! Started logfile: /g0/scr/pima/npcsa_uvs/J1639+8631_S_uvs.log on Sun Oct  6 10:34:45 2013
obs /g0/scr/pima/npcsa_uvs/J1639+8631_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1639+8631_S_uva.fits
! AN table 1: 55 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.855556 visibilities/baseline/integration-bin.
! Found source: J1639+8631
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6776 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1639+8631_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 22 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011956Jy  sigma=1.187165
! Fit after  self-cal, rms=0.904107Jy  sigma=0.941137
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.302 mas, bmaj=10.47 mas, bpa=13.39 degrees
! Estimated noise=19.0161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100665 Jy
! Component: 100  -  total flux cleaned = 0.133906 Jy
! Total flux subtracted in 100 components = 0.133906 Jy
! Clean residual min=-0.023441 max=0.030706 Jy/beam
! Clean residual mean=0.000046 rms=0.007198 Jy/beam
! Combined flux in latest and established models = 0.133906 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.133906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138285Jy  sigma=0.207707
! Fit after  self-cal, rms=0.136685Jy  sigma=0.206565
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.148 mas, bmaj=10.62 mas, bpa=12.14 degrees
! Estimated noise=8.553 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0433474 Jy
! Component: 100  -  total flux cleaned = 0.0650097 Jy
! Component: 150  -  total flux cleaned = 0.0781038 Jy
! Component: 200  -  total flux cleaned = 0.0864575 Jy
! Total flux subtracted in 200 components = 0.0864575 Jy
! Clean residual min=-0.032268 max=0.041349 Jy/beam
! Clean residual mean=0.000023 rms=0.011119 Jy/beam
! Combined flux in latest and established models = 0.220363 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 44 components and 0.220363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136398Jy  sigma=0.177470
! Fit after  self-cal, rms=0.136118Jy  sigma=0.177129
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        0.88     HN        0.94     KP        0.87     
!   LA        1.24     MK        0.85     NL        1.48     OV        0.79     
!   SC        0.83     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        0.93     HN        1.04     KP        0.90     
!   LA        1.06     MK        0.89     NL        1.20     OV        0.83     
!   SC        0.73     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.03     HN        0.98     KP        0.83     
!   LA        0.90     MK        1.02     NL        1.40     OV        0.88     
!   SC        0.79     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        1.02     HN        0.92     KP        0.85     
!   LA        0.78     MK        0.95     NL        1.40     OV        0.72     
!   SC        0.81     
! 
! 
! Fit before self-cal, rms=0.136118Jy  sigma=0.177129
! Fit after  self-cal, rms=0.124680Jy  sigma=0.159836
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.137 mas, bmaj=10.54 mas, bpa=12.22 degrees
! Estimated noise=7.15682 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00997855 Jy
! Component: 100  -  total flux cleaned = -0.00965734 Jy
! Component: 150  -  total flux cleaned = -0.00890162 Jy
! Component: 200  -  total flux cleaned = -0.00836757 Jy
! Total flux subtracted in 200 components = -0.00836757 Jy
! Clean residual min=-0.021921 max=0.029518 Jy/beam
! Clean residual mean=0.000002 rms=0.007880 Jy/beam
! Combined flux in latest and established models = 0.211996 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 50 components and 0.211996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118194Jy  sigma=0.160986
! Fit after  self-cal, rms=0.118748Jy  sigma=0.160300
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118748Jy  sigma=0.160300
! Fit after  self-cal, rms=0.110673Jy  sigma=0.156700
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.061 mas, bmaj=10.53 mas, bpa=12.36 degrees
! Estimated noise=6.20443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0140139 Jy
! Component: 100  -  total flux cleaned = -0.0145795 Jy
! Component: 150  -  total flux cleaned = -0.0140969 Jy
! Component: 200  -  total flux cleaned = -0.013873 Jy
! Total flux subtracted in 200 components = -0.013873 Jy
! Clean residual min=-0.018191 max=0.025066 Jy/beam
! Clean residual mean=0.000001 rms=0.006598 Jy/beam
! Combined flux in latest and established models = 0.198123 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 56 components and 0.198123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105628Jy  sigma=0.158873
! Fit after  self-cal, rms=0.105626Jy  sigma=0.158744
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000298725 Jy
! Component: 100  -  total flux cleaned = -0.000390899 Jy
! Component: 150  -  total flux cleaned = -0.000311093 Jy
! Component: 200  -  total flux cleaned = -0.000241265 Jy
! Total flux subtracted in 200 components = -0.000241265 Jy
! Clean residual min=-0.018267 max=0.025354 Jy/beam
! Clean residual mean=0.000002 rms=0.006590 Jy/beam
! Combined flux in latest and established models = 0.197882 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.197882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105325Jy  sigma=0.158877
! Fit after  self-cal, rms=0.105275Jy  sigma=0.158798
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105275Jy  sigma=0.158798
! Fit after  self-cal, rms=0.097196Jy  sigma=0.155139
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.005 mas, bmaj=10.53 mas, bpa=12.45 degrees
! Estimated noise=5.35767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0119754 Jy
! Component: 100  -  total flux cleaned = -0.0160135 Jy
! Component: 150  -  total flux cleaned = -0.0162285 Jy
! Component: 200  -  total flux cleaned = -0.0159712 Jy
! Total flux subtracted in 200 components = -0.0159712 Jy
! Clean residual min=-0.015582 max=0.021985 Jy/beam
! Clean residual mean=0.000000 rms=0.005602 Jy/beam
! Combined flux in latest and established models = 0.18191 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 70 components and 0.18191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093063Jy  sigma=0.157747
! Fit after  self-cal, rms=0.093068Jy  sigma=0.157669
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000525736 Jy
! Component: 100  -  total flux cleaned = -0.000529281 Jy
! Component: 150  -  total flux cleaned = -0.000380577 Jy
! Component: 200  -  total flux cleaned = -0.000336261 Jy
! Total flux subtracted in 200 components = -0.000336261 Jy
! Clean residual min=-0.015651 max=0.022096 Jy/beam
! Clean residual mean=0.000001 rms=0.005605 Jy/beam
! Combined flux in latest and established models = 0.181574 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 75 components and 0.181574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092903Jy  sigma=0.157775
! Fit after  self-cal, rms=0.092890Jy  sigma=0.157733
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092890Jy  sigma=0.157733
! Fit after  self-cal, rms=0.085791Jy  sigma=0.154367
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.52 mas, bmaj=11.64 mas, bpa=21.34 degrees
! Estimated noise=5.09647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0114819 Jy
! Component: 100  -  total flux cleaned = -0.0119343 Jy
! Component: 150  -  total flux cleaned = -0.0125365 Jy
! Component: 200  -  total flux cleaned = -0.0129498 Jy
! Total flux subtracted in 200 components = -0.0129498 Jy
! Clean residual min=-0.023988 max=0.028882 Jy/beam
! Clean residual mean=-0.000009 rms=0.009300 Jy/beam
! Combined flux in latest and established models = 0.168624 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 88 components and 0.168624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082233Jy  sigma=0.157708
! Fit after  self-cal, rms=0.082175Jy  sigma=0.157549
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00020059 Jy
! Component: 100  -  total flux cleaned = -0.000368908 Jy
! Component: 150  -  total flux cleaned = -0.00053094 Jy
! Component: 200  -  total flux cleaned = -0.000680885 Jy
! Total flux subtracted in 200 components = -0.000680885 Jy
! Clean residual min=-0.023980 max=0.028565 Jy/beam
! Clean residual mean=-0.000008 rms=0.009270 Jy/beam
! Combined flux in latest and established models = 0.167944 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 98 components and 0.167944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082277Jy  sigma=0.157898
! Fit after  self-cal, rms=0.082275Jy  sigma=0.157839
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=10.53 mas, bpa=12.56 degrees
! Estimated noise=4.64155 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.956 x 10.53 at 12.56 degrees (North through East)
! Clean map  min=-0.012854  max=0.081143 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.138 mas, bmaj=10.63 mas, bpa=13.61 degrees
! Estimated noise=9.96597 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0524116 Jy
! Component: 100  -  total flux cleaned = 0.0758032 Jy
! Component: 150  -  total flux cleaned = 0.092826 Jy
! Component: 200  -  total flux cleaned = 0.105676 Jy
! Total flux subtracted in 200 components = 0.105676 Jy
! Clean residual min=-0.011025 max=0.015447 Jy/beam
! Clean residual mean=0.000023 rms=0.003467 Jy/beam
! Combined flux in latest and established models = 0.105676 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 37 model components to the UV plane model.
! The established model now contains 37 components and 0.105676 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=10.53 mas, bpa=12.56 degrees
! Estimated noise=4.64155 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189853 Jy
! Component: 100  -  total flux cleaned = 0.0305755 Jy
! Component: 150  -  total flux cleaned = 0.0385504 Jy
! Component: 200  -  total flux cleaned = 0.0443056 Jy
! Total flux subtracted in 200 components = 0.0443056 Jy
! Clean residual min=-0.014878 max=0.019062 Jy/beam
! Clean residual mean=0.000012 rms=0.005005 Jy/beam
! Combined flux in latest and established models = 0.149981 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 77 components and 0.149981 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.52 mas, bmaj=11.64 mas, bpa=21.34 degrees
! Estimated noise=5.09647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00818289 Jy
! Component: 100  -  total flux cleaned = 0.0120922 Jy
! Component: 150  -  total flux cleaned = 0.0134788 Jy
! Component: 200  -  total flux cleaned = 0.0137854 Jy
! Total flux subtracted in 200 components = 0.0137854 Jy
! Clean residual min=-0.024415 max=0.028381 Jy/beam
! Clean residual mean=-0.000003 rms=0.009322 Jy/beam
! Combined flux in latest and established models = 0.163767 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000264981 Jy
! Component: 100  -  total flux cleaned = 0.000510876 Jy
! Component: 150  -  total flux cleaned = 0.000731828 Jy
! Component: 200  -  total flux cleaned = 0.000829157 Jy
! Total flux subtracted in 200 components = 0.000829157 Jy
! Clean residual min=-0.024258 max=0.028418 Jy/beam
! Clean residual mean=-0.000004 rms=0.009289 Jy/beam
! Combined flux in latest and established models = 0.164596 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 88 components and 0.164596 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.956 mas, bmaj=10.53 mas, bpa=12.56 degrees
! Estimated noise=4.64155 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00323397 Jy
! Component: 100  -  total flux cleaned = -0.00311713 Jy
! Component: 150  -  total flux cleaned = -0.00303108 Jy
! Component: 200  -  total flux cleaned = -0.00281486 Jy
! Total flux subtracted in 200 components = -0.00281486 Jy
! Clean residual min=-0.014022 max=0.019727 Jy/beam
! Clean residual mean=0.000001 rms=0.004816 Jy/beam
! Combined flux in latest and established models = 0.161781 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 106 components and 0.161781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082027Jy  sigma=0.158217
! Fit after  self-cal, rms=0.082103Jy  sigma=0.157983
wmodel /g0/scr/pima/npcsa_uvs/J1639+8631_S_map.mod
! Writing 106 model components to file: /g0/scr/pima/npcsa_uvs/J1639+8631_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1639+8631_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1639+8631_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1639+8631_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J1639+8631_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00798266 Jy
! Component: 100  -  total flux cleaned = 0.0113467 Jy
! Component: 150  -  total flux cleaned = 0.0115735 Jy
! Component: 200  -  total flux cleaned = 0.0117806 Jy
! Component: 250  -  total flux cleaned = 0.0115869 Jy
! Component: 300  -  total flux cleaned = 0.011409 Jy
! Component: 350  -  total flux cleaned = 0.0110731 Jy
! Component: 400  -  total flux cleaned = 0.0110732 Jy
! Component: 450  -  total flux cleaned = 0.0107634 Jy
! Component: 500  -  total flux cleaned = 0.0103296 Jy
! Component: 550  -  total flux cleaned = 0.0100557 Jy
! Component: 600  -  total flux cleaned = 0.00992954 Jy
! Component: 650  -  total flux cleaned = 0.00993363 Jy
! Component: 700  -  total flux cleaned = 0.00969537 Jy
! Component: 750  -  total flux cleaned = 0.00958123 Jy
! Component: 800  -  total flux cleaned = 0.00935989 Jy
! Component: 850  -  total flux cleaned = 0.00925344 Jy
! Component: 900  -  total flux cleaned = 0.00955316 Jy
! Component: 950  -  total flux cleaned = 0.0100398 Jy
! Component: 1000  -  total flux cleaned = 0.0107936 Jy
! Component: 1050  -  total flux cleaned = 0.0116136 Jy
! Component: 1100  -  total flux cleaned = 0.0122316 Jy
! Component: 1150  -  total flux cleaned = 0.0131708 Jy
! Component: 1200  -  total flux cleaned = 0.0137481 Jy
! Component: 1250  -  total flux cleaned = 0.0145513 Jy
! Component: 1300  -  total flux cleaned = 0.0154811 Jy
! Component: 1350  -  total flux cleaned = 0.0160841 Jy
! Component: 1400  -  total flux cleaned = 0.0168859 Jy
! Component: 1450  -  total flux cleaned = 0.0178775 Jy
! Component: 1500  -  total flux cleaned = 0.0187717 Jy
! Component: 1550  -  total flux cleaned = 0.0194435 Jy
! Component: 1600  -  total flux cleaned = 0.0202964 Jy
! Component: 1650  -  total flux cleaned = 0.021126 Jy
! Component: 1700  -  total flux cleaned = 0.0218737 Jy
! Component: 1750  -  total flux cleaned = 0.0226646 Jy
! Component: 1800  -  total flux cleaned = 0.0234342 Jy
! Component: 1850  -  total flux cleaned = 0.0241861 Jy
! Component: 1900  -  total flux cleaned = 0.0248633 Jy
! Component: 1950  -  total flux cleaned = 0.0254714 Jy
! Component: 2000  -  total flux cleaned = 0.0261188 Jy
! Component: 2050  -  total flux cleaned = 0.0268038 Jy
! Component: 2100  -  total flux cleaned = 0.0274212 Jy
! Component: 2150  -  total flux cleaned = 0.027925 Jy
! Component: 2200  -  total flux cleaned = 0.0283189 Jy
! Component: 2250  -  total flux cleaned = 0.0288499 Jy
! Component: 2300  -  total flux cleaned = 0.0291339 Jy
! Component: 2350  -  total flux cleaned = 0.0295962 Jy
! Component: 2400  -  total flux cleaned = 0.0300489 Jy
! Component: 2450  -  total flux cleaned = 0.0304478 Jy
! Component: 2500  -  total flux cleaned = 0.0308401 Jy
! Component: 2550  -  total flux cleaned = 0.0310544 Jy
! Component: 2600  -  total flux cleaned = 0.0314326 Jy
! Component: 2650  -  total flux cleaned = 0.0317623 Jy
! Component: 2700  -  total flux cleaned = 0.0319653 Jy
! Component: 2750  -  total flux cleaned = 0.0323239 Jy
! Component: 2800  -  total flux cleaned = 0.0325197 Jy
! Component: 2850  -  total flux cleaned = 0.0327126 Jy
! Component: 2900  -  total flux cleaned = 0.0330164 Jy
! Component: 2950  -  total flux cleaned = 0.0331288 Jy
! Component: 3000  -  total flux cleaned = 0.0333135 Jy
! Component: 3050  -  total flux cleaned = 0.0335318 Jy
! Component: 3100  -  total flux cleaned = 0.0336034 Jy
! Component: 3150  -  total flux cleaned = 0.03378 Jy
! Component: 3200  -  total flux cleaned = 0.0339883 Jy
! Component: 3250  -  total flux cleaned = 0.0340904 Jy
! Component: 3300  -  total flux cleaned = 0.034158 Jy
! Component: 3350  -  total flux cleaned = 0.0342249 Jy
! Component: 3400  -  total flux cleaned = 0.034323 Jy
! Component: 3450  -  total flux cleaned = 0.0344205 Jy
! Component: 3500  -  total flux cleaned = 0.0344847 Jy
! Component: 3550  -  total flux cleaned = 0.0345166 Jy
! Component: 3600  -  total flux cleaned = 0.0346098 Jy
! Component: 3650  -  total flux cleaned = 0.0345783 Jy
! Component: 3700  -  total flux cleaned = 0.0346093 Jy
! Component: 3750  -  total flux cleaned = 0.03464 Jy
! Component: 3800  -  total flux cleaned = 0.0347895 Jy
! Component: 3850  -  total flux cleaned = 0.0348486 Jy
! Component: 3900  -  total flux cleaned = 0.0349363 Jy
! Component: 3950  -  total flux cleaned = 0.0350522 Jy
! Component: 4000  -  total flux cleaned = 0.0351095 Jy
! Component: 4050  -  total flux cleaned = 0.0352518 Jy
! Total flux subtracted in 4096 components = 0.0353641 Jy
! Clean residual min=-0.001551 max=0.001586 Jy/beam
! Clean residual mean=0.000002 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.197145 Jy
keep
! Adding 618 model components to the UV plane model.
! The established model now contains 724 components and 0.197145 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1639+8631_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.956 x 10.53 at 12.56 degrees (North through East)
! Clean map  min=-0.0041075  max=0.07852 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1639+8631_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0785197 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000594521 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.27149 2.27149 4.54297 9.08594 18.1719 36.3438 72.6875
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0017 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.078 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1639+8631_S_uvs.log closed on Sun Oct  6 10:34:49 2013