! Started logfile: /g0/scr/pima/npcsb_uvs/J0300+8202_X_uvs.log on Sat Oct  5 18:51:15 2013
obs /g0/scr/pima/npcsb_uvs/J0300+8202_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_X_uva.fits
! AN table 1: 46 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.866667 visibilities/baseline/integration-bin.
! Found source: J0300+8202
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2392 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0300+8202_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.005770Jy  sigma=1.030115
! Fit after  self-cal, rms=0.924015Jy  sigma=0.880298
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.113 mas, bmaj=6.021 mas, bpa=37.79 degrees
! Estimated noise=41.8265 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0876826 Jy
! Component: 100  -  total flux cleaned = 0.119407 Jy
! Total flux subtracted in 100 components = 0.119407 Jy
! Clean residual min=-0.014949 max=0.014795 Jy/beam
! Clean residual mean=-0.000181 rms=0.006643 Jy/beam
! Combined flux in latest and established models = 0.119407 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.119407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078642Jy  sigma=0.081826
! Fit after  self-cal, rms=0.077183Jy  sigma=0.080929
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.322 mas, bmaj=6.181 mas, bpa=42.26 degrees
! Estimated noise=16.1787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00689244 Jy
! Component: 100  -  total flux cleaned = 0.00941158 Jy
! Component: 150  -  total flux cleaned = 0.0125948 Jy
! Component: 200  -  total flux cleaned = 0.0159758 Jy
! Total flux subtracted in 200 components = 0.0159758 Jy
! Clean residual min=-0.003284 max=0.003330 Jy/beam
! Clean residual mean=-0.000025 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 0.135383 Jy
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 121 components and 0.135383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076908Jy  sigma=0.072856
! Fit after  self-cal, rms=0.076741Jy  sigma=0.072634
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.96     KP        0.95     LA        0.95     
!   OV        0.89     PT        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     KP        0.96     LA        0.95     
!   OV        0.80     PT        0.92     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     KP        0.84     LA        0.89     
!   OV        0.89     PT        0.92     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.94     KP        0.85     LA        0.85     
!   OV        0.87     PT        0.93     
! 
! 
! Fit before self-cal, rms=0.076741Jy  sigma=0.072634
! Fit after  self-cal, rms=0.070095Jy  sigma=0.068385
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.309 mas, bmaj=6.117 mas, bpa=41.98 degrees
! Estimated noise=13.4871 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0121537 Jy
! Component: 100  -  total flux cleaned = -0.0109495 Jy
! Component: 150  -  total flux cleaned = -0.0109696 Jy
! Component: 200  -  total flux cleaned = -0.0104364 Jy
! Total flux subtracted in 200 components = -0.0104364 Jy
! Clean residual min=-0.001595 max=0.001605 Jy/beam
! Clean residual mean=-0.000002 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.124946 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 161 components and 0.124946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063890Jy  sigma=0.070103
! Fit after  self-cal, rms=0.063813Jy  sigma=0.070015
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063813Jy  sigma=0.070015
! Fit after  self-cal, rms=0.059699Jy  sigma=0.067936
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.28 mas, bmaj=6.043 mas, bpa=42.05 degrees
! Estimated noise=11.6818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0101793 Jy
! Component: 100  -  total flux cleaned = -0.0112489 Jy
! Component: 150  -  total flux cleaned = -0.0111798 Jy
! Component: 200  -  total flux cleaned = -0.0114159 Jy
! Total flux subtracted in 200 components = -0.0114159 Jy
! Clean residual min=-0.001235 max=0.001238 Jy/beam
! Clean residual mean=-0.000000 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.113531 Jy
selfcal
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 198 components and 0.113531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054620Jy  sigma=0.069755
! Fit after  self-cal, rms=0.054572Jy  sigma=0.069706
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00013855 Jy
! Component: 100  -  total flux cleaned = -0.000285629 Jy
! Component: 150  -  total flux cleaned = -0.000416594 Jy
! Component: 200  -  total flux cleaned = -0.000416574 Jy
! Total flux subtracted in 200 components = -0.000416574 Jy
! Clean residual min=-0.000970 max=0.000969 Jy/beam
! Clean residual mean=0.000001 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.113114 Jy
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 236 components and 0.113114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054248Jy  sigma=0.069664
! Fit after  self-cal, rms=0.054229Jy  sigma=0.069640
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054229Jy  sigma=0.069640
! Fit after  self-cal, rms=0.050607Jy  sigma=0.067338
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.25 mas, bmaj=5.963 mas, bpa=42.3 degrees
! Estimated noise=10.065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0083669 Jy
! Component: 100  -  total flux cleaned = -0.00986929 Jy
! Component: 150  -  total flux cleaned = -0.00992849 Jy
! Component: 200  -  total flux cleaned = -0.0102672 Jy
! Total flux subtracted in 200 components = -0.0102672 Jy
! Clean residual min=-0.000901 max=0.000902 Jy/beam
! Clean residual mean=-0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.102847 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 267 components and 0.102847 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046518Jy  sigma=0.069244
! Fit after  self-cal, rms=0.046497Jy  sigma=0.069198
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000787912 Jy
! Component: 100  -  total flux cleaned = -0.00129327 Jy
! Component: 150  -  total flux cleaned = -0.00129271 Jy
! Component: 200  -  total flux cleaned = -0.00146456 Jy
! Total flux subtracted in 200 components = -0.00146456 Jy
! Clean residual min=-0.000703 max=0.000703 Jy/beam
! Clean residual mean=0.000001 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.101382 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 315 components and 0.101382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046279Jy  sigma=0.069235
! Fit after  self-cal, rms=0.046256Jy  sigma=0.069198
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046256Jy  sigma=0.069198
! Fit after  self-cal, rms=0.043344Jy  sigma=0.066886
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.489 mas, bmaj=6.136 mas, bpa=39.98 degrees
! Estimated noise=8.59214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00726346 Jy
! Component: 100  -  total flux cleaned = -0.00825167 Jy
! Component: 150  -  total flux cleaned = -0.00810392 Jy
! Component: 200  -  total flux cleaned = -0.00814398 Jy
! Total flux subtracted in 200 components = -0.00814398 Jy
! Clean residual min=-0.000684 max=0.000686 Jy/beam
! Clean residual mean=-0.000003 rms=0.000269 Jy/beam
! Combined flux in latest and established models = 0.0932382 Jy
selfcal
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 350 components and 0.0932382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039895Jy  sigma=0.068808
! Fit after  self-cal, rms=0.039882Jy  sigma=0.068758
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000568999 Jy
! Component: 100  -  total flux cleaned = -0.000607901 Jy
! Component: 150  -  total flux cleaned = -0.000640282 Jy
! Component: 200  -  total flux cleaned = -0.000640281 Jy
! Total flux subtracted in 200 components = -0.000640281 Jy
! Clean residual min=-0.000494 max=0.000494 Jy/beam
! Clean residual mean=-0.000000 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.0925979 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 397 components and 0.0925979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039681Jy  sigma=0.068889
! Fit after  self-cal, rms=0.039677Jy  sigma=0.068876
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.223 mas, bmaj=5.891 mas, bpa=42.57 degrees
! Estimated noise=8.66105 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.223 x 5.891 at 42.57 degrees (North through East)
! Clean map  min=-0.0027354  max=0.046911 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.024 mas, bmaj=5.748 mas, bpa=37.28 degrees
! Estimated noise=22.5863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0481479 Jy
! Component: 100  -  total flux cleaned = 0.0675256 Jy
! Component: 150  -  total flux cleaned = 0.0773118 Jy
! Component: 200  -  total flux cleaned = 0.0822891 Jy
! Total flux subtracted in 200 components = 0.0822891 Jy
! Clean residual min=-0.005370 max=0.005368 Jy/beam
! Clean residual mean=-0.000060 rms=0.002505 Jy/beam
! Combined flux in latest and established models = 0.082289 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 95 model components to the UV plane model.
! The established model now contains 95 components and 0.082289 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.223 mas, bmaj=5.891 mas, bpa=42.57 degrees
! Estimated noise=8.66105 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.18848e-05 Jy
! Component: 100  -  total flux cleaned = 0.00110962 Jy
! Component: 150  -  total flux cleaned = 0.00125555 Jy
! Component: 200  -  total flux cleaned = 0.00135131 Jy
! Total flux subtracted in 200 components = 0.00135131 Jy
! Clean residual min=-0.001735 max=0.001719 Jy/beam
! Clean residual mean=-0.000010 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.0836404 Jy
! Adding 82 model components to the UV plane model.
! The established model now contains 177 components and 0.0836403 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.489 mas, bmaj=6.136 mas, bpa=39.98 degrees
! Estimated noise=8.59214 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000467429 Jy
! Component: 100  -  total flux cleaned = -0.000402948 Jy
! Component: 150  -  total flux cleaned = -0.000479864 Jy
! Component: 200  -  total flux cleaned = -0.000135469 Jy
! Total flux subtracted in 200 components = -0.000135469 Jy
! Clean residual min=-0.001097 max=0.001098 Jy/beam
! Clean residual mean=-0.000003 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.0835049 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.38992e-05 Jy
! Component: 100  -  total flux cleaned = -0.000125272 Jy
! Component: 150  -  total flux cleaned = -0.000304526 Jy
! Component: 200  -  total flux cleaned = -0.000421816 Jy
! Total flux subtracted in 200 components = -0.000421816 Jy
! Clean residual min=-0.000960 max=0.000962 Jy/beam
! Clean residual mean=0.000002 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.083083 Jy
! Adding 80 model components to the UV plane model.
! The established model now contains 249 components and 0.083083 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.223 mas, bmaj=5.891 mas, bpa=42.57 degrees
! Estimated noise=8.66105 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.7013e-06 Jy
! Component: 100  -  total flux cleaned = -5.33933e-05 Jy
! Component: 150  -  total flux cleaned = 8.25024e-05 Jy
! Component: 200  -  total flux cleaned = 0.000206247 Jy
! Total flux subtracted in 200 components = 0.000206247 Jy
! Clean residual min=-0.000673 max=0.000674 Jy/beam
! Clean residual mean=-0.000001 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0832893 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 302 components and 0.0832893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039646Jy  sigma=0.069554
! Fit after  self-cal, rms=0.039643Jy  sigma=0.069451
wmodel /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.mod
! Writing 302 model components to file: /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0300+8202_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_X_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsb_uvs/J0300+8202_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.223 x 5.891 at 42.57 degrees (North through East)
! Clean map  min=-0.0027009  max=0.042673 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0426726 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000245521 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.72608 1.72608 3.45216 6.90433 13.8087 27.6173 55.2346
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.042 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0300+8202_X_uvs.log closed on Sat Oct  5 18:51:17 2013