! Started logfile: /g0/scr/pima/npcsa_uvs/J1435+7605_S_uvs.log on Sun Oct 6 10:34:08 2013 obs /g0/scr/pima/npcsa_uvs/J1435+7605_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1435+7605_S_uva.fits ! AN table 1: 53 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.959644 visibilities/baseline/integration-bin. ! Found source: J1435+7605 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7324 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1435+7605_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.086660Jy sigma=3.068324 ! Fit after self-cal, rms=0.801537Jy sigma=1.189381 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.617 mas, bmaj=11.34 mas, bpa=-0.6713 degrees ! Estimated noise=10.8635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.260883 Jy ! Component: 100 - total flux cleaned = 0.396342 Jy ! Total flux subtracted in 100 components = 0.396342 Jy ! Clean residual min=-0.055390 max=0.074103 Jy/beam ! Clean residual mean=-0.000174 rms=0.022630 Jy/beam ! Combined flux in latest and established models = 0.396342 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.396342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199735Jy sigma=0.782193 ! Fit after self-cal, rms=0.197804Jy sigma=0.780442 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.764 mas, bmaj=12.04 mas, bpa=-0.01082 degrees ! Estimated noise=4.40701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160018 Jy ! Component: 100 - total flux cleaned = 0.250159 Jy ! Component: 150 - total flux cleaned = 0.280773 Jy ! Component: 200 - total flux cleaned = 0.297645 Jy ! Total flux subtracted in 200 components = 0.297645 Jy ! Clean residual min=-0.023859 max=0.024030 Jy/beam ! Clean residual mean=-0.000073 rms=0.009876 Jy/beam ! Combined flux in latest and established models = 0.693987 Jy ! Performing phase self-cal ! Adding 130 model components to the UV plane model. ! The established model now contains 168 components and 0.693987 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134609Jy sigma=0.329857 ! Fit after self-cal, rms=0.131561Jy sigma=0.327344 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 0.93 KP 0.95 ! LA 1.03 MK 0.87 NL 1.21 OV 1.00 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 0.94 KP 0.98 ! LA 0.99 MK 1.02 NL 0.99 OV 1.01 ! SC 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.98 HN 0.91 KP 0.98 ! LA 0.86 MK 0.91 NL 0.91 OV 1.09 ! SC 1.14 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.45 FD 1.00 HN 0.93 KP 0.90 ! LA 0.75 MK 0.98 NL 0.87 OV 0.93 ! SC 1.10 ! ! ! Fit before self-cal, rms=0.131561Jy sigma=0.327344 ! Fit after self-cal, rms=0.116691Jy sigma=0.236534 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.783 mas, bmaj=12.07 mas, bpa=-0.1495 degrees ! Estimated noise=4.0958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164593 Jy ! Component: 100 - total flux cleaned = 0.00545377 Jy ! Component: 150 - total flux cleaned = 0.00867387 Jy ! Component: 200 - total flux cleaned = 0.011022 Jy ! Total flux subtracted in 200 components = 0.011022 Jy ! Clean residual min=-0.007342 max=0.007341 Jy/beam ! Clean residual mean=-0.000014 rms=0.002593 Jy/beam ! Combined flux in latest and established models = 0.705009 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 233 components and 0.70501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108116Jy sigma=0.223681 ! Fit after self-cal, rms=0.107838Jy sigma=0.223092 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107838Jy sigma=0.223092 ! Fit after self-cal, rms=0.105617Jy sigma=0.221942 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.737 mas, bmaj=12.03 mas, bpa=-0.27 degrees ! Estimated noise=3.9713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00989074 Jy ! Component: 100 - total flux cleaned = -0.0111295 Jy ! Component: 150 - total flux cleaned = -0.0107855 Jy ! Component: 200 - total flux cleaned = -0.0101533 Jy ! Total flux subtracted in 200 components = -0.0101533 Jy ! Clean residual min=-0.005162 max=0.005173 Jy/beam ! Clean residual mean=-0.000011 rms=0.001846 Jy/beam ! Combined flux in latest and established models = 0.694856 Jy selfcal ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 276 components and 0.694856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099976Jy sigma=0.218622 ! Fit after self-cal, rms=0.099720Jy sigma=0.218455 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00120843 Jy ! Component: 100 - total flux cleaned = -0.000930314 Jy ! Component: 150 - total flux cleaned = -0.000931918 Jy ! Component: 200 - total flux cleaned = -0.000434864 Jy ! Total flux subtracted in 200 components = -0.000434864 Jy ! Clean residual min=-0.003980 max=0.003986 Jy/beam ! Clean residual mean=-0.000008 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.694421 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 323 components and 0.694422 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097581Jy sigma=0.216142 ! Fit after self-cal, rms=0.097453Jy sigma=0.216083 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097453Jy sigma=0.216083 ! Fit after self-cal, rms=0.095201Jy sigma=0.214843 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=11.98 mas, bpa=-0.325 degrees ! Estimated noise=3.84037 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00795211 Jy ! Component: 100 - total flux cleaned = -0.00819002 Jy ! Component: 150 - total flux cleaned = -0.00861139 Jy ! Component: 200 - total flux cleaned = -0.0089897 Jy ! Total flux subtracted in 200 components = -0.0089897 Jy ! Clean residual min=-0.003141 max=0.003132 Jy/beam ! Clean residual mean=-0.000007 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 0.685432 Jy selfcal ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 370 components and 0.685432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091774Jy sigma=0.214458 ! Fit after self-cal, rms=0.091684Jy sigma=0.214403 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111408 Jy ! Component: 100 - total flux cleaned = -0.00146297 Jy ! Component: 150 - total flux cleaned = -0.00247116 Jy ! Component: 200 - total flux cleaned = -0.00359188 Jy ! Total flux subtracted in 200 components = -0.00359188 Jy ! Clean residual min=-0.002607 max=0.002592 Jy/beam ! Clean residual mean=-0.000006 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.68184 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 413 components and 0.68184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090689Jy sigma=0.213488 ! Fit after self-cal, rms=0.090645Jy sigma=0.213469 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090645Jy sigma=0.213469 ! Fit after self-cal, rms=0.088867Jy sigma=0.212388 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.247 mas, bmaj=13.67 mas, bpa=9.728 degrees ! Estimated noise=3.30724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00562236 Jy ! Component: 100 - total flux cleaned = -0.00531544 Jy ! Component: 150 - total flux cleaned = -0.00558971 Jy ! Component: 200 - total flux cleaned = -0.00558921 Jy ! Total flux subtracted in 200 components = -0.00558921 Jy ! Clean residual min=-0.001927 max=0.001916 Jy/beam ! Clean residual mean=-0.000008 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.67625 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 439 components and 0.67625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086782Jy sigma=0.212691 ! Fit after self-cal, rms=0.086739Jy sigma=0.212652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108349 Jy ! Component: 100 - total flux cleaned = -0.00140365 Jy ! Component: 150 - total flux cleaned = -0.00139768 Jy ! Component: 200 - total flux cleaned = -0.00157843 Jy ! Total flux subtracted in 200 components = -0.00157843 Jy ! Clean residual min=-0.001468 max=0.001470 Jy/beam ! Clean residual mean=-0.000007 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.674672 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 460 components and 0.674672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086339Jy sigma=0.212459 ! Fit after self-cal, rms=0.086326Jy sigma=0.212447 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=11.95 mas, bpa=-0.3491 degrees ! Estimated noise=3.7259 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.633 x 11.95 at -0.3491 degrees (North through East) ! Clean map min=-0.011616 max=0.24322 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.544 mas, bmaj=11.28 mas, bpa=-0.8514 degrees ! Estimated noise=8.98286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.219147 Jy ! Component: 100 - total flux cleaned = 0.341544 Jy ! Component: 150 - total flux cleaned = 0.427436 Jy ! Component: 200 - total flux cleaned = 0.48979 Jy ! Total flux subtracted in 200 components = 0.48979 Jy ! Clean residual min=-0.033093 max=0.035818 Jy/beam ! Clean residual mean=-0.000095 rms=0.011708 Jy/beam ! Combined flux in latest and established models = 0.48979 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 82 model components to the UV plane model. ! The established model now contains 82 components and 0.48979 Jy ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=11.95 mas, bpa=-0.3491 degrees ! Estimated noise=3.7259 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0846397 Jy ! Component: 100 - total flux cleaned = 0.124178 Jy ! Component: 150 - total flux cleaned = 0.132798 Jy ! Component: 200 - total flux cleaned = 0.14021 Jy ! Total flux subtracted in 200 components = 0.14021 Jy ! Clean residual min=-0.015170 max=0.015171 Jy/beam ! Clean residual mean=-0.000049 rms=0.005915 Jy/beam ! Combined flux in latest and established models = 0.63 Jy ! Adding 122 model components to the UV plane model. ! The established model now contains 198 components and 0.630001 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.247 mas, bmaj=13.67 mas, bpa=9.728 degrees ! Estimated noise=3.30724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00884476 Jy ! Component: 100 - total flux cleaned = 0.00807574 Jy ! Component: 150 - total flux cleaned = 0.0116376 Jy ! Component: 200 - total flux cleaned = 0.0107944 Jy ! Total flux subtracted in 200 components = 0.0107944 Jy ! Clean residual min=-0.006038 max=0.006057 Jy/beam ! Clean residual mean=-0.000033 rms=0.002506 Jy/beam ! Combined flux in latest and established models = 0.640795 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00301937 Jy ! Component: 100 - total flux cleaned = -0.00479748 Jy ! Component: 150 - total flux cleaned = -0.00585927 Jy ! Component: 200 - total flux cleaned = -0.00389849 Jy ! Total flux subtracted in 200 components = -0.00389849 Jy ! Clean residual min=-0.003927 max=0.003916 Jy/beam ! Clean residual mean=-0.000026 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.636896 Jy ! Adding 136 model components to the UV plane model. ! The established model now contains 331 components and 0.636896 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.633 mas, bmaj=11.95 mas, bpa=-0.3491 degrees ! Estimated noise=3.7259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00407805 Jy ! Component: 100 - total flux cleaned = -0.00490032 Jy ! Component: 150 - total flux cleaned = -0.00538873 Jy ! Component: 200 - total flux cleaned = -0.00516047 Jy ! Total flux subtracted in 200 components = -0.00516047 Jy ! Clean residual min=-0.003655 max=0.003631 Jy/beam ! Clean residual mean=-0.000007 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.631736 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 387 components and 0.631735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088155Jy sigma=0.215416 ! Fit after self-cal, rms=0.088022Jy sigma=0.215012 wmodel /g0/scr/pima/npcsa_uvs/J1435+7605_S_map.mod ! Writing 387 model components to file: /g0/scr/pima/npcsa_uvs/J1435+7605_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J1435+7605_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1435+7605_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1435+7605_S_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: /home/lpetrov/bin/01_muppet] ! wmap "/g0/scr/pima/npcsa_uvs/J1435+7605_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.633 x 11.95 at -0.3491 degrees (North through East) ! Clean map min=-0.011044 max=0.22836 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1435+7605_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.228364 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00110419 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.45057 1.45057 2.90113 5.80227 11.6045 23.2091 46.4181 92.8362 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0033 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.228 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1435+7605_S_uvs.log closed on Sun Oct 6 10:34:11 2013