! Started logfile: /g0/scr/pima/npcsa_uvs/J1609+7939_S_uvs.log on Sun Oct  6 10:34:36 2013
obs /g0/scr/pima/npcsa_uvs/J1609+7939_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1609+7939_S_uva.fits
! AN table 1: 54 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.854424 visibilities/baseline/integration-bin.
! Found source: J1609+7939
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6644 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1609+7939_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.030970Jy  sigma=2.020276
! Fit after  self-cal, rms=0.821398Jy  sigma=1.157135
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.256 mas, bmaj=10.2 mas, bpa=-4.239 degrees
! Estimated noise=14.8606 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.224316 Jy
! Component: 100  -  total flux cleaned = 0.304018 Jy
! Total flux subtracted in 100 components = 0.304018 Jy
! Clean residual min=-0.055130 max=0.055154 Jy/beam
! Clean residual mean=-0.000345 rms=0.024084 Jy/beam
! Combined flux in latest and established models = 0.304018 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.304018 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174564Jy  sigma=0.464963
! Fit after  self-cal, rms=0.173752Jy  sigma=0.464198
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.231 mas, bmaj=11.09 mas, bpa=-5.164 degrees
! Estimated noise=5.64752 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0791247 Jy
! Component: 100  -  total flux cleaned = 0.11526 Jy
! Component: 150  -  total flux cleaned = 0.129259 Jy
! Component: 200  -  total flux cleaned = 0.141622 Jy
! Total flux subtracted in 200 components = 0.141622 Jy
! Clean residual min=-0.022206 max=0.022273 Jy/beam
! Clean residual mean=-0.000108 rms=0.011347 Jy/beam
! Combined flux in latest and established models = 0.445641 Jy
! Performing phase self-cal
! Adding 133 model components to the UV plane model.
! The established model now contains 168 components and 0.445641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144692Jy  sigma=0.275711
! Fit after  self-cal, rms=0.144676Jy  sigma=0.274926
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.87     HN        0.92     KP        0.97     
!   LA        1.00     MK        0.92     NL        1.02     OV        0.91     
!   SC        0.87     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.88     HN        0.93     KP        0.99     
!   LA        0.99     MK        0.89     NL        1.04     OV        0.92     
!   SC        0.86     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.27     FD        0.92     HN        0.97     KP        1.01     
!   LA        0.83     MK        0.79     NL        1.12     OV        0.98     
!   SC        0.86     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.91     HN        0.91     KP        0.92     
!   LA        0.75     MK        0.80     NL        1.03     OV        0.85     
!   SC        0.90     
! 
! 
! Fit before self-cal, rms=0.144676Jy  sigma=0.274926
! Fit after  self-cal, rms=0.126858Jy  sigma=0.215788
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.179 mas, bmaj=11.21 mas, bpa=-5.067 degrees
! Estimated noise=5.00698 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199991 Jy
! Component: 100  -  total flux cleaned = 0.00776782 Jy
! Component: 150  -  total flux cleaned = 0.0103342 Jy
! Component: 200  -  total flux cleaned = 0.0114185 Jy
! Total flux subtracted in 200 components = 0.0114185 Jy
! Clean residual min=-0.005465 max=0.005540 Jy/beam
! Clean residual mean=0.000006 rms=0.002005 Jy/beam
! Combined flux in latest and established models = 0.457059 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 219 components and 0.457059 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120675Jy  sigma=0.208976
! Fit after  self-cal, rms=0.120584Jy  sigma=0.208730
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120584Jy  sigma=0.208730
! Fit after  self-cal, rms=0.115652Jy  sigma=0.207485
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.11 mas, bmaj=11.17 mas, bpa=-4.839 degrees
! Estimated noise=4.79116 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0056073 Jy
! Component: 100  -  total flux cleaned = -0.0019066 Jy
! Component: 150  -  total flux cleaned = -0.00122443 Jy
! Component: 200  -  total flux cleaned = 8.35407e-06 Jy
! Total flux subtracted in 200 components = 8.35407e-06 Jy
! Clean residual min=-0.003279 max=0.003306 Jy/beam
! Clean residual mean=0.000003 rms=0.001306 Jy/beam
! Combined flux in latest and established models = 0.457068 Jy
selfcal
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 279 components and 0.457067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112607Jy  sigma=0.206709
! Fit after  self-cal, rms=0.112626Jy  sigma=0.206661
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.22194e-05 Jy
! Component: 100  -  total flux cleaned = 0.00160626 Jy
! Component: 150  -  total flux cleaned = 0.00229579 Jy
! Component: 200  -  total flux cleaned = 0.00324676 Jy
! Total flux subtracted in 200 components = 0.00324676 Jy
! Clean residual min=-0.002565 max=0.002548 Jy/beam
! Clean residual mean=0.000004 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.460314 Jy
! Performing phase self-cal
! Adding 74 model components to the UV plane model.
! The established model now contains 330 components and 0.460314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111991Jy  sigma=0.205964
! Fit after  self-cal, rms=0.112002Jy  sigma=0.205951
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112002Jy  sigma=0.205951
! Fit after  self-cal, rms=0.107570Jy  sigma=0.204867
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.052 mas, bmaj=11.13 mas, bpa=-4.74 degrees
! Estimated noise=4.58784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00798616 Jy
! Component: 100  -  total flux cleaned = -0.00881384 Jy
! Component: 150  -  total flux cleaned = -0.00909102 Jy
! Component: 200  -  total flux cleaned = -0.00868858 Jy
! Total flux subtracted in 200 components = -0.00868858 Jy
! Clean residual min=-0.002136 max=0.002133 Jy/beam
! Clean residual mean=0.000004 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.451626 Jy
selfcal
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 377 components and 0.451626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105636Jy  sigma=0.205368
! Fit after  self-cal, rms=0.105669Jy  sigma=0.205350
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103613 Jy
! Component: 100  -  total flux cleaned = -0.000678453 Jy
! Component: 150  -  total flux cleaned = -0.000454847 Jy
! Component: 200  -  total flux cleaned = -0.000670267 Jy
! Total flux subtracted in 200 components = -0.000670267 Jy
! Clean residual min=-0.001720 max=0.001718 Jy/beam
! Clean residual mean=0.000004 rms=0.000659 Jy/beam
! Combined flux in latest and established models = 0.450955 Jy
! Performing phase self-cal
! Adding 76 model components to the UV plane model.
! The established model now contains 414 components and 0.450955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105337Jy  sigma=0.205088
! Fit after  self-cal, rms=0.105342Jy  sigma=0.205080
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105342Jy  sigma=0.205080
! Fit after  self-cal, rms=0.101751Jy  sigma=0.204087
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.073 mas, bmaj=12.51 mas, bpa=-6.034 degrees
! Estimated noise=4.09245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00754373 Jy
! Component: 100  -  total flux cleaned = -0.00855646 Jy
! Component: 150  -  total flux cleaned = -0.00886926 Jy
! Component: 200  -  total flux cleaned = -0.00904991 Jy
! Total flux subtracted in 200 components = -0.00904991 Jy
! Clean residual min=-0.001434 max=0.001434 Jy/beam
! Clean residual mean=0.000006 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.441905 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 456 components and 0.441905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100191Jy  sigma=0.205006
! Fit after  self-cal, rms=0.100216Jy  sigma=0.204979
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271366 Jy
! Component: 100  -  total flux cleaned = -0.000579064 Jy
! Component: 150  -  total flux cleaned = -0.00122642 Jy
! Component: 200  -  total flux cleaned = -0.00149627 Jy
! Total flux subtracted in 200 components = -0.00149627 Jy
! Clean residual min=-0.001100 max=0.001091 Jy/beam
! Clean residual mean=0.000005 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.440409 Jy
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 496 components and 0.440409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100078Jy  sigma=0.204883
! Fit after  self-cal, rms=0.100078Jy  sigma=0.204876
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.008 mas, bmaj=11.11 mas, bpa=-4.678 degrees
! Estimated noise=4.40845 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.008 x 11.11 at -4.678 degrees (North through East)
! Clean map  min=-0.0080477  max=0.2071 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.106 mas, bmaj=10.17 mas, bpa=-3.538 degrees
! Estimated noise=11.1629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.172532 Jy
! Component: 100  -  total flux cleaned = 0.253969 Jy
! Component: 150  -  total flux cleaned = 0.271247 Jy
! Component: 200  -  total flux cleaned = 0.26954 Jy
! Total flux subtracted in 200 components = 0.26954 Jy
! Clean residual min=-0.029189 max=0.029208 Jy/beam
! Clean residual mean=-0.000182 rms=0.013554 Jy/beam
! Combined flux in latest and established models = 0.26954 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 105 model components to the UV plane model.
! The established model now contains 105 components and 0.26954 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.008 mas, bmaj=11.11 mas, bpa=-4.678 degrees
! Estimated noise=4.40845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0483349 Jy
! Component: 100  -  total flux cleaned = 0.0756826 Jy
! Component: 150  -  total flux cleaned = 0.0889821 Jy
! Component: 200  -  total flux cleaned = 0.0962259 Jy
! Total flux subtracted in 200 components = 0.0962259 Jy
! Clean residual min=-0.011896 max=0.011934 Jy/beam
! Clean residual mean=-0.000061 rms=0.005538 Jy/beam
! Combined flux in latest and established models = 0.365766 Jy
! Adding 125 model components to the UV plane model.
! The established model now contains 230 components and 0.365766 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.073 mas, bmaj=12.51 mas, bpa=-6.034 degrees
! Estimated noise=4.09245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00912801 Jy
! Component: 100  -  total flux cleaned = 0.0156554 Jy
! Component: 150  -  total flux cleaned = 0.0162997 Jy
! Component: 200  -  total flux cleaned = 0.0170371 Jy
! Total flux subtracted in 200 components = 0.0170371 Jy
! Clean residual min=-0.005364 max=0.005380 Jy/beam
! Clean residual mean=-0.000015 rms=0.002557 Jy/beam
! Combined flux in latest and established models = 0.382803 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254991 Jy
! Component: 100  -  total flux cleaned = -0.000441321 Jy
! Component: 150  -  total flux cleaned = -0.00102345 Jy
! Component: 200  -  total flux cleaned = -0.00152712 Jy
! Total flux subtracted in 200 components = -0.00152712 Jy
! Clean residual min=-0.002615 max=0.002605 Jy/beam
! Clean residual mean=-0.000000 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 0.381276 Jy
! Adding 219 model components to the UV plane model.
! The established model now contains 439 components and 0.381276 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.008 mas, bmaj=11.11 mas, bpa=-4.678 degrees
! Estimated noise=4.40845 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00219317 Jy
! Component: 100  -  total flux cleaned = 0.00320102 Jy
! Component: 150  -  total flux cleaned = 0.00385829 Jy
! Component: 200  -  total flux cleaned = 0.00433372 Jy
! Total flux subtracted in 200 components = 0.00433372 Jy
! Clean residual min=-0.001941 max=0.001947 Jy/beam
! Clean residual mean=0.000003 rms=0.000662 Jy/beam
! Combined flux in latest and established models = 0.38561 Jy
selfcal
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 501 components and 0.38561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100477Jy  sigma=0.206196
! Fit after  self-cal, rms=0.100366Jy  sigma=0.205981
wmodel /g0/scr/pima/npcsa_uvs/J1609+7939_S_map.mod
! Writing 501 model components to file: /g0/scr/pima/npcsa_uvs/J1609+7939_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1609+7939_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1609+7939_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1609+7939_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/g0/scr/pima/npcsa_uvs/J1609+7939_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.008 x 11.11 at -4.678 degrees (North through East)
! Clean map  min=-0.0090977  max=0.18336 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1609+7939_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.183357 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000624235 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.02135 1.02135 2.04269 4.08538 8.17076 16.3415 32.6831 65.3661
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0018 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.183 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1609+7939_S_uvs.log closed on Sun Oct  6 10:34:39 2013