! Started logfile: /g0/scr/pima/npcsa_uvs/J2344+8226_S_uvs.log on Sun Oct  6 10:35:54 2013
obs /g0/scr/pima/npcsa_uvs/J2344+8226_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J2344+8226_S_uva.fits
! AN table 1: 55 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.896566 visibilities/baseline/integration-bin.
! Found source: J2344+8226
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8876 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J2344+8226_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.327559Jy  sigma=11.475160
! Fit after  self-cal, rms=0.805860Jy  sigma=5.275148
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.093 mas, bmaj=11.26 mas, bpa=-3.687 degrees
! Estimated noise=5.16105 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.853868 Jy
! Component: 100  -  total flux cleaned = 1.24382 Jy
! Total flux subtracted in 100 components = 1.24382 Jy
! Clean residual min=-0.127456 max=0.201001 Jy/beam
! Clean residual mean=0.001539 rms=0.061564 Jy/beam
! Combined flux in latest and established models = 1.24382 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 48 components and 1.24382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.372814Jy  sigma=4.213400
! Fit after  self-cal, rms=0.368371Jy  sigma=4.208637
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.126 mas, bmaj=12.9 mas, bpa=-3.156 degrees
! Estimated noise=1.63383 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.346124 Jy
! Component: 100  -  total flux cleaned = 0.547013 Jy
! Component: 150  -  total flux cleaned = 0.673571 Jy
! Component: 200  -  total flux cleaned = 0.722185 Jy
! Total flux subtracted in 200 components = 0.722185 Jy
! Clean residual min=-0.053050 max=0.052792 Jy/beam
! Clean residual mean=0.000682 rms=0.023519 Jy/beam
! Combined flux in latest and established models = 1.966 Jy
! Performing phase self-cal
! Adding 130 model components to the UV plane model.
! The established model now contains 173 components and 1.966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206864Jy  sigma=1.715847
! Fit after  self-cal, rms=0.205153Jy  sigma=1.708299
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.97     HN        0.94     KP        0.96     
!   LA        1.06     MK        0.96     NL        1.07     OV        1.01     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.93     KP        0.97     
!   LA        1.03     MK        1.02     NL        1.08     OV        1.06     
!   PT        0.93     SC        1.09     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.04     HN        0.88     KP        1.01     
!   LA        0.88     MK        0.89     NL        1.18     OV        1.08     
!   PT        1.01     SC        1.19     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.04     HN        0.81     KP        0.93     
!   LA        0.76     MK        0.92     NL        1.06     OV        0.93     
!   PT        0.89     SC        1.30     
! 
! 
! Fit before self-cal, rms=0.205153Jy  sigma=1.708299
! Fit after  self-cal, rms=0.160739Jy  sigma=0.868314
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.216 mas, bmaj=12.97 mas, bpa=-3.005 degrees
! Estimated noise=1.57743 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0490185 Jy
! Component: 100  -  total flux cleaned = 0.0716257 Jy
! Component: 150  -  total flux cleaned = 0.0793417 Jy
! Component: 200  -  total flux cleaned = 0.0838366 Jy
! Total flux subtracted in 200 components = 0.0838366 Jy
! Clean residual min=-0.013224 max=0.013236 Jy/beam
! Clean residual mean=0.000020 rms=0.005331 Jy/beam
! Combined flux in latest and established models = 2.04984 Jy
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 255 components and 2.04984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146258Jy  sigma=0.637425
! Fit after  self-cal, rms=0.146240Jy  sigma=0.633935
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146240Jy  sigma=0.633935
! Fit after  self-cal, rms=0.147061Jy  sigma=0.628819
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.223 mas, bmaj=12.97 mas, bpa=-2.989 degrees
! Estimated noise=1.57247 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0158487 Jy
! Component: 100  -  total flux cleaned = 0.0220667 Jy
! Component: 150  -  total flux cleaned = 0.0226167 Jy
! Component: 200  -  total flux cleaned = 0.0225614 Jy
! Total flux subtracted in 200 components = 0.0225614 Jy
! Clean residual min=-0.007047 max=0.007034 Jy/beam
! Clean residual mean=0.000012 rms=0.002806 Jy/beam
! Combined flux in latest and established models = 2.0724 Jy
selfcal
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 323 components and 2.0724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143005Jy  sigma=0.588956
! Fit after  self-cal, rms=0.143001Jy  sigma=0.588358
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000930929 Jy
! Component: 100  -  total flux cleaned = 0.00056839 Jy
! Component: 150  -  total flux cleaned = -0.00111823 Jy
! Component: 200  -  total flux cleaned = -0.00301916 Jy
! Total flux subtracted in 200 components = -0.00301916 Jy
! Clean residual min=-0.005085 max=0.005105 Jy/beam
! Clean residual mean=0.000017 rms=0.001989 Jy/beam
! Combined flux in latest and established models = 2.06938 Jy
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 375 components and 2.06938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140699Jy  sigma=0.576616
! Fit after  self-cal, rms=0.140697Jy  sigma=0.576422
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140697Jy  sigma=0.576422
! Fit after  self-cal, rms=0.140377Jy  sigma=0.575402
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.197 mas, bmaj=12.96 mas, bpa=-2.978 degrees
! Estimated noise=1.56611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0039621 Jy
! Component: 100  -  total flux cleaned = -0.00454154 Jy
! Component: 150  -  total flux cleaned = -0.00589366 Jy
! Component: 200  -  total flux cleaned = -0.00769359 Jy
! Total flux subtracted in 200 components = -0.00769359 Jy
! Clean residual min=-0.004142 max=0.004117 Jy/beam
! Clean residual mean=0.000006 rms=0.001557 Jy/beam
! Combined flux in latest and established models = 2.06169 Jy
selfcal
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 413 components and 2.06169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138306Jy  sigma=0.569527
! Fit after  self-cal, rms=0.138297Jy  sigma=0.569419
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00275258 Jy
! Component: 100  -  total flux cleaned = -0.00413689 Jy
! Component: 150  -  total flux cleaned = -0.00523571 Jy
! Component: 200  -  total flux cleaned = -0.00671284 Jy
! Total flux subtracted in 200 components = -0.00671284 Jy
! Clean residual min=-0.003440 max=0.003430 Jy/beam
! Clean residual mean=0.000007 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 2.05497 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 441 components and 2.05497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136908Jy  sigma=0.565780
! Fit after  self-cal, rms=0.136890Jy  sigma=0.565706
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136890Jy  sigma=0.565706
! Fit after  self-cal, rms=0.136542Jy  sigma=0.564905
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.42 mas, bmaj=15.35 mas, bpa=5.325 degrees
! Estimated noise=1.1838 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00215787 Jy
! Component: 100  -  total flux cleaned = -0.00253109 Jy
! Component: 150  -  total flux cleaned = -0.00271555 Jy
! Component: 200  -  total flux cleaned = -0.00271289 Jy
! Total flux subtracted in 200 components = -0.00271289 Jy
! Clean residual min=-0.002843 max=0.002912 Jy/beam
! Clean residual mean=-0.000005 rms=0.001055 Jy/beam
! Combined flux in latest and established models = 2.05226 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 505 components and 2.05226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136177Jy  sigma=0.561227
! Fit after  self-cal, rms=0.136152Jy  sigma=0.561175
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136752 Jy
! Component: 100  -  total flux cleaned = 0.00151004 Jy
! Component: 150  -  total flux cleaned = 0.00217062 Jy
! Component: 200  -  total flux cleaned = 0.00280393 Jy
! Total flux subtracted in 200 components = 0.00280393 Jy
! Clean residual min=-0.002077 max=0.002100 Jy/beam
! Clean residual mean=0.000005 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 2.05506 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 557 components and 2.05506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135975Jy  sigma=0.558991
! Fit after  self-cal, rms=0.135966Jy  sigma=0.558962
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.177 mas, bmaj=12.96 mas, bpa=-2.987 degrees
! Estimated noise=1.56016 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.177 x 12.96 at -2.987 degrees (North through East)
! Clean map  min=-0.012044  max=0.94054 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135966Jy  sigma=0.558962
! Fit after  self-cal, rms=0.289076Jy  sigma=0.444041
! Inverting map and beam 
! Estimated beam: bmin=6.198 mas, bmaj=12.98 mas, bpa=-2.954 degrees
! Estimated noise=1.56221 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000687681 Jy
! Component: 100  -  total flux cleaned = -0.000152934 Jy
! Component: 150  -  total flux cleaned = 0.000513447 Jy
! Component: 200  -  total flux cleaned = 0.00114769 Jy
! Total flux subtracted in 200 components = 0.00114769 Jy
! Clean residual min=-0.002610 max=0.002591 Jy/beam
! Clean residual mean=0.000001 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 2.05621 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 590 components and 2.05621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.288457Jy  sigma=0.442672
! Fit after  self-cal, rms=0.288418Jy  sigma=0.442620
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000665661 Jy
! Component: 100  -  total flux cleaned = -6.78307e-05 Jy
! Component: 150  -  total flux cleaned = 0.000942412 Jy
! Component: 200  -  total flux cleaned = 0.00149901 Jy
! Total flux subtracted in 200 components = 0.00149901 Jy
! Clean residual min=-0.002297 max=0.002305 Jy/beam
! Clean residual mean=0.000000 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 2.05771 Jy
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 617 components and 2.05771 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.287947Jy  sigma=0.441552
! Fit after  self-cal, rms=0.287926Jy  sigma=0.441522
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.287926Jy  sigma=0.441522
! Fit after  self-cal, rms=0.286055Jy  sigma=0.441353
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.114 mas, bmaj=11.19 mas, bpa=-3.11 degrees
! Estimated noise=4.92737 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.815419 Jy
! Component: 100  -  total flux cleaned = 1.17846 Jy
! Component: 150  -  total flux cleaned = 1.40625 Jy
! Component: 200  -  total flux cleaned = 1.56198 Jy
! Total flux subtracted in 200 components = 1.56198 Jy
! Clean residual min=-0.066735 max=0.086607 Jy/beam
! Clean residual mean=0.000642 rms=0.029066 Jy/beam
! Combined flux in latest and established models = 1.56198 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 93 model components to the UV plane model.
! The established model now contains 93 components and 1.56198 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.165 mas, bmaj=12.98 mas, bpa=-2.862 degrees
! Estimated noise=1.55869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15463 Jy
! Component: 100  -  total flux cleaned = 0.221528 Jy
! Component: 150  -  total flux cleaned = 0.226871 Jy
! Component: 200  -  total flux cleaned = 0.243807 Jy
! Total flux subtracted in 200 components = 0.243807 Jy
! Clean residual min=-0.031373 max=0.031422 Jy/beam
! Clean residual mean=0.000215 rms=0.014212 Jy/beam
! Combined flux in latest and established models = 1.80579 Jy
! Adding 117 model components to the UV plane model.
! The established model now contains 198 components and 1.80579 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.42 mas, bmaj=15.37 mas, bpa=5.392 degrees
! Estimated noise=1.1828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000281792 Jy
! Component: 100  -  total flux cleaned = 0.0155808 Jy
! Component: 150  -  total flux cleaned = 0.0283862 Jy
! Component: 200  -  total flux cleaned = 0.0395393 Jy
! Total flux subtracted in 200 components = 0.0395393 Jy
! Clean residual min=-0.015291 max=0.015343 Jy/beam
! Clean residual mean=0.000120 rms=0.007573 Jy/beam
! Combined flux in latest and established models = 1.84533 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00415205 Jy
! Component: 100  -  total flux cleaned = -0.00400745 Jy
! Component: 150  -  total flux cleaned = -0.00395779 Jy
! Component: 200  -  total flux cleaned = -0.00591529 Jy
! Total flux subtracted in 200 components = -0.00591529 Jy
! Clean residual min=-0.007819 max=0.007860 Jy/beam
! Clean residual mean=0.000065 rms=0.003723 Jy/beam
! Combined flux in latest and established models = 1.83941 Jy
! Adding 174 model components to the UV plane model.
! The established model now contains 359 components and 1.83941 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.165 mas, bmaj=12.98 mas, bpa=-2.862 degrees
! Estimated noise=1.55869 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00284923 Jy
! Component: 100  -  total flux cleaned = -0.00571765 Jy
! Component: 150  -  total flux cleaned = -0.00790153 Jy
! Component: 200  -  total flux cleaned = -0.0105539 Jy
! Total flux subtracted in 200 components = -0.0105539 Jy
! Clean residual min=-0.005296 max=0.005323 Jy/beam
! Clean residual mean=0.000015 rms=0.001911 Jy/beam
! Combined flux in latest and established models = 1.82886 Jy
selfcal
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 413 components and 1.82886 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.288222Jy  sigma=0.463783
! Fit after  self-cal, rms=0.287559Jy  sigma=0.462231
wmodel /g0/scr/pima/npcsa_uvs/J2344+8226_S_map.mod
! Writing 413 model components to file: /g0/scr/pima/npcsa_uvs/J2344+8226_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J2344+8226_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J2344+8226_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J2344+8226_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsa_uvs/J2344+8226_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.165 x 12.98 at -2.862 degrees (North through East)
! Clean map  min=-0.021247  max=0.91375 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J2344+8226_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.913751 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00188516 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.618929 0.618929 1.23786 2.47572 4.95143 9.90286 19.8057 39.6115 79.2229
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0056 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.913 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J2344+8226_S_uvs.log closed on Sun Oct  6 10:35:58 2013