! Started logfile: /g0/scr/pima/npcsa_uvs/J1658+4737_X_uvs.log on Sun Oct  6 10:29:36 2013
obs /g0/scr/pima/npcsa_uvs/J1658+4737_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1658+4737_X_uva.fits
! AN table 1: 15 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.868519 visibilities/baseline/integration-bin.
! Found source: J1658+4737
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1876 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1658+4737_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 11 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.165567Jy  sigma=5.539339
! Fit after  self-cal, rms=0.583207Jy  sigma=1.567223
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8886 mas, bmaj=2.35 mas, bpa=-34.4 degrees
! Estimated noise=7.8122 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.455306 Jy
! Component: 100  -  total flux cleaned = 0.643067 Jy
! Total flux subtracted in 100 components = 0.643067 Jy
! Clean residual min=-0.050833 max=0.089050 Jy/beam
! Clean residual mean=-0.000048 rms=0.017228 Jy/beam
! Combined flux in latest and established models = 0.643067 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.643067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.178956Jy  sigma=1.016211
! Fit after  self-cal, rms=0.175310Jy  sigma=1.010858
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.131 mas, bmaj=2.531 mas, bpa=-33.74 degrees
! Estimated noise=4.16798 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130994 Jy
! Component: 100  -  total flux cleaned = 0.195011 Jy
! Component: 150  -  total flux cleaned = 0.232148 Jy
! Component: 200  -  total flux cleaned = 0.255483 Jy
! Total flux subtracted in 200 components = 0.255483 Jy
! Clean residual min=-0.016072 max=0.017673 Jy/beam
! Clean residual mean=-0.000017 rms=0.005240 Jy/beam
! Combined flux in latest and established models = 0.89855 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 46 components and 0.89855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101304Jy  sigma=0.418671
! Fit after  self-cal, rms=0.100197Jy  sigma=0.416527
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.09     KP        1.00     
!   LA        1.02     MK        0.99     NL        1.00     OV        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.02     KP        0.95     
!   LA        0.95     MK        0.95     NL        0.98     OV        0.95     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.00     HN        1.03     KP        0.87     
!   LA        0.99     MK        0.97     NL        0.99     OV        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.03     HN        0.97     KP        0.91     
!   LA        0.97     MK        1.00     NL        1.02     OV        0.99     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.100197Jy  sigma=0.416527
! Fit after  self-cal, rms=0.094348Jy  sigma=0.357441
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.133 mas, bmaj=2.562 mas, bpa=-33.85 degrees
! Estimated noise=4.08299 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00405006 Jy
! Component: 100  -  total flux cleaned = -0.00404256 Jy
! Component: 150  -  total flux cleaned = -0.00404381 Jy
! Component: 200  -  total flux cleaned = -0.00378574 Jy
! Total flux subtracted in 200 components = -0.00378574 Jy
! Clean residual min=-0.008029 max=0.011287 Jy/beam
! Clean residual mean=-0.000007 rms=0.002287 Jy/beam
! Combined flux in latest and established models = 0.894764 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 55 components and 0.894764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092587Jy  sigma=0.356138
! Fit after  self-cal, rms=0.092564Jy  sigma=0.355914
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092564Jy  sigma=0.355914
! Fit after  self-cal, rms=0.092171Jy  sigma=0.355358
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.128 mas, bmaj=2.56 mas, bpa=-33.9 degrees
! Estimated noise=4.0503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00457942 Jy
! Component: 100  -  total flux cleaned = -0.00496974 Jy
! Component: 150  -  total flux cleaned = -0.00486408 Jy
! Component: 200  -  total flux cleaned = -0.00467389 Jy
! Total flux subtracted in 200 components = -0.00467389 Jy
! Clean residual min=-0.007548 max=0.010808 Jy/beam
! Clean residual mean=-0.000006 rms=0.002213 Jy/beam
! Combined flux in latest and established models = 0.89009 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 57 components and 0.89009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090993Jy  sigma=0.355396
! Fit after  self-cal, rms=0.090979Jy  sigma=0.355314
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20, 11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00915624 Jy
! Component: 100  -  total flux cleaned = 0.0139923 Jy
! Component: 150  -  total flux cleaned = 0.0167119 Jy
! Component: 200  -  total flux cleaned = 0.0192217 Jy
! Total flux subtracted in 200 components = 0.0192217 Jy
! Clean residual min=-0.006289 max=0.007008 Jy/beam
! Clean residual mean=-0.000002 rms=0.001419 Jy/beam
! Combined flux in latest and established models = 0.909312 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 84 components and 0.909312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090025Jy  sigma=0.348776
! Fit after  self-cal, rms=0.089984Jy  sigma=0.348684
! Inverting map 
! Added new window around map position (-25.8, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00419634 Jy
! Component: 100  -  total flux cleaned = 0.0054101 Jy
! Component: 150  -  total flux cleaned = 0.00578633 Jy
! Component: 200  -  total flux cleaned = 0.00654517 Jy
! Total flux subtracted in 200 components = 0.00654517 Jy
! Clean residual min=-0.004959 max=0.004839 Jy/beam
! Clean residual mean=-0.000000 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 0.915857 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 98 components and 0.915857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089379Jy  sigma=0.345962
! Fit after  self-cal, rms=0.089378Jy  sigma=0.345881
! Inverting map 
! Added new window around map position (51, -49.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314664 Jy
! Component: 100  -  total flux cleaned = 0.00385921 Jy
! Component: 150  -  total flux cleaned = 0.00448737 Jy
! Component: 200  -  total flux cleaned = 0.00481744 Jy
! Total flux subtracted in 200 components = 0.00481744 Jy
! Clean residual min=-0.004456 max=0.003986 Jy/beam
! Clean residual mean=0.000001 rms=0.000955 Jy/beam
! Combined flux in latest and established models = 0.920674 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 112 components and 0.920674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088927Jy  sigma=0.344825
! Fit after  self-cal, rms=0.088938Jy  sigma=0.344762
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088938Jy  sigma=0.344762
! Fit after  self-cal, rms=0.088549Jy  sigma=0.343961
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.124 mas, bmaj=2.56 mas, bpa=-33.95 degrees
! Estimated noise=4.01904 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0020969 Jy
! Component: 100  -  total flux cleaned = -0.00133843 Jy
! Component: 150  -  total flux cleaned = -0.00125071 Jy
! Component: 200  -  total flux cleaned = -0.00132156 Jy
! Total flux subtracted in 200 components = -0.00132156 Jy
! Clean residual min=-0.004024 max=0.003756 Jy/beam
! Clean residual mean=0.000001 rms=0.000882 Jy/beam
! Combined flux in latest and established models = 0.919353 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 127 components and 0.919353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087929Jy  sigma=0.343933
! Fit after  self-cal, rms=0.087936Jy  sigma=0.343920
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.57973e-06 Jy
! Component: 100  -  total flux cleaned = -0.000199054 Jy
! Component: 150  -  total flux cleaned = -0.000330336 Jy
! Component: 200  -  total flux cleaned = -0.000516423 Jy
! Total flux subtracted in 200 components = -0.000516423 Jy
! Clean residual min=-0.003830 max=0.003636 Jy/beam
! Clean residual mean=0.000001 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.918837 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 135 components and 0.918837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087772Jy  sigma=0.343642
! Fit after  self-cal, rms=0.087778Jy  sigma=0.343634
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087778Jy  sigma=0.343634
! Fit after  self-cal, rms=0.087551Jy  sigma=0.343158
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.189 mas, bmaj=2.93 mas, bpa=-27.01 degrees
! Estimated noise=3.81187 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00287871 Jy
! Component: 100  -  total flux cleaned = -0.0037787 Jy
! Component: 150  -  total flux cleaned = -0.00416218 Jy
! Component: 200  -  total flux cleaned = -0.00454629 Jy
! Total flux subtracted in 200 components = -0.00454629 Jy
! Clean residual min=-0.003299 max=0.003425 Jy/beam
! Clean residual mean=0.000001 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.91429 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 150 components and 0.91429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087289Jy  sigma=0.343282
! Fit after  self-cal, rms=0.087270Jy  sigma=0.343267
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (35.6, -18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014231 Jy
! Component: 100  -  total flux cleaned = 0.00145653 Jy
! Component: 150  -  total flux cleaned = 0.0019857 Jy
! Component: 200  -  total flux cleaned = 0.00246227 Jy
! Total flux subtracted in 200 components = 0.00246227 Jy
! Clean residual min=-0.002531 max=0.002088 Jy/beam
! Clean residual mean=0.000001 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.916753 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 177 components and 0.916753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087141Jy  sigma=0.342834
! Fit after  self-cal, rms=0.087143Jy  sigma=0.342812
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.122 mas, bmaj=2.559 mas, bpa=-33.97 degrees
! Estimated noise=3.99459 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.122 x 2.559 at -33.97 degrees (North through East)
! Clean map  min=-0.0040048  max=0.58294 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087143Jy  sigma=0.342812
! Fit after  self-cal, rms=0.083373Jy  sigma=0.296533
! Inverting map and beam 
! Estimated beam: bmin=1.122 mas, bmaj=2.558 mas, bpa=-33.97 degrees
! Estimated noise=3.98399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00221383 Jy
! Component: 100  -  total flux cleaned = -0.00255585 Jy
! Component: 150  -  total flux cleaned = -0.00270829 Jy
! Component: 200  -  total flux cleaned = -0.00264686 Jy
! Total flux subtracted in 200 components = -0.00264686 Jy
! Clean residual min=-0.002737 max=0.002868 Jy/beam
! Clean residual mean=0.000001 rms=0.000704 Jy/beam
! Combined flux in latest and established models = 0.914106 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 196 components and 0.914106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083000Jy  sigma=0.296334
! Fit after  self-cal, rms=0.083004Jy  sigma=0.296321
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000251179 Jy
! Component: 100  -  total flux cleaned = -0.000252402 Jy
! Component: 150  -  total flux cleaned = -0.00030893 Jy
! Component: 200  -  total flux cleaned = -0.000200661 Jy
! Total flux subtracted in 200 components = -0.000200661 Jy
! Clean residual min=-0.002670 max=0.002717 Jy/beam
! Clean residual mean=0.000001 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 0.913905 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 210 components and 0.913905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082856Jy  sigma=0.296143
! Fit after  self-cal, rms=0.082854Jy  sigma=0.296136
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082854Jy  sigma=0.296136
! Fit after  self-cal, rms=0.082695Jy  sigma=0.295872
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8784 mas, bmaj=2.368 mas, bpa=-34.69 degrees
! Estimated noise=7.49017 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.438068 Jy
! Component: 100  -  total flux cleaned = 0.62022 Jy
! Component: 150  -  total flux cleaned = 0.71803 Jy
! Component: 200  -  total flux cleaned = 0.773528 Jy
! Total flux subtracted in 200 components = 0.773528 Jy
! Clean residual min=-0.022972 max=0.028035 Jy/beam
! Clean residual mean=-0.000017 rms=0.006295 Jy/beam
! Combined flux in latest and established models = 0.773528 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.773528 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.122 mas, bmaj=2.557 mas, bpa=-33.97 degrees
! Estimated noise=3.96811 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0435362 Jy
! Component: 100  -  total flux cleaned = 0.0679952 Jy
! Component: 150  -  total flux cleaned = 0.0832854 Jy
! Component: 200  -  total flux cleaned = 0.0946355 Jy
! Total flux subtracted in 200 components = 0.0946355 Jy
! Clean residual min=-0.008890 max=0.009483 Jy/beam
! Clean residual mean=-0.000004 rms=0.002511 Jy/beam
! Combined flux in latest and established models = 0.868163 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 45 components and 0.868163 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.188 mas, bmaj=2.929 mas, bpa=-26.95 degrees
! Estimated noise=3.78744 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105351 Jy
! Component: 100  -  total flux cleaned = 0.0149066 Jy
! Component: 150  -  total flux cleaned = 0.0190386 Jy
! Component: 200  -  total flux cleaned = 0.0217394 Jy
! Total flux subtracted in 200 components = 0.0217394 Jy
! Clean residual min=-0.005429 max=0.004493 Jy/beam
! Clean residual mean=-0.000002 rms=0.001570 Jy/beam
! Combined flux in latest and established models = 0.889903 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274296 Jy
! Component: 100  -  total flux cleaned = 0.00521799 Jy
! Component: 150  -  total flux cleaned = 0.00685454 Jy
! Component: 200  -  total flux cleaned = 0.00880523 Jy
! Total flux subtracted in 200 components = 0.00880523 Jy
! Clean residual min=-0.003643 max=0.002902 Jy/beam
! Clean residual mean=0.000000 rms=0.000964 Jy/beam
! Combined flux in latest and established models = 0.898708 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 110 components and 0.898708 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.122 mas, bmaj=2.557 mas, bpa=-33.97 degrees
! Estimated noise=3.96811 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000844144 Jy
! Component: 100  -  total flux cleaned = 0.00245924 Jy
! Component: 150  -  total flux cleaned = 0.00374562 Jy
! Component: 200  -  total flux cleaned = 0.00492734 Jy
! Total flux subtracted in 200 components = 0.00492734 Jy
! Clean residual min=-0.004491 max=0.003465 Jy/beam
! Clean residual mean=0.000001 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.903635 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 141 components and 0.903635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083621Jy  sigma=0.298641
! Fit after  self-cal, rms=0.083386Jy  sigma=0.298306
wmodel /g0/scr/pima/npcsa_uvs/J1658+4737_X_map.mod
! Writing 141 model components to file: /g0/scr/pima/npcsa_uvs/J1658+4737_X_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1658+4737_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1658+4737_X_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1658+4737_X_map.win
! wwins: Wrote 5 windows to /g0/scr/pima/npcsa_uvs/J1658+4737_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000324935 Jy
! Component: 100  -  total flux cleaned = -1.81303e-05 Jy
! Component: 150  -  total flux cleaned = 0.000212213 Jy
! Component: 200  -  total flux cleaned = 0.000319663 Jy
! Component: 250  -  total flux cleaned = 0.000634576 Jy
! Component: 300  -  total flux cleaned = 0.000839139 Jy
! Component: 350  -  total flux cleaned = 0.000790023 Jy
! Component: 400  -  total flux cleaned = 0.000694331 Jy
! Component: 450  -  total flux cleaned = 0.000599255 Jy
! Component: 500  -  total flux cleaned = 0.000553752 Jy
! Component: 550  -  total flux cleaned = 0.000553702 Jy
! Component: 600  -  total flux cleaned = 0.000688014 Jy
! Component: 650  -  total flux cleaned = 0.00077519 Jy
! Component: 700  -  total flux cleaned = 0.000817969 Jy
! Component: 750  -  total flux cleaned = 0.000945471 Jy
! Component: 800  -  total flux cleaned = 0.00115257 Jy
! Component: 850  -  total flux cleaned = 0.00115237 Jy
! Component: 900  -  total flux cleaned = 0.00115184 Jy
! Component: 950  -  total flux cleaned = 0.0011912 Jy
! Component: 1000  -  total flux cleaned = 0.00122996 Jy
! Component: 1050  -  total flux cleaned = 0.0011915 Jy
! Component: 1100  -  total flux cleaned = 0.00122918 Jy
! Component: 1150  -  total flux cleaned = 0.00122907 Jy
! Component: 1200  -  total flux cleaned = 0.00130327 Jy
! Component: 1250  -  total flux cleaned = 0.00126645 Jy
! Component: 1300  -  total flux cleaned = 0.0013026 Jy
! Component: 1350  -  total flux cleaned = 0.00126669 Jy
! Component: 1400  -  total flux cleaned = 0.00119684 Jy
! Component: 1450  -  total flux cleaned = 0.00123186 Jy
! Component: 1500  -  total flux cleaned = 0.00126614 Jy
! Component: 1550  -  total flux cleaned = 0.00136761 Jy
! Component: 1600  -  total flux cleaned = 0.00140092 Jy
! Component: 1650  -  total flux cleaned = 0.00156566 Jy
! Component: 1700  -  total flux cleaned = 0.00166348 Jy
! Component: 1750  -  total flux cleaned = 0.00163112 Jy
! Component: 1800  -  total flux cleaned = 0.00172738 Jy
! Component: 1850  -  total flux cleaned = 0.00191761 Jy
! Component: 1900  -  total flux cleaned = 0.00207451 Jy
! Component: 1950  -  total flux cleaned = 0.00222966 Jy
! Component: 2000  -  total flux cleaned = 0.00232193 Jy
! Component: 2050  -  total flux cleaned = 0.00247507 Jy
! Component: 2100  -  total flux cleaned = 0.00265699 Jy
! Component: 2150  -  total flux cleaned = 0.00277706 Jy
! Component: 2200  -  total flux cleaned = 0.00295582 Jy
! Component: 2250  -  total flux cleaned = 0.00307347 Jy
! Component: 2300  -  total flux cleaned = 0.00313221 Jy
! Component: 2350  -  total flux cleaned = 0.00327742 Jy
! Component: 2400  -  total flux cleaned = 0.00336364 Jy
! Component: 2450  -  total flux cleaned = 0.00350655 Jy
! Component: 2500  -  total flux cleaned = 0.00350642 Jy
! Component: 2550  -  total flux cleaned = 0.00364727 Jy
! Component: 2600  -  total flux cleaned = 0.00373131 Jy
! Component: 2650  -  total flux cleaned = 0.00378701 Jy
! Component: 2700  -  total flux cleaned = 0.00400722 Jy
! Component: 2750  -  total flux cleaned = 0.00414371 Jy
! Component: 2800  -  total flux cleaned = 0.00422484 Jy
! Component: 2850  -  total flux cleaned = 0.00427848 Jy
! Component: 2900  -  total flux cleaned = 0.00430512 Jy
! Component: 2950  -  total flux cleaned = 0.00441153 Jy
! Component: 3000  -  total flux cleaned = 0.00451702 Jy
! Component: 3050  -  total flux cleaned = 0.00467416 Jy
! Component: 3100  -  total flux cleaned = 0.00467386 Jy
! Component: 3150  -  total flux cleaned = 0.00475166 Jy
! Component: 3200  -  total flux cleaned = 0.0048803 Jy
! Component: 3250  -  total flux cleaned = 0.00485467 Jy
! Component: 3300  -  total flux cleaned = 0.00498213 Jy
! Component: 3350  -  total flux cleaned = 0.00498215 Jy
! Component: 3400  -  total flux cleaned = 0.00503246 Jy
! Component: 3450  -  total flux cleaned = 0.00503245 Jy
! Component: 3500  -  total flux cleaned = 0.00505729 Jy
! Component: 3550  -  total flux cleaned = 0.00495832 Jy
! Component: 3600  -  total flux cleaned = 0.0050076 Jy
! Component: 3650  -  total flux cleaned = 0.00495842 Jy
! Component: 3700  -  total flux cleaned = 0.00490959 Jy
! Component: 3750  -  total flux cleaned = 0.00490962 Jy
! Component: 3800  -  total flux cleaned = 0.00488546 Jy
! Component: 3850  -  total flux cleaned = 0.00486144 Jy
! Component: 3900  -  total flux cleaned = 0.00493345 Jy
! Component: 3950  -  total flux cleaned = 0.00486177 Jy
! Component: 4000  -  total flux cleaned = 0.00490946 Jy
! Component: 4050  -  total flux cleaned = 0.00488566 Jy
! Total flux subtracted in 4096 components = 0.00483855 Jy
! Clean residual min=-0.001318 max=0.001289 Jy/beam
! Clean residual mean=-0.000001 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.908473 Jy
keep
! Adding 215 model components to the UV plane model.
! The established model now contains 356 components and 0.908473 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1658+4737_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.122 x 2.557 at -33.97 degrees (North through East)
! Clean map  min=-0.0031108  max=0.57855 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1658+4737_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.578545 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000400959 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.207914 0.207914 0.415828 0.831656 1.66331 3.32662 6.65325 13.3065 26.613 53.226
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.578 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1658+4737_X_uvs.log closed on Sun Oct  6 10:29:40 2013