! Started logfile: /g0/scr/pima/npcsb_uvs/J0410+8208_S_uvs.log on Sat Oct  5 18:56:33 2013
obs /g0/scr/pima/npcsb_uvs/J0410+8208_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.978261 visibilities/baseline/integration-bin.
! Found source: J0410+8208
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8100 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0410+8208_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004730Jy  sigma=1.185394
! Fit after  self-cal, rms=0.877235Jy  sigma=0.979329
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.24 mas, bmaj=10.39 mas, bpa=2.832 degrees
! Estimated noise=15.6101 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.114566 Jy
! Component: 100  -  total flux cleaned = 0.14183 Jy
! Total flux subtracted in 100 components = 0.14183 Jy
! Clean residual min=-0.009914 max=0.011521 Jy/beam
! Clean residual mean=0.000003 rms=0.002301 Jy/beam
! Combined flux in latest and established models = 0.14183 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.14183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102472Jy  sigma=0.125642
! Fit after  self-cal, rms=0.102478Jy  sigma=0.125616
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.115 mas, bmaj=10.88 mas, bpa=2.453 degrees
! Estimated noise=7.27201 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0159595 Jy
! Component: 100  -  total flux cleaned = 0.0235491 Jy
! Component: 150  -  total flux cleaned = 0.0284315 Jy
! Component: 200  -  total flux cleaned = 0.0317362 Jy
! Total flux subtracted in 200 components = 0.0317362 Jy
! Clean residual min=-0.010036 max=0.009925 Jy/beam
! Clean residual mean=0.000009 rms=0.002349 Jy/beam
! Combined flux in latest and established models = 0.173567 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 28 components and 0.173567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103960Jy  sigma=0.118838
! Fit after  self-cal, rms=0.103982Jy  sigma=0.118798
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.92     HN        0.81     KP        0.91     
!   LA        0.99     MK        0.86     NL        1.08     OV        1.07     
!   PT        0.97     SC        0.82     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.94     HN        0.90     KP        0.91     
!   LA        0.92     MK        0.88     NL        1.13     OV        1.01     
!   PT        0.94     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.96     HN        0.91     KP        0.95     
!   LA        0.78     MK        0.97     NL        1.27     OV        1.05     
!   PT        1.10     SC        0.88     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.95     HN        0.80     KP        0.86     
!   LA        0.66     MK        0.99     NL        1.19     OV        0.89     
!   PT        0.88     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.103982Jy  sigma=0.118798
! Fit after  self-cal, rms=0.093991Jy  sigma=0.109898
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.075 mas, bmaj=10.75 mas, bpa=2.163 degrees
! Estimated noise=6.38397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.013566 Jy
! Component: 100  -  total flux cleaned = -0.0151823 Jy
! Component: 150  -  total flux cleaned = -0.0151976 Jy
! Component: 200  -  total flux cleaned = -0.0150459 Jy
! Total flux subtracted in 200 components = -0.0150459 Jy
! Clean residual min=-0.003685 max=0.006858 Jy/beam
! Clean residual mean=0.000006 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.158521 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 34 components and 0.158521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088164Jy  sigma=0.112205
! Fit after  self-cal, rms=0.088329Jy  sigma=0.112051
! Inverting map 
! Added new window around map position (-11, 9.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0066805 Jy
! Component: 100  -  total flux cleaned = 0.00971838 Jy
! Component: 150  -  total flux cleaned = 0.0107086 Jy
! Component: 200  -  total flux cleaned = 0.0111773 Jy
! Total flux subtracted in 200 components = 0.0111773 Jy
! Clean residual min=-0.003271 max=0.003611 Jy/beam
! Clean residual mean=0.000004 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.169698 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 70 components and 0.169698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087648Jy  sigma=0.111376
! Fit after  self-cal, rms=0.087548Jy  sigma=0.111265
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087548Jy  sigma=0.111265
! Fit after  self-cal, rms=0.082582Jy  sigma=0.108810
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.044 mas, bmaj=10.73 mas, bpa=2.163 degrees
! Estimated noise=5.67679 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0118353 Jy
! Component: 100  -  total flux cleaned = -0.0129753 Jy
! Component: 150  -  total flux cleaned = -0.012528 Jy
! Component: 200  -  total flux cleaned = -0.0123497 Jy
! Total flux subtracted in 200 components = -0.0123497 Jy
! Clean residual min=-0.002690 max=0.003106 Jy/beam
! Clean residual mean=0.000003 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.157348 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 98 components and 0.157348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077624Jy  sigma=0.110937
! Fit after  self-cal, rms=0.077606Jy  sigma=0.110920
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (9.5, -26.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135087 Jy
! Component: 100  -  total flux cleaned = 0.00205908 Jy
! Component: 150  -  total flux cleaned = 0.00239853 Jy
! Component: 200  -  total flux cleaned = 0.00268564 Jy
! Total flux subtracted in 200 components = 0.00268564 Jy
! Clean residual min=-0.002389 max=0.002366 Jy/beam
! Clean residual mean=0.000002 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.160034 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 123 components and 0.160034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077309Jy  sigma=0.110876
! Fit after  self-cal, rms=0.077293Jy  sigma=0.110853
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077293Jy  sigma=0.110853
! Fit after  self-cal, rms=0.073080Jy  sigma=0.108510
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.018 mas, bmaj=10.71 mas, bpa=2.219 degrees
! Estimated noise=5.06513 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0102861 Jy
! Component: 100  -  total flux cleaned = -0.0125853 Jy
! Component: 150  -  total flux cleaned = -0.0127495 Jy
! Component: 200  -  total flux cleaned = -0.0128374 Jy
! Total flux subtracted in 200 components = -0.0128374 Jy
! Clean residual min=-0.002192 max=0.002229 Jy/beam
! Clean residual mean=0.000002 rms=0.000535 Jy/beam
! Combined flux in latest and established models = 0.147196 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 142 components and 0.147196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068819Jy  sigma=0.110670
! Fit after  self-cal, rms=0.068810Jy  sigma=0.110661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173609 Jy
! Component: 100  -  total flux cleaned = 0.000173578 Jy
! Component: 150  -  total flux cleaned = 0.000139739 Jy
! Component: 200  -  total flux cleaned = 0.000140403 Jy
! Total flux subtracted in 200 components = 0.000140403 Jy
! Clean residual min=-0.002190 max=0.002128 Jy/beam
! Clean residual mean=0.000002 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.147337 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 155 components and 0.147337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068722Jy  sigma=0.110675
! Fit after  self-cal, rms=0.068721Jy  sigma=0.110671
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068721Jy  sigma=0.110671
! Fit after  self-cal, rms=0.065166Jy  sigma=0.108444
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.287 mas, bmaj=12.48 mas, bpa=0.6863 degrees
! Estimated noise=5.64809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0087207 Jy
! Component: 100  -  total flux cleaned = -0.0108986 Jy
! Component: 150  -  total flux cleaned = -0.0119489 Jy
! Component: 200  -  total flux cleaned = -0.0121446 Jy
! Total flux subtracted in 200 components = -0.0121446 Jy
! Clean residual min=-0.001616 max=0.001785 Jy/beam
! Clean residual mean=0.000004 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 0.135192 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 171 components and 0.135192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061610Jy  sigma=0.110345
! Fit after  self-cal, rms=0.061605Jy  sigma=0.110333
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.77035e-05 Jy
! Component: 100  -  total flux cleaned = -7.88101e-05 Jy
! Component: 150  -  total flux cleaned = -0.000124606 Jy
! Component: 200  -  total flux cleaned = -0.00018708 Jy
! Total flux subtracted in 200 components = -0.00018708 Jy
! Clean residual min=-0.001526 max=0.001811 Jy/beam
! Clean residual mean=0.000004 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.135005 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 194 components and 0.135005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061564Jy  sigma=0.110361
! Fit after  self-cal, rms=0.061564Jy  sigma=0.110358
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.996 mas, bmaj=10.7 mas, bpa=2.272 degrees
! Estimated noise=4.53468 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.996 x 10.7 at 2.272 degrees (North through East)
! Clean map  min=-0.0033275  max=0.097526 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.163 mas, bmaj=10.27 mas, bpa=2.674 degrees
! Estimated noise=9.30045 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.068086 Jy
! Component: 100  -  total flux cleaned = 0.0859369 Jy
! Component: 150  -  total flux cleaned = 0.0941605 Jy
! Component: 200  -  total flux cleaned = 0.0994899 Jy
! Total flux subtracted in 200 components = 0.0994899 Jy
! Clean residual min=-0.004282 max=0.004338 Jy/beam
! Clean residual mean=0.000001 rms=0.001098 Jy/beam
! Combined flux in latest and established models = 0.0994899 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0994899 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.996 mas, bmaj=10.7 mas, bpa=2.272 degrees
! Estimated noise=4.53468 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00846357 Jy
! Component: 100  -  total flux cleaned = 0.0140346 Jy
! Component: 150  -  total flux cleaned = 0.0183235 Jy
! Component: 200  -  total flux cleaned = 0.021475 Jy
! Total flux subtracted in 200 components = 0.021475 Jy
! Clean residual min=-0.002618 max=0.003241 Jy/beam
! Clean residual mean=0.000002 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.120965 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 70 components and 0.120965 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.287 mas, bmaj=12.48 mas, bpa=0.6863 degrees
! Estimated noise=5.64809 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00540235 Jy
! Component: 100  -  total flux cleaned = 0.0076117 Jy
! Component: 150  -  total flux cleaned = 0.00895171 Jy
! Component: 200  -  total flux cleaned = 0.00999639 Jy
! Total flux subtracted in 200 components = 0.00999639 Jy
! Clean residual min=-0.002274 max=0.002160 Jy/beam
! Clean residual mean=0.000004 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.130961 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000822431 Jy
! Component: 100  -  total flux cleaned = 0.00148445 Jy
! Component: 150  -  total flux cleaned = 0.00194677 Jy
! Component: 200  -  total flux cleaned = 0.00219886 Jy
! Total flux subtracted in 200 components = 0.00219886 Jy
! Clean residual min=-0.001867 max=0.001856 Jy/beam
! Clean residual mean=0.000004 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.13316 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 144 components and 0.13316 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.996 mas, bmaj=10.7 mas, bpa=2.272 degrees
! Estimated noise=4.53468 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247331 Jy
! Component: 100  -  total flux cleaned = 0.000136451 Jy
! Component: 150  -  total flux cleaned = 4.43415e-05 Jy
! Component: 200  -  total flux cleaned = 3.04586e-06 Jy
! Total flux subtracted in 200 components = 3.04586e-06 Jy
! Clean residual min=-0.001951 max=0.002054 Jy/beam
! Clean residual mean=0.000002 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.133163 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 177 components and 0.133163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061103Jy  sigma=0.111134
! Fit after  self-cal, rms=0.061095Jy  sigma=0.111079
wmodel /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.mod
! Writing 177 model components to file: /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0410+8208_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000108498 Jy
! Component: 100  -  total flux cleaned = 0.000142904 Jy
! Component: 150  -  total flux cleaned = 0.000232683 Jy
! Component: 200  -  total flux cleaned = 0.000465121 Jy
! Component: 250  -  total flux cleaned = 0.000605483 Jy
! Component: 300  -  total flux cleaned = 0.000714709 Jy
! Component: 350  -  total flux cleaned = 0.000874036 Jy
! Component: 400  -  total flux cleaned = 0.00100278 Jy
! Component: 450  -  total flux cleaned = 0.00112824 Jy
! Component: 500  -  total flux cleaned = 0.00125077 Jy
! Component: 550  -  total flux cleaned = 0.00141841 Jy
! Component: 600  -  total flux cleaned = 0.00153541 Jy
! Component: 650  -  total flux cleaned = 0.00164995 Jy
! Component: 700  -  total flux cleaned = 0.00169515 Jy
! Component: 750  -  total flux cleaned = 0.00176127 Jy
! Component: 800  -  total flux cleaned = 0.00176108 Jy
! Component: 850  -  total flux cleaned = 0.00182479 Jy
! Component: 900  -  total flux cleaned = 0.00182447 Jy
! Component: 950  -  total flux cleaned = 0.00178331 Jy
! Component: 1000  -  total flux cleaned = 0.00180409 Jy
! Component: 1050  -  total flux cleaned = 0.0019035 Jy
! Component: 1100  -  total flux cleaned = 0.00190312 Jy
! Component: 1150  -  total flux cleaned = 0.00196098 Jy
! Component: 1200  -  total flux cleaned = 0.00194164 Jy
! Component: 1250  -  total flux cleaned = 0.00192301 Jy
! Component: 1300  -  total flux cleaned = 0.00196018 Jy
! Component: 1350  -  total flux cleaned = 0.00197833 Jy
! Component: 1400  -  total flux cleaned = 0.00194214 Jy
! Component: 1450  -  total flux cleaned = 0.00199579 Jy
! Component: 1500  -  total flux cleaned = 0.00197811 Jy
! Component: 1550  -  total flux cleaned = 0.00199548 Jy
! Component: 1600  -  total flux cleaned = 0.00197809 Jy
! Component: 1650  -  total flux cleaned = 0.00196115 Jy
! Component: 1700  -  total flux cleaned = 0.00196105 Jy
! Component: 1750  -  total flux cleaned = 0.00194429 Jy
! Component: 1800  -  total flux cleaned = 0.00189492 Jy
! Component: 1850  -  total flux cleaned = 0.0018624 Jy
! Component: 1900  -  total flux cleaned = 0.00184617 Jy
! Component: 1950  -  total flux cleaned = 0.00179805 Jy
! Component: 2000  -  total flux cleaned = 0.00178226 Jy
! Component: 2050  -  total flux cleaned = 0.00176656 Jy
! Component: 2100  -  total flux cleaned = 0.00178229 Jy
! Component: 2150  -  total flux cleaned = 0.00179784 Jy
! Component: 2200  -  total flux cleaned = 0.00172066 Jy
! Component: 2250  -  total flux cleaned = 0.00172049 Jy
! Component: 2300  -  total flux cleaned = 0.00167494 Jy
! Component: 2350  -  total flux cleaned = 0.00162981 Jy
! Component: 2400  -  total flux cleaned = 0.00154013 Jy
! Component: 2450  -  total flux cleaned = 0.00155497 Jy
! Component: 2500  -  total flux cleaned = 0.00151077 Jy
! Component: 2550  -  total flux cleaned = 0.00148165 Jy
! Component: 2600  -  total flux cleaned = 0.0014527 Jy
! Component: 2650  -  total flux cleaned = 0.00140952 Jy
! Component: 2700  -  total flux cleaned = 0.00142387 Jy
! Component: 2750  -  total flux cleaned = 0.00135276 Jy
! Component: 2800  -  total flux cleaned = 0.00133862 Jy
! Component: 2850  -  total flux cleaned = 0.00135265 Jy
! Component: 2900  -  total flux cleaned = 0.00129685 Jy
! Component: 2950  -  total flux cleaned = 0.0012968 Jy
! Component: 3000  -  total flux cleaned = 0.00129669 Jy
! Component: 3050  -  total flux cleaned = 0.00128284 Jy
! Component: 3100  -  total flux cleaned = 0.00131013 Jy
! Component: 3150  -  total flux cleaned = 0.0013372 Jy
! Component: 3200  -  total flux cleaned = 0.00129671 Jy
! Component: 3250  -  total flux cleaned = 0.0013235 Jy
! Component: 3300  -  total flux cleaned = 0.00133685 Jy
! Component: 3350  -  total flux cleaned = 0.00133674 Jy
! Component: 3400  -  total flux cleaned = 0.00131037 Jy
! Component: 3450  -  total flux cleaned = 0.00136292 Jy
! Component: 3500  -  total flux cleaned = 0.00137596 Jy
! Component: 3550  -  total flux cleaned = 0.00138895 Jy
! Component: 3600  -  total flux cleaned = 0.0014019 Jy
! Component: 3650  -  total flux cleaned = 0.00141483 Jy
! Component: 3700  -  total flux cleaned = 0.00140202 Jy
! Component: 3750  -  total flux cleaned = 0.00149145 Jy
! Component: 3800  -  total flux cleaned = 0.00145321 Jy
! Component: 3850  -  total flux cleaned = 0.00150388 Jy
! Component: 3900  -  total flux cleaned = 0.00146604 Jy
! Component: 3950  -  total flux cleaned = 0.00151625 Jy
! Component: 4000  -  total flux cleaned = 0.00154125 Jy
! Component: 4050  -  total flux cleaned = 0.00150403 Jy
! Total flux subtracted in 4096 components = 0.00159083 Jy
! Clean residual min=-0.000795 max=0.000687 Jy/beam
! Clean residual mean=0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.134754 Jy
keep
! Adding 299 model components to the UV plane model.
! The established model now contains 476 components and 0.134754 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0410+8208_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.996 x 10.7 at 2.272 degrees (North through East)
! Clean map  min=-0.0028182  max=0.096175 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0410+8208_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0961749 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000231516 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.722171 0.722171 1.44434 2.88868 5.77737 11.5547 23.1095 46.219 92.4379
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.096 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0410+8208_S_uvs.log closed on Sat Oct  5 18:56:37 2013