! Started logfile: /g0/scr/pima/npcsb_uvs/J0339-0146_S_uvs.log on Sat Oct  5 18:56:28 2013
obs /g0/scr/pima/npcsb_uvs/J0339-0146_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0339-0146_S_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0339-0146
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1260 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0339-0146_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=2.370864Jy  sigma=43.443103
! Fit after  self-cal, rms=1.179791Jy  sigma=23.690569
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.024 mas, bmaj=7.222 mas, bpa=0.2644 degrees
! Estimated noise=1.60784 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.61011 Jy
! Component: 100  -  total flux cleaned = 2.07171 Jy
! Total flux subtracted in 100 components = 2.07171 Jy
! Clean residual min=-0.108330 max=0.206140 Jy/beam
! Clean residual mean=0.000129 rms=0.038265 Jy/beam
! Combined flux in latest and established models = 2.07171 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 2.07171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.483595Jy  sigma=9.455791
! Fit after  self-cal, rms=0.483604Jy  sigma=9.455636
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.548 mas, bmaj=8.207 mas, bpa=0.4178 degrees
! Estimated noise=1.26376 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.249545 Jy
! Component: 100  -  total flux cleaned = 0.367057 Jy
! Component: 150  -  total flux cleaned = 0.433777 Jy
! Component: 200  -  total flux cleaned = 0.472132 Jy
! Total flux subtracted in 200 components = 0.472132 Jy
! Clean residual min=-0.083205 max=0.140572 Jy/beam
! Clean residual mean=0.000016 rms=0.025935 Jy/beam
! Combined flux in latest and established models = 2.54384 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 32 components and 2.54384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.399859Jy  sigma=6.741069
! Fit after  self-cal, rms=0.399842Jy  sigma=6.740768
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.93     KP        0.95     
!   LA        1.08     MK        0.88     NL        1.27     OV        0.98     
!   PT        1.06     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.94     KP        0.96     
!   LA        1.03     MK        0.94     NL        1.35     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.03     HN        0.97     KP        0.97     
!   LA        0.85     MK        1.08     NL        1.47     OV        1.05     
!   PT        1.10     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.04     HN        0.90     KP        0.91     
!   LA        0.73     MK        1.09     NL        1.42     OV        0.87     
!   PT        0.97     SC        1.13     
! 
! 
! Fit before self-cal, rms=0.399842Jy  sigma=6.740768
! Fit after  self-cal, rms=0.130259Jy  sigma=1.875954
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.557 mas, bmaj=8.26 mas, bpa=0.2224 degrees
! Estimated noise=1.25773 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0174069 Jy
! Component: 100  -  total flux cleaned = -0.018607 Jy
! Component: 150  -  total flux cleaned = -0.0182785 Jy
! Component: 200  -  total flux cleaned = -0.018016 Jy
! Total flux subtracted in 200 components = -0.018016 Jy
! Clean residual min=-0.017191 max=0.015444 Jy/beam
! Clean residual mean=0.000009 rms=0.003682 Jy/beam
! Combined flux in latest and established models = 2.52583 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 43 components and 2.52583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126727Jy  sigma=1.833832
! Fit after  self-cal, rms=0.127063Jy  sigma=1.832026
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127063Jy  sigma=1.832026
! Fit after  self-cal, rms=0.125313Jy  sigma=1.818697
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.56 mas, bmaj=8.264 mas, bpa=0.3284 degrees
! Estimated noise=1.2572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0115179 Jy
! Component: 100  -  total flux cleaned = -0.0123182 Jy
! Component: 150  -  total flux cleaned = -0.0127256 Jy
! Component: 200  -  total flux cleaned = -0.0127159 Jy
! Total flux subtracted in 200 components = -0.0127159 Jy
! Clean residual min=-0.014178 max=0.013524 Jy/beam
! Clean residual mean=0.000006 rms=0.003266 Jy/beam
! Combined flux in latest and established models = 2.51311 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 2.51311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123649Jy  sigma=1.799410
! Fit after  self-cal, rms=0.123602Jy  sigma=1.798884
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000892069 Jy
! Component: 100  -  total flux cleaned = -0.000728286 Jy
! Component: 150  -  total flux cleaned = -0.000587529 Jy
! Component: 200  -  total flux cleaned = -0.000708571 Jy
! Total flux subtracted in 200 components = -0.000708571 Jy
! Clean residual min=-0.013608 max=0.013856 Jy/beam
! Clean residual mean=0.000007 rms=0.003214 Jy/beam
! Combined flux in latest and established models = 2.5124 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 2.5124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123032Jy  sigma=1.794464
! Fit after  self-cal, rms=0.122981Jy  sigma=1.793953
! Inverting map 
! Added new window around map position (6.5, -2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0099549 Jy
! Component: 100  -  total flux cleaned = 0.0124799 Jy
! Component: 150  -  total flux cleaned = 0.0129424 Jy
! Component: 200  -  total flux cleaned = 0.0131485 Jy
! Total flux subtracted in 200 components = 0.0131485 Jy
! Clean residual min=-0.012242 max=0.011422 Jy/beam
! Clean residual mean=0.000002 rms=0.002881 Jy/beam
! Combined flux in latest and established models = 2.52555 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 74 components and 2.52555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121097Jy  sigma=1.771492
! Fit after  self-cal, rms=0.120649Jy  sigma=1.766882
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120649Jy  sigma=1.766882
! Fit after  self-cal, rms=0.119920Jy  sigma=1.760660
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.562 mas, bmaj=8.268 mas, bpa=0.393 degrees
! Estimated noise=1.25748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00259935 Jy
! Component: 100  -  total flux cleaned = -0.00234973 Jy
! Component: 150  -  total flux cleaned = -0.00233725 Jy
! Component: 200  -  total flux cleaned = -0.00251325 Jy
! Total flux subtracted in 200 components = -0.00251325 Jy
! Clean residual min=-0.011657 max=0.010204 Jy/beam
! Clean residual mean=0.000001 rms=0.002518 Jy/beam
! Combined flux in latest and established models = 2.52304 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 2.52304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118677Jy  sigma=1.748917
! Fit after  self-cal, rms=0.118513Jy  sigma=1.747478
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00237776 Jy
! Component: 100  -  total flux cleaned = 0.00221168 Jy
! Component: 150  -  total flux cleaned = 0.00205884 Jy
! Component: 200  -  total flux cleaned = 0.00206027 Jy
! Total flux subtracted in 200 components = 0.00206027 Jy
! Clean residual min=-0.011177 max=0.009674 Jy/beam
! Clean residual mean=-0.000000 rms=0.002426 Jy/beam
! Combined flux in latest and established models = 2.5251 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 2.5251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117789Jy  sigma=1.742225
! Fit after  self-cal, rms=0.117669Jy  sigma=1.741363
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117669Jy  sigma=1.741363
! Fit after  self-cal, rms=0.117433Jy  sigma=1.738857
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.455 mas, bmaj=12.99 mas, bpa=6.869 degrees
! Estimated noise=1.32597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00329032 Jy
! Component: 100  -  total flux cleaned = -0.00415258 Jy
! Component: 150  -  total flux cleaned = -0.00462849 Jy
! Component: 200  -  total flux cleaned = -0.00471048 Jy
! Total flux subtracted in 200 components = -0.00471048 Jy
! Clean residual min=-0.009614 max=0.008273 Jy/beam
! Clean residual mean=0.000004 rms=0.002482 Jy/beam
! Combined flux in latest and established models = 2.52039 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 110 components and 2.52039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117308Jy  sigma=1.734243
! Fit after  self-cal, rms=0.117193Jy  sigma=1.733275
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000619562 Jy
! Component: 100  -  total flux cleaned = 0.000772951 Jy
! Component: 150  -  total flux cleaned = 0.00115669 Jy
! Component: 200  -  total flux cleaned = 0.00125313 Jy
! Total flux subtracted in 200 components = 0.00125313 Jy
! Clean residual min=-0.009701 max=0.008414 Jy/beam
! Clean residual mean=0.000003 rms=0.002474 Jy/beam
! Combined flux in latest and established models = 2.52164 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 2.52164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117098Jy  sigma=1.732248
! Fit after  self-cal, rms=0.117012Jy  sigma=1.731710
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.562 mas, bmaj=8.268 mas, bpa=0.41 degrees
! Estimated noise=1.25641 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.562 x 8.268 at 0.41 degrees (North through East)
! Clean map  min=-0.0096065  max=2.0984 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117012Jy  sigma=1.731710
! Fit after  self-cal, rms=0.112358Jy  sigma=1.586564
! Inverting map and beam 
! Estimated beam: bmin=3.563 mas, bmaj=8.271 mas, bpa=0.4276 degrees
! Estimated noise=1.25636 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00193154 Jy
! Component: 100  -  total flux cleaned = -0.00207775 Jy
! Component: 150  -  total flux cleaned = -0.00207316 Jy
! Component: 200  -  total flux cleaned = -0.00195382 Jy
! Total flux subtracted in 200 components = -0.00195382 Jy
! Clean residual min=-0.009819 max=0.008203 Jy/beam
! Clean residual mean=-0.000000 rms=0.002131 Jy/beam
! Combined flux in latest and established models = 2.51969 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 133 components and 2.51969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111759Jy  sigma=1.582642
! Fit after  self-cal, rms=0.111747Jy  sigma=1.582529
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000647203 Jy
! Component: 100  -  total flux cleaned = 0.000647725 Jy
! Component: 150  -  total flux cleaned = 0.000651605 Jy
! Component: 200  -  total flux cleaned = 0.000651612 Jy
! Total flux subtracted in 200 components = 0.000651612 Jy
! Clean residual min=-0.009610 max=0.007976 Jy/beam
! Clean residual mean=-0.000001 rms=0.002100 Jy/beam
! Combined flux in latest and established models = 2.52034 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 137 components and 2.52034 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111370Jy  sigma=1.580384
! Fit after  self-cal, rms=0.111346Jy  sigma=1.580273
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111346Jy  sigma=1.580273
! Fit after  self-cal, rms=0.111297Jy  sigma=1.579573
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.016 mas, bmaj=7.25 mas, bpa=0.543 degrees
! Estimated noise=1.60422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.60634 Jy
! Component: 100  -  total flux cleaned = 2.06787 Jy
! Component: 150  -  total flux cleaned = 2.27002 Jy
! Component: 200  -  total flux cleaned = 2.36644 Jy
! Total flux subtracted in 200 components = 2.36644 Jy
! Clean residual min=-0.023368 max=0.044409 Jy/beam
! Clean residual mean=0.000043 rms=0.007874 Jy/beam
! Combined flux in latest and established models = 2.36644 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 2.36644 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.563 mas, bmaj=8.271 mas, bpa=0.4386 degrees
! Estimated noise=1.25574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.06088 Jy
! Component: 100  -  total flux cleaned = 0.0914751 Jy
! Component: 150  -  total flux cleaned = 0.109691 Jy
! Component: 200  -  total flux cleaned = 0.121498 Jy
! Total flux subtracted in 200 components = 0.121498 Jy
! Clean residual min=-0.010688 max=0.008921 Jy/beam
! Clean residual mean=0.000018 rms=0.002518 Jy/beam
! Combined flux in latest and established models = 2.48794 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 67 components and 2.48794 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.464 mas, bmaj=13.01 mas, bpa=6.891 degrees
! Estimated noise=1.32411 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105617 Jy
! Component: 100  -  total flux cleaned = 0.0167613 Jy
! Component: 150  -  total flux cleaned = 0.0207367 Jy
! Component: 200  -  total flux cleaned = 0.0233627 Jy
! Total flux subtracted in 200 components = 0.0233627 Jy
! Clean residual min=-0.008943 max=0.007141 Jy/beam
! Clean residual mean=0.000008 rms=0.002248 Jy/beam
! Combined flux in latest and established models = 2.5113 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0017563 Jy
! Component: 100  -  total flux cleaned = 0.00228705 Jy
! Component: 150  -  total flux cleaned = 0.0026585 Jy
! Component: 200  -  total flux cleaned = 0.00295098 Jy
! Total flux subtracted in 200 components = 0.00295098 Jy
! Clean residual min=-0.008618 max=0.007299 Jy/beam
! Clean residual mean=0.000004 rms=0.002221 Jy/beam
! Combined flux in latest and established models = 2.51425 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 112 components and 2.51425 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.563 mas, bmaj=8.271 mas, bpa=0.4386 degrees
! Estimated noise=1.25574 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000820963 Jy
! Component: 100  -  total flux cleaned = -0.00082308 Jy
! Component: 150  -  total flux cleaned = -0.000673497 Jy
! Component: 200  -  total flux cleaned = -0.000404803 Jy
! Total flux subtracted in 200 components = -0.000404803 Jy
! Clean residual min=-0.008481 max=0.008043 Jy/beam
! Clean residual mean=0.000002 rms=0.002056 Jy/beam
! Combined flux in latest and established models = 2.51384 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 127 components and 2.51385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110242Jy  sigma=1.578356
! Fit after  self-cal, rms=0.110111Jy  sigma=1.577121
wmodel /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.mod
! Writing 127 model components to file: /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0339-0146_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0339-0146_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00239331 Jy
! Component: 100  -  total flux cleaned = -0.00365839 Jy
! Component: 150  -  total flux cleaned = -0.00469756 Jy
! Component: 200  -  total flux cleaned = -0.00603728 Jy
! Component: 250  -  total flux cleaned = -0.00673336 Jy
! Component: 300  -  total flux cleaned = -0.00750691 Jy
! Component: 350  -  total flux cleaned = -0.00835504 Jy
! Component: 400  -  total flux cleaned = -0.00876324 Jy
! Component: 450  -  total flux cleaned = -0.00915623 Jy
! Component: 500  -  total flux cleaned = -0.00953743 Jy
! Component: 550  -  total flux cleaned = -0.00963121 Jy
! Component: 600  -  total flux cleaned = -0.00972312 Jy
! Component: 650  -  total flux cleaned = -0.00998832 Jy
! Component: 700  -  total flux cleaned = -0.00998661 Jy
! Component: 750  -  total flux cleaned = -0.0102419 Jy
! Component: 800  -  total flux cleaned = -0.0105745 Jy
! Component: 850  -  total flux cleaned = -0.0107378 Jy
! Component: 900  -  total flux cleaned = -0.0108999 Jy
! Component: 950  -  total flux cleaned = -0.0112904 Jy
! Component: 1000  -  total flux cleaned = -0.0115185 Jy
! Component: 1050  -  total flux cleaned = -0.0115921 Jy
! Component: 1100  -  total flux cleaned = -0.0116653 Jy
! Component: 1150  -  total flux cleaned = -0.0113767 Jy
! Component: 1200  -  total flux cleaned = -0.01159 Jy
! Component: 1250  -  total flux cleaned = -0.0115197 Jy
! Component: 1300  -  total flux cleaned = -0.011793 Jy
! Component: 1350  -  total flux cleaned = -0.0118598 Jy
! Component: 1400  -  total flux cleaned = -0.012259 Jy
! Component: 1450  -  total flux cleaned = -0.0124557 Jy
! Component: 1500  -  total flux cleaned = -0.0125855 Jy
! Component: 1550  -  total flux cleaned = -0.0129044 Jy
! Component: 1600  -  total flux cleaned = -0.0132178 Jy
! Component: 1650  -  total flux cleaned = -0.0132189 Jy
! Component: 1700  -  total flux cleaned = -0.0136482 Jy
! Component: 1750  -  total flux cleaned = -0.0137683 Jy
! Component: 1800  -  total flux cleaned = -0.014007 Jy
! Component: 1850  -  total flux cleaned = -0.0140647 Jy
! Component: 1900  -  total flux cleaned = -0.0140068 Jy
! Component: 1950  -  total flux cleaned = -0.0141797 Jy
! Component: 2000  -  total flux cleaned = -0.0142926 Jy
! Component: 2050  -  total flux cleaned = -0.0145163 Jy
! Component: 2100  -  total flux cleaned = -0.0146275 Jy
! Component: 2150  -  total flux cleaned = -0.0149014 Jy
! Component: 2200  -  total flux cleaned = -0.0149009 Jy
! Component: 2250  -  total flux cleaned = -0.0153305 Jy
! Component: 2300  -  total flux cleaned = -0.0155428 Jy
! Component: 2350  -  total flux cleaned = -0.0156999 Jy
! Component: 2400  -  total flux cleaned = -0.0158555 Jy
! Component: 2450  -  total flux cleaned = -0.0162154 Jy
! Component: 2500  -  total flux cleaned = -0.0163167 Jy
! Component: 2550  -  total flux cleaned = -0.0166692 Jy
! Component: 2600  -  total flux cleaned = -0.0167193 Jy
! Component: 2650  -  total flux cleaned = -0.0169666 Jy
! Component: 2700  -  total flux cleaned = -0.0173095 Jy
! Component: 2750  -  total flux cleaned = -0.0176006 Jy
! Component: 2800  -  total flux cleaned = -0.0177446 Jy
! Component: 2850  -  total flux cleaned = -0.0178883 Jy
! Component: 2900  -  total flux cleaned = -0.0180302 Jy
! Component: 2950  -  total flux cleaned = -0.0182654 Jy
! Component: 3000  -  total flux cleaned = -0.0182185 Jy
! Component: 3050  -  total flux cleaned = -0.0184047 Jy
! Component: 3100  -  total flux cleaned = -0.0186816 Jy
! Component: 3150  -  total flux cleaned = -0.0188184 Jy
! Component: 3200  -  total flux cleaned = -0.018909 Jy
! Component: 3250  -  total flux cleaned = -0.0189094 Jy
! Component: 3300  -  total flux cleaned = -0.0191343 Jy
! Component: 3350  -  total flux cleaned = -0.0194473 Jy
! Component: 3400  -  total flux cleaned = -0.0196252 Jy
! Component: 3450  -  total flux cleaned = -0.0198018 Jy
! Component: 3500  -  total flux cleaned = -0.020153 Jy
! Component: 3550  -  total flux cleaned = -0.0201966 Jy
! Component: 3600  -  total flux cleaned = -0.0204577 Jy
! Component: 3650  -  total flux cleaned = -0.0207174 Jy
! Component: 3700  -  total flux cleaned = -0.0210184 Jy
! Component: 3750  -  total flux cleaned = -0.0212324 Jy
! Component: 3800  -  total flux cleaned = -0.0213176 Jy
! Component: 3850  -  total flux cleaned = -0.0216152 Jy
! Component: 3900  -  total flux cleaned = -0.0218269 Jy
! Component: 3950  -  total flux cleaned = -0.0220378 Jy
! Component: 4000  -  total flux cleaned = -0.0221643 Jy
! Component: 4050  -  total flux cleaned = -0.0224993 Jy
! Total flux subtracted in 4096 components = -0.0226664 Jy
! Clean residual min=-0.002459 max=0.002380 Jy/beam
! Clean residual mean=-0.000001 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 2.49118 Jy
keep
! Adding 245 model components to the UV plane model.
! The established model now contains 372 components and 2.49118 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0339-0146_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.563 x 8.271 at 0.4386 degrees (North through East)
! Clean map  min=-0.00571  max=2.1026 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0339-0146_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 2.10255 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00068523 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0977712 0.0977712 0.195542 0.391085 0.782169 1.56434 3.12868 6.25736 12.5147 25.0294 50.0588
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.002 
print "peak=",int(1000*peak_flux)/1000
! peak= 2.102 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0339-0146_S_uvs.log closed on Sat Oct  5 18:56:32 2013