! Started logfile: /g0/scr/pima/npcsb_uvs/J0202+8115_X_uvs.log on Sat Oct 5 18:51:00 2013 obs /g0/scr/pima/npcsb_uvs/J0202+8115_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_X_uva.fits ! AN table 1: 45 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.761905 visibilities/baseline/integration-bin. ! Found source: J0202+8115 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2880 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0202+8115_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002943Jy sigma=0.769410 ! Fit after self-cal, rms=0.953346Jy sigma=0.700575 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.256 mas, bmaj=5.913 mas, bpa=46.73 degrees ! Estimated noise=35.2247 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0547636 Jy ! Component: 100 - total flux cleaned = 0.0666241 Jy ! Total flux subtracted in 100 components = 0.0666241 Jy ! Clean residual min=-0.008095 max=0.007277 Jy/beam ! Clean residual mean=-0.000034 rms=0.002160 Jy/beam ! Combined flux in latest and established models = 0.0666241 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0666241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073512Jy sigma=0.060427 ! Fit after self-cal, rms=0.072422Jy sigma=0.059448 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=6.13 mas, bpa=45.46 degrees ! Estimated noise=19.9682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00639778 Jy ! Component: 100 - total flux cleaned = 0.00864287 Jy ! Component: 150 - total flux cleaned = 0.00913998 Jy ! Component: 200 - total flux cleaned = 0.00913784 Jy ! Total flux subtracted in 200 components = 0.00913784 Jy ! Clean residual min=-0.004155 max=0.004921 Jy/beam ! Clean residual mean=0.000000 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 0.0757619 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.0757619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073871Jy sigma=0.057749 ! Fit after self-cal, rms=0.073819Jy sigma=0.057722 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.88 KP 0.86 LA 0.86 ! NL 1.00* OV 0.92 PT 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.93 KP 0.80 LA 0.81 ! NL 1.00* OV 0.91 PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.84 KP 0.78 LA 0.87 ! NL 1.00* OV 0.95 PT 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.81 KP 0.83 LA 0.94 ! NL 1.00* OV 0.84 PT 1.01 ! ! ! Fit before self-cal, rms=0.073819Jy sigma=0.057722 ! Fit after self-cal, rms=0.063927Jy sigma=0.054972 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.489 mas, bmaj=6.071 mas, bpa=45.85 degrees ! Estimated noise=15.5427 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0119175 Jy ! Component: 100 - total flux cleaned = -0.0134423 Jy ! Component: 150 - total flux cleaned = -0.0136875 Jy ! Component: 200 - total flux cleaned = -0.0136281 Jy ! Total flux subtracted in 200 components = -0.0136281 Jy ! Clean residual min=-0.002344 max=0.002371 Jy/beam ! Clean residual mean=-0.000003 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0621338 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 51 components and 0.0621337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057642Jy sigma=0.056847 ! Fit after self-cal, rms=0.057686Jy sigma=0.056788 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057686Jy sigma=0.056788 ! Fit after self-cal, rms=0.050981Jy sigma=0.054840 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.484 mas, bmaj=6.059 mas, bpa=45.89 degrees ! Estimated noise=12.3912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00944454 Jy ! Component: 100 - total flux cleaned = -0.0115126 Jy ! Component: 150 - total flux cleaned = -0.0117833 Jy ! Component: 200 - total flux cleaned = -0.0117103 Jy ! Total flux subtracted in 200 components = -0.0117103 Jy ! Clean residual min=-0.001904 max=0.001901 Jy/beam ! Clean residual mean=-0.000002 rms=0.000487 Jy/beam ! Combined flux in latest and established models = 0.0504235 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.0504235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046019Jy sigma=0.056746 ! Fit after self-cal, rms=0.046022Jy sigma=0.056735 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000108444 Jy ! Component: 100 - total flux cleaned = -8.98191e-05 Jy ! Component: 150 - total flux cleaned = -3.73575e-05 Jy ! Component: 200 - total flux cleaned = 8.35664e-06 Jy ! Total flux subtracted in 200 components = 8.35664e-06 Jy ! Clean residual min=-0.001923 max=0.001820 Jy/beam ! Clean residual mean=-0.000002 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0504318 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 74 components and 0.0504318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045984Jy sigma=0.056744 ! Fit after self-cal, rms=0.045984Jy sigma=0.056738 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045984Jy sigma=0.056738 ! Fit after self-cal, rms=0.040519Jy sigma=0.054779 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.482 mas, bmaj=6.047 mas, bpa=45.8 degrees ! Estimated noise=9.85765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00745753 Jy ! Component: 100 - total flux cleaned = -0.00910778 Jy ! Component: 150 - total flux cleaned = -0.00971264 Jy ! Component: 200 - total flux cleaned = -0.0097631 Jy ! Total flux subtracted in 200 components = -0.0097631 Jy ! Clean residual min=-0.001480 max=0.001465 Jy/beam ! Clean residual mean=-0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0406687 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 0.0406687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.036596Jy sigma=0.056694 ! Fit after self-cal, rms=0.036599Jy sigma=0.056683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.66596e-05 Jy ! Component: 100 - total flux cleaned = -2.16787e-05 Jy ! Component: 150 - total flux cleaned = 2.18955e-05 Jy ! Component: 200 - total flux cleaned = 4.14487e-05 Jy ! Total flux subtracted in 200 components = 4.14487e-05 Jy ! Clean residual min=-0.001499 max=0.001379 Jy/beam ! Clean residual mean=-0.000001 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.0407102 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 104 components and 0.0407102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.036566Jy sigma=0.056712 ! Fit after self-cal, rms=0.036569Jy sigma=0.056709 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.036569Jy sigma=0.056709 ! Fit after self-cal, rms=0.032213Jy sigma=0.054743 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=6.082 mas, bpa=43.64 degrees ! Estimated noise=7.99856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00595227 Jy ! Component: 100 - total flux cleaned = -0.00732309 Jy ! Component: 150 - total flux cleaned = -0.00790491 Jy ! Component: 200 - total flux cleaned = -0.00806408 Jy ! Total flux subtracted in 200 components = -0.00806408 Jy ! Clean residual min=-0.001112 max=0.001004 Jy/beam ! Clean residual mean=-0.000001 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.0326461 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 109 components and 0.0326461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.029104Jy sigma=0.056654 ! Fit after self-cal, rms=0.029105Jy sigma=0.056643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.19561e-05 Jy ! Component: 100 - total flux cleaned = 2.27754e-05 Jy ! Component: 150 - total flux cleaned = 4.9536e-05 Jy ! Component: 200 - total flux cleaned = 6.75572e-05 Jy ! Total flux subtracted in 200 components = 6.75572e-05 Jy ! Clean residual min=-0.001143 max=0.000966 Jy/beam ! Clean residual mean=-0.000001 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.0327136 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 124 components and 0.0327136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.029071Jy sigma=0.056693 ! Fit after self-cal, rms=0.029073Jy sigma=0.056691 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=6.035 mas, bpa=45.72 degrees ! Estimated noise=7.83847 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.48 x 6.035 at 45.72 degrees (North through East) ! Clean map min=-0.0011985 max=0.02879 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.239 mas, bmaj=5.84 mas, bpa=46.95 degrees ! Estimated noise=13.8999 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0219228 Jy ! Component: 100 - total flux cleaned = 0.0270634 Jy ! Component: 150 - total flux cleaned = 0.0292302 Jy ! Component: 200 - total flux cleaned = 0.0303171 Jy ! Total flux subtracted in 200 components = 0.0303171 Jy ! Clean residual min=-0.002765 max=0.002429 Jy/beam ! Clean residual mean=-0.000013 rms=0.000753 Jy/beam ! Combined flux in latest and established models = 0.0303171 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0303171 Jy ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=6.035 mas, bpa=45.72 degrees ! Estimated noise=7.83847 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123621 Jy ! Component: 100 - total flux cleaned = 0.00157401 Jy ! Component: 150 - total flux cleaned = 0.00180099 Jy ! Component: 200 - total flux cleaned = 0.00201561 Jy ! Total flux subtracted in 200 components = 0.00201561 Jy ! Clean residual min=-0.001460 max=0.001306 Jy/beam ! Clean residual mean=-0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0323327 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 65 components and 0.0323327 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=6.082 mas, bpa=43.64 degrees ! Estimated noise=7.99856 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183726 Jy ! Component: 100 - total flux cleaned = 0.000228492 Jy ! Component: 150 - total flux cleaned = 0.000266491 Jy ! Component: 200 - total flux cleaned = 0.000298103 Jy ! Total flux subtracted in 200 components = 0.000298103 Jy ! Clean residual min=-0.001295 max=0.001021 Jy/beam ! Clean residual mean=-0.000002 rms=0.000308 Jy/beam ! Combined flux in latest and established models = 0.0326308 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.36013e-05 Jy ! Component: 100 - total flux cleaned = 2.57125e-05 Jy ! Component: 150 - total flux cleaned = 3.60632e-05 Jy ! Component: 200 - total flux cleaned = 4.49038e-05 Jy ! Total flux subtracted in 200 components = 4.49038e-05 Jy ! Clean residual min=-0.001233 max=0.000956 Jy/beam ! Clean residual mean=-0.000002 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.0326758 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 97 components and 0.0326758 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.48 mas, bmaj=6.035 mas, bpa=45.72 degrees ! Estimated noise=7.83847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.89867e-05 Jy ! Component: 100 - total flux cleaned = -3.76298e-05 Jy ! Component: 150 - total flux cleaned = -2.0783e-05 Jy ! Component: 200 - total flux cleaned = -5.27586e-06 Jy ! Total flux subtracted in 200 components = -5.27586e-06 Jy ! Clean residual min=-0.001242 max=0.001039 Jy/beam ! Clean residual mean=-0.000001 rms=0.000291 Jy/beam ! Combined flux in latest and established models = 0.0326705 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 109 components and 0.0326705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.029018Jy sigma=0.056806 ! Fit after self-cal, rms=0.029016Jy sigma=0.056803 wmodel /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.mod ! Writing 109 model components to file: /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.mod wobs /g0/scr/pima/npcsb_uvs/J0202+8115_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_X_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107256 Jy ! Component: 100 - total flux cleaned = 0.000148976 Jy ! Component: 150 - total flux cleaned = 0.000350795 Jy ! Component: 200 - total flux cleaned = 0.000480017 Jy ! Component: 250 - total flux cleaned = 0.000601176 Jy ! Component: 300 - total flux cleaned = 0.000741957 Jy ! Component: 350 - total flux cleaned = 0.000875898 Jy ! Component: 400 - total flux cleaned = 0.000934063 Jy ! Component: 450 - total flux cleaned = 0.00100147 Jy ! Component: 500 - total flux cleaned = 0.00108786 Jy ! Component: 550 - total flux cleaned = 0.00120294 Jy ! Component: 600 - total flux cleaned = 0.00133504 Jy ! Component: 650 - total flux cleaned = 0.00145351 Jy ! Component: 700 - total flux cleaned = 0.00157875 Jy ! Component: 750 - total flux cleaned = 0.00168232 Jy ! Component: 800 - total flux cleaned = 0.00178365 Jy ! Component: 850 - total flux cleaned = 0.00188307 Jy ! Component: 900 - total flux cleaned = 0.00199842 Jy ! Component: 950 - total flux cleaned = 0.00209422 Jy ! Component: 1000 - total flux cleaned = 0.00218854 Jy ! Component: 1050 - total flux cleaned = 0.00230667 Jy ! Component: 1100 - total flux cleaned = 0.00241458 Jy ! Component: 1150 - total flux cleaned = 0.00252095 Jy ! Component: 1200 - total flux cleaned = 0.0026258 Jy ! Component: 1250 - total flux cleaned = 0.00272917 Jy ! Component: 1300 - total flux cleaned = 0.00276837 Jy ! Component: 1350 - total flux cleaned = 0.00282279 Jy ! Component: 1400 - total flux cleaned = 0.00286905 Jy ! Component: 1450 - total flux cleaned = 0.00293014 Jy ! Component: 1500 - total flux cleaned = 0.00296797 Jy ! Component: 1550 - total flux cleaned = 0.00301302 Jy ! Component: 1600 - total flux cleaned = 0.00307252 Jy ! Component: 1650 - total flux cleaned = 0.00313166 Jy ! Component: 1700 - total flux cleaned = 0.00317569 Jy ! Component: 1750 - total flux cleaned = 0.00323403 Jy ! Component: 1800 - total flux cleaned = 0.00329194 Jy ! Component: 1850 - total flux cleaned = 0.00334937 Jy ! Component: 1900 - total flux cleaned = 0.0033921 Jy ! Component: 1950 - total flux cleaned = 0.00343467 Jy ! Component: 2000 - total flux cleaned = 0.00347703 Jy ! Component: 2050 - total flux cleaned = 0.00351913 Jy ! Component: 2100 - total flux cleaned = 0.00355404 Jy ! Component: 2150 - total flux cleaned = 0.00358184 Jy ! Component: 2200 - total flux cleaned = 0.00363036 Jy ! Component: 2250 - total flux cleaned = 0.00366486 Jy ! Component: 2300 - total flux cleaned = 0.00369919 Jy ! Component: 2350 - total flux cleaned = 0.00374711 Jy ! Component: 2400 - total flux cleaned = 0.00380168 Jy ! Component: 2450 - total flux cleaned = 0.00384249 Jy ! Component: 2500 - total flux cleaned = 0.00389003 Jy ! Component: 2550 - total flux cleaned = 0.00394421 Jy ! Component: 2600 - total flux cleaned = 0.00397123 Jy ! Component: 2650 - total flux cleaned = 0.00400494 Jy ! Component: 2700 - total flux cleaned = 0.00405213 Jy ! Component: 2750 - total flux cleaned = 0.00407904 Jy ! Component: 2800 - total flux cleaned = 0.00411935 Jy ! Component: 2850 - total flux cleaned = 0.00415293 Jy ! Component: 2900 - total flux cleaned = 0.00418651 Jy ! Component: 2950 - total flux cleaned = 0.00423338 Jy ! Component: 3000 - total flux cleaned = 0.00425346 Jy ! Component: 3050 - total flux cleaned = 0.00429363 Jy ! Component: 3100 - total flux cleaned = 0.004307 Jy ! Component: 3150 - total flux cleaned = 0.00434046 Jy ! Component: 3200 - total flux cleaned = 0.00436721 Jy ! Component: 3250 - total flux cleaned = 0.00439394 Jy ! Component: 3300 - total flux cleaned = 0.00442738 Jy ! Component: 3350 - total flux cleaned = 0.00444745 Jy ! Component: 3400 - total flux cleaned = 0.0044809 Jy ! Component: 3450 - total flux cleaned = 0.00451438 Jy ! Component: 3500 - total flux cleaned = 0.00452777 Jy ! Component: 3550 - total flux cleaned = 0.00456127 Jy ! Component: 3600 - total flux cleaned = 0.00458807 Jy ! Component: 3650 - total flux cleaned = 0.00460824 Jy ! Component: 3700 - total flux cleaned = 0.00464182 Jy ! Component: 3750 - total flux cleaned = 0.00465529 Jy ! Component: 3800 - total flux cleaned = 0.00468898 Jy ! Component: 3850 - total flux cleaned = 0.00471595 Jy ! Component: 3900 - total flux cleaned = 0.00474974 Jy ! Component: 3950 - total flux cleaned = 0.00478359 Jy ! Component: 4000 - total flux cleaned = 0.00481069 Jy ! Component: 4050 - total flux cleaned = 0.00485149 Jy ! Total flux subtracted in 4096 components = 0.00488557 Jy ! Clean residual min=-0.000446 max=0.000386 Jy/beam ! Clean residual mean=0.000003 rms=0.000121 Jy/beam ! Combined flux in latest and established models = 0.0375561 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 343 components and 0.037556 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0202+8115_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.48 x 6.035 at 45.72 degrees (North through East) ! Clean map min=-0.0010772 max=0.028616 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.028616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000116033 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21645 1.21645 2.4329 4.8658 9.7316 19.4632 38.9264 77.8528 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.028 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0202+8115_X_uvs.log closed on Sat Oct 5 18:51:04 2013