! Started logfile: /g0/scr/pima/npcsb_uvs/J0125+8424_S_uvs.log on Sat Oct  5 18:55:47 2013
obs /g0/scr/pima/npcsb_uvs/J0125+8424_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0125+8424_S_uva.fits
! AN table 1: 46 integrations on 6 of 6 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0125+8424
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1104 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0125+8424_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.016369Jy  sigma=0.889896
! Fit after  self-cal, rms=0.944020Jy  sigma=0.785905
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=20.41 mas, bmaj=47.65 mas, bpa=-4.61 degrees
! Estimated noise=69.5401 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.017375 Jy
! Component: 100  -  total flux cleaned = 0.00874518 Jy
! Total flux subtracted in 100 components = 0.00874518 Jy
! Clean residual min=-0.018309 max=0.019320 Jy/beam
! Clean residual mean=0.000383 rms=0.008010 Jy/beam
! Combined flux in latest and established models = 0.00874518 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.00874518 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056817Jy  sigma=0.065082
! Fit after  self-cal, rms=0.054482Jy  sigma=0.064408
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.25 mas, bmaj=44.29 mas, bpa=-1.376 degrees
! Estimated noise=27.6007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00231143 Jy
! Component: 100  -  total flux cleaned = -0.00391204 Jy
! Component: 150  -  total flux cleaned = -0.00387737 Jy
! Component: 200  -  total flux cleaned = -0.00890118 Jy
! Total flux subtracted in 200 components = -0.00890118 Jy
! Clean residual min=-0.008486 max=0.008067 Jy/beam
! Clean residual mean=0.000204 rms=0.003376 Jy/beam
! Combined flux in latest and established models = -0.000155997 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 92 components and -0.000155998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051303Jy  sigma=0.050831
! Fit after  self-cal, rms=0.051209Jy  sigma=0.050649
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.54     KP        0.64     LA        0.67     PT        1.40     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.49     KP        1.45     LA        1.41     PT        0.59     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.38     KP        1.31     LA        1.07     PT        0.79     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.34     KP        1.13     LA        0.90     PT        0.71     
! 
! 
! Fit before self-cal, rms=0.051209Jy  sigma=0.050649
! Fit after  self-cal, rms=0.041778Jy  sigma=0.042257
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.61 mas, bmaj=44.91 mas, bpa=-1.063 degrees
! Estimated noise=23.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000214135 Jy
! Component: 100  -  total flux cleaned = 0.00041005 Jy
! Component: 150  -  total flux cleaned = 0.00039848 Jy
! Component: 200  -  total flux cleaned = 0.00105055 Jy
! Total flux subtracted in 200 components = 0.00105055 Jy
! Clean residual min=-0.003715 max=0.003739 Jy/beam
! Clean residual mean=-0.000050 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 0.000894555 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 145 components and 0.000894555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.037692Jy  sigma=0.043120
! Fit after  self-cal, rms=0.038188Jy  sigma=0.042462
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038188Jy  sigma=0.042462
! Fit after  self-cal, rms=0.037972Jy  sigma=0.040686
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.71 mas, bmaj=45.03 mas, bpa=-1.573 degrees
! Estimated noise=21.5026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00212962 Jy
! Component: 100  -  total flux cleaned = -0.00116525 Jy
! Component: 150  -  total flux cleaned = -0.00115178 Jy
! Component: 200  -  total flux cleaned = -0.001016 Jy
! Total flux subtracted in 200 components = -0.001016 Jy
! Clean residual min=-0.002341 max=0.002416 Jy/beam
! Clean residual mean=-0.000036 rms=0.000855 Jy/beam
! Combined flux in latest and established models = -0.00012144 Jy
selfcal
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 209 components and -0.00012144 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034223Jy  sigma=0.041690
! Fit after  self-cal, rms=0.034335Jy  sigma=0.041540
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0017827 Jy
! Component: 100  -  total flux cleaned = -0.00231975 Jy
! Component: 150  -  total flux cleaned = -0.00232146 Jy
! Component: 200  -  total flux cleaned = -0.00210046 Jy
! Total flux subtracted in 200 components = -0.00210046 Jy
! Clean residual min=-0.000707 max=0.000713 Jy/beam
! Clean residual mean=-0.000002 rms=0.000260 Jy/beam
! Combined flux in latest and established models = -0.0022219 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 280 components and -0.0022219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034012Jy  sigma=0.041698
! Fit after  self-cal, rms=0.033847Jy  sigma=0.041650
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033847Jy  sigma=0.041650
! Fit after  self-cal, rms=0.033471Jy  sigma=0.039704
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.55 mas, bmaj=44.76 mas, bpa=-1.349 degrees
! Estimated noise=18.7915 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.002489 Jy
! Component: 100  -  total flux cleaned = -0.00131469 Jy
! Component: 150  -  total flux cleaned = -0.00183206 Jy
! Component: 200  -  total flux cleaned = -0.00214626 Jy
! Total flux subtracted in 200 components = -0.00214626 Jy
! Clean residual min=-0.001838 max=0.001828 Jy/beam
! Clean residual mean=-0.000039 rms=0.000746 Jy/beam
! Combined flux in latest and established models = -0.00436816 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 304 components and -0.00436816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.030435Jy  sigma=0.041021
! Fit after  self-cal, rms=0.030587Jy  sigma=0.040935
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129134 Jy
! Component: 100  -  total flux cleaned = -0.00189734 Jy
! Component: 150  -  total flux cleaned = -0.0021843 Jy
! Component: 200  -  total flux cleaned = -0.00238744 Jy
! Total flux subtracted in 200 components = -0.00238744 Jy
! Clean residual min=-0.000406 max=0.000400 Jy/beam
! Clean residual mean=-0.000006 rms=0.000166 Jy/beam
! Combined flux in latest and established models = -0.00675561 Jy
! Performing phase self-cal
! Adding 107 model components to the UV plane model.
! The established model now contains 411 components and -0.0067556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.030285Jy  sigma=0.041230
! Fit after  self-cal, rms=0.030093Jy  sigma=0.041178
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.030093Jy  sigma=0.041178
! Fit after  self-cal, rms=0.029816Jy  sigma=0.039386
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.69 mas, bmaj=44.58 mas, bpa=-1.232 degrees
! Estimated noise=16.4578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00173269 Jy
! Component: 100  -  total flux cleaned = -0.000342129 Jy
! Component: 150  -  total flux cleaned = -0.000450438 Jy
! Component: 200  -  total flux cleaned = -0.000447948 Jy
! Total flux subtracted in 200 components = -0.000447948 Jy
! Clean residual min=-0.001752 max=0.001692 Jy/beam
! Clean residual mean=-0.000037 rms=0.000675 Jy/beam
! Combined flux in latest and established models = -0.00720355 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 427 components and -0.00720355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.027100Jy  sigma=0.040753
! Fit after  self-cal, rms=0.027231Jy  sigma=0.040663
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00112153 Jy
! Component: 100  -  total flux cleaned = -0.00156479 Jy
! Component: 150  -  total flux cleaned = -0.00154026 Jy
! Component: 200  -  total flux cleaned = -0.00154361 Jy
! Total flux subtracted in 200 components = -0.00154361 Jy
! Clean residual min=-0.000353 max=0.000356 Jy/beam
! Clean residual mean=-0.000006 rms=0.000135 Jy/beam
! Combined flux in latest and established models = -0.00874716 Jy
! Performing phase self-cal
! Adding 102 model components to the UV plane model.
! The established model now contains 525 components and -0.00874716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.026960Jy  sigma=0.041008
! Fit after  self-cal, rms=0.026820Jy  sigma=0.040957
! Inverting map 
! Added new window around map position (-124.5, -25.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000211422 Jy
! Component: 100  -  total flux cleaned = 0.000481853 Jy
! Component: 150  -  total flux cleaned = 0.000708163 Jy
! Component: 200  -  total flux cleaned = 0.000809097 Jy
! Total flux subtracted in 200 components = 0.000809097 Jy
! Clean residual min=-0.000490 max=0.000382 Jy/beam
! Clean residual mean=-0.000005 rms=0.000128 Jy/beam
! Combined flux in latest and established models = -0.00793806 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 573 components and -0.00793806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.026793Jy  sigma=0.040973
! Fit after  self-cal, rms=0.026770Jy  sigma=0.040957
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=22.41 mas, bmaj=44.62 mas, bpa=-1.133 degrees
! Estimated noise=16.4998 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 22.41 x 44.62 at -1.133 degrees (North through East)
! Clean map  min=-0.017464  max=0.039723 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=19.93 mas, bmaj=47.85 mas, bpa=-8.453 degrees
! Estimated noise=35.4896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0164964 Jy
! Component: 100  -  total flux cleaned = 0.0253174 Jy
! Component: 150  -  total flux cleaned = 0.0314443 Jy
! Component: 200  -  total flux cleaned = 0.0363967 Jy
! Total flux subtracted in 200 components = 0.0363967 Jy
! Clean residual min=-0.021381 max=0.021617 Jy/beam
! Clean residual mean=0.000103 rms=0.007505 Jy/beam
! Combined flux in latest and established models = 0.0363967 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 110 model components to the UV plane model.
! The established model now contains 110 components and 0.0363967 Jy
! Inverting map and beam 
! Estimated beam: bmin=22.41 mas, bmaj=44.62 mas, bpa=-1.133 degrees
! Estimated noise=16.4998 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00705018 Jy
! Component: 100  -  total flux cleaned = 0.012926 Jy
! Component: 150  -  total flux cleaned = 0.0174851 Jy
! Component: 200  -  total flux cleaned = 0.0214099 Jy
! Total flux subtracted in 200 components = 0.0214099 Jy
! Clean residual min=-0.017510 max=0.014791 Jy/beam
! Clean residual mean=0.000096 rms=0.006093 Jy/beam
! Combined flux in latest and established models = 0.0578066 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 174 components and 0.0578066 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=22.69 mas, bmaj=44.58 mas, bpa=-1.232 degrees
! Estimated noise=16.4578 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345233 Jy
! Component: 100  -  total flux cleaned = 0.00785726 Jy
! Component: 150  -  total flux cleaned = 0.0118289 Jy
! Component: 200  -  total flux cleaned = 0.0154315 Jy
! Total flux subtracted in 200 components = 0.0154315 Jy
! Clean residual min=-0.012901 max=0.012282 Jy/beam
! Clean residual mean=0.000076 rms=0.004627 Jy/beam
! Combined flux in latest and established models = 0.073238 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00346607 Jy
! Component: 100  -  total flux cleaned = 0.0064447 Jy
! Component: 150  -  total flux cleaned = 0.00916666 Jy
! Component: 200  -  total flux cleaned = 0.0116648 Jy
! Total flux subtracted in 200 components = 0.0116648 Jy
! Clean residual min=-0.009640 max=0.009880 Jy/beam
! Clean residual mean=0.000050 rms=0.003554 Jy/beam
! Combined flux in latest and established models = 0.0849028 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 231 components and 0.0849029 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=22.41 mas, bmaj=44.62 mas, bpa=-1.133 degrees
! Estimated noise=16.4998 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00225217 Jy
! Component: 100  -  total flux cleaned = 0.00443978 Jy
! Component: 150  -  total flux cleaned = 0.0062316 Jy
! Component: 200  -  total flux cleaned = 0.00799507 Jy
! Total flux subtracted in 200 components = 0.00799507 Jy
! Clean residual min=-0.007296 max=0.009080 Jy/beam
! Clean residual mean=0.000048 rms=0.002890 Jy/beam
! Combined flux in latest and established models = 0.0928979 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 261 components and 0.0928979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.029299Jy  sigma=0.051920
! Fit after  self-cal, rms=0.026991Jy  sigma=0.045680
wmodel /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.mod
! Writing 261 model components to file: /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.mod
wobs /g0/scr/pima/npcsb_uvs/J0125+8424_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0125+8424_S_uvs.fits
wwins /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000983929 Jy
! Component: 100  -  total flux cleaned = 0.00144744 Jy
! Component: 150  -  total flux cleaned = 0.00112538 Jy
! Component: 200  -  total flux cleaned = 0.00116887 Jy
! Component: 250  -  total flux cleaned = 0.00142646 Jy
! Component: 300  -  total flux cleaned = 0.00166421 Jy
! Component: 350  -  total flux cleaned = 0.00188817 Jy
! Component: 400  -  total flux cleaned = 0.00206639 Jy
! Component: 450  -  total flux cleaned = 0.00206655 Jy
! Component: 500  -  total flux cleaned = 0.00186537 Jy
! Component: 550  -  total flux cleaned = 0.00169538 Jy
! Component: 600  -  total flux cleaned = 0.00162547 Jy
! Component: 650  -  total flux cleaned = 0.00151555 Jy
! Component: 700  -  total flux cleaned = 0.001363 Jy
! Component: 750  -  total flux cleaned = 0.00124334 Jy
! Component: 800  -  total flux cleaned = 0.00103515 Jy
! Component: 850  -  total flux cleaned = 0.000816199 Jy
! Component: 900  -  total flux cleaned = 0.000587065 Jy
! Component: 950  -  total flux cleaned = 0.000346236 Jy
! Component: 1000  -  total flux cleaned = 9.40247e-05 Jy
! Component: 1050  -  total flux cleaned = -0.000170617 Jy
! Component: 1100  -  total flux cleaned = -0.000448617 Jy
! Component: 1150  -  total flux cleaned = -0.000680759 Jy
! Component: 1200  -  total flux cleaned = -0.000923023 Jy
! Component: 1250  -  total flux cleaned = -0.00111481 Jy
! Component: 1300  -  total flux cleaned = -0.00131558 Jy
! Component: 1350  -  total flux cleaned = -0.00152768 Jy
! Component: 1400  -  total flux cleaned = -0.00174748 Jy
! Component: 1450  -  total flux cleaned = -0.00198118 Jy
! Component: 1500  -  total flux cleaned = -0.00222604 Jy
! Component: 1550  -  total flux cleaned = -0.00248397 Jy
! Component: 1600  -  total flux cleaned = -0.00275651 Jy
! Component: 1650  -  total flux cleaned = -0.00313581 Jy
! Component: 1700  -  total flux cleaned = -0.00353251 Jy
! Component: 1750  -  total flux cleaned = -0.00374128 Jy
! Component: 1800  -  total flux cleaned = -0.0039619 Jy
! Component: 1850  -  total flux cleaned = -0.00361438 Jy
! Component: 1900  -  total flux cleaned = -0.00361662 Jy
! Component: 1950  -  total flux cleaned = -0.00335969 Jy
! Component: 2000  -  total flux cleaned = -0.00308473 Jy
! Component: 2050  -  total flux cleaned = -0.00293711 Jy
! Component: 2100  -  total flux cleaned = -0.00231665 Jy
! Component: 2150  -  total flux cleaned = -0.00150398 Jy
! Component: 2200  -  total flux cleaned = -0.000468478 Jy
! Component: 2250  -  total flux cleaned = 0.000625572 Jy
! Component: 2300  -  total flux cleaned = 0.0015823 Jy
! Component: 2350  -  total flux cleaned = 0.00279945 Jy
! Component: 2400  -  total flux cleaned = 0.00386699 Jy
! Component: 2450  -  total flux cleaned = 0.00545273 Jy
! Component: 2500  -  total flux cleaned = 0.00642036 Jy
! Component: 2550  -  total flux cleaned = 0.00744043 Jy
! Component: 2600  -  total flux cleaned = 0.00851561 Jy
! Component: 2650  -  total flux cleaned = 0.00965376 Jy
! Component: 2700  -  total flux cleaned = 0.0108635 Jy
! Component: 2750  -  total flux cleaned = 0.0121397 Jy
! Component: 2800  -  total flux cleaned = 0.0134949 Jy
! Component: 2850  -  total flux cleaned = 0.0149329 Jy
! Component: 2900  -  total flux cleaned = 0.0156775 Jy
! Component: 2950  -  total flux cleaned = 0.0176799 Jy
! Component: 3000  -  total flux cleaned = 0.0194004 Jy
! Component: 3050  -  total flux cleaned = 0.0202933 Jy
! Component: 3100  -  total flux cleaned = 0.0217026 Jy
! Component: 3150  -  total flux cleaned = 0.0237018 Jy
! Component: 3200  -  total flux cleaned = 0.0258444 Jy
! Component: 3250  -  total flux cleaned = 0.0281356 Jy
! Component: 3300  -  total flux cleaned = 0.0293612 Jy
! Component: 3350  -  total flux cleaned = 0.0319242 Jy
! Component: 3400  -  total flux cleaned = 0.0332772 Jy
! Component: 3450  -  total flux cleaned = 0.0361192 Jy
! Component: 3500  -  total flux cleaned = 0.0383965 Jy
! Component: 3550  -  total flux cleaned = 0.0407815 Jy
! Component: 3600  -  total flux cleaned = 0.0433004 Jy
! Component: 3650  -  total flux cleaned = 0.0468825 Jy
! Component: 3700  -  total flux cleaned = 0.0487802 Jy
! Component: 3750  -  total flux cleaned = 0.0527634 Jy
! Component: 3800  -  total flux cleaned = 0.0549085 Jy
! Component: 3850  -  total flux cleaned = 0.0593466 Jy
! Component: 3900  -  total flux cleaned = 0.0629304 Jy
! Component: 3950  -  total flux cleaned = 0.0666452 Jy
! Component: 4000  -  total flux cleaned = 0.0705914 Jy
! Component: 4050  -  total flux cleaned = 0.0748177 Jy
! Total flux subtracted in 4096 components = 0.0792909 Jy
! Clean residual min=-0.079933 max=0.081558 Jy/beam
! Clean residual mean=0.000962 rms=0.032946 Jy/beam
! Combined flux in latest and established models = 0.172189 Jy
keep
! Adding 155 model components to the UV plane model.
! The established model now contains 416 components and 0.172189 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsb_uvs/J0125+8424_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 22.41 x 44.62 at -1.133 degrees (North through East)
! Clean map  min=-0.17445  max=0.14873 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0125+8424_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.14873 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0350044 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -70.6068 70.6068
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.105 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.148 
quit
! Quitting program
! Log file /g0/scr/pima/npcsb_uvs/J0125+8424_S_uvs.log closed on Sat Oct  5 18:55:53 2013