! Started logfile: /g0/scr/pima/npcsa_uvs/J2301+8200_S_uvs.log on Sun Oct 6 10:35:50 2013 obs /g0/scr/pima/npcsa_uvs/J2301+8200_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J2301+8200_S_uva.fits ! AN table 1: 55 integrations on 21 of 21 possible baselines. ! AN table 2: 55 integrations on 1 of 1 possible baselines. ! Apparent sampling: 0.909091 visibilities/baseline/integration-bin. ! Found source: J2301+8200 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4400 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J2301+8200_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 110 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.011923Jy sigma=0.916192 ! Fit after self-cal, rms=0.925192Jy sigma=0.782073 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=8.732 mas, bmaj=12 mas, bpa=16.75 degrees ! Estimated noise=22.9202 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0821172 Jy ! Component: 100 - total flux cleaned = 0.108042 Jy ! Total flux subtracted in 100 components = 0.108042 Jy ! Clean residual min=-0.018828 max=0.016706 Jy/beam ! Clean residual mean=0.000074 rms=0.005150 Jy/beam ! Combined flux in latest and established models = 0.108042 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.108042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099951Jy sigma=0.098721 ! Fit after self-cal, rms=0.098487Jy sigma=0.097802 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.446 mas, bmaj=13.41 mas, bpa=13.64 degrees ! Estimated noise=13.6244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221064 Jy ! Component: 100 - total flux cleaned = 0.0347212 Jy ! Component: 150 - total flux cleaned = 0.0424257 Jy ! Component: 200 - total flux cleaned = 0.047219 Jy ! Total flux subtracted in 200 components = 0.047219 Jy ! Clean residual min=-0.009926 max=0.010070 Jy/beam ! Clean residual mean=-0.000054 rms=0.002768 Jy/beam ! Combined flux in latest and established models = 0.155261 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 89 components and 0.155261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098509Jy sigma=0.088866 ! Fit after self-cal, rms=0.098395Jy sigma=0.088678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.88 KP 0.93 LA 1.00 ! NL 0.92 OV 0.96 PT 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.88 KP 0.97 LA 0.95 ! NL 0.92 OV 0.95 PT 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.95 KP 0.91 LA 0.79 ! NL 0.77 OV 1.02 PT 1.17 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.89 KP 0.81 LA 0.64 ! NL 0.83 OV 0.78 PT 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.098395Jy sigma=0.088678 ! Fit after self-cal, rms=0.085508Jy sigma=0.082109 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.333 mas, bmaj=13.23 mas, bpa=12.21 degrees ! Estimated noise=11.0384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0149074 Jy ! Component: 100 - total flux cleaned = -0.0182199 Jy ! Component: 150 - total flux cleaned = -0.0181072 Jy ! Component: 200 - total flux cleaned = -0.017908 Jy ! Total flux subtracted in 200 components = -0.017908 Jy ! Clean residual min=-0.005739 max=0.006614 Jy/beam ! Clean residual mean=-0.000020 rms=0.001670 Jy/beam ! Combined flux in latest and established models = 0.137353 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 101 components and 0.137353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078505Jy sigma=0.084549 ! Fit after self-cal, rms=0.078652Jy sigma=0.084385 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078652Jy sigma=0.084385 ! Fit after self-cal, rms=0.070868Jy sigma=0.081792 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.091 mas, bmaj=12.93 mas, bpa=10.75 degrees ! Estimated noise=9.08432 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0120061 Jy ! Component: 100 - total flux cleaned = -0.0148822 Jy ! Component: 150 - total flux cleaned = -0.0158111 Jy ! Component: 200 - total flux cleaned = -0.0158155 Jy ! Total flux subtracted in 200 components = -0.0158155 Jy ! Clean residual min=-0.004578 max=0.005182 Jy/beam ! Clean residual mean=-0.000016 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.121538 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 129 components and 0.121538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065242Jy sigma=0.084270 ! Fit after self-cal, rms=0.065137Jy sigma=0.084181 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.53894e-05 Jy ! Component: 100 - total flux cleaned = 0.0001182 Jy ! Component: 150 - total flux cleaned = 0.000176993 Jy ! Component: 200 - total flux cleaned = 0.000229584 Jy ! Total flux subtracted in 200 components = 0.000229584 Jy ! Clean residual min=-0.004778 max=0.005116 Jy/beam ! Clean residual mean=-0.000016 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.121767 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 144 components and 0.121767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065035Jy sigma=0.084239 ! Fit after self-cal, rms=0.065031Jy sigma=0.084231 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065031Jy sigma=0.084231 ! Fit after self-cal, rms=0.058721Jy sigma=0.081627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.844 mas, bmaj=12.67 mas, bpa=9.441 degrees ! Estimated noise=7.43117 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00953078 Jy ! Component: 100 - total flux cleaned = -0.0124056 Jy ! Component: 150 - total flux cleaned = -0.0138907 Jy ! Component: 200 - total flux cleaned = -0.0144807 Jy ! Total flux subtracted in 200 components = -0.0144807 Jy ! Clean residual min=-0.003612 max=0.004160 Jy/beam ! Clean residual mean=-0.000012 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.107287 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 160 components and 0.107287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054170Jy sigma=0.084091 ! Fit after self-cal, rms=0.054166Jy sigma=0.084068 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000140968 Jy ! Component: 100 - total flux cleaned = 0.000256702 Jy ! Component: 150 - total flux cleaned = 0.000276392 Jy ! Component: 200 - total flux cleaned = 0.000293825 Jy ! Total flux subtracted in 200 components = 0.000293825 Jy ! Clean residual min=-0.003709 max=0.004052 Jy/beam ! Clean residual mean=-0.000013 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.10758 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 170 components and 0.10758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054095Jy sigma=0.084129 ! Fit after self-cal, rms=0.054095Jy sigma=0.084124 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054095Jy sigma=0.084124 ! Fit after self-cal, rms=0.049211Jy sigma=0.081602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.771 mas, bmaj=13.54 mas, bpa=9.213 degrees ! Estimated noise=6.31866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00815528 Jy ! Component: 100 - total flux cleaned = -0.010727 Jy ! Component: 150 - total flux cleaned = -0.0120698 Jy ! Component: 200 - total flux cleaned = -0.0127702 Jy ! Total flux subtracted in 200 components = -0.0127702 Jy ! Clean residual min=-0.003279 max=0.003451 Jy/beam ! Clean residual mean=-0.000013 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.0948101 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 182 components and 0.0948102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045456Jy sigma=0.084101 ! Fit after self-cal, rms=0.045447Jy sigma=0.084067 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121645 Jy ! Component: 100 - total flux cleaned = -5.16864e-05 Jy ! Component: 150 - total flux cleaned = -2.70197e-05 Jy ! Component: 200 - total flux cleaned = -3.49402e-06 Jy ! Total flux subtracted in 200 components = -3.49402e-06 Jy ! Clean residual min=-0.003303 max=0.003455 Jy/beam ! Clean residual mean=-0.000013 rms=0.001008 Jy/beam ! Combined flux in latest and established models = 0.0948067 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 184 components and 0.0948067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045414Jy sigma=0.084081 ! Fit after self-cal, rms=0.045415Jy sigma=0.084077 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=8.627 mas, bmaj=12.45 mas, bpa=8.461 degrees ! Estimated noise=6.09816 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.627 x 12.45 at 8.461 degrees (North through East) ! Clean map min=-0.0028191 max=0.049695 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.185 mas, bmaj=11.21 mas, bpa=11.57 degrees ! Estimated noise=9.75422 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0360051 Jy ! Component: 100 - total flux cleaned = 0.0515104 Jy ! Component: 150 - total flux cleaned = 0.0622414 Jy ! Component: 200 - total flux cleaned = 0.0701852 Jy ! Total flux subtracted in 200 components = 0.0701852 Jy ! Clean residual min=-0.005949 max=0.005918 Jy/beam ! Clean residual mean=0.000038 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.0701852 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 82 model components to the UV plane model. ! The established model now contains 82 components and 0.0701852 Jy ! Inverting map and beam ! Estimated beam: bmin=8.627 mas, bmaj=12.45 mas, bpa=8.461 degrees ! Estimated noise=6.09816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00766798 Jy ! Component: 100 - total flux cleaned = 0.0125887 Jy ! Component: 150 - total flux cleaned = 0.0158972 Jy ! Component: 200 - total flux cleaned = 0.01822 Jy ! Total flux subtracted in 200 components = 0.01822 Jy ! Clean residual min=-0.003372 max=0.003658 Jy/beam ! Clean residual mean=-0.000004 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.0884052 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 123 components and 0.0884052 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.771 mas, bmaj=13.54 mas, bpa=9.213 degrees ! Estimated noise=6.31866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204848 Jy ! Component: 100 - total flux cleaned = 0.00341097 Jy ! Component: 150 - total flux cleaned = 0.00434533 Jy ! Component: 200 - total flux cleaned = 0.00497763 Jy ! Total flux subtracted in 200 components = 0.00497763 Jy ! Clean residual min=-0.003440 max=0.003640 Jy/beam ! Clean residual mean=-0.000012 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.0933829 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209979 Jy ! Component: 100 - total flux cleaned = 0.000362745 Jy ! Component: 150 - total flux cleaned = 0.000503803 Jy ! Component: 200 - total flux cleaned = 0.000648793 Jy ! Total flux subtracted in 200 components = 0.000648793 Jy ! Clean residual min=-0.003404 max=0.003635 Jy/beam ! Clean residual mean=-0.000013 rms=0.001036 Jy/beam ! Combined flux in latest and established models = 0.0940316 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 154 components and 0.0940316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=8.627 mas, bmaj=12.45 mas, bpa=8.461 degrees ! Estimated noise=6.09816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.48028e-05 Jy ! Component: 100 - total flux cleaned = -3.35813e-05 Jy ! Component: 150 - total flux cleaned = -3.95346e-06 Jy ! Component: 200 - total flux cleaned = 3.8225e-05 Jy ! Total flux subtracted in 200 components = 3.8225e-05 Jy ! Clean residual min=-0.002904 max=0.003391 Jy/beam ! Clean residual mean=-0.000010 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0940699 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 168 components and 0.0940699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045417Jy sigma=0.084207 ! Fit after self-cal, rms=0.045418Jy sigma=0.084181 wmodel /g0/scr/pima/npcsa_uvs/J2301+8200_S_map.mod ! Writing 168 model components to file: /g0/scr/pima/npcsa_uvs/J2301+8200_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J2301+8200_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J2301+8200_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J2301+8200_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J2301+8200_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000668395 Jy ! Component: 100 - total flux cleaned = 0.000622502 Jy ! Component: 150 - total flux cleaned = 0.000663895 Jy ! Component: 200 - total flux cleaned = 0.000664227 Jy ! Component: 250 - total flux cleaned = 0.000372998 Jy ! Component: 300 - total flux cleaned = 0.000222309 Jy ! Component: 350 - total flux cleaned = 0.000305727 Jy ! Component: 400 - total flux cleaned = 0.000331187 Jy ! Component: 450 - total flux cleaned = 0.00045742 Jy ! Component: 500 - total flux cleaned = 0.000529793 Jy ! Component: 550 - total flux cleaned = 0.000553517 Jy ! Component: 600 - total flux cleaned = 0.000621262 Jy ! Component: 650 - total flux cleaned = 0.00066426 Jy ! Component: 700 - total flux cleaned = 0.00072595 Jy ! Component: 750 - total flux cleaned = 0.000685893 Jy ! Component: 800 - total flux cleaned = 0.000686266 Jy ! Component: 850 - total flux cleaned = 0.000629795 Jy ! Component: 900 - total flux cleaned = 0.00061142 Jy ! Component: 950 - total flux cleaned = 0.000575979 Jy ! Component: 1000 - total flux cleaned = 0.000541681 Jy ! Component: 1050 - total flux cleaned = 0.000525245 Jy ! Component: 1100 - total flux cleaned = 0.000574416 Jy ! Component: 1150 - total flux cleaned = 0.000574288 Jy ! Component: 1200 - total flux cleaned = 0.0006368 Jy ! Component: 1250 - total flux cleaned = 0.000667104 Jy ! Component: 1300 - total flux cleaned = 0.00069711 Jy ! Component: 1350 - total flux cleaned = 0.000711915 Jy ! Component: 1400 - total flux cleaned = 0.000799019 Jy ! Component: 1450 - total flux cleaned = 0.000841835 Jy ! Component: 1500 - total flux cleaned = 0.00091245 Jy ! Component: 1550 - total flux cleaned = 0.000968044 Jy ! Component: 1600 - total flux cleaned = 0.00103673 Jy ! Component: 1650 - total flux cleaned = 0.00109079 Jy ! Component: 1700 - total flux cleaned = 0.00105057 Jy ! Component: 1750 - total flux cleaned = 0.00105055 Jy ! Component: 1800 - total flux cleaned = 0.00102437 Jy ! Component: 1850 - total flux cleaned = 0.0010114 Jy ! Component: 1900 - total flux cleaned = 0.0009728 Jy ! Component: 1950 - total flux cleaned = 0.000972791 Jy ! Component: 2000 - total flux cleaned = 0.000947385 Jy ! Component: 2050 - total flux cleaned = 0.000909661 Jy ! Component: 2100 - total flux cleaned = 0.000884738 Jy ! Component: 2150 - total flux cleaned = 0.000884777 Jy ! Component: 2200 - total flux cleaned = 0.000860088 Jy ! Component: 2250 - total flux cleaned = 0.000860157 Jy ! Component: 2300 - total flux cleaned = 0.000823624 Jy ! Component: 2350 - total flux cleaned = 0.000799531 Jy ! Component: 2400 - total flux cleaned = 0.00078745 Jy ! Component: 2450 - total flux cleaned = 0.000751581 Jy ! Component: 2500 - total flux cleaned = 0.000704128 Jy ! Component: 2550 - total flux cleaned = 0.00066878 Jy ! Component: 2600 - total flux cleaned = 0.00061008 Jy ! Component: 2650 - total flux cleaned = 0.000563332 Jy ! Component: 2700 - total flux cleaned = 0.000516846 Jy ! Component: 2750 - total flux cleaned = 0.000470505 Jy ! Component: 2800 - total flux cleaned = 0.000435926 Jy ! Component: 2850 - total flux cleaned = 0.000389954 Jy ! Component: 2900 - total flux cleaned = 0.000321346 Jy ! Component: 2950 - total flux cleaned = 0.000275747 Jy ! Component: 3000 - total flux cleaned = 0.000196225 Jy ! Component: 3050 - total flux cleaned = 0.000128218 Jy ! Component: 3100 - total flux cleaned = 7.17284e-05 Jy ! Component: 3150 - total flux cleaned = 3.94137e-06 Jy ! Component: 3200 - total flux cleaned = -6.37609e-05 Jy ! Component: 3250 - total flux cleaned = -0.00012008 Jy ! Component: 3300 - total flux cleaned = -0.000131312 Jy ! Component: 3350 - total flux cleaned = -0.000210017 Jy ! Component: 3400 - total flux cleaned = -0.000255013 Jy ! Component: 3450 - total flux cleaned = -0.000299963 Jy ! Component: 3500 - total flux cleaned = -0.000344946 Jy ! Component: 3550 - total flux cleaned = -0.000401245 Jy ! Component: 3600 - total flux cleaned = -0.000457709 Jy ! Component: 3650 - total flux cleaned = -0.000514371 Jy ! Component: 3700 - total flux cleaned = -0.000548439 Jy ! Component: 3750 - total flux cleaned = -0.000605336 Jy ! Component: 3800 - total flux cleaned = -0.000639388 Jy ! Component: 3850 - total flux cleaned = -0.000685102 Jy ! Component: 3900 - total flux cleaned = -0.000742345 Jy ! Component: 3950 - total flux cleaned = -0.000776721 Jy ! Component: 4000 - total flux cleaned = -0.000857317 Jy ! Component: 4050 - total flux cleaned = -0.000891934 Jy ! Total flux subtracted in 4096 components = -0.000961435 Jy ! Clean residual min=-0.000709 max=0.000668 Jy/beam ! Clean residual mean=-0.000002 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.0931084 Jy keep ! Adding 387 model components to the UV plane model. ! The established model now contains 555 components and 0.0931085 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J2301+8200_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 8.627 x 12.45 at 8.461 degrees (North through East) ! Clean map min=-0.0016822 max=0.048821 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J2301+8200_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0488215 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000235906 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.4496 1.4496 2.89921 5.79842 11.5968 23.1937 46.3873 92.7747 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.048 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J2301+8200_S_uvs.log closed on Sun Oct 6 10:35:54 2013