! Started logfile: /g0/scr/pima/npcsb_uvs/J0117+8928_S_uvs.log on Sat Oct 5 18:55:42 2013 obs /g0/scr/pima/npcsb_uvs/J0117+8928_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0117+8928_S_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.6657 visibilities/baseline/integration-bin. ! Found source: J0117+8928 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5512 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0117+8928_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.025225Jy sigma=1.563603 ! Fit after self-cal, rms=0.896124Jy sigma=1.281571 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.31 mas, bmaj=10.05 mas, bpa=-1.719 degrees ! Estimated noise=16.7104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122465 Jy ! Component: 100 - total flux cleaned = 0.169039 Jy ! Total flux subtracted in 100 components = 0.169039 Jy ! Clean residual min=-0.034794 max=0.033118 Jy/beam ! Clean residual mean=0.000063 rms=0.010361 Jy/beam ! Combined flux in latest and established models = 0.169039 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 39 components and 0.169039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160171Jy sigma=0.302960 ! Fit after self-cal, rms=0.159033Jy sigma=0.302222 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.841 mas, bmaj=12.11 mas, bpa=-1.83 degrees ! Estimated noise=7.47526 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152824 Jy ! Component: 100 - total flux cleaned = 0.0196894 Jy ! Component: 150 - total flux cleaned = 0.0209616 Jy ! Component: 200 - total flux cleaned = 0.0214905 Jy ! Total flux subtracted in 200 components = 0.0214905 Jy ! Clean residual min=-0.047273 max=0.050082 Jy/beam ! Clean residual mean=-0.000049 rms=0.014166 Jy/beam ! Combined flux in latest and established models = 0.190529 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.190529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158860Jy sigma=0.300964 ! Fit after self-cal, rms=0.158817Jy sigma=0.300846 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.04 HN 0.79 KP 0.71 ! LA 0.65 MK 0.96 NL 1.42 OV 1.12 ! PT 0.48 SC 0.57 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.03 HN 0.74 KP 1.05 ! LA 0.74 MK 0.83 NL 1.22 OV 0.70 ! PT 11870631936.00 SC 0.68 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 0.76 KP 1.07 ! LA 0.65 MK 1.10 NL 1.20 OV 0.77 ! PT 11645396992.00 SC 0.77 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.71 FD 0.94 HN 0.66 KP 0.99 ! LA 0.56 MK 0.98 NL 1.14 OV 0.62 ! PT 10243993600.00 SC 0.81 ! ! ! Fit before self-cal, rms=0.158817Jy sigma=0.300846 ! Fit after self-cal, rms=0.113773Jy sigma=0.159428 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.544 mas, bmaj=11.67 mas, bpa=-1.89 degrees ! Estimated noise=6.64958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00799501 Jy ! Component: 100 - total flux cleaned = -0.00660428 Jy ! Component: 150 - total flux cleaned = -0.00580217 Jy ! Component: 200 - total flux cleaned = -0.00535949 Jy ! Total flux subtracted in 200 components = -0.00535949 Jy ! Clean residual min=-0.022762 max=0.036574 Jy/beam ! Clean residual mean=-0.000035 rms=0.007783 Jy/beam ! Combined flux in latest and established models = 0.18517 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.18517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108566Jy sigma=0.158309 ! Fit after self-cal, rms=0.109334Jy sigma=0.157016 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109334Jy sigma=0.157016 ! Fit after self-cal, rms=0.100813Jy sigma=0.153999 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.447 mas, bmaj=11.49 mas, bpa=-0.7129 degrees ! Estimated noise=6.0179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00889891 Jy ! Component: 100 - total flux cleaned = -0.00720132 Jy ! Component: 150 - total flux cleaned = -0.00676654 Jy ! Component: 200 - total flux cleaned = -0.00624745 Jy ! Total flux subtracted in 200 components = -0.00624745 Jy ! Clean residual min=-0.019594 max=0.031133 Jy/beam ! Clean residual mean=-0.000032 rms=0.006605 Jy/beam ! Combined flux in latest and established models = 0.178922 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 68 components and 0.178922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096093Jy sigma=0.153325 ! Fit after self-cal, rms=0.096178Jy sigma=0.153222 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0186349 Jy ! Component: 100 - total flux cleaned = 0.0212571 Jy ! Component: 150 - total flux cleaned = 0.0208853 Jy ! Component: 200 - total flux cleaned = 0.0205361 Jy ! Total flux subtracted in 200 components = 0.0205361 Jy ! Clean residual min=-0.012711 max=0.015960 Jy/beam ! Clean residual mean=-0.000064 rms=0.004027 Jy/beam ! Combined flux in latest and established models = 0.199458 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 95 components and 0.199458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086472Jy sigma=0.135597 ! Fit after self-cal, rms=0.084143Jy sigma=0.130885 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084143Jy sigma=0.130885 ! Fit after self-cal, rms=0.074315Jy sigma=0.122275 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.375 mas, bmaj=11.26 mas, bpa=-0.7388 degrees ! Estimated noise=5.36665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000738426 Jy ! Component: 100 - total flux cleaned = 0.00149003 Jy ! Component: 150 - total flux cleaned = 0.00310367 Jy ! Component: 200 - total flux cleaned = 0.00291993 Jy ! Total flux subtracted in 200 components = 0.00291993 Jy ! Clean residual min=-0.008668 max=0.009587 Jy/beam ! Clean residual mean=-0.000014 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 0.202378 Jy selfcal ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 147 components and 0.202378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068338Jy sigma=0.119352 ! Fit after self-cal, rms=0.067683Jy sigma=0.117294 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481095 Jy ! Component: 100 - total flux cleaned = 0.00581253 Jy ! Component: 150 - total flux cleaned = 0.00596126 Jy ! Component: 200 - total flux cleaned = 0.00585702 Jy ! Total flux subtracted in 200 components = 0.00585702 Jy ! Clean residual min=-0.007503 max=0.008194 Jy/beam ! Clean residual mean=-0.000014 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 0.208235 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 182 components and 0.208235 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066650Jy sigma=0.116413 ! Fit after self-cal, rms=0.066427Jy sigma=0.115836 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066427Jy sigma=0.115836 ! Fit after self-cal, rms=0.063757Jy sigma=0.112506 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.198 mas, bmaj=14.35 mas, bpa=2.515 degrees ! Estimated noise=5.03788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00505391 Jy ! Component: 100 - total flux cleaned = -0.00440026 Jy ! Component: 150 - total flux cleaned = -0.0038296 Jy ! Component: 200 - total flux cleaned = -0.00327488 Jy ! Total flux subtracted in 200 components = -0.00327488 Jy ! Clean residual min=-0.008309 max=0.008237 Jy/beam ! Clean residual mean=0.000002 rms=0.002435 Jy/beam ! Combined flux in latest and established models = 0.20496 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 211 components and 0.20496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060750Jy sigma=0.114181 ! Fit after self-cal, rms=0.060682Jy sigma=0.113488 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256194 Jy ! Component: 100 - total flux cleaned = 0.0033189 Jy ! Component: 150 - total flux cleaned = 0.00345733 Jy ! Component: 200 - total flux cleaned = 0.00352133 Jy ! Total flux subtracted in 200 components = 0.00352133 Jy ! Clean residual min=-0.007787 max=0.006825 Jy/beam ! Clean residual mean=0.000002 rms=0.002301 Jy/beam ! Combined flux in latest and established models = 0.208482 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 229 components and 0.208482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060270Jy sigma=0.113470 ! Fit after self-cal, rms=0.060205Jy sigma=0.113253 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.252 mas, bmaj=11.14 mas, bpa=-0.9279 degrees ! Estimated noise=4.95346 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.252 x 11.14 at -0.9279 degrees (North through East) ! Clean map min=-0.012121 max=0.085093 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.046 mas, bmaj=9.789 mas, bpa=0.3441 degrees ! Estimated noise=9.52783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0701909 Jy ! Component: 100 - total flux cleaned = 0.104644 Jy ! Component: 150 - total flux cleaned = 0.128923 Jy ! Component: 200 - total flux cleaned = 0.147092 Jy ! Total flux subtracted in 200 components = 0.147092 Jy ! Clean residual min=-0.014156 max=0.013855 Jy/beam ! Clean residual mean=0.000045 rms=0.004007 Jy/beam ! Combined flux in latest and established models = 0.147092 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 70 model components to the UV plane model. ! The established model now contains 70 components and 0.147092 Jy ! Inverting map and beam ! Estimated beam: bmin=5.252 mas, bmaj=11.14 mas, bpa=-0.9279 degrees ! Estimated noise=4.95346 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213792 Jy ! Component: 100 - total flux cleaned = 0.0355442 Jy ! Component: 150 - total flux cleaned = 0.0422689 Jy ! Component: 200 - total flux cleaned = 0.047933 Jy ! Total flux subtracted in 200 components = 0.047933 Jy ! Clean residual min=-0.012050 max=0.008106 Jy/beam ! Clean residual mean=0.000024 rms=0.002915 Jy/beam ! Combined flux in latest and established models = 0.195025 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 123 components and 0.195025 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.198 mas, bmaj=14.35 mas, bpa=2.515 degrees ! Estimated noise=5.03788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00682976 Jy ! Component: 100 - total flux cleaned = 0.0104726 Jy ! Component: 150 - total flux cleaned = 0.0121439 Jy ! Component: 200 - total flux cleaned = 0.0131925 Jy ! Total flux subtracted in 200 components = 0.0131925 Jy ! Clean residual min=-0.010306 max=0.007246 Jy/beam ! Clean residual mean=0.000013 rms=0.002623 Jy/beam ! Combined flux in latest and established models = 0.208217 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000737075 Jy ! Component: 100 - total flux cleaned = 0.00100368 Jy ! Component: 150 - total flux cleaned = 0.00123236 Jy ! Component: 200 - total flux cleaned = 0.0012334 Jy ! Total flux subtracted in 200 components = 0.0012334 Jy ! Clean residual min=-0.009275 max=0.006842 Jy/beam ! Clean residual mean=0.000010 rms=0.002407 Jy/beam ! Combined flux in latest and established models = 0.209451 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 171 components and 0.209451 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.252 mas, bmaj=11.14 mas, bpa=-0.9279 degrees ! Estimated noise=4.95346 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145742 Jy ! Component: 100 - total flux cleaned = 0.00167603 Jy ! Component: 150 - total flux cleaned = 0.00187264 Jy ! Component: 200 - total flux cleaned = 0.00187254 Jy ! Total flux subtracted in 200 components = 0.00187254 Jy ! Clean residual min=-0.008460 max=0.006252 Jy/beam ! Clean residual mean=0.000004 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 0.211323 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 194 components and 0.211323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061233Jy sigma=0.114340 ! Fit after self-cal, rms=0.060829Jy sigma=0.113703 wmodel /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.mod ! Writing 194 model components to file: /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J0117+8928_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0117+8928_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00239168 Jy ! Component: 100 - total flux cleaned = -0.00362193 Jy ! Component: 150 - total flux cleaned = -0.00451127 Jy ! Component: 200 - total flux cleaned = -0.00515432 Jy ! Component: 250 - total flux cleaned = -0.00558213 Jy ! Component: 300 - total flux cleaned = -0.00606902 Jy ! Component: 350 - total flux cleaned = -0.0064554 Jy ! Component: 400 - total flux cleaned = -0.00696849 Jy ! Component: 450 - total flux cleaned = -0.00696698 Jy ! Component: 500 - total flux cleaned = -0.00710135 Jy ! Component: 550 - total flux cleaned = -0.00742349 Jy ! Component: 600 - total flux cleaned = -0.00767177 Jy ! Component: 650 - total flux cleaned = -0.00803123 Jy ! Component: 700 - total flux cleaned = -0.00832009 Jy ! Component: 750 - total flux cleaned = -0.00865736 Jy ! Component: 800 - total flux cleaned = -0.0089306 Jy ! Component: 850 - total flux cleaned = -0.00898462 Jy ! Component: 900 - total flux cleaned = -0.00919335 Jy ! Component: 950 - total flux cleaned = -0.00944366 Jy ! Component: 1000 - total flux cleaned = -0.00959114 Jy ! Component: 1050 - total flux cleaned = -0.00983082 Jy ! Component: 1100 - total flux cleaned = -0.0101585 Jy ! Component: 1150 - total flux cleaned = -0.0104318 Jy ! Component: 1200 - total flux cleaned = -0.0107011 Jy ! Component: 1250 - total flux cleaned = -0.011095 Jy ! Component: 1300 - total flux cleaned = -0.0112239 Jy ! Component: 1350 - total flux cleaned = -0.0114763 Jy ! Component: 1400 - total flux cleaned = -0.0115587 Jy ! Component: 1450 - total flux cleaned = -0.0117214 Jy ! Component: 1500 - total flux cleaned = -0.011921 Jy ! Component: 1550 - total flux cleaned = -0.0121555 Jy ! Component: 1600 - total flux cleaned = -0.0124245 Jy ! Component: 1650 - total flux cleaned = -0.0125754 Jy ! Component: 1700 - total flux cleaned = -0.0127614 Jy ! Component: 1750 - total flux cleaned = -0.0129443 Jy ! Component: 1800 - total flux cleaned = -0.0130528 Jy ! Component: 1850 - total flux cleaned = -0.0131601 Jy ! Component: 1900 - total flux cleaned = -0.0134055 Jy ! Component: 1950 - total flux cleaned = -0.0134058 Jy ! Component: 2000 - total flux cleaned = -0.0136786 Jy ! Component: 2050 - total flux cleaned = -0.0138134 Jy ! Component: 2100 - total flux cleaned = -0.013913 Jy ! Component: 2150 - total flux cleaned = -0.0140446 Jy ! Component: 2200 - total flux cleaned = -0.0142064 Jy ! Component: 2250 - total flux cleaned = -0.0143657 Jy ! Component: 2300 - total flux cleaned = -0.0143971 Jy ! Component: 2350 - total flux cleaned = -0.0144906 Jy ! Component: 2400 - total flux cleaned = -0.0145218 Jy ! Component: 2450 - total flux cleaned = -0.0146738 Jy ! Component: 2500 - total flux cleaned = -0.0147937 Jy ! Component: 2550 - total flux cleaned = -0.014853 Jy ! Component: 2600 - total flux cleaned = -0.0150003 Jy ! Component: 2650 - total flux cleaned = -0.0150874 Jy ! Component: 2700 - total flux cleaned = -0.0151449 Jy ! Component: 2750 - total flux cleaned = -0.0152587 Jy ! Component: 2800 - total flux cleaned = -0.0153433 Jy ! Component: 2850 - total flux cleaned = -0.0154543 Jy ! Component: 2900 - total flux cleaned = -0.0155919 Jy ! Component: 2950 - total flux cleaned = -0.0155918 Jy ! Component: 3000 - total flux cleaned = -0.015646 Jy ! Component: 3050 - total flux cleaned = -0.0156728 Jy ! Component: 3100 - total flux cleaned = -0.0158054 Jy ! Component: 3150 - total flux cleaned = -0.0158316 Jy ! Component: 3200 - total flux cleaned = -0.0157796 Jy ! Component: 3250 - total flux cleaned = -0.0158315 Jy ! Component: 3300 - total flux cleaned = -0.0158058 Jy ! Component: 3350 - total flux cleaned = -0.0158058 Jy ! Component: 3400 - total flux cleaned = -0.0157803 Jy ! Component: 3450 - total flux cleaned = -0.0156291 Jy ! Component: 3500 - total flux cleaned = -0.0156041 Jy ! Component: 3550 - total flux cleaned = -0.0155793 Jy ! Component: 3600 - total flux cleaned = -0.0155545 Jy ! Component: 3650 - total flux cleaned = -0.0155052 Jy ! Component: 3700 - total flux cleaned = -0.0154318 Jy ! Component: 3750 - total flux cleaned = -0.0153831 Jy ! Component: 3800 - total flux cleaned = -0.0152618 Jy ! Component: 3850 - total flux cleaned = -0.0152135 Jy ! Component: 3900 - total flux cleaned = -0.0150932 Jy ! Component: 3950 - total flux cleaned = -0.015021 Jy ! Component: 4000 - total flux cleaned = -0.0149971 Jy ! Component: 4050 - total flux cleaned = -0.0149971 Jy ! Total flux subtracted in 4096 components = -0.0149017 Jy ! Clean residual min=-0.001191 max=0.001321 Jy/beam ! Clean residual mean=0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.196422 Jy keep ! Adding 417 model components to the UV plane model. ! The established model now contains 611 components and 0.196422 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0117+8928_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.252 x 11.14 at -0.9279 degrees (North through East) ! Clean map min=-0.0090413 max=0.09016 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0117+8928_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0901604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000457777 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.52321 1.52321 3.04642 6.09284 12.1857 24.3714 48.7427 97.4854 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.09 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0117+8928_S_uvs.log closed on Sat Oct 5 18:55:46 2013