! Started logfile: /g0/scr/pima/npcsb_uvs/J0205+7522_X_uvs.log on Sat Oct 5 18:51:05 2013 obs /g0/scr/pima/npcsb_uvs/J0205+7522_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0205+7522_X_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.545154 visibilities/baseline/integration-bin. ! Found source: J0205+7522 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4612 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0205+7522_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.010794Jy sigma=1.384140 ! Fit after self-cal, rms=0.891451Jy sigma=1.079389 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7826 mas, bmaj=2.549 mas, bpa=0.9564 degrees ! Estimated noise=21.527 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939335 Jy ! Component: 100 - total flux cleaned = 0.127804 Jy ! Total flux subtracted in 100 components = 0.127804 Jy ! Clean residual min=-0.014255 max=0.028203 Jy/beam ! Clean residual mean=-0.000006 rms=0.005160 Jy/beam ! Combined flux in latest and established models = 0.127804 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.127804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099268Jy sigma=0.180275 ! Fit after self-cal, rms=0.098792Jy sigma=0.180055 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.174 mas, bmaj=2.951 mas, bpa=1.804 degrees ! Estimated noise=9.0154 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0506091 Jy ! Component: 100 - total flux cleaned = 0.076562 Jy ! Component: 150 - total flux cleaned = 0.09087 Jy ! Component: 200 - total flux cleaned = 0.0987906 Jy ! Total flux subtracted in 200 components = 0.0987906 Jy ! Clean residual min=-0.018383 max=0.027647 Jy/beam ! Clean residual mean=-0.000037 rms=0.007000 Jy/beam ! Combined flux in latest and established models = 0.226595 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 48 components and 0.226595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094260Jy sigma=0.121923 ! Fit after self-cal, rms=0.094062Jy sigma=0.121616 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.61 HN 0.87 KP 1.02 ! LA 0.90 MK 0.91 NL 0.89 OV 1.35 ! PT 0.86 SC 0.79 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.42 HN 0.78 KP 0.90 ! LA 0.88 MK 0.77 NL 1.04 OV 1.33 ! PT 0.90 SC 0.78 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.21 HN 0.72 KP 0.73 ! LA 0.85 MK 0.82 NL 1.21 OV 1.04 ! PT 0.93 SC 0.57 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.18 HN 0.74 KP 0.80 ! LA 0.84 MK 1.01 NL 1.48 OV 1.02 ! PT 1.00 SC 0.54 ! ! ! Fit before self-cal, rms=0.094062Jy sigma=0.121616 ! Fit after self-cal, rms=0.086326Jy sigma=0.099182 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.098 mas, bmaj=2.978 mas, bpa=2.268 degrees ! Estimated noise=7.88145 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.2, 13.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000924498 Jy ! Component: 100 - total flux cleaned = 0.00244698 Jy ! Component: 150 - total flux cleaned = 0.00156644 Jy ! Component: 200 - total flux cleaned = 0.000677818 Jy ! Total flux subtracted in 200 components = 0.000677818 Jy ! Clean residual min=-0.006287 max=0.009308 Jy/beam ! Clean residual mean=0.000003 rms=0.001862 Jy/beam ! Combined flux in latest and established models = 0.227272 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 69 components and 0.227272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080457Jy sigma=0.099133 ! Fit after self-cal, rms=0.080588Jy sigma=0.098431 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080588Jy sigma=0.098431 ! Fit after self-cal, rms=0.077000Jy sigma=0.096118 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.072 mas, bmaj=2.954 mas, bpa=2.228 degrees ! Estimated noise=7.17056 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00858085 Jy ! Component: 100 - total flux cleaned = -0.00708821 Jy ! Component: 150 - total flux cleaned = -0.00705255 Jy ! Component: 200 - total flux cleaned = -0.00748922 Jy ! Total flux subtracted in 200 components = -0.00748922 Jy ! Clean residual min=-0.005234 max=0.006818 Jy/beam ! Clean residual mean=0.000001 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.219783 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.219783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072304Jy sigma=0.097998 ! Fit after self-cal, rms=0.072192Jy sigma=0.097815 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502564 Jy ! Component: 100 - total flux cleaned = 0.00668566 Jy ! Component: 150 - total flux cleaned = 0.00784088 Jy ! Component: 200 - total flux cleaned = 0.00818035 Jy ! Total flux subtracted in 200 components = 0.00818035 Jy ! Clean residual min=-0.004555 max=0.004010 Jy/beam ! Clean residual mean=0.000005 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.227963 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.227964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070794Jy sigma=0.096739 ! Fit after self-cal, rms=0.070635Jy sigma=0.096579 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070635Jy sigma=0.096579 ! Fit after self-cal, rms=0.066500Jy sigma=0.094656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.033 mas, bmaj=2.925 mas, bpa=2.221 degrees ! Estimated noise=6.47369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00789762 Jy ! Component: 100 - total flux cleaned = -0.00690938 Jy ! Component: 150 - total flux cleaned = -0.00581902 Jy ! Component: 200 - total flux cleaned = -0.00482237 Jy ! Total flux subtracted in 200 components = -0.00482237 Jy ! Clean residual min=-0.003807 max=0.003465 Jy/beam ! Clean residual mean=0.000002 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.223141 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 119 components and 0.223141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062064Jy sigma=0.095983 ! Fit after self-cal, rms=0.061882Jy sigma=0.095818 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000744936 Jy ! Component: 100 - total flux cleaned = 0.0011894 Jy ! Component: 150 - total flux cleaned = 0.001267 Jy ! Component: 200 - total flux cleaned = 0.00133657 Jy ! Total flux subtracted in 200 components = 0.00133657 Jy ! Clean residual min=-0.003518 max=0.003625 Jy/beam ! Clean residual mean=0.000005 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.224478 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 131 components and 0.224478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061219Jy sigma=0.095726 ! Fit after self-cal, rms=0.061177Jy sigma=0.095680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061177Jy sigma=0.095680 ! Fit after self-cal, rms=0.057868Jy sigma=0.093755 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=3.601 mas, bpa=22.43 degrees ! Estimated noise=6.55486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00724392 Jy ! Component: 100 - total flux cleaned = -0.00711224 Jy ! Component: 150 - total flux cleaned = -0.0070871 Jy ! Component: 200 - total flux cleaned = -0.00709125 Jy ! Total flux subtracted in 200 components = -0.00709125 Jy ! Clean residual min=-0.003735 max=0.003515 Jy/beam ! Clean residual mean=0.000002 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.217386 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 145 components and 0.217386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054164Jy sigma=0.095678 ! Fit after self-cal, rms=0.054032Jy sigma=0.095498 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312347 Jy ! Component: 100 - total flux cleaned = 0.000183255 Jy ! Component: 150 - total flux cleaned = 0.000393587 Jy ! Component: 200 - total flux cleaned = 0.00053959 Jy ! Total flux subtracted in 200 components = 0.00053959 Jy ! Clean residual min=-0.003406 max=0.003595 Jy/beam ! Clean residual mean=0.000004 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.217926 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 156 components and 0.217926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053613Jy sigma=0.095646 ! Fit after self-cal, rms=0.053594Jy sigma=0.095600 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9909 mas, bmaj=2.897 mas, bpa=2.091 degrees ! Estimated noise=5.79032 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9909 x 2.897 at 2.091 degrees (North through East) ! Clean map min=-0.0028527 max=0.096754 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7069 mas, bmaj=2.603 mas, bpa=1.551 degrees ! Estimated noise=11.5436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0509865 Jy ! Component: 100 - total flux cleaned = 0.0786078 Jy ! Component: 150 - total flux cleaned = 0.0971586 Jy ! Component: 200 - total flux cleaned = 0.110671 Jy ! Total flux subtracted in 200 components = 0.110671 Jy ! Clean residual min=-0.007664 max=0.011347 Jy/beam ! Clean residual mean=0.000000 rms=0.002419 Jy/beam ! Combined flux in latest and established models = 0.110671 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.110671 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9909 mas, bmaj=2.897 mas, bpa=2.091 degrees ! Estimated noise=5.79032 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0311368 Jy ! Component: 100 - total flux cleaned = 0.0493931 Jy ! Component: 150 - total flux cleaned = 0.0618391 Jy ! Component: 200 - total flux cleaned = 0.0713093 Jy ! Total flux subtracted in 200 components = 0.0713093 Jy ! Clean residual min=-0.006672 max=0.008203 Jy/beam ! Clean residual mean=-0.000008 rms=0.002577 Jy/beam ! Combined flux in latest and established models = 0.181981 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 72 components and 0.181981 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=3.601 mas, bpa=22.43 degrees ! Estimated noise=6.55486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114038 Jy ! Component: 100 - total flux cleaned = 0.0185494 Jy ! Component: 150 - total flux cleaned = 0.0237012 Jy ! Component: 200 - total flux cleaned = 0.0275363 Jy ! Total flux subtracted in 200 components = 0.0275363 Jy ! Clean residual min=-0.004548 max=0.004719 Jy/beam ! Clean residual mean=-0.000002 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.209517 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293493 Jy ! Component: 100 - total flux cleaned = 0.00519821 Jy ! Component: 150 - total flux cleaned = 0.00682514 Jy ! Component: 200 - total flux cleaned = 0.00751769 Jy ! Total flux subtracted in 200 components = 0.00751769 Jy ! Clean residual min=-0.004020 max=0.003505 Jy/beam ! Clean residual mean=0.000002 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.217035 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 124 components and 0.217035 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9909 mas, bmaj=2.897 mas, bpa=2.091 degrees ! Estimated noise=5.79032 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000556141 Jy ! Component: 100 - total flux cleaned = 0.000816393 Jy ! Component: 150 - total flux cleaned = 0.00089519 Jy ! Component: 200 - total flux cleaned = 0.00104045 Jy ! Total flux subtracted in 200 components = 0.00104045 Jy ! Clean residual min=-0.003285 max=0.002880 Jy/beam ! Clean residual mean=0.000002 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.218075 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 141 components and 0.218075 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053347Jy sigma=0.096568 ! Fit after self-cal, rms=0.053257Jy sigma=0.096247 wmodel /g0/scr/pima/npcsb_uvs/J0205+7522_X_map.mod ! Writing 141 model components to file: /g0/scr/pima/npcsb_uvs/J0205+7522_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0205+7522_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0205+7522_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0205+7522_X_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0205+7522_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000742146 Jy ! Component: 100 - total flux cleaned = -0.00114201 Jy ! Component: 150 - total flux cleaned = -0.00155756 Jy ! Component: 200 - total flux cleaned = -0.00164323 Jy ! Component: 250 - total flux cleaned = -0.00184645 Jy ! Component: 300 - total flux cleaned = -0.00180654 Jy ! Component: 350 - total flux cleaned = -0.00184331 Jy ! Component: 400 - total flux cleaned = -0.00180803 Jy ! Component: 450 - total flux cleaned = -0.00177302 Jy ! Component: 500 - total flux cleaned = -0.00177313 Jy ! Component: 550 - total flux cleaned = -0.00190462 Jy ! Component: 600 - total flux cleaned = -0.00196838 Jy ! Component: 650 - total flux cleaned = -0.0020617 Jy ! Component: 700 - total flux cleaned = -0.00215321 Jy ! Component: 750 - total flux cleaned = -0.00230209 Jy ! Component: 800 - total flux cleaned = -0.00236006 Jy ! Component: 850 - total flux cleaned = -0.00241716 Jy ! Component: 900 - total flux cleaned = -0.00250044 Jy ! Component: 950 - total flux cleaned = -0.0026375 Jy ! Component: 1000 - total flux cleaned = -0.00269074 Jy ! Component: 1050 - total flux cleaned = -0.00277011 Jy ! Component: 1100 - total flux cleaned = -0.00282198 Jy ! Component: 1150 - total flux cleaned = -0.00287331 Jy ! Component: 1200 - total flux cleaned = -0.00287334 Jy ! Component: 1250 - total flux cleaned = -0.00284844 Jy ! Component: 1300 - total flux cleaned = -0.00284835 Jy ! Component: 1350 - total flux cleaned = -0.00277664 Jy ! Component: 1400 - total flux cleaned = -0.00275244 Jy ! Component: 1450 - total flux cleaned = -0.0027056 Jy ! Component: 1500 - total flux cleaned = -0.00261334 Jy ! Component: 1550 - total flux cleaned = -0.00252291 Jy ! Component: 1600 - total flux cleaned = -0.00250066 Jy ! Component: 1650 - total flux cleaned = -0.00236883 Jy ! Component: 1700 - total flux cleaned = -0.00236922 Jy ! Component: 1750 - total flux cleaned = -0.00224084 Jy ! Component: 1800 - total flux cleaned = -0.00226165 Jy ! Component: 1850 - total flux cleaned = -0.00217768 Jy ! Component: 1900 - total flux cleaned = -0.00217719 Jy ! Component: 1950 - total flux cleaned = -0.00209598 Jy ! Component: 2000 - total flux cleaned = -0.00209618 Jy ! Component: 2050 - total flux cleaned = -0.00207662 Jy ! Component: 2100 - total flux cleaned = -0.00207641 Jy ! Component: 2150 - total flux cleaned = -0.00211466 Jy ! Component: 2200 - total flux cleaned = -0.0020953 Jy ! Component: 2250 - total flux cleaned = -0.00213314 Jy ! Component: 2300 - total flux cleaned = -0.00213324 Jy ! Component: 2350 - total flux cleaned = -0.00217026 Jy ! Component: 2400 - total flux cleaned = -0.00213342 Jy ! Component: 2450 - total flux cleaned = -0.00213338 Jy ! Component: 2500 - total flux cleaned = -0.00222317 Jy ! Component: 2550 - total flux cleaned = -0.00220502 Jy ! Component: 2600 - total flux cleaned = -0.00222283 Jy ! Component: 2650 - total flux cleaned = -0.00229273 Jy ! Component: 2700 - total flux cleaned = -0.00225832 Jy ! Component: 2750 - total flux cleaned = -0.00230991 Jy ! Component: 2800 - total flux cleaned = -0.00237774 Jy ! Component: 2850 - total flux cleaned = -0.00232721 Jy ! Component: 2900 - total flux cleaned = -0.00236075 Jy ! Component: 2950 - total flux cleaned = -0.00242683 Jy ! Component: 3000 - total flux cleaned = -0.00244336 Jy ! Component: 3050 - total flux cleaned = -0.00237844 Jy ! Component: 3100 - total flux cleaned = -0.00239453 Jy ! Component: 3150 - total flux cleaned = -0.00237857 Jy ! Component: 3200 - total flux cleaned = -0.00234678 Jy ! Component: 3250 - total flux cleaned = -0.0023467 Jy ! Component: 3300 - total flux cleaned = -0.00228393 Jy ! Component: 3350 - total flux cleaned = -0.00234645 Jy ! Component: 3400 - total flux cleaned = -0.0022999 Jy ! Component: 3450 - total flux cleaned = -0.00233065 Jy ! Component: 3500 - total flux cleaned = -0.00228464 Jy ! Component: 3550 - total flux cleaned = -0.0022694 Jy ! Component: 3600 - total flux cleaned = -0.00226951 Jy ! Component: 3650 - total flux cleaned = -0.00231478 Jy ! Component: 3700 - total flux cleaned = -0.00228475 Jy ! Component: 3750 - total flux cleaned = -0.00232961 Jy ! Component: 3800 - total flux cleaned = -0.00232949 Jy ! Component: 3850 - total flux cleaned = -0.0023294 Jy ! Component: 3900 - total flux cleaned = -0.00229992 Jy ! Component: 3950 - total flux cleaned = -0.00229994 Jy ! Component: 4000 - total flux cleaned = -0.00225619 Jy ! Component: 4050 - total flux cleaned = -0.00219816 Jy ! Total flux subtracted in 4096 components = -0.00221259 Jy ! Clean residual min=-0.000824 max=0.001029 Jy/beam ! Clean residual mean=-0.000001 rms=0.000250 Jy/beam ! Combined flux in latest and established models = 0.215863 Jy keep ! Adding 268 model components to the UV plane model. ! The established model now contains 407 components and 0.215862 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0205+7522_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9909 x 2.897 at 2.091 degrees (North through East) ! Clean map min=-0.0023644 max=0.092714 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0205+7522_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0927141 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000251469 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.813693 0.813693 1.62739 3.25477 6.50954 13.0191 26.0382 52.0764 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0205+7522_X_uvs.log closed on Sat Oct 5 18:51:09 2013