! Started logfile: /g0/scr/pima/npcsa_uvs/J1613+3412_S_uvs.log on Sun Oct 6 10:34:39 2013 obs /g0/scr/pima/npcsa_uvs/J1613+3412_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1613+3412_S_uva.fits ! AN table 1: 9 integrations on 36 of 36 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J1613+3412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1296 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1613+3412_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.953305Jy sigma=131.857086 ! Fit after self-cal, rms=2.839016Jy sigma=98.412040 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.182 mas, bmaj=8.278 mas, bpa=11.33 degrees ! Estimated noise=0.962902 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.90439 Jy ! Component: 100 - total flux cleaned = 3.81215 Jy ! Total flux subtracted in 100 components = 3.81215 Jy ! Clean residual min=-0.199914 max=0.383649 Jy/beam ! Clean residual mean=-0.000329 rms=0.067765 Jy/beam ! Combined flux in latest and established models = 3.81215 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 3.81215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.848968Jy sigma=29.377983 ! Fit after self-cal, rms=0.847499Jy sigma=29.337754 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.641 mas, bmaj=8.465 mas, bpa=11.2 degrees ! Estimated noise=0.710978 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.532798 Jy ! Component: 100 - total flux cleaned = 0.829992 Jy ! Component: 150 - total flux cleaned = 1.02319 Jy ! Component: 200 - total flux cleaned = 1.15712 Jy ! Total flux subtracted in 200 components = 1.15712 Jy ! Clean residual min=-0.168452 max=0.128802 Jy/beam ! Clean residual mean=0.000094 rms=0.035804 Jy/beam ! Combined flux in latest and established models = 4.96927 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 61 components and 4.96928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.497674Jy sigma=16.236445 ! Fit after self-cal, rms=0.496637Jy sigma=16.205840 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.99 HN 0.99 KP 0.97 ! LA 1.10 MK 0.95 NL 0.99 OV 0.99 ! SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.01 KP 0.98 ! LA 1.05 MK 1.02 NL 0.99 OV 0.99 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.04 HN 1.05 KP 1.00 ! LA 0.86 MK 1.14 NL 1.11 OV 1.04 ! SC 1.07 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.06 HN 0.98 KP 0.92 ! LA 0.75 MK 1.16 NL 1.02 OV 0.88 ! SC 1.13 ! ! ! Fit before self-cal, rms=0.496637Jy sigma=16.205840 ! Fit after self-cal, rms=0.157293Jy sigma=3.116525 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.707 mas, bmaj=8.578 mas, bpa=10.97 degrees ! Estimated noise=0.709846 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402655 Jy ! Component: 100 - total flux cleaned = 0.00397929 Jy ! Component: 150 - total flux cleaned = 0.00648694 Jy ! Component: 200 - total flux cleaned = 0.00872333 Jy ! Total flux subtracted in 200 components = 0.00872333 Jy ! Clean residual min=-0.023144 max=0.020091 Jy/beam ! Clean residual mean=0.000009 rms=0.004569 Jy/beam ! Combined flux in latest and established models = 4.978 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 4.978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145418Jy sigma=2.993963 ! Fit after self-cal, rms=0.146523Jy sigma=2.986473 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146523Jy sigma=2.986473 ! Fit after self-cal, rms=0.146564Jy sigma=2.977401 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.71 mas, bmaj=8.574 mas, bpa=10.97 degrees ! Estimated noise=0.709683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000729683 Jy ! Component: 100 - total flux cleaned = 0.000920826 Jy ! Component: 150 - total flux cleaned = 0.0029148 Jy ! Component: 200 - total flux cleaned = 0.00521775 Jy ! Total flux subtracted in 200 components = 0.00521775 Jy ! Clean residual min=-0.020507 max=0.017836 Jy/beam ! Clean residual mean=0.000010 rms=0.004144 Jy/beam ! Combined flux in latest and established models = 4.98322 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 75 components and 4.98322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138237Jy sigma=2.917481 ! Fit after self-cal, rms=0.139084Jy sigma=2.912919 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000919394 Jy ! Component: 100 - total flux cleaned = 0.00181403 Jy ! Component: 150 - total flux cleaned = 0.00306951 Jy ! Component: 200 - total flux cleaned = 0.00465596 Jy ! Total flux subtracted in 200 components = 0.00465596 Jy ! Clean residual min=-0.018705 max=0.017275 Jy/beam ! Clean residual mean=0.000013 rms=0.003918 Jy/beam ! Combined flux in latest and established models = 4.98787 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 4.98788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132764Jy sigma=2.874470 ! Fit after self-cal, rms=0.133447Jy sigma=2.871411 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133447Jy sigma=2.871411 ! Fit after self-cal, rms=0.133428Jy sigma=2.864006 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.711 mas, bmaj=8.57 mas, bpa=10.97 degrees ! Estimated noise=0.70952 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144989 Jy ! Component: 100 - total flux cleaned = 0.00224948 Jy ! Component: 150 - total flux cleaned = 0.00376576 Jy ! Component: 200 - total flux cleaned = 0.00484893 Jy ! Total flux subtracted in 200 components = 0.00484893 Jy ! Clean residual min=-0.017720 max=0.015785 Jy/beam ! Clean residual mean=0.000013 rms=0.003653 Jy/beam ! Combined flux in latest and established models = 4.99272 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 78 components and 4.99272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127797Jy sigma=2.832864 ! Fit after self-cal, rms=0.128319Jy sigma=2.830725 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312862 Jy ! Component: 100 - total flux cleaned = 0.00137424 Jy ! Component: 150 - total flux cleaned = 0.00236576 Jy ! Component: 200 - total flux cleaned = 0.00267647 Jy ! Total flux subtracted in 200 components = 0.00267647 Jy ! Clean residual min=-0.016291 max=0.015235 Jy/beam ! Clean residual mean=0.000015 rms=0.003507 Jy/beam ! Combined flux in latest and established models = 4.9954 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 81 components and 4.9954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123973Jy sigma=2.807213 ! Fit after self-cal, rms=0.124440Jy sigma=2.805393 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124440Jy sigma=2.805393 ! Fit after self-cal, rms=0.124434Jy sigma=2.801781 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.963 mas, bmaj=10.1 mas, bpa=4.505 degrees ! Estimated noise=0.724991 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374597 Jy ! Component: 100 - total flux cleaned = 0.00508525 Jy ! Component: 150 - total flux cleaned = 0.00544095 Jy ! Component: 200 - total flux cleaned = 0.00575412 Jy ! Total flux subtracted in 200 components = 0.00575412 Jy ! Clean residual min=-0.012979 max=0.011641 Jy/beam ! Clean residual mean=0.000019 rms=0.003137 Jy/beam ! Combined flux in latest and established models = 5.00115 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 88 components and 5.00115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124827Jy sigma=2.790622 ! Fit after self-cal, rms=0.124851Jy sigma=2.789536 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.20531e-05 Jy ! Component: 100 - total flux cleaned = 0.000230051 Jy ! Component: 150 - total flux cleaned = 0.000231931 Jy ! Component: 200 - total flux cleaned = 0.000315006 Jy ! Total flux subtracted in 200 components = 0.000315006 Jy ! Clean residual min=-0.012784 max=0.011733 Jy/beam ! Clean residual mean=0.000020 rms=0.003089 Jy/beam ! Combined flux in latest and established models = 5.00147 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 91 components and 5.00147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125077Jy sigma=2.785317 ! Fit after self-cal, rms=0.125149Jy sigma=2.784864 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=8.567 mas, bpa=10.98 degrees ! Estimated noise=0.709296 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.712 x 8.567 at 10.98 degrees (North through East) ! Clean map min=-0.013427 max=3.8194 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125149Jy sigma=2.784864 ! Fit after self-cal, rms=0.121280Jy sigma=2.595110 ! Inverting map and beam ! Estimated beam: bmin=3.708 mas, bmaj=8.565 mas, bpa=10.98 degrees ! Estimated noise=0.708948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00162267 Jy ! Component: 100 - total flux cleaned = 0.00229372 Jy ! Component: 150 - total flux cleaned = 0.00260381 Jy ! Component: 200 - total flux cleaned = 0.00230282 Jy ! Total flux subtracted in 200 components = 0.00230282 Jy ! Clean residual min=-0.014490 max=0.013796 Jy/beam ! Clean residual mean=0.000014 rms=0.003192 Jy/beam ! Combined flux in latest and established models = 5.00377 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 5.00377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116799Jy sigma=2.576865 ! Fit after self-cal, rms=0.116978Jy sigma=2.575770 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.17808e-05 Jy ! Component: 100 - total flux cleaned = -7.08411e-05 Jy ! Component: 150 - total flux cleaned = -6.91487e-05 Jy ! Component: 200 - total flux cleaned = -6.26336e-05 Jy ! Total flux subtracted in 200 components = -6.26336e-05 Jy ! Clean residual min=-0.013749 max=0.013222 Jy/beam ! Clean residual mean=0.000015 rms=0.003099 Jy/beam ! Combined flux in latest and established models = 5.00371 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 94 components and 5.00371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113658Jy sigma=2.559795 ! Fit after self-cal, rms=0.113864Jy sigma=2.558894 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113864Jy sigma=2.558894 ! Fit after self-cal, rms=0.113824Jy sigma=2.557958 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=8.322 mas, bpa=11.14 degrees ! Estimated noise=0.972369 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.92707 Jy ! Component: 100 - total flux cleaned = 3.82556 Jy ! Component: 150 - total flux cleaned = 4.21619 Jy ! Component: 200 - total flux cleaned = 4.4358 Jy ! Total flux subtracted in 200 components = 4.4358 Jy ! Clean residual min=-0.083609 max=0.118847 Jy/beam ! Clean residual mean=-0.000161 rms=0.024891 Jy/beam ! Combined flux in latest and established models = 4.4358 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 4.4358 Jy ! Inverting map and beam ! Estimated beam: bmin=3.708 mas, bmaj=8.563 mas, bpa=10.99 degrees ! Estimated noise=0.708758 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195458 Jy ! Component: 100 - total flux cleaned = 0.317725 Jy ! Component: 150 - total flux cleaned = 0.397857 Jy ! Component: 200 - total flux cleaned = 0.453066 Jy ! Total flux subtracted in 200 components = 0.453066 Jy ! Clean residual min=-0.028778 max=0.034665 Jy/beam ! Clean residual mean=-0.000058 rms=0.007789 Jy/beam ! Combined flux in latest and established models = 4.88887 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 4.88887 Jy ! Inverting map ! Added new window around map position (-25.5, -46). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392259 Jy ! Component: 100 - total flux cleaned = 0.0666943 Jy ! Component: 150 - total flux cleaned = 0.0792829 Jy ! Component: 200 - total flux cleaned = 0.0870226 Jy ! Total flux subtracted in 200 components = 0.0870226 Jy ! Clean residual min=-0.019457 max=0.016037 Jy/beam ! Clean residual mean=-0.000005 rms=0.003964 Jy/beam ! Combined flux in latest and established models = 4.97589 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 60 components and 4.97589 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.96 mas, bmaj=10.1 mas, bpa=4.516 degrees ! Estimated noise=0.725114 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153208 Jy ! Component: 100 - total flux cleaned = 0.0247672 Jy ! Component: 150 - total flux cleaned = 0.0308338 Jy ! Component: 200 - total flux cleaned = 0.0321099 Jy ! Total flux subtracted in 200 components = 0.0321099 Jy ! Clean residual min=-0.010942 max=0.010326 Jy/beam ! Clean residual mean=0.000011 rms=0.002918 Jy/beam ! Combined flux in latest and established models = 5.008 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000669279 Jy ! Component: 100 - total flux cleaned = 0.0013001 Jy ! Component: 150 - total flux cleaned = 0.001892 Jy ! Component: 200 - total flux cleaned = 0.00230582 Jy ! Total flux subtracted in 200 components = 0.00230582 Jy ! Clean residual min=-0.010599 max=0.010282 Jy/beam ! Clean residual mean=0.000013 rms=0.002841 Jy/beam ! Combined flux in latest and established models = 5.01031 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 5.01031 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.708 mas, bmaj=8.563 mas, bpa=10.99 degrees ! Estimated noise=0.708758 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00200337 Jy ! Component: 100 - total flux cleaned = -0.000164021 Jy ! Component: 150 - total flux cleaned = 0.000644028 Jy ! Component: 200 - total flux cleaned = 0.00099942 Jy ! Total flux subtracted in 200 components = 0.00099942 Jy ! Clean residual min=-0.016159 max=0.012447 Jy/beam ! Clean residual mean=0.000010 rms=0.003084 Jy/beam ! Combined flux in latest and established models = 5.01131 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 5.01131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118390Jy sigma=2.566370 ! Fit after self-cal, rms=0.118516Jy sigma=2.562628 wmodel /g0/scr/pima/npcsa_uvs/J1613+3412_S_map.mod ! Writing 90 model components to file: /g0/scr/pima/npcsa_uvs/J1613+3412_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J1613+3412_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1613+3412_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1613+3412_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J1613+3412_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00539499 Jy ! Component: 100 - total flux cleaned = -0.00780626 Jy ! Component: 150 - total flux cleaned = -0.00959604 Jy ! Component: 200 - total flux cleaned = -0.0112591 Jy ! Component: 250 - total flux cleaned = -0.0124841 Jy ! Component: 300 - total flux cleaned = -0.0134837 Jy ! Component: 350 - total flux cleaned = -0.0141259 Jy ! Component: 400 - total flux cleaned = -0.0138274 Jy ! Component: 450 - total flux cleaned = -0.0136802 Jy ! Component: 500 - total flux cleaned = -0.0132475 Jy ! Component: 550 - total flux cleaned = -0.0135287 Jy ! Component: 600 - total flux cleaned = -0.0139365 Jy ! Component: 650 - total flux cleaned = -0.0143354 Jy ! Component: 700 - total flux cleaned = -0.0147255 Jy ! Component: 750 - total flux cleaned = -0.014853 Jy ! Component: 800 - total flux cleaned = -0.0152248 Jy ! Component: 850 - total flux cleaned = -0.0148587 Jy ! Component: 900 - total flux cleaned = -0.0147392 Jy ! Component: 950 - total flux cleaned = -0.0143901 Jy ! Component: 1000 - total flux cleaned = -0.0141624 Jy ! Component: 1050 - total flux cleaned = -0.0140499 Jy ! Component: 1100 - total flux cleaned = -0.0142688 Jy ! Component: 1150 - total flux cleaned = -0.0136198 Jy ! Component: 1200 - total flux cleaned = -0.013408 Jy ! Component: 1250 - total flux cleaned = -0.0133023 Jy ! Component: 1300 - total flux cleaned = -0.0128879 Jy ! Component: 1350 - total flux cleaned = -0.012277 Jy ! Component: 1400 - total flux cleaned = -0.0118755 Jy ! Component: 1450 - total flux cleaned = -0.0114804 Jy ! Component: 1500 - total flux cleaned = -0.0114788 Jy ! Component: 1550 - total flux cleaned = -0.0107086 Jy ! Component: 1600 - total flux cleaned = -0.0105184 Jy ! Component: 1650 - total flux cleaned = -0.0102369 Jy ! Component: 1700 - total flux cleaned = -0.0101445 Jy ! Component: 1750 - total flux cleaned = -0.00959656 Jy ! Component: 1800 - total flux cleaned = -0.0095978 Jy ! Component: 1850 - total flux cleaned = -0.00924188 Jy ! Component: 1900 - total flux cleaned = -0.00906635 Jy ! Component: 1950 - total flux cleaned = -0.00880554 Jy ! Component: 2000 - total flux cleaned = -0.00871868 Jy ! Component: 2050 - total flux cleaned = -0.00846344 Jy ! Component: 2100 - total flux cleaned = -0.00821262 Jy ! Component: 2150 - total flux cleaned = -0.00846161 Jy ! Component: 2200 - total flux cleaned = -0.00821518 Jy ! Component: 2250 - total flux cleaned = -0.00797374 Jy ! Component: 2300 - total flux cleaned = -0.00805434 Jy ! Component: 2350 - total flux cleaned = -0.00773747 Jy ! Component: 2400 - total flux cleaned = -0.0075815 Jy ! Component: 2450 - total flux cleaned = -0.00750417 Jy ! Component: 2500 - total flux cleaned = -0.00765702 Jy ! Component: 2550 - total flux cleaned = -0.00750521 Jy ! Component: 2600 - total flux cleaned = -0.0075053 Jy ! Component: 2650 - total flux cleaned = -0.00743076 Jy ! Component: 2700 - total flux cleaned = -0.00735756 Jy ! Component: 2750 - total flux cleaned = -0.007358 Jy ! Component: 2800 - total flux cleaned = -0.00750311 Jy ! Component: 2850 - total flux cleaned = -0.00743047 Jy ! Component: 2900 - total flux cleaned = -0.00757288 Jy ! Component: 2950 - total flux cleaned = -0.00757287 Jy ! Component: 3000 - total flux cleaned = -0.00757265 Jy ! Component: 3050 - total flux cleaned = -0.00750324 Jy ! Component: 3100 - total flux cleaned = -0.00771009 Jy ! Component: 3150 - total flux cleaned = -0.0076407 Jy ! Component: 3200 - total flux cleaned = -0.00757257 Jy ! Component: 3250 - total flux cleaned = -0.00750471 Jy ! Component: 3300 - total flux cleaned = -0.0073038 Jy ! Component: 3350 - total flux cleaned = -0.00736971 Jy ! Component: 3400 - total flux cleaned = -0.00743573 Jy ! Component: 3450 - total flux cleaned = -0.00736982 Jy ! Component: 3500 - total flux cleaned = -0.00743535 Jy ! Component: 3550 - total flux cleaned = -0.00750061 Jy ! Component: 3600 - total flux cleaned = -0.00762934 Jy ! Component: 3650 - total flux cleaned = -0.00769365 Jy ! Component: 3700 - total flux cleaned = -0.00782122 Jy ! Component: 3750 - total flux cleaned = -0.00782149 Jy ! Component: 3800 - total flux cleaned = -0.00794759 Jy ! Component: 3850 - total flux cleaned = -0.00782198 Jy ! Component: 3900 - total flux cleaned = -0.00794662 Jy ! Component: 3950 - total flux cleaned = -0.00782248 Jy ! Component: 4000 - total flux cleaned = -0.00776068 Jy ! Component: 4050 - total flux cleaned = -0.00794539 Jy ! Total flux subtracted in 4096 components = -0.00788385 Jy ! Clean residual min=-0.003436 max=0.003964 Jy/beam ! Clean residual mean=0.000003 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 5.00342 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 324 components and 5.00342 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1613+3412_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.708 x 8.563 at 10.99 degrees (North through East) ! Clean map min=-0.01134 max=3.8175 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1613+3412_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.81745 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0010272 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.080724 0.080724 0.161448 0.322896 0.645792 1.29158 2.58317 5.16634 10.3327 20.6654 41.3307 82.6614 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak=",int(1000*peak_flux)/1000 ! peak= 3.817 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1613+3412_S_uvs.log closed on Sun Oct 6 10:34:43 2013