! Started logfile: /g0/scr/pima/npcsa_uvs/J1725+7708_X_uvs.log on Sun Oct  6 10:29:41 2013
obs /g0/scr/pima/npcsa_uvs/J1725+7708_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1725+7708_X_uva.fits
! AN table 1: 55 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.689899 visibilities/baseline/integration-bin.
! Found source: J1725+7708
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5464 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1725+7708_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005381Jy  sigma=0.841363
! Fit after  self-cal, rms=0.939261Jy  sigma=0.738660
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6551 mas, bmaj=3.758 mas, bpa=-7.475 degrees
! Estimated noise=22.5492 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0709638 Jy
! Component: 100  -  total flux cleaned = 0.0886637 Jy
! Total flux subtracted in 100 components = 0.0886637 Jy
! Clean residual min=-0.007631 max=0.007506 Jy/beam
! Clean residual mean=-0.000001 rms=0.001877 Jy/beam
! Combined flux in latest and established models = 0.0886637 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0886637 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089909Jy  sigma=0.078708
! Fit after  self-cal, rms=0.087445Jy  sigma=0.076811
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8464 mas, bmaj=3.762 mas, bpa=-8.605 degrees
! Estimated noise=12.9541 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113058 Jy
! Component: 100  -  total flux cleaned = 0.0170562 Jy
! Component: 150  -  total flux cleaned = 0.0203051 Jy
! Component: 200  -  total flux cleaned = 0.0223517 Jy
! Total flux subtracted in 200 components = 0.0223517 Jy
! Clean residual min=-0.005545 max=0.005076 Jy/beam
! Clean residual mean=-0.000003 rms=0.001342 Jy/beam
! Combined flux in latest and established models = 0.111015 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 23 components and 0.111015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089267Jy  sigma=0.073323
! Fit after  self-cal, rms=0.088948Jy  sigma=0.073186
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.99     KP        0.97     
!   LA        0.99     MK        1.02     NL        0.88     OV        0.80     
!   SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.93     HN        0.93     KP        0.86     
!   LA        0.89     MK        0.83     NL        0.96     OV        0.90     
!   SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.77     KP        0.78     
!   LA        0.90     MK        0.83     NL        0.89     OV        0.93     
!   SC        0.85     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.01     HN        0.93     KP        0.80     
!   LA        0.87     MK        0.77     NL        0.84     OV        0.88     
!   SC        0.88     
! 
! 
! Fit before self-cal, rms=0.088948Jy  sigma=0.073186
! Fit after  self-cal, rms=0.078477Jy  sigma=0.069711
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8361 mas, bmaj=3.785 mas, bpa=-8.412 degrees
! Estimated noise=10.3939 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0139913 Jy
! Component: 100  -  total flux cleaned = -0.0165955 Jy
! Component: 150  -  total flux cleaned = -0.0166014 Jy
! Component: 200  -  total flux cleaned = -0.0164688 Jy
! Total flux subtracted in 200 components = -0.0164688 Jy
! Clean residual min=-0.003478 max=0.003659 Jy/beam
! Clean residual mean=0.000000 rms=0.000863 Jy/beam
! Combined flux in latest and established models = 0.0945467 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 42 components and 0.0945467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071492Jy  sigma=0.072022
! Fit after  self-cal, rms=0.071460Jy  sigma=0.071958
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071460Jy  sigma=0.071958
! Fit after  self-cal, rms=0.064072Jy  sigma=0.069649
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8301 mas, bmaj=3.782 mas, bpa=-8.349 degrees
! Estimated noise=8.51295 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0111674 Jy
! Component: 100  -  total flux cleaned = -0.013888 Jy
! Component: 150  -  total flux cleaned = -0.0148339 Jy
! Component: 200  -  total flux cleaned = -0.0148987 Jy
! Total flux subtracted in 200 components = -0.0148987 Jy
! Clean residual min=-0.002786 max=0.002911 Jy/beam
! Clean residual mean=0.000001 rms=0.000694 Jy/beam
! Combined flux in latest and established models = 0.0796481 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 50 components and 0.0796481 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058567Jy  sigma=0.071898
! Fit after  self-cal, rms=0.058530Jy  sigma=0.071883
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.29196e-06 Jy
! Component: 100  -  total flux cleaned = 3.57548e-05 Jy
! Component: 150  -  total flux cleaned = 8.39097e-05 Jy
! Component: 200  -  total flux cleaned = 0.000112259 Jy
! Total flux subtracted in 200 components = 0.000112259 Jy
! Clean residual min=-0.002800 max=0.002954 Jy/beam
! Clean residual mean=0.000000 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.0797603 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.0797603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058419Jy  sigma=0.071980
! Fit after  self-cal, rms=0.058412Jy  sigma=0.071979
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058412Jy  sigma=0.071979
! Fit after  self-cal, rms=0.052317Jy  sigma=0.069629
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8228 mas, bmaj=3.78 mas, bpa=-8.276 degrees
! Estimated noise=6.99594 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00872255 Jy
! Component: 100  -  total flux cleaned = -0.0110433 Jy
! Component: 150  -  total flux cleaned = -0.0121461 Jy
! Component: 200  -  total flux cleaned = -0.012497 Jy
! Total flux subtracted in 200 components = -0.012497 Jy
! Clean residual min=-0.002225 max=0.002342 Jy/beam
! Clean residual mean=0.000000 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.0672633 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 56 components and 0.0672633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048052Jy  sigma=0.071866
! Fit after  self-cal, rms=0.048039Jy  sigma=0.071858
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000170217 Jy
! Component: 100  -  total flux cleaned = -0.00019296 Jy
! Component: 150  -  total flux cleaned = -0.000166751 Jy
! Component: 200  -  total flux cleaned = -0.000151365 Jy
! Total flux subtracted in 200 components = -0.000151365 Jy
! Clean residual min=-0.002259 max=0.002361 Jy/beam
! Clean residual mean=0.000000 rms=0.000568 Jy/beam
! Combined flux in latest and established models = 0.067112 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 62 components and 0.0671119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047963Jy  sigma=0.071952
! Fit after  self-cal, rms=0.047963Jy  sigma=0.071951
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.047963Jy  sigma=0.071951
! Fit after  self-cal, rms=0.043004Jy  sigma=0.069605
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.773 mas, bmaj=4.086 mas, bpa=-13.48 degrees
! Estimated noise=7.5708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00715242 Jy
! Component: 100  -  total flux cleaned = -0.00887449 Jy
! Component: 150  -  total flux cleaned = -0.00964787 Jy
! Component: 200  -  total flux cleaned = -0.010072 Jy
! Total flux subtracted in 200 components = -0.010072 Jy
! Clean residual min=-0.002584 max=0.002603 Jy/beam
! Clean residual mean=0.000001 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.05704 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 76 components and 0.05704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039567Jy  sigma=0.071805
! Fit after  self-cal, rms=0.039524Jy  sigma=0.071726
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.70488e-05 Jy
! Component: 100  -  total flux cleaned = -9.7659e-05 Jy
! Component: 150  -  total flux cleaned = -8.80145e-05 Jy
! Component: 200  -  total flux cleaned = -7.91873e-05 Jy
! Total flux subtracted in 200 components = -7.91873e-05 Jy
! Clean residual min=-0.002658 max=0.002589 Jy/beam
! Clean residual mean=0.000000 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.0569608 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 81 components and 0.0569608 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039490Jy  sigma=0.071782
! Fit after  self-cal, rms=0.039486Jy  sigma=0.071777
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8155 mas, bmaj=3.781 mas, bpa=-8.202 degrees
! Estimated noise=5.75243 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8155 x 3.781 at -8.202 degrees (North through East)
! Clean map  min=-0.0016428  max=0.042614 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6343 mas, bmaj=3.8 mas, bpa=-7.133 degrees
! Estimated noise=9.68212 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0311964 Jy
! Component: 100  -  total flux cleaned = 0.0402475 Jy
! Component: 150  -  total flux cleaned = 0.0450272 Jy
! Component: 200  -  total flux cleaned = 0.0480081 Jy
! Total flux subtracted in 200 components = 0.0480081 Jy
! Clean residual min=-0.002727 max=0.002692 Jy/beam
! Clean residual mean=0.000000 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.0480081 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0480081 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8155 mas, bmaj=3.781 mas, bpa=-8.202 degrees
! Estimated noise=5.75243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296487 Jy
! Component: 100  -  total flux cleaned = 0.00481298 Jy
! Component: 150  -  total flux cleaned = 0.0060389 Jy
! Component: 200  -  total flux cleaned = 0.00686999 Jy
! Total flux subtracted in 200 components = 0.00686999 Jy
! Clean residual min=-0.002033 max=0.001765 Jy/beam
! Clean residual mean=-0.000000 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.054878 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 30 components and 0.054878 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.773 mas, bmaj=4.086 mas, bpa=-13.48 degrees
! Estimated noise=7.5708 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107003 Jy
! Component: 100  -  total flux cleaned = 0.00169382 Jy
! Component: 150  -  total flux cleaned = 0.00207928 Jy
! Component: 200  -  total flux cleaned = 0.00216862 Jy
! Total flux subtracted in 200 components = 0.00216862 Jy
! Clean residual min=-0.002766 max=0.002646 Jy/beam
! Clean residual mean=0.000000 rms=0.000753 Jy/beam
! Combined flux in latest and established models = 0.0570467 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.5062e-05 Jy
! Component: 100  -  total flux cleaned = 0.000118356 Jy
! Component: 150  -  total flux cleaned = 0.000118578 Jy
! Component: 200  -  total flux cleaned = 0.000125802 Jy
! Total flux subtracted in 200 components = 0.000125802 Jy
! Clean residual min=-0.002717 max=0.002635 Jy/beam
! Clean residual mean=0.000000 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.0571725 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 54 components and 0.0571725 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8155 mas, bmaj=3.781 mas, bpa=-8.202 degrees
! Estimated noise=5.75243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.22307e-05 Jy
! Component: 100  -  total flux cleaned = -0.000112035 Jy
! Component: 150  -  total flux cleaned = -0.000204918 Jy
! Component: 200  -  total flux cleaned = -0.000249798 Jy
! Total flux subtracted in 200 components = -0.000249798 Jy
! Clean residual min=-0.001804 max=0.001763 Jy/beam
! Clean residual mean=0.000000 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.0569227 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 65 components and 0.0569227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.039395Jy  sigma=0.071934
! Fit after  self-cal, rms=0.039396Jy  sigma=0.071926
wmodel /g0/scr/pima/npcsa_uvs/J1725+7708_X_map.mod
! Writing 65 model components to file: /g0/scr/pima/npcsa_uvs/J1725+7708_X_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1725+7708_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1725+7708_X_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1725+7708_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J1725+7708_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.50948e-05 Jy
! Component: 100  -  total flux cleaned = 0.000222871 Jy
! Component: 150  -  total flux cleaned = 0.000443646 Jy
! Component: 200  -  total flux cleaned = 0.000651658 Jy
! Component: 250  -  total flux cleaned = 0.00075028 Jy
! Component: 300  -  total flux cleaned = 0.00072745 Jy
! Component: 350  -  total flux cleaned = 0.000727448 Jy
! Component: 400  -  total flux cleaned = 0.000663143 Jy
! Component: 450  -  total flux cleaned = 0.000622029 Jy
! Component: 500  -  total flux cleaned = 0.000581653 Jy
! Component: 550  -  total flux cleaned = 0.000621091 Jy
! Component: 600  -  total flux cleaned = 0.000679425 Jy
! Component: 650  -  total flux cleaned = 0.00081169 Jy
! Component: 700  -  total flux cleaned = 0.000830092 Jy
! Component: 750  -  total flux cleaned = 0.000902414 Jy
! Component: 800  -  total flux cleaned = 0.000956086 Jy
! Component: 850  -  total flux cleaned = 0.00104317 Jy
! Component: 900  -  total flux cleaned = 0.00111145 Jy
! Component: 950  -  total flux cleaned = 0.0011617 Jy
! Component: 1000  -  total flux cleaned = 0.00117824 Jy
! Component: 1050  -  total flux cleaned = 0.00122687 Jy
! Component: 1100  -  total flux cleaned = 0.00129042 Jy
! Component: 1150  -  total flux cleaned = 0.00130582 Jy
! Component: 1200  -  total flux cleaned = 0.00132147 Jy
! Component: 1250  -  total flux cleaned = 0.00138237 Jy
! Component: 1300  -  total flux cleaned = 0.00138245 Jy
! Component: 1350  -  total flux cleaned = 0.00147099 Jy
! Component: 1400  -  total flux cleaned = 0.00145684 Jy
! Component: 1450  -  total flux cleaned = 0.00158652 Jy
! Component: 1500  -  total flux cleaned = 0.00168559 Jy
! Component: 1550  -  total flux cleaned = 0.00171335 Jy
! Component: 1600  -  total flux cleaned = 0.00174097 Jy
! Component: 1650  -  total flux cleaned = 0.0018232 Jy
! Component: 1700  -  total flux cleaned = 0.00186407 Jy
! Component: 1750  -  total flux cleaned = 0.00193091 Jy
! Component: 1800  -  total flux cleaned = 0.00199699 Jy
! Component: 1850  -  total flux cleaned = 0.00200995 Jy
! Component: 1900  -  total flux cleaned = 0.00207463 Jy
! Component: 1950  -  total flux cleaned = 0.00212598 Jy
! Component: 2000  -  total flux cleaned = 0.00221515 Jy
! Component: 2050  -  total flux cleaned = 0.00227802 Jy
! Component: 2100  -  total flux cleaned = 0.00235279 Jy
! Component: 2150  -  total flux cleaned = 0.00240227 Jy
! Component: 2200  -  total flux cleaned = 0.00248807 Jy
! Component: 2250  -  total flux cleaned = 0.00256089 Jy
! Component: 2300  -  total flux cleaned = 0.00263291 Jy
! Component: 2350  -  total flux cleaned = 0.00269253 Jy
! Component: 2400  -  total flux cleaned = 0.00275186 Jy
! Component: 2450  -  total flux cleaned = 0.00283391 Jy
! Component: 2500  -  total flux cleaned = 0.00285701 Jy
! Component: 2550  -  total flux cleaned = 0.00288009 Jy
! Component: 2600  -  total flux cleaned = 0.00292587 Jy
! Component: 2650  -  total flux cleaned = 0.00294868 Jy
! Component: 2700  -  total flux cleaned = 0.00300517 Jy
! Component: 2750  -  total flux cleaned = 0.00306112 Jy
! Component: 2800  -  total flux cleaned = 0.00308326 Jy
! Component: 2850  -  total flux cleaned = 0.00308326 Jy
! Component: 2900  -  total flux cleaned = 0.00316009 Jy
! Component: 2950  -  total flux cleaned = 0.00312727 Jy
! Component: 3000  -  total flux cleaned = 0.00315973 Jy
! Component: 3050  -  total flux cleaned = 0.00323489 Jy
! Component: 3100  -  total flux cleaned = 0.00327746 Jy
! Component: 3150  -  total flux cleaned = 0.00326677 Jy
! Component: 3200  -  total flux cleaned = 0.003351 Jy
! Component: 3250  -  total flux cleaned = 0.00337193 Jy
! Component: 3300  -  total flux cleaned = 0.00341364 Jy
! Component: 3350  -  total flux cleaned = 0.00343429 Jy
! Component: 3400  -  total flux cleaned = 0.00347537 Jy
! Component: 3450  -  total flux cleaned = 0.00349579 Jy
! Component: 3500  -  total flux cleaned = 0.00350593 Jy
! Component: 3550  -  total flux cleaned = 0.00353621 Jy
! Component: 3600  -  total flux cleaned = 0.00357624 Jy
! Component: 3650  -  total flux cleaned = 0.00360612 Jy
! Component: 3700  -  total flux cleaned = 0.00361602 Jy
! Component: 3750  -  total flux cleaned = 0.00363574 Jy
! Component: 3800  -  total flux cleaned = 0.00367489 Jy
! Component: 3850  -  total flux cleaned = 0.00371376 Jy
! Component: 3900  -  total flux cleaned = 0.00371376 Jy
! Component: 3950  -  total flux cleaned = 0.0037522 Jy
! Component: 4000  -  total flux cleaned = 0.00374265 Jy
! Component: 4050  -  total flux cleaned = 0.00379029 Jy
! Total flux subtracted in 4096 components = 0.00383757 Jy
! Clean residual min=-0.000612 max=0.000603 Jy/beam
! Clean residual mean=0.000000 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.0607603 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 347 components and 0.0607602 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1725+7708_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8155 x 3.781 at -8.202 degrees (North through East)
! Clean map  min=-0.0011648  max=0.042436 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1725+7708_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0424362 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000160323 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.13339 1.13339 2.26678 4.53356 9.06712 18.1342 36.2685 72.537
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.042 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1725+7708_X_uvs.log closed on Sun Oct  6 10:29:45 2013