! Started logfile: /g0/scr/pima/npcsb_uvs/J0136+4751_S_uvs.log on Sat Oct 5 18:55:53 2013 obs /g0/scr/pima/npcsb_uvs/J0136+4751_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0136+4751_S_uva.fits ! AN table 1: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.831349 visibilities/baseline/integration-bin. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1676 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0136+4751_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.876383Jy sigma=23.446708 ! Fit after self-cal, rms=0.696682Jy sigma=9.310518 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.447 mas, bmaj=9.113 mas, bpa=23.73 degrees ! Estimated noise=2.34802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.14357 Jy ! Component: 100 - total flux cleaned = 1.46028 Jy ! Total flux subtracted in 100 components = 1.46028 Jy ! Clean residual min=-0.092013 max=0.172441 Jy/beam ! Clean residual mean=-0.000905 rms=0.034593 Jy/beam ! Combined flux in latest and established models = 1.46028 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 1.46028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466468Jy sigma=5.846890 ! Fit after self-cal, rms=0.466664Jy sigma=5.846560 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.692 mas, bmaj=9.738 mas, bpa=27.99 degrees ! Estimated noise=1.57122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202519 Jy ! Component: 100 - total flux cleaned = 0.292617 Jy ! Component: 150 - total flux cleaned = 0.312824 Jy ! Component: 200 - total flux cleaned = 0.3236 Jy ! Total flux subtracted in 200 components = 0.3236 Jy ! Clean residual min=-0.096209 max=0.149937 Jy/beam ! Clean residual mean=-0.000553 rms=0.026473 Jy/beam ! Combined flux in latest and established models = 1.78388 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 35 components and 1.78388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398335Jy sigma=4.725428 ! Fit after self-cal, rms=0.398283Jy sigma=4.724015 ! Inverting map ! Added new window around map position (12.5, -89). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0569141 Jy ! Component: 100 - total flux cleaned = 0.0679255 Jy ! Component: 150 - total flux cleaned = 0.0760085 Jy ! Component: 200 - total flux cleaned = 0.0829615 Jy ! Total flux subtracted in 200 components = 0.0829615 Jy ! Clean residual min=-0.072936 max=0.093032 Jy/beam ! Clean residual mean=-0.000185 rms=0.018765 Jy/beam ! Combined flux in latest and established models = 1.86684 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 63 components and 1.86684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349268Jy sigma=4.122467 ! Fit after self-cal, rms=0.346253Jy sigma=4.074896 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.95 KP 0.97 ! LA 1.10 MK 0.92 NL 1.14 OV 1.02 ! PT 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.03 HN 0.99 KP 1.00 ! LA 1.06 MK 0.95 NL 1.17 OV 1.03 ! PT 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.66 FD 1.10 HN 0.95 KP 1.01 ! LA 0.87 MK 0.96 NL 1.26 OV 1.02 ! PT 1.12 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.28 FD 1.09 HN 0.92 KP 0.93 ! LA 0.75 MK 1.04 NL 1.15 OV 0.90 ! PT 0.96 ! ! ! Fit before self-cal, rms=0.346253Jy sigma=4.074896 ! Fit after self-cal, rms=0.166521Jy sigma=1.499737 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.636 mas, bmaj=9.701 mas, bpa=28.11 degrees ! Estimated noise=1.57973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00947858 Jy ! Component: 100 - total flux cleaned = 0.0105229 Jy ! Component: 150 - total flux cleaned = 0.0129535 Jy ! Component: 200 - total flux cleaned = 0.0135872 Jy ! Total flux subtracted in 200 components = 0.0135872 Jy ! Clean residual min=-0.024632 max=0.029847 Jy/beam ! Clean residual mean=-0.000074 rms=0.006438 Jy/beam ! Combined flux in latest and established models = 1.88043 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 1.88043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150615Jy sigma=1.367212 ! Fit after self-cal, rms=0.150454Jy sigma=1.362437 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150454Jy sigma=1.362437 ! Fit after self-cal, rms=0.148605Jy sigma=1.334237 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.631 mas, bmaj=9.673 mas, bpa=28.37 degrees ! Estimated noise=1.57996 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00680712 Jy ! Component: 100 - total flux cleaned = 0.00941507 Jy ! Component: 150 - total flux cleaned = 0.00992085 Jy ! Component: 200 - total flux cleaned = 0.00989077 Jy ! Total flux subtracted in 200 components = 0.00989077 Jy ! Clean residual min=-0.020150 max=0.025346 Jy/beam ! Clean residual mean=-0.000059 rms=0.005453 Jy/beam ! Combined flux in latest and established models = 1.89032 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 1.89032 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141003Jy sigma=1.274996 ! Fit after self-cal, rms=0.140743Jy sigma=1.273550 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-73.5, -59.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00977624 Jy ! Component: 100 - total flux cleaned = 0.00611292 Jy ! Component: 150 - total flux cleaned = 0.00347079 Jy ! Component: 200 - total flux cleaned = 0.00150052 Jy ! Total flux subtracted in 200 components = 0.00150052 Jy ! Clean residual min=-0.017377 max=0.016270 Jy/beam ! Clean residual mean=-0.000080 rms=0.004581 Jy/beam ! Combined flux in latest and established models = 1.89182 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 117 components and 1.89182 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134960Jy sigma=1.217898 ! Fit after self-cal, rms=0.134828Jy sigma=1.215991 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134828Jy sigma=1.215991 ! Fit after self-cal, rms=0.133310Jy sigma=1.199169 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.629 mas, bmaj=9.648 mas, bpa=28.5 degrees ! Estimated noise=1.57912 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331359 Jy ! Component: 100 - total flux cleaned = 0.00408698 Jy ! Component: 150 - total flux cleaned = 0.002658 Jy ! Component: 200 - total flux cleaned = 0.00169208 Jy ! Total flux subtracted in 200 components = 0.00169208 Jy ! Clean residual min=-0.015696 max=0.014570 Jy/beam ! Clean residual mean=-0.000066 rms=0.003996 Jy/beam ! Combined flux in latest and established models = 1.89351 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 135 components and 1.89351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129866Jy sigma=1.172768 ! Fit after self-cal, rms=0.129714Jy sigma=1.171902 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00192845 Jy ! Component: 100 - total flux cleaned = -0.00279706 Jy ! Component: 150 - total flux cleaned = -0.00307117 Jy ! Component: 200 - total flux cleaned = -0.00359054 Jy ! Total flux subtracted in 200 components = -0.00359054 Jy ! Clean residual min=-0.014675 max=0.014352 Jy/beam ! Clean residual mean=-0.000063 rms=0.003802 Jy/beam ! Combined flux in latest and established models = 1.88992 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 151 components and 1.88992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127926Jy sigma=1.160340 ! Fit after self-cal, rms=0.127857Jy sigma=1.160026 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127857Jy sigma=1.160026 ! Fit after self-cal, rms=0.127263Jy sigma=1.152173 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.521 mas, bmaj=11.05 mas, bpa=39.42 degrees ! Estimated noise=1.58281 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207649 Jy ! Component: 100 - total flux cleaned = 0.00218412 Jy ! Component: 150 - total flux cleaned = 0.00277783 Jy ! Component: 200 - total flux cleaned = 0.00295674 Jy ! Total flux subtracted in 200 components = 0.00295674 Jy ! Clean residual min=-0.010795 max=0.011602 Jy/beam ! Clean residual mean=-0.000106 rms=0.003346 Jy/beam ! Combined flux in latest and established models = 1.89288 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 169 components and 1.89288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126406Jy sigma=1.140505 ! Fit after self-cal, rms=0.126305Jy sigma=1.139785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72981e-05 Jy ! Component: 100 - total flux cleaned = 0.000152527 Jy ! Component: 150 - total flux cleaned = 0.000305343 Jy ! Component: 200 - total flux cleaned = 0.000161136 Jy ! Total flux subtracted in 200 components = 0.000161136 Jy ! Clean residual min=-0.010370 max=0.011281 Jy/beam ! Clean residual mean=-0.000099 rms=0.003210 Jy/beam ! Combined flux in latest and established models = 1.89304 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 187 components and 1.89304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125861Jy sigma=1.134229 ! Fit after self-cal, rms=0.125839Jy sigma=1.133922 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.629 mas, bmaj=9.631 mas, bpa=28.59 degrees ! Estimated noise=1.57844 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.629 x 9.631 at 28.59 degrees (North through East) ! Clean map min=-0.034343 max=1.5338 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125839Jy sigma=1.133922 ! Fit after self-cal, rms=0.119360Jy sigma=1.025786 ! Inverting map and beam ! Estimated beam: bmin=5.627 mas, bmaj=9.622 mas, bpa=28.62 degrees ! Estimated noise=1.57799 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300757 Jy ! Component: 100 - total flux cleaned = 0.00300218 Jy ! Component: 150 - total flux cleaned = 0.00398524 Jy ! Component: 200 - total flux cleaned = 0.00421018 Jy ! Total flux subtracted in 200 components = 0.00421018 Jy ! Clean residual min=-0.011945 max=0.011754 Jy/beam ! Clean residual mean=-0.000055 rms=0.003134 Jy/beam ! Combined flux in latest and established models = 1.89725 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 204 components and 1.89725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116986Jy sigma=1.014464 ! Fit after self-cal, rms=0.116935Jy sigma=1.014209 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000926382 Jy ! Component: 100 - total flux cleaned = -0.000530082 Jy ! Component: 150 - total flux cleaned = -0.00034492 Jy ! Component: 200 - total flux cleaned = -0.00053192 Jy ! Total flux subtracted in 200 components = -0.00053192 Jy ! Clean residual min=-0.011513 max=0.011467 Jy/beam ! Clean residual mean=-0.000053 rms=0.003059 Jy/beam ! Combined flux in latest and established models = 1.89672 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 215 components and 1.89672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115637Jy sigma=1.009316 ! Fit after self-cal, rms=0.115588Jy sigma=1.009160 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115588Jy sigma=1.009160 ! Fit after self-cal, rms=0.115268Jy sigma=1.004486 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.383 mas, bmaj=9.01 mas, bpa=23.68 degrees ! Estimated noise=2.34662 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.1426 Jy ! Component: 100 - total flux cleaned = 1.47827 Jy ! Component: 150 - total flux cleaned = 1.64617 Jy ! Component: 200 - total flux cleaned = 1.7396 Jy ! Total flux subtracted in 200 components = 1.7396 Jy ! Clean residual min=-0.035435 max=0.062218 Jy/beam ! Clean residual mean=-0.000364 rms=0.011425 Jy/beam ! Combined flux in latest and established models = 1.7396 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 1.7396 Jy ! Inverting map and beam ! Estimated beam: bmin=5.629 mas, bmaj=9.609 mas, bpa=28.71 degrees ! Estimated noise=1.57712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0737799 Jy ! Component: 100 - total flux cleaned = 0.113772 Jy ! Component: 150 - total flux cleaned = 0.125061 Jy ! Component: 200 - total flux cleaned = 0.133988 Jy ! Total flux subtracted in 200 components = 0.133988 Jy ! Clean residual min=-0.021084 max=0.026301 Jy/beam ! Clean residual mean=-0.000247 rms=0.005780 Jy/beam ! Combined flux in latest and established models = 1.87358 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 64 components and 1.87358 Jy ! Inverting map ! Added new window around map position (7.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135039 Jy ! Component: 100 - total flux cleaned = 0.017744 Jy ! Component: 150 - total flux cleaned = 0.0201135 Jy ! Component: 200 - total flux cleaned = 0.0211426 Jy ! Total flux subtracted in 200 components = 0.0211426 Jy ! Clean residual min=-0.015010 max=0.013306 Jy/beam ! Clean residual mean=-0.000124 rms=0.003967 Jy/beam ! Combined flux in latest and established models = 1.89473 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 100 components and 1.89473 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.518 mas, bmaj=11.03 mas, bpa=39.86 degrees ! Estimated noise=1.58258 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00776453 Jy ! Component: 100 - total flux cleaned = 0.00935915 Jy ! Component: 150 - total flux cleaned = 0.0100827 Jy ! Component: 200 - total flux cleaned = 0.0104066 Jy ! Total flux subtracted in 200 components = 0.0104066 Jy ! Clean residual min=-0.011563 max=0.011161 Jy/beam ! Clean residual mean=-0.000134 rms=0.003484 Jy/beam ! Combined flux in latest and established models = 1.90513 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000308792 Jy ! Component: 100 - total flux cleaned = 0.000866644 Jy ! Component: 150 - total flux cleaned = 0.00111745 Jy ! Component: 200 - total flux cleaned = 0.0011147 Jy ! Total flux subtracted in 200 components = 0.0011147 Jy ! Clean residual min=-0.010750 max=0.009708 Jy/beam ! Clean residual mean=-0.000108 rms=0.003005 Jy/beam ! Combined flux in latest and established models = 1.90625 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 159 components and 1.90625 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.629 mas, bmaj=9.609 mas, bpa=28.71 degrees ! Estimated noise=1.57712 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00147254 Jy ! Component: 100 - total flux cleaned = -0.00145764 Jy ! Component: 150 - total flux cleaned = -0.00174821 Jy ! Component: 200 - total flux cleaned = -0.00202018 Jy ! Total flux subtracted in 200 components = -0.00202018 Jy ! Clean residual min=-0.011220 max=0.008968 Jy/beam ! Clean residual mean=-0.000065 rms=0.002694 Jy/beam ! Combined flux in latest and established models = 1.90423 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 189 components and 1.90423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103982Jy sigma=0.991142 ! Fit after self-cal, rms=0.103666Jy sigma=0.987785 wmodel /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.mod ! Writing 189 model components to file: /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J0136+4751_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0136+4751_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.win ! wwins: Wrote 5 windows to /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00465654 Jy ! Component: 100 - total flux cleaned = -0.00821468 Jy ! Component: 150 - total flux cleaned = -0.0112086 Jy ! Component: 200 - total flux cleaned = -0.0137292 Jy ! Component: 250 - total flux cleaned = -0.0154174 Jy ! Component: 300 - total flux cleaned = -0.0168987 Jy ! Component: 350 - total flux cleaned = -0.0177962 Jy ! Component: 400 - total flux cleaned = -0.0184122 Jy ! Component: 450 - total flux cleaned = -0.0194816 Jy ! Component: 500 - total flux cleaned = -0.0200538 Jy ! Component: 550 - total flux cleaned = -0.0208295 Jy ! Component: 600 - total flux cleaned = -0.0211504 Jy ! Component: 650 - total flux cleaned = -0.0213576 Jy ! Component: 700 - total flux cleaned = -0.0216598 Jy ! Component: 750 - total flux cleaned = -0.0218556 Jy ! Component: 800 - total flux cleaned = -0.0224298 Jy ! Component: 850 - total flux cleaned = -0.0232657 Jy ! Component: 900 - total flux cleaned = -0.023447 Jy ! Component: 950 - total flux cleaned = -0.0241558 Jy ! Component: 1000 - total flux cleaned = -0.0244156 Jy ! Component: 1050 - total flux cleaned = -0.0248392 Jy ! Component: 1100 - total flux cleaned = -0.0252513 Jy ! Component: 1150 - total flux cleaned = -0.0253305 Jy ! Component: 1200 - total flux cleaned = -0.0255696 Jy ! Component: 1250 - total flux cleaned = -0.026036 Jy ! Component: 1300 - total flux cleaned = -0.0264172 Jy ! Component: 1350 - total flux cleaned = -0.0270134 Jy ! Component: 1400 - total flux cleaned = -0.0273061 Jy ! Component: 1450 - total flux cleaned = -0.0278819 Jy ! Component: 1500 - total flux cleaned = -0.028235 Jy ! Component: 1550 - total flux cleaned = -0.0285809 Jy ! Component: 1600 - total flux cleaned = -0.0288534 Jy ! Component: 1650 - total flux cleaned = -0.0290553 Jy ! Component: 1700 - total flux cleaned = -0.0292532 Jy ! Component: 1750 - total flux cleaned = -0.0293825 Jy ! Component: 1800 - total flux cleaned = -0.0293821 Jy ! Component: 1850 - total flux cleaned = -0.0294457 Jy ! Component: 1900 - total flux cleaned = -0.0296315 Jy ! Component: 1950 - total flux cleaned = -0.0295704 Jy ! Component: 2000 - total flux cleaned = -0.0296313 Jy ! Component: 2050 - total flux cleaned = -0.0295723 Jy ! Component: 2100 - total flux cleaned = -0.0295737 Jy ! Component: 2150 - total flux cleaned = -0.0297461 Jy ! Component: 2200 - total flux cleaned = -0.0295745 Jy ! Component: 2250 - total flux cleaned = -0.0295177 Jy ! Component: 2300 - total flux cleaned = -0.0296838 Jy ! Component: 2350 - total flux cleaned = -0.0298469 Jy ! Component: 2400 - total flux cleaned = -0.0300625 Jy ! Component: 2450 - total flux cleaned = -0.030116 Jy ! Component: 2500 - total flux cleaned = -0.0303266 Jy ! Component: 2550 - total flux cleaned = -0.030379 Jy ! Component: 2600 - total flux cleaned = -0.0304827 Jy ! Component: 2650 - total flux cleaned = -0.030738 Jy ! Component: 2700 - total flux cleaned = -0.0309399 Jy ! Component: 2750 - total flux cleaned = -0.0310394 Jy ! Component: 2800 - total flux cleaned = -0.0312861 Jy ! Component: 2850 - total flux cleaned = -0.0313357 Jy ! Component: 2900 - total flux cleaned = -0.0316751 Jy ! Component: 2950 - total flux cleaned = -0.0317712 Jy ! Component: 3000 - total flux cleaned = -0.0320556 Jy ! Component: 3050 - total flux cleaned = -0.0321497 Jy ! Component: 3100 - total flux cleaned = -0.0325221 Jy ! Component: 3150 - total flux cleaned = -0.0324757 Jy ! Component: 3200 - total flux cleaned = -0.0326585 Jy ! Component: 3250 - total flux cleaned = -0.0327943 Jy ! Component: 3300 - total flux cleaned = -0.0328841 Jy ! Component: 3350 - total flux cleaned = -0.0329289 Jy ! Component: 3400 - total flux cleaned = -0.0331945 Jy ! Component: 3450 - total flux cleaned = -0.0332825 Jy ! Component: 3500 - total flux cleaned = -0.0335438 Jy ! Component: 3550 - total flux cleaned = -0.0335438 Jy ! Component: 3600 - total flux cleaned = -0.0337591 Jy ! Component: 3650 - total flux cleaned = -0.0340578 Jy ! Component: 3700 - total flux cleaned = -0.0341427 Jy ! Component: 3750 - total flux cleaned = -0.0343953 Jy ! Component: 3800 - total flux cleaned = -0.0344791 Jy ! Component: 3850 - total flux cleaned = -0.0347288 Jy ! Component: 3900 - total flux cleaned = -0.0348944 Jy ! Component: 3950 - total flux cleaned = -0.0351002 Jy ! Component: 4000 - total flux cleaned = -0.0353047 Jy ! Component: 4050 - total flux cleaned = -0.0354671 Jy ! Total flux subtracted in 4096 components = -0.0357902 Jy ! Clean residual min=-0.002417 max=0.002436 Jy/beam ! Clean residual mean=-0.000027 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 1.86844 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 434 components and 1.86844 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0136+4751_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.629 x 9.609 at 28.71 degrees (North through East) ! Clean map min=-0.014787 max=1.5239 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0136+4751_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.52394 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000718583 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.141459 0.141459 0.282918 0.565837 1.13167 2.26335 4.52669 9.05339 18.1068 36.2136 72.4271 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.523 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0136+4751_S_uvs.log closed on Sat Oct 5 18:55:57 2013