! Started logfile: /g0/scr/pima/npcsa_uvs/J1607+8502_S_uvs.log on Sun Oct  6 10:34:31 2013
obs /g0/scr/pima/npcsa_uvs/J1607+8502_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1607+8502_S_uva.fits
! AN table 1: 54 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.812757 visibilities/baseline/integration-bin.
! Found source: J1607+8502
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6320 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1607+8502_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 32 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006667Jy  sigma=0.764019
! Fit after  self-cal, rms=0.950826Jy  sigma=0.674396
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.615 mas, bmaj=9.968 mas, bpa=1.098 degrees
! Estimated noise=24.6425 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0642569 Jy
! Component: 100  -  total flux cleaned = 0.0785143 Jy
! Total flux subtracted in 100 components = 0.0785143 Jy
! Clean residual min=-0.010792 max=0.010294 Jy/beam
! Clean residual mean=-0.000005 rms=0.002549 Jy/beam
! Combined flux in latest and established models = 0.0785143 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0785143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107695Jy  sigma=0.091260
! Fit after  self-cal, rms=0.105931Jy  sigma=0.090143
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.129 mas, bmaj=10.6 mas, bpa=0.6797 degrees
! Estimated noise=13.305 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00809807 Jy
! Component: 100  -  total flux cleaned = 0.012021 Jy
! Component: 150  -  total flux cleaned = 0.0130093 Jy
! Component: 200  -  total flux cleaned = 0.0134124 Jy
! Total flux subtracted in 200 components = 0.0134124 Jy
! Clean residual min=-0.007788 max=0.009883 Jy/beam
! Clean residual mean=-0.000014 rms=0.002327 Jy/beam
! Combined flux in latest and established models = 0.0919267 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 26 components and 0.0919267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107570Jy  sigma=0.088242
! Fit after  self-cal, rms=0.107412Jy  sigma=0.088148
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.90     HN        0.84     KP        0.80     
!   LA        0.96     MK        0.85     NL        1.01     OV        1.01     
!   SC        0.71     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.91     HN        0.90     KP        0.78     
!   LA        0.84     MK        0.80     NL        1.11     OV        1.00     
!   SC        0.79     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.66     FD        0.88     HN        0.91     KP        0.97     
!   LA        0.63     MK        0.90     NL        1.18     OV        1.09     
!   SC        0.81     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.92     HN        0.78     KP        0.77     
!   LA        0.57     MK        1.19     NL        1.16     OV        0.80     
!   SC        0.89     
! 
! 
! Fit before self-cal, rms=0.107412Jy  sigma=0.088148
! Fit after  self-cal, rms=0.089407Jy  sigma=0.083070
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.136 mas, bmaj=10.48 mas, bpa=0.3796 degrees
! Estimated noise=10.0916 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0158056 Jy
! Component: 100  -  total flux cleaned = -0.0184553 Jy
! Component: 150  -  total flux cleaned = -0.0182617 Jy
! Component: 200  -  total flux cleaned = -0.0181014 Jy
! Total flux subtracted in 200 components = -0.0181014 Jy
! Clean residual min=-0.003507 max=0.004624 Jy/beam
! Clean residual mean=-0.000005 rms=0.001035 Jy/beam
! Combined flux in latest and established models = 0.0738253 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 34 components and 0.0738253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082018Jy  sigma=0.085390
! Fit after  self-cal, rms=0.082456Jy  sigma=0.085045
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082456Jy  sigma=0.085045
! Fit after  self-cal, rms=0.070211Jy  sigma=0.082462
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.126 mas, bmaj=10.44 mas, bpa=0.323 degrees
! Estimated noise=7.80857 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0121127 Jy
! Component: 100  -  total flux cleaned = -0.0147736 Jy
! Component: 150  -  total flux cleaned = -0.0151672 Jy
! Component: 200  -  total flux cleaned = -0.015087 Jy
! Total flux subtracted in 200 components = -0.015087 Jy
! Clean residual min=-0.002652 max=0.003379 Jy/beam
! Clean residual mean=-0.000003 rms=0.000782 Jy/beam
! Combined flux in latest and established models = 0.0587383 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 42 components and 0.0587383 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064591Jy  sigma=0.084873
! Fit after  self-cal, rms=0.064652Jy  sigma=0.084851
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-18, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196235 Jy
! Component: 100  -  total flux cleaned = 0.00218677 Jy
! Component: 150  -  total flux cleaned = 0.0026661 Jy
! Component: 200  -  total flux cleaned = 0.00299671 Jy
! Total flux subtracted in 200 components = 0.00299671 Jy
! Clean residual min=-0.002656 max=0.002840 Jy/beam
! Clean residual mean=-0.000003 rms=0.000733 Jy/beam
! Combined flux in latest and established models = 0.061735 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.061735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064440Jy  sigma=0.084761
! Fit after  self-cal, rms=0.064416Jy  sigma=0.084688
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064416Jy  sigma=0.084688
! Fit after  self-cal, rms=0.053818Jy  sigma=0.082148
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.109 mas, bmaj=10.43 mas, bpa=0.2885 degrees
! Estimated noise=5.99682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00919835 Jy
! Component: 100  -  total flux cleaned = -0.0114055 Jy
! Component: 150  -  total flux cleaned = -0.0116765 Jy
! Component: 200  -  total flux cleaned = -0.0118889 Jy
! Total flux subtracted in 200 components = -0.0118889 Jy
! Clean residual min=-0.001886 max=0.002131 Jy/beam
! Clean residual mean=-0.000003 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.0498461 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 76 components and 0.0498461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049598Jy  sigma=0.084412
! Fit after  self-cal, rms=0.049552Jy  sigma=0.084355
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000446125 Jy
! Component: 100  -  total flux cleaned = 0.00057415 Jy
! Component: 150  -  total flux cleaned = 0.00074748 Jy
! Component: 200  -  total flux cleaned = 0.000931731 Jy
! Total flux subtracted in 200 components = 0.000931731 Jy
! Clean residual min=-0.001863 max=0.002100 Jy/beam
! Clean residual mean=-0.000002 rms=0.000531 Jy/beam
! Combined flux in latest and established models = 0.0507778 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 85 components and 0.0507778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049468Jy  sigma=0.084382
! Fit after  self-cal, rms=0.049468Jy  sigma=0.084367
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049468Jy  sigma=0.084367
! Fit after  self-cal, rms=0.041542Jy  sigma=0.081952
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.229 mas, bmaj=11.41 mas, bpa=1.04 degrees
! Estimated noise=6.10818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00775003 Jy
! Component: 100  -  total flux cleaned = -0.00921525 Jy
! Component: 150  -  total flux cleaned = -0.00938718 Jy
! Component: 200  -  total flux cleaned = -0.0094187 Jy
! Total flux subtracted in 200 components = -0.0094187 Jy
! Clean residual min=-0.001871 max=0.002270 Jy/beam
! Clean residual mean=-0.000006 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.0413591 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 106 components and 0.0413591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038249Jy  sigma=0.084384
! Fit after  self-cal, rms=0.038209Jy  sigma=0.084338
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000227429 Jy
! Component: 100  -  total flux cleaned = -0.000105081 Jy
! Component: 150  -  total flux cleaned = -1.77339e-05 Jy
! Component: 200  -  total flux cleaned = 6.0455e-05 Jy
! Total flux subtracted in 200 components = 6.0455e-05 Jy
! Clean residual min=-0.001704 max=0.002079 Jy/beam
! Clean residual mean=-0.000005 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.0414196 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 122 components and 0.0414196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038190Jy  sigma=0.084370
! Fit after  self-cal, rms=0.038184Jy  sigma=0.084360
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.095 mas, bmaj=10.42 mas, bpa=0.3237 degrees
! Estimated noise=4.643 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.095 x 10.42 at 0.3237 degrees (North through East)
! Clean map  min=-0.0016412  max=0.031079 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.586 mas, bmaj=9.88 mas, bpa=0.5179 degrees
! Estimated noise=8.48487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0219781 Jy
! Component: 100  -  total flux cleaned = 0.0277289 Jy
! Component: 150  -  total flux cleaned = 0.0307628 Jy
! Component: 200  -  total flux cleaned = 0.0331319 Jy
! Total flux subtracted in 200 components = 0.0331319 Jy
! Clean residual min=-0.003066 max=0.003066 Jy/beam
! Clean residual mean=-0.000001 rms=0.000791 Jy/beam
! Combined flux in latest and established models = 0.0331319 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.0331319 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.095 mas, bmaj=10.42 mas, bpa=0.3237 degrees
! Estimated noise=4.643 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0032339 Jy
! Component: 100  -  total flux cleaned = 0.00401303 Jy
! Component: 150  -  total flux cleaned = 0.00454314 Jy
! Component: 200  -  total flux cleaned = 0.00506534 Jy
! Total flux subtracted in 200 components = 0.00506534 Jy
! Clean residual min=-0.001709 max=0.001911 Jy/beam
! Clean residual mean=-0.000003 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.0381972 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 35 components and 0.0381972 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.229 mas, bmaj=11.41 mas, bpa=1.04 degrees
! Estimated noise=6.10818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000788426 Jy
! Component: 100  -  total flux cleaned = 0.00106178 Jy
! Component: 150  -  total flux cleaned = 0.0015312 Jy
! Component: 200  -  total flux cleaned = 0.00182558 Jy
! Total flux subtracted in 200 components = 0.00182558 Jy
! Clean residual min=-0.001922 max=0.002328 Jy/beam
! Clean residual mean=-0.000006 rms=0.000651 Jy/beam
! Combined flux in latest and established models = 0.0400228 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258685 Jy
! Component: 100  -  total flux cleaned = 0.000462919 Jy
! Component: 150  -  total flux cleaned = 0.000645695 Jy
! Component: 200  -  total flux cleaned = 0.000790199 Jy
! Total flux subtracted in 200 components = 0.000790199 Jy
! Clean residual min=-0.001784 max=0.002134 Jy/beam
! Clean residual mean=-0.000005 rms=0.000601 Jy/beam
! Combined flux in latest and established models = 0.040813 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 83 components and 0.040813 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.095 mas, bmaj=10.42 mas, bpa=0.3237 degrees
! Estimated noise=4.643 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206477 Jy
! Component: 100  -  total flux cleaned = 0.000451781 Jy
! Component: 150  -  total flux cleaned = 0.000654465 Jy
! Component: 200  -  total flux cleaned = 0.000829623 Jy
! Total flux subtracted in 200 components = 0.000829623 Jy
! Clean residual min=-0.001519 max=0.001544 Jy/beam
! Clean residual mean=-0.000001 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.0416426 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 94 components and 0.0416426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.038166Jy  sigma=0.084494
! Fit after  self-cal, rms=0.038171Jy  sigma=0.084460
wmodel /g0/scr/pima/npcsa_uvs/J1607+8502_S_map.mod
! Writing 94 model components to file: /g0/scr/pima/npcsa_uvs/J1607+8502_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1607+8502_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1607+8502_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1607+8502_S_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J1607+8502_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000206943 Jy
! Component: 100  -  total flux cleaned = 0.000307571 Jy
! Component: 150  -  total flux cleaned = 0.000258939 Jy
! Component: 200  -  total flux cleaned = 0.00023707 Jy
! Component: 250  -  total flux cleaned = 0.000237885 Jy
! Component: 300  -  total flux cleaned = 0.000196119 Jy
! Component: 350  -  total flux cleaned = 0.000155847 Jy
! Component: 400  -  total flux cleaned = 0.000136611 Jy
! Component: 450  -  total flux cleaned = 0.000116872 Jy
! Component: 500  -  total flux cleaned = 7.93138e-05 Jy
! Component: 550  -  total flux cleaned = 4.23674e-05 Jy
! Component: 600  -  total flux cleaned = -4.66748e-05 Jy
! Component: 650  -  total flux cleaned = -9.86423e-05 Jy
! Component: 700  -  total flux cleaned = -9.86309e-05 Jy
! Component: 750  -  total flux cleaned = -6.54174e-05 Jy
! Component: 800  -  total flux cleaned = -9.82189e-05 Jy
! Component: 850  -  total flux cleaned = -0.000130438 Jy
! Component: 900  -  total flux cleaned = -0.000114592 Jy
! Component: 950  -  total flux cleaned = -6.84925e-05 Jy
! Component: 1000  -  total flux cleaned = -3.83002e-05 Jy
! Component: 1050  -  total flux cleaned = -2.33242e-05 Jy
! Component: 1100  -  total flux cleaned = 3.6024e-05 Jy
! Component: 1150  -  total flux cleaned = 7.94591e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000107858 Jy
! Component: 1250  -  total flux cleaned = 0.000107667 Jy
! Component: 1300  -  total flux cleaned = 0.000149323 Jy
! Component: 1350  -  total flux cleaned = 0.000135485 Jy
! Component: 1400  -  total flux cleaned = 0.000175997 Jy
! Component: 1450  -  total flux cleaned = 0.00017576 Jy
! Component: 1500  -  total flux cleaned = 0.000175716 Jy
! Component: 1550  -  total flux cleaned = 0.000215345 Jy
! Component: 1600  -  total flux cleaned = 0.000228368 Jy
! Component: 1650  -  total flux cleaned = 0.000241333 Jy
! Component: 1700  -  total flux cleaned = 0.00029228 Jy
! Component: 1750  -  total flux cleaned = 0.000304816 Jy
! Component: 1800  -  total flux cleaned = 0.000342212 Jy
! Component: 1850  -  total flux cleaned = 0.000391616 Jy
! Component: 1900  -  total flux cleaned = 0.000428274 Jy
! Component: 1950  -  total flux cleaned = 0.000464628 Jy
! Component: 2000  -  total flux cleaned = 0.000512457 Jy
! Component: 2050  -  total flux cleaned = 0.000547968 Jy
! Component: 2100  -  total flux cleaned = 0.000594888 Jy
! Component: 2150  -  total flux cleaned = 0.000618095 Jy
! Component: 2200  -  total flux cleaned = 0.000664388 Jy
! Component: 2250  -  total flux cleaned = 0.000687196 Jy
! Component: 2300  -  total flux cleaned = 0.000721232 Jy
! Component: 2350  -  total flux cleaned = 0.000698922 Jy
! Component: 2400  -  total flux cleaned = 0.000732476 Jy
! Component: 2450  -  total flux cleaned = 0.000721471 Jy
! Component: 2500  -  total flux cleaned = 0.000754289 Jy
! Component: 2550  -  total flux cleaned = 0.000765185 Jy
! Component: 2600  -  total flux cleaned = 0.000776023 Jy
! Component: 2650  -  total flux cleaned = 0.000775896 Jy
! Component: 2700  -  total flux cleaned = 0.000807795 Jy
! Component: 2750  -  total flux cleaned = 0.00078668 Jy
! Component: 2800  -  total flux cleaned = 0.00078664 Jy
! Component: 2850  -  total flux cleaned = 0.000807392 Jy
! Component: 2900  -  total flux cleaned = 0.000786775 Jy
! Component: 2950  -  total flux cleaned = 0.00074584 Jy
! Component: 3000  -  total flux cleaned = 0.000817107 Jy
! Component: 3050  -  total flux cleaned = 0.000766613 Jy
! Component: 3100  -  total flux cleaned = 0.000806945 Jy
! Component: 3150  -  total flux cleaned = 0.000826874 Jy
! Component: 3200  -  total flux cleaned = 0.000876337 Jy
! Component: 3250  -  total flux cleaned = 0.00088613 Jy
! Component: 3300  -  total flux cleaned = 0.000895862 Jy
! Component: 3350  -  total flux cleaned = 0.000895791 Jy
! Component: 3400  -  total flux cleaned = 0.000924783 Jy
! Component: 3450  -  total flux cleaned = 0.000953644 Jy
! Component: 3500  -  total flux cleaned = 0.000991892 Jy
! Component: 3550  -  total flux cleaned = 0.00101082 Jy
! Component: 3600  -  total flux cleaned = 0.00103905 Jy
! Component: 3650  -  total flux cleaned = 0.00104841 Jy
! Component: 3700  -  total flux cleaned = 0.00106689 Jy
! Component: 3750  -  total flux cleaned = 0.0010854 Jy
! Component: 3800  -  total flux cleaned = 0.00111303 Jy
! Component: 3850  -  total flux cleaned = 0.00113128 Jy
! Component: 3900  -  total flux cleaned = 0.00116769 Jy
! Component: 3950  -  total flux cleaned = 0.00118565 Jy
! Component: 4000  -  total flux cleaned = 0.00120363 Jy
! Component: 4050  -  total flux cleaned = 0.00122146 Jy
! Total flux subtracted in 4096 components = 0.00123927 Jy
! Clean residual min=-0.000514 max=0.000578 Jy/beam
! Clean residual mean=-0.000000 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0428819 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 398 components and 0.0428818 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1607+8502_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.095 x 10.42 at 0.3237 degrees (North through East)
! Clean map  min=-0.0013517  max=0.030681 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1607+8502_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0306807 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000159424 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.55886 1.55886 3.11773 6.23546 12.4709 24.9418 49.8837 99.7673
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.03 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1607+8502_S_uvs.log closed on Sun Oct  6 10:34:35 2013