! Started logfile: /g0/scr/pima/npcsa_uvs/J2149+7540_X_uvs.log on Sun Oct 6 10:30:28 2013 obs /g0/scr/pima/npcsa_uvs/J2149+7540_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J2149+7540_X_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.726337 visibilities/baseline/integration-bin. ! Found source: J2149+7540 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7060 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J2149+7540_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006023Jy sigma=0.761914 ! Fit after self-cal, rms=0.956870Jy sigma=0.684832 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7225 mas, bmaj=2.947 mas, bpa=-9.811 degrees ! Estimated noise=25.0754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0580294 Jy ! Component: 100 - total flux cleaned = 0.0664569 Jy ! Total flux subtracted in 100 components = 0.0664569 Jy ! Clean residual min=-0.009122 max=0.009649 Jy/beam ! Clean residual mean=0.000000 rms=0.002175 Jy/beam ! Combined flux in latest and established models = 0.0664569 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0664569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088257Jy sigma=0.073122 ! Fit after self-cal, rms=0.085864Jy sigma=0.071283 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9362 mas, bmaj=3.039 mas, bpa=-10.69 degrees ! Estimated noise=12.6211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00396737 Jy ! Component: 100 - total flux cleaned = 0.00405572 Jy ! Component: 150 - total flux cleaned = 0.0040493 Jy ! Component: 200 - total flux cleaned = 0.00415375 Jy ! Total flux subtracted in 200 components = 0.00415375 Jy ! Clean residual min=-0.004836 max=0.004190 Jy/beam ! Clean residual mean=0.000003 rms=0.001098 Jy/beam ! Combined flux in latest and established models = 0.0706106 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0706106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087272Jy sigma=0.069901 ! Fit after self-cal, rms=0.087187Jy sigma=0.069854 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.82 HN 0.85 KP 0.97 ! LA 1.05 MK 0.86 NL 0.93 OV 0.92 ! PT 1.04 SC 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.95 HN 0.88 KP 0.84 ! LA 0.84 MK 0.86 NL 1.05 OV 0.82 ! PT 1.01 SC 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.86 HN 0.81 KP 0.70 ! LA 0.86 MK 0.90 NL 0.90 OV 0.90 ! PT 0.87 SC 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.89 HN 0.83 KP 0.72 ! LA 0.81 MK 0.78 NL 0.84 OV 0.91 ! PT 1.02 SC 0.77 ! ! ! Fit before self-cal, rms=0.087187Jy sigma=0.069854 ! Fit after self-cal, rms=0.072864Jy sigma=0.066553 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9241 mas, bmaj=3.012 mas, bpa=-10.46 degrees ! Estimated noise=9.51921 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0139023 Jy ! Component: 100 - total flux cleaned = -0.0164121 Jy ! Component: 150 - total flux cleaned = -0.0161501 Jy ! Component: 200 - total flux cleaned = -0.0159896 Jy ! Total flux subtracted in 200 components = -0.0159896 Jy ! Clean residual min=-0.002846 max=0.002393 Jy/beam ! Clean residual mean=0.000000 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.054621 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 24 components and 0.054621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065808Jy sigma=0.068811 ! Fit after self-cal, rms=0.065902Jy sigma=0.068727 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065902Jy sigma=0.068727 ! Fit after self-cal, rms=0.056140Jy sigma=0.066409 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9274 mas, bmaj=3.009 mas, bpa=-10.42 degrees ! Estimated noise=7.30436 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0106416 Jy ! Component: 100 - total flux cleaned = -0.0127887 Jy ! Component: 150 - total flux cleaned = -0.0128508 Jy ! Component: 200 - total flux cleaned = -0.0128067 Jy ! Total flux subtracted in 200 components = -0.0128067 Jy ! Clean residual min=-0.002193 max=0.001799 Jy/beam ! Clean residual mean=0.000000 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.0418143 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 0.0418143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050769Jy sigma=0.068680 ! Fit after self-cal, rms=0.050797Jy sigma=0.068671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000158025 Jy ! Component: 100 - total flux cleaned = 0.00019728 Jy ! Component: 150 - total flux cleaned = 0.000230626 Jy ! Component: 200 - total flux cleaned = 0.000272703 Jy ! Total flux subtracted in 200 components = 0.000272703 Jy ! Clean residual min=-0.002251 max=0.001822 Jy/beam ! Clean residual mean=0.000000 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.042087 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 31 components and 0.042087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050743Jy sigma=0.068709 ! Fit after self-cal, rms=0.050745Jy sigma=0.068704 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050745Jy sigma=0.068704 ! Fit after self-cal, rms=0.042969Jy sigma=0.066354 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9318 mas, bmaj=3.009 mas, bpa=-10.37 degrees ! Estimated noise=5.57944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00811931 Jy ! Component: 100 - total flux cleaned = -0.00986538 Jy ! Component: 150 - total flux cleaned = -0.00984186 Jy ! Component: 200 - total flux cleaned = -0.00985757 Jy ! Total flux subtracted in 200 components = -0.00985757 Jy ! Clean residual min=-0.001690 max=0.001402 Jy/beam ! Clean residual mean=-0.000000 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0322294 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 0.0322294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038868Jy sigma=0.068634 ! Fit after self-cal, rms=0.038875Jy sigma=0.068625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.21825e-05 Jy ! Component: 100 - total flux cleaned = -6.88821e-05 Jy ! Component: 150 - total flux cleaned = -4.06182e-05 Jy ! Component: 200 - total flux cleaned = -1.64605e-05 Jy ! Total flux subtracted in 200 components = -1.64605e-05 Jy ! Clean residual min=-0.001694 max=0.001423 Jy/beam ! Clean residual mean=0.000000 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.032213 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.032213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038831Jy sigma=0.068677 ! Fit after self-cal, rms=0.038832Jy sigma=0.068675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.038832Jy sigma=0.068675 ! Fit after self-cal, rms=0.032856Jy sigma=0.066320 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=3.299 mas, bpa=-14.43 degrees ! Estimated noise=5.46186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00584286 Jy ! Component: 100 - total flux cleaned = -0.00714414 Jy ! Component: 150 - total flux cleaned = -0.00759219 Jy ! Component: 200 - total flux cleaned = -0.0077656 Jy ! Total flux subtracted in 200 components = -0.0077656 Jy ! Clean residual min=-0.001168 max=0.001069 Jy/beam ! Clean residual mean=-0.000000 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0244473 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 0.0244473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.029878Jy sigma=0.068357 ! Fit after self-cal, rms=0.029874Jy sigma=0.068344 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144761 Jy ! Component: 100 - total flux cleaned = -0.000150486 Jy ! Component: 150 - total flux cleaned = -0.000155904 Jy ! Component: 200 - total flux cleaned = -0.000160973 Jy ! Total flux subtracted in 200 components = -0.000160973 Jy ! Clean residual min=-0.001140 max=0.001058 Jy/beam ! Clean residual mean=0.000000 rms=0.000324 Jy/beam ! Combined flux in latest and established models = 0.0242864 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 49 components and 0.0242864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.029813Jy sigma=0.068446 ! Fit after self-cal, rms=0.029807Jy sigma=0.068443 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9356 mas, bmaj=3.012 mas, bpa=-10.29 degrees ! Estimated noise=4.25944 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9356 x 3.012 at -10.29 degrees (North through East) ! Clean map min=-0.0011743 max=0.025145 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7192 mas, bmaj=2.949 mas, bpa=-9.563 degrees ! Estimated noise=8.43507 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204659 Jy ! Component: 100 - total flux cleaned = 0.0232329 Jy ! Component: 150 - total flux cleaned = 0.0230953 Jy ! Component: 200 - total flux cleaned = 0.0228205 Jy ! Total flux subtracted in 200 components = 0.0228205 Jy ! Clean residual min=-0.002671 max=0.002745 Jy/beam ! Clean residual mean=-0.000000 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.0228205 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0228205 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9356 mas, bmaj=3.012 mas, bpa=-10.29 degrees ! Estimated noise=4.25944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010568 Jy ! Component: 100 - total flux cleaned = 0.00123798 Jy ! Component: 150 - total flux cleaned = 0.0013648 Jy ! Component: 200 - total flux cleaned = 0.00136494 Jy ! Total flux subtracted in 200 components = 0.00136494 Jy ! Clean residual min=-0.001330 max=0.001162 Jy/beam ! Clean residual mean=0.000000 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0241854 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 0.0241854 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.118 mas, bmaj=3.299 mas, bpa=-14.43 degrees ! Estimated noise=5.46186 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.78103e-05 Jy ! Component: 100 - total flux cleaned = 9.84645e-07 Jy ! Component: 150 - total flux cleaned = 3.91836e-05 Jy ! Component: 200 - total flux cleaned = 7.24478e-05 Jy ! Total flux subtracted in 200 components = 7.24478e-05 Jy ! Clean residual min=-0.001017 max=0.001036 Jy/beam ! Clean residual mean=0.000000 rms=0.000303 Jy/beam ! Combined flux in latest and established models = 0.0242579 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.87822e-05 Jy ! Component: 100 - total flux cleaned = 4.57263e-05 Jy ! Component: 150 - total flux cleaned = 4.59204e-05 Jy ! Component: 200 - total flux cleaned = 3.90671e-05 Jy ! Total flux subtracted in 200 components = 3.90671e-05 Jy ! Clean residual min=-0.000988 max=0.001032 Jy/beam ! Clean residual mean=0.000000 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.024297 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 49 components and 0.024297 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9356 mas, bmaj=3.012 mas, bpa=-10.29 degrees ! Estimated noise=4.25944 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.2411e-05 Jy ! Component: 100 - total flux cleaned = 0.000109912 Jy ! Component: 150 - total flux cleaned = 0.000142248 Jy ! Component: 200 - total flux cleaned = 0.000171734 Jy ! Total flux subtracted in 200 components = 0.000171734 Jy ! Clean residual min=-0.001250 max=0.001071 Jy/beam ! Clean residual mean=0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0244687 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.0244687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.029640Jy sigma=0.068655 ! Fit after self-cal, rms=0.029644Jy sigma=0.068632 wmodel /g0/scr/pima/npcsa_uvs/J2149+7540_X_map.mod ! Writing 65 model components to file: /g0/scr/pima/npcsa_uvs/J2149+7540_X_map.mod wobs /g0/scr/pima/npcsa_uvs/J2149+7540_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J2149+7540_X_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J2149+7540_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J2149+7540_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000511884 Jy ! Component: 100 - total flux cleaned = -0.000787506 Jy ! Component: 150 - total flux cleaned = -0.000970584 Jy ! Component: 200 - total flux cleaned = -0.00103902 Jy ! Component: 250 - total flux cleaned = -0.00117078 Jy ! Component: 300 - total flux cleaned = -0.00123463 Jy ! Component: 350 - total flux cleaned = -0.00126567 Jy ! Component: 400 - total flux cleaned = -0.00126583 Jy ! Component: 450 - total flux cleaned = -0.00126599 Jy ! Component: 500 - total flux cleaned = -0.0012516 Jy ! Component: 550 - total flux cleaned = -0.00120941 Jy ! Component: 600 - total flux cleaned = -0.00120975 Jy ! Component: 650 - total flux cleaned = -0.00125061 Jy ! Component: 700 - total flux cleaned = -0.00125037 Jy ! Component: 750 - total flux cleaned = -0.00122409 Jy ! Component: 800 - total flux cleaned = -0.00117275 Jy ! Component: 850 - total flux cleaned = -0.0011728 Jy ! Component: 900 - total flux cleaned = -0.00114752 Jy ! Component: 950 - total flux cleaned = -0.00111049 Jy ! Component: 1000 - total flux cleaned = -0.00109828 Jy ! Component: 1050 - total flux cleaned = -0.00106255 Jy ! Component: 1100 - total flux cleaned = -0.0010156 Jy ! Component: 1150 - total flux cleaned = -0.00101567 Jy ! Component: 1200 - total flux cleaned = -0.000992693 Jy ! Component: 1250 - total flux cleaned = -0.00098138 Jy ! Component: 1300 - total flux cleaned = -0.000981422 Jy ! Component: 1350 - total flux cleaned = -0.000926275 Jy ! Component: 1400 - total flux cleaned = -0.000969872 Jy ! Component: 1450 - total flux cleaned = -0.000915783 Jy ! Component: 1500 - total flux cleaned = -0.000894637 Jy ! Component: 1550 - total flux cleaned = -0.000894461 Jy ! Component: 1600 - total flux cleaned = -0.000904852 Jy ! Component: 1650 - total flux cleaned = -0.000853068 Jy ! Component: 1700 - total flux cleaned = -0.000853239 Jy ! Component: 1750 - total flux cleaned = -0.000873545 Jy ! Component: 1800 - total flux cleaned = -0.000863408 Jy ! Component: 1850 - total flux cleaned = -0.000863209 Jy ! Component: 1900 - total flux cleaned = -0.000843483 Jy ! Component: 1950 - total flux cleaned = -0.000853284 Jy ! Component: 2000 - total flux cleaned = -0.000833772 Jy ! Component: 2050 - total flux cleaned = -0.000843423 Jy ! Component: 2100 - total flux cleaned = -0.000833848 Jy ! Component: 2150 - total flux cleaned = -0.000815105 Jy ! Component: 2200 - total flux cleaned = -0.00081505 Jy ! Component: 2250 - total flux cleaned = -0.00080582 Jy ! Component: 2300 - total flux cleaned = -0.00081505 Jy ! Component: 2350 - total flux cleaned = -0.000833314 Jy ! Component: 2400 - total flux cleaned = -0.000842422 Jy ! Component: 2450 - total flux cleaned = -0.000851321 Jy ! Component: 2500 - total flux cleaned = -0.000869094 Jy ! Component: 2550 - total flux cleaned = -0.000860194 Jy ! Component: 2600 - total flux cleaned = -0.000877749 Jy ! Component: 2650 - total flux cleaned = -0.000912468 Jy ! Component: 2700 - total flux cleaned = -0.000903768 Jy ! Component: 2750 - total flux cleaned = -0.000886691 Jy ! Component: 2800 - total flux cleaned = -0.000903732 Jy ! Component: 2850 - total flux cleaned = -0.000912162 Jy ! Component: 2900 - total flux cleaned = -0.000928843 Jy ! Component: 2950 - total flux cleaned = -0.000937052 Jy ! Component: 3000 - total flux cleaned = -0.0009454 Jy ! Component: 3050 - total flux cleaned = -0.000961689 Jy ! Component: 3100 - total flux cleaned = -0.000961671 Jy ! Component: 3150 - total flux cleaned = -0.000985756 Jy ! Component: 3200 - total flux cleaned = -0.000961803 Jy ! Component: 3250 - total flux cleaned = -0.000993552 Jy ! Component: 3300 - total flux cleaned = -0.000969929 Jy ! Component: 3350 - total flux cleaned = -0.00100902 Jy ! Component: 3400 - total flux cleaned = -0.00102456 Jy ! Component: 3450 - total flux cleaned = -0.00102457 Jy ! Component: 3500 - total flux cleaned = -0.00103226 Jy ! Component: 3550 - total flux cleaned = -0.0010628 Jy ! Component: 3600 - total flux cleaned = -0.00107037 Jy ! Component: 3650 - total flux cleaned = -0.00107795 Jy ! Component: 3700 - total flux cleaned = -0.00109291 Jy ! Component: 3750 - total flux cleaned = -0.00110044 Jy ! Component: 3800 - total flux cleaned = -0.00110783 Jy ! Component: 3850 - total flux cleaned = -0.00110052 Jy ! Component: 3900 - total flux cleaned = -0.00111521 Jy ! Component: 3950 - total flux cleaned = -0.00113714 Jy ! Component: 4000 - total flux cleaned = -0.00115162 Jy ! Component: 4050 - total flux cleaned = -0.0011805 Jy ! Total flux subtracted in 4096 components = -0.00117324 Jy ! Clean residual min=-0.000453 max=0.000388 Jy/beam ! Clean residual mean=0.000000 rms=0.000127 Jy/beam ! Combined flux in latest and established models = 0.0232955 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 338 components and 0.0232954 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J2149+7540_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9356 x 3.012 at -10.29 degrees (North through East) ! Clean map min=-0.0011868 max=0.025033 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J2149+7540_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0250332 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000126047 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.51056 1.51056 3.02112 6.04224 12.0845 24.169 48.3379 96.6759 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.025 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J2149+7540_X_uvs.log closed on Sun Oct 6 10:30:33 2013