! Started logfile: /g0/scr/pima/npcsb_uvs/J0202+8115_S_uvs.log on Sat Oct  5 18:55:58 2013
obs /g0/scr/pima/npcsb_uvs/J0202+8115_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_S_uva.fits
! AN table 1: 45 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.638889 visibilities/baseline/integration-bin.
! Found source: J0202+8115
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 4140 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0202+8115_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005274Jy  sigma=0.785603
! Fit after  self-cal, rms=0.949552Jy  sigma=0.704156
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.046 mas, bmaj=11.58 mas, bpa=9.032 degrees
! Estimated noise=32.7995 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.066581 Jy
! Component: 100  -  total flux cleaned = 0.083879 Jy
! Total flux subtracted in 100 components = 0.083879 Jy
! Clean residual min=-0.014736 max=0.011695 Jy/beam
! Clean residual mean=-0.000028 rms=0.004236 Jy/beam
! Combined flux in latest and established models = 0.083879 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.083879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084325Jy  sigma=0.072196
! Fit after  self-cal, rms=0.082562Jy  sigma=0.071138
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.288 mas, bmaj=12.32 mas, bpa=10.27 degrees
! Estimated noise=16.2378 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268743 Jy
! Component: 100  -  total flux cleaned = 0.00420377 Jy
! Component: 150  -  total flux cleaned = 0.00475711 Jy
! Component: 200  -  total flux cleaned = 0.00490699 Jy
! Total flux subtracted in 200 components = 0.00490699 Jy
! Clean residual min=-0.007094 max=0.005818 Jy/beam
! Clean residual mean=-0.000018 rms=0.001811 Jy/beam
! Combined flux in latest and established models = 0.088786 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 40 components and 0.088786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083146Jy  sigma=0.070619
! Fit after  self-cal, rms=0.083135Jy  sigma=0.070610
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.86     KP        0.99     LA        0.92     
!   MK        0.66     NL        0.90     OV        0.96     PT        1.12     
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.85     KP        0.87     LA        1.05     
!   MK        0.83     NL        0.99     OV        0.92     PT        0.92     
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.93     KP        0.93     LA        0.68     
!   MK        0.83     NL        1.15     OV        1.01     PT        0.99     
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.92     KP        0.79     LA        0.52     
!   MK        0.85     NL        1.02     OV        0.74     PT        0.97     
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.083135Jy  sigma=0.070610
! Fit after  self-cal, rms=0.071748Jy  sigma=0.064984
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.148 mas, bmaj=12.56 mas, bpa=10.7 degrees
! Estimated noise=12.6964 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0135347 Jy
! Component: 100  -  total flux cleaned = -0.0172051 Jy
! Component: 150  -  total flux cleaned = -0.0188965 Jy
! Component: 200  -  total flux cleaned = -0.0198166 Jy
! Total flux subtracted in 200 components = -0.0198166 Jy
! Clean residual min=-0.002794 max=0.003526 Jy/beam
! Clean residual mean=-0.000009 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.0689694 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 62 components and 0.0689694 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064642Jy  sigma=0.067358
! Fit after  self-cal, rms=0.065023Jy  sigma=0.067012
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.065023Jy  sigma=0.067012
! Fit after  self-cal, rms=0.057549Jy  sigma=0.064395
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.15 mas, bmaj=12.68 mas, bpa=10.8 degrees
! Estimated noise=10.073 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0106849 Jy
! Component: 100  -  total flux cleaned = -0.0133228 Jy
! Component: 150  -  total flux cleaned = -0.0145037 Jy
! Component: 200  -  total flux cleaned = -0.0151697 Jy
! Total flux subtracted in 200 components = -0.0151697 Jy
! Clean residual min=-0.002225 max=0.002635 Jy/beam
! Clean residual mean=-0.000008 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.0537997 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 76 components and 0.0537997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052034Jy  sigma=0.066811
! Fit after  self-cal, rms=0.052117Jy  sigma=0.066796
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-85.5, 48.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233958 Jy
! Component: 100  -  total flux cleaned = 0.00314045 Jy
! Component: 150  -  total flux cleaned = 0.00344082 Jy
! Component: 200  -  total flux cleaned = 0.00364414 Jy
! Total flux subtracted in 200 components = 0.00364414 Jy
! Clean residual min=-0.002019 max=0.001580 Jy/beam
! Clean residual mean=-0.000005 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.0574438 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 99 components and 0.0574438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051982Jy  sigma=0.066651
! Fit after  self-cal, rms=0.051875Jy  sigma=0.066546
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051875Jy  sigma=0.066546
! Fit after  self-cal, rms=0.045329Jy  sigma=0.063929
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.189 mas, bmaj=12.75 mas, bpa=10.93 degrees
! Estimated noise=7.92529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00843885 Jy
! Component: 100  -  total flux cleaned = -0.00993411 Jy
! Component: 150  -  total flux cleaned = -0.00989139 Jy
! Component: 200  -  total flux cleaned = -0.0098603 Jy
! Total flux subtracted in 200 components = -0.0098603 Jy
! Clean residual min=-0.001497 max=0.001220 Jy/beam
! Clean residual mean=-0.000006 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.0475835 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 121 components and 0.0475835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041045Jy  sigma=0.066187
! Fit after  self-cal, rms=0.041037Jy  sigma=0.066166
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000714327 Jy
! Component: 100  -  total flux cleaned = 0.000817545 Jy
! Component: 150  -  total flux cleaned = 0.000774846 Jy
! Component: 200  -  total flux cleaned = 0.000720509 Jy
! Total flux subtracted in 200 components = 0.000720509 Jy
! Clean residual min=-0.001460 max=0.001170 Jy/beam
! Clean residual mean=-0.000005 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.048304 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 144 components and 0.048304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040987Jy  sigma=0.066188
! Fit after  self-cal, rms=0.040962Jy  sigma=0.066177
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040962Jy  sigma=0.066177
! Fit after  self-cal, rms=0.035888Jy  sigma=0.063717
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.744 mas, bmaj=14.03 mas, bpa=19.35 degrees
! Estimated noise=6.57091 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00675541 Jy
! Component: 100  -  total flux cleaned = -0.00823681 Jy
! Component: 150  -  total flux cleaned = -0.0086948 Jy
! Component: 200  -  total flux cleaned = -0.00895245 Jy
! Total flux subtracted in 200 components = -0.00895245 Jy
! Clean residual min=-0.001076 max=0.000861 Jy/beam
! Clean residual mean=-0.000006 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.0393516 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 161 components and 0.0393516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.032480Jy  sigma=0.066128
! Fit after  self-cal, rms=0.032448Jy  sigma=0.066091
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.4691e-05 Jy
! Component: 100  -  total flux cleaned = -3.58903e-05 Jy
! Component: 150  -  total flux cleaned = -5.28901e-05 Jy
! Component: 200  -  total flux cleaned = -3.79983e-05 Jy
! Total flux subtracted in 200 components = -3.79983e-05 Jy
! Clean residual min=-0.000990 max=0.000837 Jy/beam
! Clean residual mean=-0.000005 rms=0.000243 Jy/beam
! Combined flux in latest and established models = 0.0393136 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 179 components and 0.0393136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.032425Jy  sigma=0.066132
! Fit after  self-cal, rms=0.032418Jy  sigma=0.066130
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.227 mas, bmaj=12.77 mas, bpa=11.08 degrees
! Estimated noise=6.27449 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.227 x 12.77 at 11.08 degrees (North through East)
! Clean map  min=-0.0010261  max=0.030677 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.929 mas, bmaj=12.01 mas, bpa=9.428 degrees
! Estimated noise=12.9827 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0265068 Jy
! Component: 100  -  total flux cleaned = 0.0337842 Jy
! Component: 150  -  total flux cleaned = 0.0385262 Jy
! Component: 200  -  total flux cleaned = 0.0414547 Jy
! Total flux subtracted in 200 components = 0.0414547 Jy
! Clean residual min=-0.004529 max=0.004127 Jy/beam
! Clean residual mean=-0.000003 rms=0.001499 Jy/beam
! Combined flux in latest and established models = 0.0414547 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0414547 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.227 mas, bmaj=12.77 mas, bpa=11.08 degrees
! Estimated noise=6.27449 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-85.5, 29).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00077889 Jy
! Component: 100  -  total flux cleaned = 0.000114048 Jy
! Component: 150  -  total flux cleaned = -0.000202906 Jy
! Component: 200  -  total flux cleaned = -0.000559629 Jy
! Total flux subtracted in 200 components = -0.000559629 Jy
! Clean residual min=-0.001311 max=0.001207 Jy/beam
! Clean residual mean=-0.000004 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.0408951 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 67 components and 0.0408951 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.744 mas, bmaj=14.03 mas, bpa=19.35 degrees
! Estimated noise=6.57091 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108528 Jy
! Component: 100  -  total flux cleaned = -0.000431219 Jy
! Component: 150  -  total flux cleaned = -0.000684662 Jy
! Component: 200  -  total flux cleaned = -0.00090266 Jy
! Total flux subtracted in 200 components = -0.00090266 Jy
! Clean residual min=-0.001151 max=0.000917 Jy/beam
! Clean residual mean=-0.000004 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.0399924 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.58758e-05 Jy
! Component: 100  -  total flux cleaned = -0.000181965 Jy
! Component: 150  -  total flux cleaned = -0.000246676 Jy
! Component: 200  -  total flux cleaned = -0.000316976 Jy
! Total flux subtracted in 200 components = -0.000316976 Jy
! Clean residual min=-0.001078 max=0.000894 Jy/beam
! Clean residual mean=-0.000004 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0396755 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 124 components and 0.0396755 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.227 mas, bmaj=12.77 mas, bpa=11.08 degrees
! Estimated noise=6.27449 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.04788e-06 Jy
! Component: 100  -  total flux cleaned = -0.000115861 Jy
! Component: 150  -  total flux cleaned = -0.000236965 Jy
! Component: 200  -  total flux cleaned = -0.000311634 Jy
! Total flux subtracted in 200 components = -0.000311634 Jy
! Clean residual min=-0.001146 max=0.001039 Jy/beam
! Clean residual mean=-0.000003 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.0393638 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 151 components and 0.0393638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.032441Jy  sigma=0.066192
! Fit after  self-cal, rms=0.032416Jy  sigma=0.066178
wmodel /g0/scr/pima/npcsb_uvs/J0202+8115_S_map.mod
! Writing 151 model components to file: /g0/scr/pima/npcsb_uvs/J0202+8115_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0202+8115_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0202+8115_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsb_uvs/J0202+8115_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141548 Jy
! Component: 100  -  total flux cleaned = -0.000126745 Jy
! Component: 150  -  total flux cleaned = -5.47969e-05 Jy
! Component: 200  -  total flux cleaned = -1.684e-06 Jy
! Component: 250  -  total flux cleaned = 8.62465e-05 Jy
! Component: 300  -  total flux cleaned = 0.000146354 Jy
! Component: 350  -  total flux cleaned = 0.000180704 Jy
! Component: 400  -  total flux cleaned = 0.000225052 Jy
! Component: 450  -  total flux cleaned = 0.000236118 Jy
! Component: 500  -  total flux cleaned = 0.000287443 Jy
! Component: 550  -  total flux cleaned = 0.000347164 Jy
! Component: 600  -  total flux cleaned = 0.000356645 Jy
! Component: 650  -  total flux cleaned = 0.000347299 Jy
! Component: 700  -  total flux cleaned = 0.000337945 Jy
! Component: 750  -  total flux cleaned = 0.000311003 Jy
! Component: 800  -  total flux cleaned = 0.000275754 Jy
! Component: 850  -  total flux cleaned = 0.000223787 Jy
! Component: 900  -  total flux cleaned = 0.000164424 Jy
! Component: 950  -  total flux cleaned = 0.000106128 Jy
! Component: 1000  -  total flux cleaned = 4.87231e-05 Jy
! Component: 1050  -  total flux cleaned = -4.80039e-05 Jy
! Component: 1100  -  total flux cleaned = -0.000103699 Jy
! Component: 1150  -  total flux cleaned = -0.000213758 Jy
! Component: 1200  -  total flux cleaned = -0.000330093 Jy
! Component: 1250  -  total flux cleaned = -0.000437412 Jy
! Component: 1300  -  total flux cleaned = -0.000528289 Jy
! Component: 1350  -  total flux cleaned = -0.000655646 Jy
! Component: 1400  -  total flux cleaned = -0.000751868 Jy
! Component: 1450  -  total flux cleaned = -0.000839899 Jy
! Component: 1500  -  total flux cleaned = -0.000956025 Jy
! Component: 1550  -  total flux cleaned = -0.0010423 Jy
! Component: 1600  -  total flux cleaned = -0.00114209 Jy
! Component: 1650  -  total flux cleaned = -0.00121277 Jy
! Component: 1700  -  total flux cleaned = -0.00130387 Jy
! Component: 1750  -  total flux cleaned = -0.0014149 Jy
! Component: 1800  -  total flux cleaned = -0.00149736 Jy
! Component: 1850  -  total flux cleaned = -0.00157918 Jy
! Component: 1900  -  total flux cleaned = -0.00167386 Jy
! Component: 1950  -  total flux cleaned = -0.0017476 Jy
! Component: 2000  -  total flux cleaned = -0.00184747 Jy
! Component: 2050  -  total flux cleaned = -0.00193998 Jy
! Component: 2100  -  total flux cleaned = -0.00203842 Jy
! Component: 2150  -  total flux cleaned = -0.00213607 Jy
! Component: 2200  -  total flux cleaned = -0.00222659 Jy
! Component: 2250  -  total flux cleaned = -0.00233581 Jy
! Component: 2300  -  total flux cleaned = -0.00241888 Jy
! Component: 2350  -  total flux cleaned = -0.00252061 Jy
! Component: 2400  -  total flux cleaned = -0.00260286 Jy
! Component: 2450  -  total flux cleaned = -0.00269727 Jy
! Component: 2500  -  total flux cleaned = -0.00278499 Jy
! Component: 2550  -  total flux cleaned = -0.00287232 Jy
! Component: 2600  -  total flux cleaned = -0.00296536 Jy
! Component: 2650  -  total flux cleaned = -0.00305799 Jy
! Component: 2700  -  total flux cleaned = -0.00313794 Jy
! Component: 2750  -  total flux cleaned = -0.00323588 Jy
! Component: 2800  -  total flux cleaned = -0.00331511 Jy
! Component: 2850  -  total flux cleaned = -0.00339404 Jy
! Component: 2900  -  total flux cleaned = -0.00346665 Jy
! Component: 2950  -  total flux cleaned = -0.00354502 Jy
! Component: 3000  -  total flux cleaned = -0.00360506 Jy
! Component: 3050  -  total flux cleaned = -0.00368292 Jy
! Component: 3100  -  total flux cleaned = -0.00376057 Jy
! Component: 3150  -  total flux cleaned = -0.00383198 Jy
! Component: 3200  -  total flux cleaned = -0.00388544 Jy
! Component: 3250  -  total flux cleaned = -0.00395059 Jy
! Component: 3300  -  total flux cleaned = -0.00401558 Jy
! Component: 3350  -  total flux cleaned = -0.00406866 Jy
! Component: 3400  -  total flux cleaned = -0.00414522 Jy
! Component: 3450  -  total flux cleaned = -0.00419805 Jy
! Component: 3500  -  total flux cleaned = -0.00426849 Jy
! Component: 3550  -  total flux cleaned = -0.00432706 Jy
! Component: 3600  -  total flux cleaned = -0.00438554 Jy
! Component: 3650  -  total flux cleaned = -0.00444388 Jy
! Component: 3700  -  total flux cleaned = -0.0045197 Jy
! Component: 3750  -  total flux cleaned = -0.0045837 Jy
! Component: 3800  -  total flux cleaned = -0.00463602 Jy
! Component: 3850  -  total flux cleaned = -0.00471157 Jy
! Component: 3900  -  total flux cleaned = -0.00476969 Jy
! Component: 3950  -  total flux cleaned = -0.00484523 Jy
! Component: 4000  -  total flux cleaned = -0.00490914 Jy
! Component: 4050  -  total flux cleaned = -0.00496148 Jy
! Total flux subtracted in 4096 components = -0.00501384 Jy
! Clean residual min=-0.000398 max=0.000290 Jy/beam
! Clean residual mean=-0.000002 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.03435 Jy
keep
! Adding 260 model components to the UV plane model.
! The established model now contains 411 components and 0.03435 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0202+8115_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.227 x 12.77 at 11.08 degrees (North through East)
! Clean map  min=-0.00093698  max=0.030772 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0202+8115_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0307719 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000106654 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.03979 1.03979 2.07958 4.15916 8.31831 16.6366 33.2732 66.5465
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.03 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0202+8115_S_uvs.log closed on Sat Oct  5 18:56:02 2013