! Started logfile: /g0/scr/pima/npcsa_uvs/J1540+1447_X_uvs.log on Sun Oct  6 10:29:09 2013
obs /g0/scr/pima/npcsa_uvs/J1540+1447_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1540+1447_X_uva.fits
! AN table 1: 20 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.654167 visibilities/baseline/integration-bin.
! Found source: J1540+1447
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1884 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1540+1447_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.297523Jy  sigma=9.589258
! Fit after  self-cal, rms=0.254894Jy  sigma=1.306912
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7695 mas, bmaj=1.949 mas, bpa=-1.837 degrees
! Estimated noise=3.46188 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.706856 Jy
! Component: 100  -  total flux cleaned = 0.901074 Jy
! Total flux subtracted in 100 components = 0.901074 Jy
! Clean residual min=-0.036416 max=0.076269 Jy/beam
! Clean residual mean=-0.000012 rms=0.011482 Jy/beam
! Combined flux in latest and established models = 0.901074 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.901074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157409Jy  sigma=1.233851
! Fit after  self-cal, rms=0.156779Jy  sigma=1.231156
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0793841 Jy
! Component: 100  -  total flux cleaned = 0.118051 Jy
! Total flux subtracted in 100 components = 0.118051 Jy
! Clean residual min=-0.022474 max=0.036973 Jy/beam
! Clean residual mean=-0.000004 rms=0.006141 Jy/beam
! Combined flux in latest and established models = 1.01912 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 1.01912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119841Jy  sigma=0.865356
! Fit after  self-cal, rms=0.119630Jy  sigma=0.864486
! Inverting map 
! Added new window around map position (-1, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0332394 Jy
! Component: 100  -  total flux cleaned = 0.0508473 Jy
! Total flux subtracted in 100 components = 0.0508473 Jy
! Clean residual min=-0.020808 max=0.019140 Jy/beam
! Clean residual mean=-0.000003 rms=0.004709 Jy/beam
! Combined flux in latest and established models = 1.06997 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 1.06997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110288Jy  sigma=0.780321
! Fit after  self-cal, rms=0.109875Jy  sigma=0.778294
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8398 mas, bmaj=2.062 mas, bpa=-1.805 degrees
! Estimated noise=2.3862 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177692 Jy
! Component: 100  -  total flux cleaned = 0.0294411 Jy
! Component: 150  -  total flux cleaned = 0.03803 Jy
! Component: 200  -  total flux cleaned = 0.0444927 Jy
! Total flux subtracted in 200 components = 0.0444927 Jy
! Clean residual min=-0.017057 max=0.018349 Jy/beam
! Clean residual mean=-0.000003 rms=0.004457 Jy/beam
! Combined flux in latest and established models = 1.11446 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 41 components and 1.11446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106702Jy  sigma=0.748509
! Fit after  self-cal, rms=0.106549Jy  sigma=0.747582
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.07     KP        1.03     
!   LA        1.03     MK        1.03     NL        1.00     OV        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.03     KP        0.95     
!   LA        0.98     MK        0.97     NL        0.99     OV        0.99     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.02     HN        1.05     KP        0.86     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.03     KP        0.92     
!   LA        0.96     MK        1.01     NL        0.97     OV        1.01     
!   SC        1.02     
! 
! 
! Fit before self-cal, rms=0.106549Jy  sigma=0.747582
! Fit after  self-cal, rms=0.093249Jy  sigma=0.625155
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8408 mas, bmaj=2.057 mas, bpa=-1.746 degrees
! Estimated noise=2.39716 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00486281 Jy
! Component: 100  -  total flux cleaned = -0.00717631 Jy
! Component: 150  -  total flux cleaned = -0.00758854 Jy
! Component: 200  -  total flux cleaned = -0.0081322 Jy
! Total flux subtracted in 200 components = -0.0081322 Jy
! Clean residual min=-0.007857 max=0.006719 Jy/beam
! Clean residual mean=-0.000001 rms=0.001751 Jy/beam
! Combined flux in latest and established models = 1.10633 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 58 components and 1.10633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092667Jy  sigma=0.624048
! Fit after  self-cal, rms=0.092738Jy  sigma=0.623933
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092738Jy  sigma=0.623933
! Fit after  self-cal, rms=0.092676Jy  sigma=0.623286
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8415 mas, bmaj=2.059 mas, bpa=-1.732 degrees
! Estimated noise=2.39132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00380937 Jy
! Component: 100  -  total flux cleaned = -0.00563504 Jy
! Component: 150  -  total flux cleaned = -0.0061398 Jy
! Component: 200  -  total flux cleaned = -0.00659503 Jy
! Total flux subtracted in 200 components = -0.00659503 Jy
! Clean residual min=-0.007389 max=0.006505 Jy/beam
! Clean residual mean=-0.000001 rms=0.001683 Jy/beam
! Combined flux in latest and established models = 1.09974 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 1.09974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092258Jy  sigma=0.622845
! Fit after  self-cal, rms=0.092260Jy  sigma=0.622821
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000462451 Jy
! Component: 100  -  total flux cleaned = -0.000852869 Jy
! Component: 150  -  total flux cleaned = -0.00103455 Jy
! Component: 200  -  total flux cleaned = -0.00109126 Jy
! Total flux subtracted in 200 components = -0.00109126 Jy
! Clean residual min=-0.007239 max=0.006379 Jy/beam
! Clean residual mean=-0.000001 rms=0.001667 Jy/beam
! Combined flux in latest and established models = 1.09865 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 1.09865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092099Jy  sigma=0.622561
! Fit after  self-cal, rms=0.092085Jy  sigma=0.622537
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092085Jy  sigma=0.622537
! Fit after  self-cal, rms=0.091995Jy  sigma=0.621708
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8421 mas, bmaj=2.058 mas, bpa=-1.68 degrees
! Estimated noise=2.38347 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00342727 Jy
! Component: 100  -  total flux cleaned = -0.00510666 Jy
! Component: 150  -  total flux cleaned = -0.00563709 Jy
! Component: 200  -  total flux cleaned = -0.00605271 Jy
! Total flux subtracted in 200 components = -0.00605271 Jy
! Clean residual min=-0.007046 max=0.006206 Jy/beam
! Clean residual mean=-0.000001 rms=0.001619 Jy/beam
! Combined flux in latest and established models = 1.09259 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 69 components and 1.09259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091639Jy  sigma=0.621675
! Fit after  self-cal, rms=0.091639Jy  sigma=0.621658
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000364175 Jy
! Component: 100  -  total flux cleaned = -0.000469555 Jy
! Component: 150  -  total flux cleaned = -0.000469502 Jy
! Component: 200  -  total flux cleaned = -0.000470565 Jy
! Total flux subtracted in 200 components = -0.000470565 Jy
! Clean residual min=-0.007003 max=0.006148 Jy/beam
! Clean residual mean=-0.000001 rms=0.001605 Jy/beam
! Combined flux in latest and established models = 1.09212 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 1.09212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091542Jy  sigma=0.621444
! Fit after  self-cal, rms=0.091532Jy  sigma=0.621427
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091532Jy  sigma=0.621427
! Fit after  self-cal, rms=0.091444Jy  sigma=0.620707
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.816 mas, bmaj=2.902 mas, bpa=-6.092 degrees
! Estimated noise=2.81042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00140019 Jy
! Component: 100  -  total flux cleaned = -0.00151825 Jy
! Component: 150  -  total flux cleaned = -0.00133378 Jy
! Component: 200  -  total flux cleaned = -0.00123641 Jy
! Total flux subtracted in 200 components = -0.00123641 Jy
! Clean residual min=-0.009855 max=0.007968 Jy/beam
! Clean residual mean=-0.000004 rms=0.002204 Jy/beam
! Combined flux in latest and established models = 1.09089 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 1.09089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091225Jy  sigma=0.621289
! Fit after  self-cal, rms=0.091226Jy  sigma=0.621188
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187646 Jy
! Component: 100  -  total flux cleaned = 0.000407572 Jy
! Component: 150  -  total flux cleaned = 0.000409953 Jy
! Component: 200  -  total flux cleaned = 0.000409367 Jy
! Total flux subtracted in 200 components = 0.000409367 Jy
! Clean residual min=-0.009905 max=0.007692 Jy/beam
! Clean residual mean=-0.000004 rms=0.002172 Jy/beam
! Combined flux in latest and established models = 1.0913 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 90 components and 1.0913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091245Jy  sigma=0.621428
! Fit after  self-cal, rms=0.091231Jy  sigma=0.621397
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8424 mas, bmaj=2.058 mas, bpa=-1.631 degrees
! Estimated noise=2.37527 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8424 x 2.058 at -1.631 degrees (North through East)
! Clean map  min=-0.0064986  max=0.89386 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091231Jy  sigma=0.621397
! Fit after  self-cal, rms=0.083795Jy  sigma=0.551323
! Inverting map and beam 
! Estimated beam: bmin=0.8424 mas, bmaj=2.06 mas, bpa=-1.677 degrees
! Estimated noise=2.36823 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00308488 Jy
! Component: 100  -  total flux cleaned = -0.00466958 Jy
! Component: 150  -  total flux cleaned = -0.00535436 Jy
! Component: 200  -  total flux cleaned = -0.00590494 Jy
! Total flux subtracted in 200 components = -0.00590494 Jy
! Clean residual min=-0.006331 max=0.006210 Jy/beam
! Clean residual mean=-0.000000 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 1.08539 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 97 components and 1.08539 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083500Jy  sigma=0.550828
! Fit after  self-cal, rms=0.083508Jy  sigma=0.550802
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000591748 Jy
! Component: 100  -  total flux cleaned = -0.00100812 Jy
! Component: 150  -  total flux cleaned = -0.00120301 Jy
! Component: 200  -  total flux cleaned = -0.00143228 Jy
! Total flux subtracted in 200 components = -0.00143228 Jy
! Clean residual min=-0.006344 max=0.006122 Jy/beam
! Clean residual mean=-0.000000 rms=0.001507 Jy/beam
! Combined flux in latest and established models = 1.08396 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 98 components and 1.08396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083399Jy  sigma=0.550613
! Fit after  self-cal, rms=0.083397Jy  sigma=0.550606
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083397Jy  sigma=0.550606
! Fit after  self-cal, rms=0.083316Jy  sigma=0.550182
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7716 mas, bmaj=1.952 mas, bpa=-1.542 degrees
! Estimated noise=3.4161 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.696602 Jy
! Component: 100  -  total flux cleaned = 0.891665 Jy
! Component: 150  -  total flux cleaned = 0.968674 Jy
! Component: 200  -  total flux cleaned = 1.0092 Jy
! Total flux subtracted in 200 components = 1.0092 Jy
! Clean residual min=-0.012620 max=0.020413 Jy/beam
! Clean residual mean=-0.000003 rms=0.003761 Jy/beam
! Combined flux in latest and established models = 1.00919 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 1.00919 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8427 mas, bmaj=2.059 mas, bpa=-1.636 degrees
! Estimated noise=2.36287 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.02547 Jy
! Component: 100  -  total flux cleaned = 0.0399934 Jy
! Component: 150  -  total flux cleaned = 0.0488674 Jy
! Component: 200  -  total flux cleaned = 0.0549461 Jy
! Total flux subtracted in 200 components = 0.0549461 Jy
! Clean residual min=-0.006678 max=0.006133 Jy/beam
! Clean residual mean=-0.000000 rms=0.001671 Jy/beam
! Combined flux in latest and established models = 1.06414 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 33 components and 1.06414 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.816 mas, bmaj=2.905 mas, bpa=-6.107 degrees
! Estimated noise=2.79352 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00650598 Jy
! Component: 100  -  total flux cleaned = 0.00989716 Jy
! Component: 150  -  total flux cleaned = 0.0120536 Jy
! Component: 200  -  total flux cleaned = 0.0135062 Jy
! Total flux subtracted in 200 components = 0.0135062 Jy
! Clean residual min=-0.009833 max=0.007128 Jy/beam
! Clean residual mean=-0.000001 rms=0.002059 Jy/beam
! Combined flux in latest and established models = 1.07765 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000758297 Jy
! Component: 100  -  total flux cleaned = 0.00113048 Jy
! Component: 150  -  total flux cleaned = 0.00136662 Jy
! Component: 200  -  total flux cleaned = 0.00152449 Jy
! Total flux subtracted in 200 components = 0.00152449 Jy
! Clean residual min=-0.009633 max=0.007057 Jy/beam
! Clean residual mean=-0.000001 rms=0.002025 Jy/beam
! Combined flux in latest and established models = 1.07917 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 55 components and 1.07917 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8427 mas, bmaj=2.059 mas, bpa=-1.636 degrees
! Estimated noise=2.36287 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00200208 Jy
! Component: 100  -  total flux cleaned = -0.00249504 Jy
! Component: 150  -  total flux cleaned = -0.00270627 Jy
! Component: 200  -  total flux cleaned = -0.00270494 Jy
! Total flux subtracted in 200 components = -0.00270494 Jy
! Clean residual min=-0.006296 max=0.005827 Jy/beam
! Clean residual mean=-0.000000 rms=0.001510 Jy/beam
! Combined flux in latest and established models = 1.07647 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 65 components and 1.07647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083618Jy  sigma=0.551053
! Fit after  self-cal, rms=0.083584Jy  sigma=0.550890
wmodel /g0/scr/pima/npcsa_uvs/J1540+1447_X_map.mod
! Writing 65 model components to file: /g0/scr/pima/npcsa_uvs/J1540+1447_X_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1540+1447_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1540+1447_X_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1540+1447_X_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J1540+1447_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000935513 Jy
! Component: 100  -  total flux cleaned = -0.00133038 Jy
! Component: 150  -  total flux cleaned = -0.000960608 Jy
! Component: 200  -  total flux cleaned = -0.000610585 Jy
! Component: 250  -  total flux cleaned = -0.000360652 Jy
! Component: 300  -  total flux cleaned = 0.000114728 Jy
! Component: 350  -  total flux cleaned = 0.000644407 Jy
! Component: 400  -  total flux cleaned = 0.00137233 Jy
! Component: 450  -  total flux cleaned = 0.00200391 Jy
! Component: 500  -  total flux cleaned = 0.00288454 Jy
! Component: 550  -  total flux cleaned = 0.0032139 Jy
! Component: 600  -  total flux cleaned = 0.00359986 Jy
! Component: 650  -  total flux cleaned = 0.0043474 Jy
! Component: 700  -  total flux cleaned = 0.00483287 Jy
! Component: 750  -  total flux cleaned = 0.00553971 Jy
! Component: 800  -  total flux cleaned = 0.00588481 Jy
! Component: 850  -  total flux cleaned = 0.00666934 Jy
! Component: 900  -  total flux cleaned = 0.00694287 Jy
! Component: 950  -  total flux cleaned = 0.00742309 Jy
! Component: 1000  -  total flux cleaned = 0.00783756 Jy
! Component: 1050  -  total flux cleaned = 0.00804037 Jy
! Component: 1100  -  total flux cleaned = 0.00848893 Jy
! Component: 1150  -  total flux cleaned = 0.00878062 Jy
! Component: 1200  -  total flux cleaned = 0.00901907 Jy
! Component: 1250  -  total flux cleaned = 0.00934622 Jy
! Component: 1300  -  total flux cleaned = 0.00943715 Jy
! Component: 1350  -  total flux cleaned = 0.00961768 Jy
! Component: 1400  -  total flux cleaned = 0.00975133 Jy
! Component: 1450  -  total flux cleaned = 0.00988176 Jy
! Component: 1500  -  total flux cleaned = 0.0100104 Jy
! Component: 1550  -  total flux cleaned = 0.0100109 Jy
! Component: 1600  -  total flux cleaned = 0.0100941 Jy
! Component: 1650  -  total flux cleaned = 0.0101756 Jy
! Component: 1700  -  total flux cleaned = 0.0102156 Jy
! Component: 1750  -  total flux cleaned = 0.0100974 Jy
! Component: 1800  -  total flux cleaned = 0.0101755 Jy
! Component: 1850  -  total flux cleaned = 0.0102521 Jy
! Component: 1900  -  total flux cleaned = 0.010364 Jy
! Component: 1950  -  total flux cleaned = 0.0103266 Jy
! Component: 2000  -  total flux cleaned = 0.0103264 Jy
! Component: 2050  -  total flux cleaned = 0.0103261 Jy
! Component: 2100  -  total flux cleaned = 0.0103617 Jy
! Component: 2150  -  total flux cleaned = 0.0105017 Jy
! Component: 2200  -  total flux cleaned = 0.0105012 Jy
! Component: 2250  -  total flux cleaned = 0.0105021 Jy
! Component: 2300  -  total flux cleaned = 0.0105694 Jy
! Component: 2350  -  total flux cleaned = 0.010603 Jy
! Component: 2400  -  total flux cleaned = 0.0107017 Jy
! Component: 2450  -  total flux cleaned = 0.0106365 Jy
! Component: 2500  -  total flux cleaned = 0.0105719 Jy
! Component: 2550  -  total flux cleaned = 0.0105723 Jy
! Component: 2600  -  total flux cleaned = 0.0104137 Jy
! Component: 2650  -  total flux cleaned = 0.010414 Jy
! Component: 2700  -  total flux cleaned = 0.0103207 Jy
! Component: 2750  -  total flux cleaned = 0.0103207 Jy
! Component: 2800  -  total flux cleaned = 0.010259 Jy
! Component: 2850  -  total flux cleaned = 0.0101983 Jy
! Component: 2900  -  total flux cleaned = 0.010138 Jy
! Component: 2950  -  total flux cleaned = 0.0101379 Jy
! Component: 3000  -  total flux cleaned = 0.0101082 Jy
! Component: 3050  -  total flux cleaned = 0.0100196 Jy
! Component: 3100  -  total flux cleaned = 0.0100199 Jy
! Component: 3150  -  total flux cleaned = 0.00996173 Jy
! Component: 3200  -  total flux cleaned = 0.00990377 Jy
! Component: 3250  -  total flux cleaned = 0.0098462 Jy
! Component: 3300  -  total flux cleaned = 0.00981758 Jy
! Component: 3350  -  total flux cleaned = 0.00976065 Jy
! Component: 3400  -  total flux cleaned = 0.00976064 Jy
! Component: 3450  -  total flux cleaned = 0.00973261 Jy
! Component: 3500  -  total flux cleaned = 0.00970446 Jy
! Component: 3550  -  total flux cleaned = 0.00973241 Jy
! Component: 3600  -  total flux cleaned = 0.00970458 Jy
! Component: 3650  -  total flux cleaned = 0.00975964 Jy
! Component: 3700  -  total flux cleaned = 0.00973209 Jy
! Component: 3750  -  total flux cleaned = 0.00975951 Jy
! Component: 3800  -  total flux cleaned = 0.00973217 Jy
! Component: 3850  -  total flux cleaned = 0.00978678 Jy
! Component: 3900  -  total flux cleaned = 0.00975963 Jy
! Component: 3950  -  total flux cleaned = 0.00970546 Jy
! Component: 4000  -  total flux cleaned = 0.00967842 Jy
! Component: 4050  -  total flux cleaned = 0.0096784 Jy
! Total flux subtracted in 4096 components = 0.00962457 Jy
! Clean residual min=-0.001557 max=0.001728 Jy/beam
! Clean residual mean=0.000000 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 1.08609 Jy
keep
! Adding 268 model components to the UV plane model.
! The established model now contains 333 components and 1.08609 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1540+1447_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8427 x 2.059 at -1.636 degrees (North through East)
! Clean map  min=-0.0034808  max=0.89025 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1540+1447_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.890249 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000429096 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.144599 0.144599 0.289197 0.578395 1.15679 2.31358 4.62716 9.25432 18.5086 37.0173 74.0345
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.89 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1540+1447_X_uvs.log closed on Sun Oct  6 10:29:14 2013