014763  max=0.031406 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7777 mas, bmaj=3.42 mas, bpa=-8.329 degrees
! Estimated noise=10.8176 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232598 Jy
! Component: 100  -  total flux cleaned = 0.029121 Jy
! Component: 150  -  total flux cleaned = 0.0321583 Jy
! Component: 200  -  total flux cleaned = 0.0343647 Jy
! Total flux subtracted in 200 components = 0.0343647 Jy
! Clean residual min=-0.002587 max=0.002529 Jy/beam
! Clean residual mean=-0.000005 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.0343647 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0343647 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=3.453 mas, bpa=-9.272 degrees
! Estimated noise=5.453 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259117 Jy
! Component: 100  -  total flux cleaned = 0.00419566 Jy
! Component: 150  -  total flux cleaned = 0.00524941 Jy
! Component: 200  -  total flux cleaned = 0.00595213 Jy
! Total flux subtracted in 200 components = 0.00595213 Jy
! Clean residual min=-0.001648 max=0.001411 Jy/beam
! Clean residual mean=-0.000005 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.0403168 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 34 components and 0.0403168 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.167 mas, bmaj=3.66 mas, bpa=-9.689 degrees
! Estimated noise=6.80455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000718221 Jy
! Component: 100  -  total flux cleaned = 0.000981606 Jy
! Component: 150  -  total flux cleaned = 0.00103952 Jy
! Component: 200  -  total flux cleaned = 0.0010917 Jy
! Total flux subtracted in 200 components = 0.0010917 Jy
! Clean residual min=-0.001927 max=0.001955 Jy/beam
! Clean residual mean=-0.000008 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.0414085 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.97485e-05 Jy
! Component: 100  -  total flux cleaned = 5.37989e-05 Jy
! Component: 150  -  total flux cleaned = 6.22448e-05 Jy
! Component: 200  -  total flux cleaned = 7.00991e-05 Jy
! Total flux subtracted in 200 components = 7.00991e-05 Jy
! Clean residual min=-0.001913 max=0.001953 Jy/beam
! Clean residual mean=-0.000008 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.0414786 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 55 components and 0.0414786 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.008 mas, bmaj=3.453 mas, bpa=-9.272 degrees
! Estimated noise=5.453 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.19825e-06 Jy
! Component: 100  -  total flux cleaned = -3.44353e-05 Jy
! Component: 150  -  total flux cleaned = -4.43427e-05 Jy
! Component: 200  -  total flux cleaned = -3.60635e-05 Jy
! Total flux subtracted in 200 components = -3.60635e-05 Jy
! Clean residual min=-0.001580 max=0.001383 Jy/beam
! Clean residual mean=-0.000004 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.0414425 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 65 components and 0.0414425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033546Jy  sigma=0.066109
! Fit after  self-cal, rms=0.033540Jy  sigma=0.066102
wmodel /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.mod
! Writing 65 model components to file: /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0410+8208_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237028 Jy
! Component: 100  -  total flux cleaned = -0.000187737 Jy
! Component: 150  -  total flux cleaned = -0.000141007 Jy
! Component: 200  -  total flux cleaned = 3.12605e-05 Jy
! Component: 250  -  total flux cleaned = 0.000173919 Jy
! Component: 300  -  total flux cleaned = 0.000290775 Jy
! Component: 350  -  total flux cleaned = 0.000291793 Jy
! Component: 400  -  total flux cleaned = 0.000274554 Jy
! Component: 450  -  total flux cleaned = 0.000239464 Jy
! Component: 500  -  total flux cleaned = 0.000256261 Jy
! Component: 550  -  total flux cleaned = 0.000239132 Jy
! Component: 600  -  total flux cleaned = 0.000223109 Jy
! Component: 650  -  total flux cleaned = 0.000255376 Jy
! Component: 700  -  total flux cleaned = 0.00028667 Jy
! Component: 750  -  total flux cleaned = 0.000317174 Jy
! Component: 800  -  total flux cleaned = 0.000407397 Jy
! Component: 850  -  total flux cleaned = 0.000466382 Jy
! Component: 900  -  total flux cleaned = 0.000509924 Jy
! Component: 950  -  total flux cleaned = 0.000524122 Jy
! Component: 1000  -  total flux cleaned = 0.000594523 Jy
! Component: 1050  -  total flux cleaned = 0.000567039 Jy
! Component: 1100  -  total flux cleaned = 0.000553622 Jy
! Component: 1150  -  total flux cleaned = 0.000607678 Jy
! Component: 1200  -  total flux cleaned = 0.000580816 Jy
! Component: 1250  -  total flux cleaned = 0.000567381 Jy
! Component: 1300  -  total flux cleaned = 0.000554147 Jy
! Component: 1350  -  total flux cleaned = 0.000515636 Jy
! Component: 1400  -  total flux cleaned = 0.00054111 Jy
! Component: 1450  -  total flux cleaned = 0.000503266 Jy
! Component: 1500  -  total flux cleaned = 0.000490876 Jy
! Component: 1550  -  total flux cleaned = 0.000527582 Jy
! Component: 1600  -  total flux cleaned = 0.000454201 Jy
! Component: 1650  -  total flux cleaned = 0.000405925 Jy
! Component: 1700  -  total flux cleaned = 0.000334078 Jy
! Component: 1750  -  total flux cleaned = 0.000298507 Jy
! Component: 1800  -  total flux cleaned = 0.000228144 Jy
! Component: 1850  -  total flux cleaned = 0.000169962 Jy
! Component: 1900  -  total flux cleaned = 0.000158443 Jy
! Component: 1950  -  total flux cleaned = 8.96405e-05 Jy
! Component: 2000  -  total flux cleaned = 4.40886e-05 Jy
! Component: 2050  -  total flux cleaned = -4.61169e-05 Jy
! Component: 2100  -  total flux cleaned = -7.95537e-05 Jy
! Component: 2150  -  total flux cleaned = -0.000146242 Jy
! Component: 2200  -  total flux cleaned = -0.000190449 Jy
! Component: 2250  -  total flux cleaned = -0.000256029 Jy
! Component: 2300  -  total flux cleaned = -0.000299311 Jy
! Component: 2350  -  total flux cleaned = -0.000331568 Jy
! Component: 2400  -  total flux cleaned = -0.000363724 Jy
! Component: 2450  -  total flux cleaned = -0.000416975 Jy
! Component: 2500  -  total flux cleaned = -0.000459328 Jy
! Component: 2550  -  total flux cleaned = -0.000501278 Jy
! Component: 2600  -  total flux cleaned = -0.000542894 Jy
! Component: 2650  -  total flux cleaned = -0.000563639 Jy
! Component: 2700  -  total flux cleaned = -0.000573936 Jy
! Component: 2750  -  total flux cleaned = -0.000625033 Jy
! Component: 2800  -  total flux cleaned = -0.000645406 Jy
! Component: 2850  -  total flux cleaned = -0.0006657 Jy
! Component: 2900  -  total flux cleaned = -0.000725938 Jy
! Component: 2950  -  total flux cleaned = -0.000775845 Jy
! Component: 3000  -  total flux cleaned = -0.000795663 Jy
! Component: 3050  -  total flux cleaned = -0.000805589 Jy
! Component: 3100  -  total flux cleaned = -0.000884297 Jy
! Component: 3150  -  total flux cleaned = -0.000933196 Jy
! Component: 3200  -  total flux cleaned = -0.000972122 Jy
! Component: 3250  -  total flux cleaned = -0.00103019 Jy
! Component: 3300  -  total flux cleaned = -0.00105908 Jy
! Component: 3350  -  total flux cleaned = -0.0010975 Jy
! Component: 3400  -  total flux cleaned = -0.00112619 Jy
! Component: 3450  -  total flux cleaned = -0.00117377 Jy
! Component: 3500  -  total flux cleaned = -0.00119271 Jy
! Component: 3550  -  total flux cleaned = -0.00123044 Jy
! Component: 3600  -  total flux cleaned = -0.00128684 Jy
! Component: 3650  -  total flux cleaned = -0.00127744 Jy
! Component: 3700  -  total flux cleaned = -0.00131474 Jy
! Component: 3750  -  total flux cleaned = -0.00136121 Jy
! Component: 3800  -  total flux cleaned = -0.00137046 Jy
! Component: 3850  -  total flux cleaned = -0.00137042 Jy
! Component: 3900  -  total flux cleaned = -0.00137963 Jy
! Component: 3950  -  total flux cleaned = -0.00137967 Jy
! Component: 4000  -  total flux cleaned = -0.00143433 Jy
! Component: 4050  -  total flux cleaned = -0.00145254 Jy
! Total flux subtracted in 4096 components = -0.00147066 Jy
! Clean residual min=-0.000478 max=0.000596 Jy/beam
! Clean residual mean=-0.000001 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0399719 Jy
keep
! Adding 285 model components to the UV plane model.
! The established model now contains 350 components and 0.0399719 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0410+8208_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.008 x 3.453 at -9.272 degrees (North through East)
! Clean map  min=-0.0010592  max=0.031232 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0312321 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000154754 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.48649 1.48649 2.97298 5.94597 11.8919 23.7839 47.5677 95.1355
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.031 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0410+8208_X_uvs.log closed on Sat Oct  5 18:51:32 2013