! Started logfile: /g0/scr/pima/npcsb_uvs/J0300+8202_S_uvs.log on Sat Oct  5 18:56:18 2013
obs /g0/scr/pima/npcsb_uvs/J0300+8202_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J0300+8202
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7728 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0300+8202_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.067649Jy  sigma=3.205041
! Fit after  self-cal, rms=0.769439Jy  sigma=1.385324
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.287 mas, bmaj=10.28 mas, bpa=2.346 degrees
! Estimated noise=11.0195 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.278496 Jy
! Component: 100  -  total flux cleaned = 0.405103 Jy
! Total flux subtracted in 100 components = 0.405103 Jy
! Clean residual min=-0.054008 max=0.077617 Jy/beam
! Clean residual mean=0.000197 rms=0.022186 Jy/beam
! Combined flux in latest and established models = 0.405103 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.405103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201480Jy  sigma=0.873193
! Fit after  self-cal, rms=0.201849Jy  sigma=0.871602
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.751 mas, bmaj=12.2 mas, bpa=2.328 degrees
! Estimated noise=3.60971 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.134069 Jy
! Component: 100  -  total flux cleaned = 0.204402 Jy
! Component: 150  -  total flux cleaned = 0.242869 Jy
! Component: 200  -  total flux cleaned = 0.2649 Jy
! Total flux subtracted in 200 components = 0.2649 Jy
! Clean residual min=-0.045084 max=0.080451 Jy/beam
! Clean residual mean=0.000214 rms=0.017327 Jy/beam
! Combined flux in latest and established models = 0.670003 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 86 components and 0.670003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178361Jy  sigma=0.530956
! Fit after  self-cal, rms=0.177836Jy  sigma=0.527630
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.77     FD        1.13     HN        0.98     KP        0.86     
!   LA        1.05     MK        1.05     NL        1.59     OV        0.93     
!   PT        1.01     SC        0.76     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.16     HN        0.91     KP        0.87     
!   LA        1.00     MK        1.10     NL        1.50     OV        0.93     
!   PT        0.96     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.23     HN        0.85     KP        0.92     
!   LA        0.81     MK        1.10     NL        1.52     OV        1.04     
!   PT        1.08     SC        1.06     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.24     HN        0.78     KP        0.86     
!   LA        0.70     MK        1.11     NL        1.50     OV        0.88     
!   PT        0.94     SC        1.19     
! 
! 
! Fit before self-cal, rms=0.177836Jy  sigma=0.527630
! Fit after  self-cal, rms=0.163959Jy  sigma=0.388494
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.854 mas, bmaj=12.22 mas, bpa=1.71 degrees
! Estimated noise=3.48014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0208844 Jy
! Component: 100  -  total flux cleaned = -0.0240214 Jy
! Component: 150  -  total flux cleaned = -0.0250443 Jy
! Component: 200  -  total flux cleaned = -0.0250515 Jy
! Total flux subtracted in 200 components = -0.0250515 Jy
! Clean residual min=-0.028105 max=0.055289 Jy/beam
! Clean residual mean=0.000048 rms=0.012047 Jy/beam
! Combined flux in latest and established models = 0.644952 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 0.644952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158584Jy  sigma=0.390943
! Fit after  self-cal, rms=0.159951Jy  sigma=0.389612
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159951Jy  sigma=0.389612
! Fit after  self-cal, rms=0.156980Jy  sigma=0.383151
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.815 mas, bmaj=12.26 mas, bpa=1.847 degrees
! Estimated noise=3.33949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.019117 Jy
! Component: 100  -  total flux cleaned = -0.0236006 Jy
! Component: 150  -  total flux cleaned = -0.0236096 Jy
! Component: 200  -  total flux cleaned = -0.0238369 Jy
! Total flux subtracted in 200 components = -0.0238369 Jy
! Clean residual min=-0.026172 max=0.051982 Jy/beam
! Clean residual mean=0.000048 rms=0.011405 Jy/beam
! Combined flux in latest and established models = 0.621115 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 0.621115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152172Jy  sigma=0.387165
! Fit after  self-cal, rms=0.152614Jy  sigma=0.386425
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-42, -116).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0476073 Jy
! Component: 100  -  total flux cleaned = 0.0586325 Jy
! Component: 150  -  total flux cleaned = 0.0642935 Jy
! Component: 200  -  total flux cleaned = 0.0660747 Jy
! Total flux subtracted in 200 components = 0.0660747 Jy
! Clean residual min=-0.022789 max=0.033495 Jy/beam
! Clean residual mean=0.000063 rms=0.009386 Jy/beam
! Combined flux in latest and established models = 0.68719 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 132 components and 0.687189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136575Jy  sigma=0.335933
! Fit after  self-cal, rms=0.129702Jy  sigma=0.314722
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129702Jy  sigma=0.314722
! Fit after  self-cal, rms=0.124800Jy  sigma=0.302798
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.877 mas, bmaj=12.16 mas, bpa=2.012 degrees
! Estimated noise=3.22845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118366 Jy
! Component: 100  -  total flux cleaned = 0.0155081 Jy
! Component: 150  -  total flux cleaned = 0.0171397 Jy
! Component: 200  -  total flux cleaned = 0.0179962 Jy
! Total flux subtracted in 200 components = 0.0179962 Jy
! Clean residual min=-0.018281 max=0.023738 Jy/beam
! Clean residual mean=0.000045 rms=0.006284 Jy/beam
! Combined flux in latest and established models = 0.705186 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 157 components and 0.705186 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116589Jy  sigma=0.283574
! Fit after  self-cal, rms=0.114272Jy  sigma=0.275570
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0100594 Jy
! Component: 100  -  total flux cleaned = 0.0116741 Jy
! Component: 150  -  total flux cleaned = 0.0123017 Jy
! Component: 200  -  total flux cleaned = 0.011017 Jy
! Total flux subtracted in 200 components = 0.011017 Jy
! Clean residual min=-0.016996 max=0.019461 Jy/beam
! Clean residual mean=0.000023 rms=0.005347 Jy/beam
! Combined flux in latest and established models = 0.716203 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 175 components and 0.716203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111222Jy  sigma=0.268758
! Fit after  self-cal, rms=0.110280Jy  sigma=0.265992
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110280Jy  sigma=0.265992
! Fit after  self-cal, rms=0.109380Jy  sigma=0.259625
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.03 mas, bmaj=15.32 mas, bpa=15.57 degrees
! Estimated noise=2.64281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00240819 Jy
! Component: 100  -  total flux cleaned = 0.00275453 Jy
! Component: 150  -  total flux cleaned = 0.00204304 Jy
! Component: 200  -  total flux cleaned = 0.000835712 Jy
! Total flux subtracted in 200 components = 0.000835712 Jy
! Clean residual min=-0.016086 max=0.020664 Jy/beam
! Clean residual mean=0.000033 rms=0.005544 Jy/beam
! Combined flux in latest and established models = 0.717039 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 207 components and 0.717039 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107903Jy  sigma=0.255864
! Fit after  self-cal, rms=0.107443Jy  sigma=0.254109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0050226 Jy
! Component: 100  -  total flux cleaned = 0.00560307 Jy
! Component: 150  -  total flux cleaned = 0.00500155 Jy
! Component: 200  -  total flux cleaned = 0.00474868 Jy
! Total flux subtracted in 200 components = 0.00474868 Jy
! Clean residual min=-0.015197 max=0.019804 Jy/beam
! Clean residual mean=0.000023 rms=0.005188 Jy/beam
! Combined flux in latest and established models = 0.721787 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 239 components and 0.721787 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106944Jy  sigma=0.252559
! Fit after  self-cal, rms=0.106723Jy  sigma=0.251785
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.915 mas, bmaj=12.17 mas, bpa=2.234 degrees
! Estimated noise=3.1795 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.915 x 12.17 at 2.234 degrees (North through East)
! Clean map  min=-0.013279  max=0.34373 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.378 mas, bmaj=10.11 mas, bpa=1.732 degrees
! Estimated noise=9.8903 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.244575 Jy
! Component: 100  -  total flux cleaned = 0.363731 Jy
! Component: 150  -  total flux cleaned = 0.446561 Jy
! Component: 200  -  total flux cleaned = 0.506644 Jy
! Total flux subtracted in 200 components = 0.506644 Jy
! Clean residual min=-0.028604 max=0.041243 Jy/beam
! Clean residual mean=0.000110 rms=0.011281 Jy/beam
! Combined flux in latest and established models = 0.506644 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 71 model components to the UV plane model.
! The established model now contains 71 components and 0.506644 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.915 mas, bmaj=12.17 mas, bpa=2.234 degrees
! Estimated noise=3.1795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0689178 Jy
! Component: 100  -  total flux cleaned = 0.111704 Jy
! Component: 150  -  total flux cleaned = 0.14077 Jy
! Component: 200  -  total flux cleaned = 0.161258 Jy
! Total flux subtracted in 200 components = 0.161258 Jy
! Clean residual min=-0.018739 max=0.020025 Jy/beam
! Clean residual mean=0.000086 rms=0.005899 Jy/beam
! Combined flux in latest and established models = 0.667902 Jy
! Adding 108 model components to the UV plane model.
! The established model now contains 161 components and 0.667902 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.03 mas, bmaj=15.32 mas, bpa=15.57 degrees
! Estimated noise=2.64281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197945 Jy
! Component: 100  -  total flux cleaned = 0.0324177 Jy
! Component: 150  -  total flux cleaned = 0.0406531 Jy
! Component: 200  -  total flux cleaned = 0.0438784 Jy
! Total flux subtracted in 200 components = 0.0438784 Jy
! Clean residual min=-0.016072 max=0.018744 Jy/beam
! Clean residual mean=0.000038 rms=0.005533 Jy/beam
! Combined flux in latest and established models = 0.71178 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158262 Jy
! Component: 100  -  total flux cleaned = 0.00257344 Jy
! Component: 150  -  total flux cleaned = 0.00342527 Jy
! Component: 200  -  total flux cleaned = 0.0040449 Jy
! Total flux subtracted in 200 components = 0.0040449 Jy
! Clean residual min=-0.015255 max=0.019313 Jy/beam
! Clean residual mean=0.000029 rms=0.005323 Jy/beam
! Combined flux in latest and established models = 0.715825 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 207 components and 0.715825 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.915 mas, bmaj=12.17 mas, bpa=2.234 degrees
! Estimated noise=3.1795 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00140429 Jy
! Component: 100  -  total flux cleaned = -0.00115081 Jy
! Component: 150  -  total flux cleaned = -0.00103856 Jy
! Component: 200  -  total flux cleaned = -0.00114407 Jy
! Total flux subtracted in 200 components = -0.00114407 Jy
! Clean residual min=-0.013387 max=0.015169 Jy/beam
! Clean residual mean=0.000012 rms=0.004090 Jy/beam
! Combined flux in latest and established models = 0.714681 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 227 components and 0.714681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104910Jy  sigma=0.252677
! Fit after  self-cal, rms=0.104313Jy  sigma=0.251085
wmodel /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.mod
! Writing 227 model components to file: /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0300+8202_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00441907 Jy
! Component: 100  -  total flux cleaned = 0.00610748 Jy
! Component: 150  -  total flux cleaned = 0.00705973 Jy
! Component: 200  -  total flux cleaned = 0.00775409 Jy
! Component: 250  -  total flux cleaned = 0.00790971 Jy
! Component: 300  -  total flux cleaned = 0.00703557 Jy
! Component: 350  -  total flux cleaned = 0.00622498 Jy
! Component: 400  -  total flux cleaned = 0.00545933 Jy
! Component: 450  -  total flux cleaned = 0.00473321 Jy
! Component: 500  -  total flux cleaned = 0.00473306 Jy
! Component: 550  -  total flux cleaned = 0.00451529 Jy
! Component: 600  -  total flux cleaned = 0.00410013 Jy
! Component: 650  -  total flux cleaned = 0.00359804 Jy
! Component: 700  -  total flux cleaned = 0.00311615 Jy
! Component: 750  -  total flux cleaned = 0.00255835 Jy
! Component: 800  -  total flux cleaned = 0.0021996 Jy
! Component: 850  -  total flux cleaned = 0.00193919 Jy
! Component: 900  -  total flux cleaned = 0.00185413 Jy
! Component: 950  -  total flux cleaned = 0.00169019 Jy
! Component: 1000  -  total flux cleaned = 0.0017724 Jy
! Component: 1050  -  total flux cleaned = 0.0020094 Jy
! Component: 1100  -  total flux cleaned = 0.00216342 Jy
! Component: 1150  -  total flux cleaned = 0.00246275 Jy
! Component: 1200  -  total flux cleaned = 0.00268075 Jy
! Component: 1250  -  total flux cleaned = 0.00289443 Jy
! Component: 1300  -  total flux cleaned = 0.00303482 Jy
! Component: 1350  -  total flux cleaned = 0.00330863 Jy
! Component: 1400  -  total flux cleaned = 0.00357683 Jy
! Component: 1450  -  total flux cleaned = 0.00370626 Jy
! Component: 1500  -  total flux cleaned = 0.00383479 Jy
! Component: 1550  -  total flux cleaned = 0.00415227 Jy
! Component: 1600  -  total flux cleaned = 0.00427606 Jy
! Component: 1650  -  total flux cleaned = 0.00439912 Jy
! Component: 1700  -  total flux cleaned = 0.00464024 Jy
! Component: 1750  -  total flux cleaned = 0.00475884 Jy
! Component: 1800  -  total flux cleaned = 0.00475986 Jy
! Component: 1850  -  total flux cleaned = 0.00493292 Jy
! Component: 1900  -  total flux cleaned = 0.00515872 Jy
! Component: 1950  -  total flux cleaned = 0.00521364 Jy
! Component: 2000  -  total flux cleaned = 0.00526821 Jy
! Component: 2050  -  total flux cleaned = 0.00526851 Jy
! Component: 2100  -  total flux cleaned = 0.0054285 Jy
! Component: 2150  -  total flux cleaned = 0.00548108 Jy
! Component: 2200  -  total flux cleaned = 0.00542866 Jy
! Component: 2250  -  total flux cleaned = 0.00548024 Jy
! Component: 2300  -  total flux cleaned = 0.00553089 Jy
! Component: 2350  -  total flux cleaned = 0.00553109 Jy
! Component: 2400  -  total flux cleaned = 0.0058263 Jy
! Component: 2450  -  total flux cleaned = 0.00592277 Jy
! Component: 2500  -  total flux cleaned = 0.00611474 Jy
! Component: 2550  -  total flux cleaned = 0.00616167 Jy
! Component: 2600  -  total flux cleaned = 0.006209 Jy
! Component: 2650  -  total flux cleaned = 0.00630162 Jy
! Component: 2700  -  total flux cleaned = 0.00630127 Jy
! Component: 2750  -  total flux cleaned = 0.00634684 Jy
! Component: 2800  -  total flux cleaned = 0.0064372 Jy
! Component: 2850  -  total flux cleaned = 0.00643712 Jy
! Component: 2900  -  total flux cleaned = 0.00661379 Jy
! Component: 2950  -  total flux cleaned = 0.00661288 Jy
! Component: 3000  -  total flux cleaned = 0.00661312 Jy
! Component: 3050  -  total flux cleaned = 0.00665618 Jy
! Component: 3100  -  total flux cleaned = 0.00674135 Jy
! Component: 3150  -  total flux cleaned = 0.00682584 Jy
! Component: 3200  -  total flux cleaned = 0.00682606 Jy
! Component: 3250  -  total flux cleaned = 0.0066603 Jy
! Component: 3300  -  total flux cleaned = 0.00678382 Jy
! Component: 3350  -  total flux cleaned = 0.0068242 Jy
! Component: 3400  -  total flux cleaned = 0.00678377 Jy
! Component: 3450  -  total flux cleaned = 0.0068243 Jy
! Component: 3500  -  total flux cleaned = 0.0068241 Jy
! Component: 3550  -  total flux cleaned = 0.00690318 Jy
! Component: 3600  -  total flux cleaned = 0.00686396 Jy
! Component: 3650  -  total flux cleaned = 0.00698106 Jy
! Component: 3700  -  total flux cleaned = 0.00713605 Jy
! Component: 3750  -  total flux cleaned = 0.0071744 Jy
! Component: 3800  -  total flux cleaned = 0.00725097 Jy
! Component: 3850  -  total flux cleaned = 0.00744084 Jy
! Component: 3900  -  total flux cleaned = 0.0076294 Jy
! Component: 3950  -  total flux cleaned = 0.00774183 Jy
! Component: 4000  -  total flux cleaned = 0.00781651 Jy
! Component: 4050  -  total flux cleaned = 0.00800162 Jy
! Total flux subtracted in 4096 components = 0.00822217 Jy
! Clean residual min=-0.001866 max=0.001979 Jy/beam
! Clean residual mean=0.000006 rms=0.000705 Jy/beam
! Combined flux in latest and established models = 0.722903 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 548 components and 0.722903 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0300+8202_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.915 x 12.17 at 2.234 degrees (North through East)
! Clean map  min=-0.007175  max=0.34465 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0300+8202_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.344646 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000704519 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.613255 0.613255 1.22651 2.45302 4.90604 9.81208 19.6242 39.2483 78.4966
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0021 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.344 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0300+8202_S_uvs.log closed on Sat Oct  5 18:56:22 2013