! Started logfile: /g0/scr/pima/npcsb_uvs/J0038+8447_S_uvs.log on Sat Oct 5 18:55:37 2013 obs /g0/scr/pima/npcsb_uvs/J0038+8447_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsb_uvs/J0038+8447_S_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.466667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0038+8447 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3948 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsb_uvs/J0038+8447_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.015030Jy sigma=1.058078 ! Fit after self-cal, rms=0.907356Jy sigma=0.887639 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.961 mas, bmaj=14.76 mas, bpa=14.7 degrees ! Estimated noise=32.3976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0871894 Jy ! Component: 100 - total flux cleaned = 0.117627 Jy ! Total flux subtracted in 100 components = 0.117627 Jy ! Clean residual min=-0.018659 max=0.021247 Jy/beam ! Clean residual mean=0.000077 rms=0.006787 Jy/beam ! Combined flux in latest and established models = 0.117627 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.117627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099928Jy sigma=0.131173 ! Fit after self-cal, rms=0.098994Jy sigma=0.130460 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.053 mas, bmaj=16.69 mas, bpa=16.98 degrees ! Estimated noise=12.9407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331148 Jy ! Component: 100 - total flux cleaned = 0.0504928 Jy ! Component: 150 - total flux cleaned = 0.0609173 Jy ! Component: 200 - total flux cleaned = 0.067212 Jy ! Total flux subtracted in 200 components = 0.067212 Jy ! Clean residual min=-0.022110 max=0.021443 Jy/beam ! Clean residual mean=0.000020 rms=0.008124 Jy/beam ! Combined flux in latest and established models = 0.184839 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 84 components and 0.184839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099129Jy sigma=0.108768 ! Fit after self-cal, rms=0.098913Jy sigma=0.108556 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.96 HN 1.00* KP 1.25 ! LA 0.84 MK 0.73 NL 1.00* OV 1.11 ! PT 0.93 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.02 HN 1.00* KP 1.14 ! LA 0.83 MK 0.75 NL 1.00* OV 0.92 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.08 HN 1.00* KP 1.22 ! LA 0.69 MK 0.85 NL 1.00* OV 1.11 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.11 HN 1.00* KP 1.06 ! LA 0.61 MK 0.83 NL 1.00* OV 0.98 ! PT 0.83 SC 1.00* ! ! ! Fit before self-cal, rms=0.098913Jy sigma=0.108556 ! Fit after self-cal, rms=0.089953Jy sigma=0.093023 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.748 mas, bmaj=16.46 mas, bpa=15.95 degrees ! Estimated noise=10.8883 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0140351 Jy ! Component: 100 - total flux cleaned = -0.0184185 Jy ! Component: 150 - total flux cleaned = -0.0204896 Jy ! Component: 200 - total flux cleaned = -0.0209771 Jy ! Total flux subtracted in 200 components = -0.0209771 Jy ! Clean residual min=-0.009252 max=0.012910 Jy/beam ! Clean residual mean=-0.000007 rms=0.003507 Jy/beam ! Combined flux in latest and established models = 0.163862 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 98 components and 0.163862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083680Jy sigma=0.095798 ! Fit after self-cal, rms=0.083588Jy sigma=0.094644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083588Jy sigma=0.094644 ! Fit after self-cal, rms=0.078242Jy sigma=0.091506 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.488 mas, bmaj=16.29 mas, bpa=15.12 degrees ! Estimated noise=9.41765 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0113968 Jy ! Component: 100 - total flux cleaned = -0.0148299 Jy ! Component: 150 - total flux cleaned = -0.0165073 Jy ! Component: 200 - total flux cleaned = -0.0169432 Jy ! Total flux subtracted in 200 components = -0.0169432 Jy ! Clean residual min=-0.007827 max=0.009740 Jy/beam ! Clean residual mean=-0.000010 rms=0.002841 Jy/beam ! Combined flux in latest and established models = 0.146919 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 109 components and 0.146919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073270Jy sigma=0.094246 ! Fit after self-cal, rms=0.073281Jy sigma=0.094209 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000661122 Jy ! Component: 100 - total flux cleaned = -0.000667376 Jy ! Component: 150 - total flux cleaned = -0.000668685 Jy ! Component: 200 - total flux cleaned = -0.000667805 Jy ! Total flux subtracted in 200 components = -0.000667805 Jy ! Clean residual min=-0.007884 max=0.009668 Jy/beam ! Clean residual mean=-0.000007 rms=0.002848 Jy/beam ! Combined flux in latest and established models = 0.146251 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 120 components and 0.146251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073140Jy sigma=0.094361 ! Fit after self-cal, rms=0.073126Jy sigma=0.094345 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073126Jy sigma=0.094345 ! Fit after self-cal, rms=0.068376Jy sigma=0.091299 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.201 mas, bmaj=16.07 mas, bpa=14.27 degrees ! Estimated noise=8.0784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00959699 Jy ! Component: 100 - total flux cleaned = -0.0125992 Jy ! Component: 150 - total flux cleaned = -0.0141051 Jy ! Component: 200 - total flux cleaned = -0.0145243 Jy ! Total flux subtracted in 200 components = -0.0145243 Jy ! Clean residual min=-0.006570 max=0.007871 Jy/beam ! Clean residual mean=-0.000010 rms=0.002381 Jy/beam ! Combined flux in latest and established models = 0.131727 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 144 components and 0.131727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064216Jy sigma=0.093980 ! Fit after self-cal, rms=0.064213Jy sigma=0.093955 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000387667 Jy ! Component: 100 - total flux cleaned = -0.000419955 Jy ! Component: 150 - total flux cleaned = -0.00044832 Jy ! Component: 200 - total flux cleaned = -0.00047526 Jy ! Total flux subtracted in 200 components = -0.00047526 Jy ! Clean residual min=-0.006663 max=0.007919 Jy/beam ! Clean residual mean=-0.000008 rms=0.002384 Jy/beam ! Combined flux in latest and established models = 0.131252 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 154 components and 0.131252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064113Jy sigma=0.094078 ! Fit after self-cal, rms=0.064099Jy sigma=0.094071 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064099Jy sigma=0.094071 ! Fit after self-cal, rms=0.060095Jy sigma=0.091189 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.912 mas, bmaj=19.79 mas, bpa=32.04 degrees ! Estimated noise=7.71756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00896858 Jy ! Component: 100 - total flux cleaned = -0.0116594 Jy ! Component: 150 - total flux cleaned = -0.0122002 Jy ! Component: 200 - total flux cleaned = -0.0122009 Jy ! Total flux subtracted in 200 components = -0.0122009 Jy ! Clean residual min=-0.007172 max=0.008579 Jy/beam ! Clean residual mean=-0.000012 rms=0.002662 Jy/beam ! Combined flux in latest and established models = 0.119051 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 174 components and 0.119051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056588Jy sigma=0.093828 ! Fit after self-cal, rms=0.056577Jy sigma=0.093703 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.77007e-05 Jy ! Component: 100 - total flux cleaned = -4.77554e-05 Jy ! Component: 150 - total flux cleaned = -4.58776e-05 Jy ! Component: 200 - total flux cleaned = -4.58945e-05 Jy ! Total flux subtracted in 200 components = -4.58945e-05 Jy ! Clean residual min=-0.007153 max=0.008610 Jy/beam ! Clean residual mean=-0.000009 rms=0.002645 Jy/beam ! Combined flux in latest and established models = 0.119005 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 196 components and 0.119005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056521Jy sigma=0.093777 ! Fit after self-cal, rms=0.056522Jy sigma=0.093757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.954 mas, bmaj=15.91 mas, bpa=13.55 degrees ! Estimated noise=6.94022 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.954 x 15.91 at 13.55 degrees (North through East) ! Clean map min=-0.0057775 max=0.06047 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.384 mas, bmaj=14.96 mas, bpa=12.87 degrees ! Estimated noise=15.0421 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422286 Jy ! Component: 100 - total flux cleaned = 0.0620933 Jy ! Component: 150 - total flux cleaned = 0.0756438 Jy ! Component: 200 - total flux cleaned = 0.0854534 Jy ! Total flux subtracted in 200 components = 0.0854534 Jy ! Clean residual min=-0.008058 max=0.008882 Jy/beam ! Clean residual mean=0.000029 rms=0.002785 Jy/beam ! Combined flux in latest and established models = 0.0854534 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 73 model components to the UV plane model. ! The established model now contains 73 components and 0.0854534 Jy ! Inverting map and beam ! Estimated beam: bmin=4.954 mas, bmaj=15.91 mas, bpa=13.55 degrees ! Estimated noise=6.94022 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136686 Jy ! Component: 100 - total flux cleaned = 0.0206557 Jy ! Component: 150 - total flux cleaned = 0.0245321 Jy ! Component: 200 - total flux cleaned = 0.0268958 Jy ! Total flux subtracted in 200 components = 0.0268958 Jy ! Clean residual min=-0.006509 max=0.007908 Jy/beam ! Clean residual mean=0.000006 rms=0.002331 Jy/beam ! Combined flux in latest and established models = 0.112349 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 126 components and 0.112349 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.912 mas, bmaj=19.79 mas, bpa=32.04 degrees ! Estimated noise=7.71756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266329 Jy ! Component: 100 - total flux cleaned = 0.00323874 Jy ! Component: 150 - total flux cleaned = 0.00342237 Jy ! Component: 200 - total flux cleaned = 0.00362793 Jy ! Total flux subtracted in 200 components = 0.00362793 Jy ! Clean residual min=-0.007542 max=0.009282 Jy/beam ! Clean residual mean=-0.000002 rms=0.002868 Jy/beam ! Combined flux in latest and established models = 0.115977 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001472 Jy ! Component: 100 - total flux cleaned = 0.000213963 Jy ! Component: 150 - total flux cleaned = 0.000276809 Jy ! Component: 200 - total flux cleaned = 0.000335774 Jy ! Total flux subtracted in 200 components = 0.000335774 Jy ! Clean residual min=-0.007540 max=0.009176 Jy/beam ! Clean residual mean=-0.000003 rms=0.002837 Jy/beam ! Combined flux in latest and established models = 0.116313 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 144 components and 0.116313 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.954 mas, bmaj=15.91 mas, bpa=13.55 degrees ! Estimated noise=6.94022 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000719302 Jy ! Component: 100 - total flux cleaned = -0.000950248 Jy ! Component: 150 - total flux cleaned = -0.00107001 Jy ! Component: 200 - total flux cleaned = -0.0011067 Jy ! Total flux subtracted in 200 components = -0.0011067 Jy ! Clean residual min=-0.006389 max=0.007886 Jy/beam ! Clean residual mean=-0.000001 rms=0.002181 Jy/beam ! Combined flux in latest and established models = 0.115206 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 167 components and 0.115206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056698Jy sigma=0.094831 ! Fit after self-cal, rms=0.056705Jy sigma=0.094660 wmodel /g0/scr/pima/npcsb_uvs/J0038+8447_S_map.mod ! Writing 167 model components to file: /g0/scr/pima/npcsb_uvs/J0038+8447_S_map.mod wobs /g0/scr/pima/npcsb_uvs/J0038+8447_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsb_uvs/J0038+8447_S_uvs.fits wwins /g0/scr/pima/npcsb_uvs/J0038+8447_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsb_uvs/J0038+8447_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254135 Jy ! Component: 100 - total flux cleaned = 0.00323354 Jy ! Component: 150 - total flux cleaned = 0.00401331 Jy ! Component: 200 - total flux cleaned = 0.00495094 Jy ! Component: 250 - total flux cleaned = 0.00607419 Jy ! Component: 300 - total flux cleaned = 0.00690836 Jy ! Component: 350 - total flux cleaned = 0.00767378 Jy ! Component: 400 - total flux cleaned = 0.0083781 Jy ! Component: 450 - total flux cleaned = 0.009125 Jy ! Component: 500 - total flux cleaned = 0.0098622 Jy ! Component: 550 - total flux cleaned = 0.0103378 Jy ! Component: 600 - total flux cleaned = 0.0108286 Jy ! Component: 650 - total flux cleaned = 0.011253 Jy ! Component: 700 - total flux cleaned = 0.0115092 Jy ! Component: 750 - total flux cleaned = 0.0117191 Jy ! Component: 800 - total flux cleaned = 0.011953 Jy ! Component: 850 - total flux cleaned = 0.0121451 Jy ! Component: 900 - total flux cleaned = 0.0123886 Jy ! Component: 950 - total flux cleaned = 0.0125338 Jy ! Component: 1000 - total flux cleaned = 0.0126735 Jy ! Component: 1050 - total flux cleaned = 0.0127272 Jy ! Component: 1100 - total flux cleaned = 0.0126757 Jy ! Component: 1150 - total flux cleaned = 0.0125755 Jy ! Component: 1200 - total flux cleaned = 0.0124289 Jy ! Component: 1250 - total flux cleaned = 0.0123099 Jy ! Component: 1300 - total flux cleaned = 0.0121702 Jy ! Component: 1350 - total flux cleaned = 0.0120335 Jy ! Component: 1400 - total flux cleaned = 0.0118994 Jy ! Component: 1450 - total flux cleaned = 0.0117237 Jy ! Component: 1500 - total flux cleaned = 0.0115723 Jy ! Component: 1550 - total flux cleaned = 0.0114231 Jy ! Component: 1600 - total flux cleaned = 0.0112551 Jy ! Component: 1650 - total flux cleaned = 0.01111 Jy ! Component: 1700 - total flux cleaned = 0.0109255 Jy ! Component: 1750 - total flux cleaned = 0.0106196 Jy ! Component: 1800 - total flux cleaned = 0.0103551 Jy ! Component: 1850 - total flux cleaned = 0.0100705 Jy ! Component: 1900 - total flux cleaned = 0.00978614 Jy ! Component: 1950 - total flux cleaned = 0.00950178 Jy ! Component: 2000 - total flux cleaned = 0.0092377 Jy ! Component: 2050 - total flux cleaned = 0.0089331 Jy ! Component: 2100 - total flux cleaned = 0.00868942 Jy ! Component: 2150 - total flux cleaned = 0.008486 Jy ! Component: 2200 - total flux cleaned = 0.00824135 Jy ! Component: 2250 - total flux cleaned = 0.00805731 Jy ! Component: 2300 - total flux cleaned = 0.00787275 Jy ! Component: 2350 - total flux cleaned = 0.0076466 Jy ! Component: 2400 - total flux cleaned = 0.00744018 Jy ! Component: 2450 - total flux cleaned = 0.00719137 Jy ! Component: 2500 - total flux cleaned = 0.00694121 Jy ! Component: 2550 - total flux cleaned = 0.00664735 Jy ! Component: 2600 - total flux cleaned = 0.00637256 Jy ! Component: 2650 - total flux cleaned = 0.00607468 Jy ! Component: 2700 - total flux cleaned = 0.00579607 Jy ! Component: 2750 - total flux cleaned = 0.00551538 Jy ! Component: 2800 - total flux cleaned = 0.00518854 Jy ! Component: 2850 - total flux cleaned = 0.00485845 Jy ! Component: 2900 - total flux cleaned = 0.00448059 Jy ! Component: 2950 - total flux cleaned = 0.00407586 Jy ! Component: 3000 - total flux cleaned = 0.00375725 Jy ! Component: 3050 - total flux cleaned = 0.00341244 Jy ! Component: 3100 - total flux cleaned = 0.00304065 Jy ! Component: 3150 - total flux cleaned = 0.00261705 Jy ! Component: 3200 - total flux cleaned = 0.00228356 Jy ! Component: 3250 - total flux cleaned = 0.0018739 Jy ! Component: 3300 - total flux cleaned = 0.00148339 Jy ! Component: 3350 - total flux cleaned = 0.00111255 Jy ! Component: 3400 - total flux cleaned = 0.000661452 Jy ! Component: 3450 - total flux cleaned = 0.000254707 Jy ! Component: 3500 - total flux cleaned = -0.000183336 Jy ! Component: 3550 - total flux cleaned = -0.00065401 Jy ! Component: 3600 - total flux cleaned = -0.00110561 Jy ! Component: 3650 - total flux cleaned = -0.00156375 Jy ! Component: 3700 - total flux cleaned = -0.00208373 Jy ! Component: 3750 - total flux cleaned = -0.00261198 Jy ! Component: 3800 - total flux cleaned = -0.00317717 Jy ! Component: 3850 - total flux cleaned = -0.00372334 Jy ! Component: 3900 - total flux cleaned = -0.00433705 Jy ! Component: 3950 - total flux cleaned = -0.00493168 Jy ! Component: 4000 - total flux cleaned = -0.00550623 Jy ! Component: 4050 - total flux cleaned = -0.00609004 Jy ! Total flux subtracted in 4096 components = -0.00668377 Jy ! Clean residual min=-0.001921 max=0.001739 Jy/beam ! Clean residual mean=-0.000047 rms=0.000629 Jy/beam ! Combined flux in latest and established models = 0.108522 Jy keep ! Adding 475 model components to the UV plane model. ! The established model now contains 642 components and 0.108522 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsb_uvs/J0038+8447_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.954 x 15.91 at 13.55 degrees (North through East) ! Clean map min=-0.0029173 max=0.061834 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsb_uvs/J0038+8447_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0618344 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000529416 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.56855 2.56855 5.1371 10.2742 20.5484 41.0968 82.1937 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 quit ! Quitting program ! Log file /g0/scr/pima/npcsb_uvs/J0038+8447_S_uvs.log closed on Sat Oct 5 18:55:41 2013