! Started logfile: /g0/scr/pima/npcsa_uvs/J1344+7907_X_uvs.log on Sun Oct 6 10:28:53 2013 obs /g0/scr/pima/npcsa_uvs/J1344+7907_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1344+7907_X_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.422222 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1344+7907 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4180 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1344+7907_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.576374Jy sigma=5.118890 ! Fit after self-cal, rms=1.556943Jy sigma=5.196129 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8844 mas, bmaj=2.81 mas, bpa=6.113 degrees ! Estimated noise=41.8655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.061614 Jy ! Component: 100 - total flux cleaned = 0.0650204 Jy ! Total flux subtracted in 100 components = 0.0650204 Jy ! Clean residual min=-0.057956 max=0.057714 Jy/beam ! Clean residual mean=0.000001 rms=0.033750 Jy/beam ! Combined flux in latest and established models = 0.0650204 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 68 components and 0.0650204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.263136Jy sigma=5.254188 ! Fit after self-cal, rms=1.262886Jy sigma=5.254167 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.257 mas, bmaj=3.225 mas, bpa=2.924 degrees ! Estimated noise=16.9529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0135684 Jy ! Component: 100 - total flux cleaned = 0.000336153 Jy ! Component: 150 - total flux cleaned = 0.000539345 Jy ! Component: 200 - total flux cleaned = -0.0228908 Jy ! Total flux subtracted in 200 components = -0.0228908 Jy ! Clean residual min=-0.182596 max=0.184189 Jy/beam ! Clean residual mean=0.000079 rms=0.105474 Jy/beam ! Combined flux in latest and established models = 0.0421296 Jy ! Performing phase self-cal ! Adding 127 model components to the UV plane model. ! The established model now contains 182 components and 0.0421296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.258988Jy sigma=5.093809 ! Fit after self-cal, rms=1.258313Jy sigma=5.093699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.37 FD 1.59 HN 2.22 KP 0.83 ! LA 1.33 MK 0.57 NL 0.62 OV 0.37 ! PT 1.82 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.28 FD 2.15 HN 2.82 KP 0.82 ! LA 1.24 MK 0.55 NL 0.74 OV 0.28 ! PT 2.40 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.28 FD 2.36 HN 2.54 KP 0.60 ! LA 2.11 MK 0.35 NL 1.11 OV 0.28 ! PT 2.27 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.30 FD 2.28 HN 2.84 KP 0.82 ! LA 2.80 MK 0.28 NL 0.79 OV 0.30 ! PT 2.81 SC 1.00* ! ! ! Fit before self-cal, rms=1.258313Jy sigma=5.093699 ! Fit after self-cal, rms=0.373775Jy sigma=4.010962 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.48 mas, bmaj=2.995 mas, bpa=8.278 degrees ! Estimated noise=10.8856 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0966391 Jy ! Component: 100 - total flux cleaned = 0.110058 Jy ! Component: 150 - total flux cleaned = 0.0939315 Jy ! Component: 200 - total flux cleaned = 0.0893367 Jy ! Total flux subtracted in 200 components = 0.0893367 Jy ! Clean residual min=-0.054843 max=0.054922 Jy/beam ! Clean residual mean=0.000008 rms=0.024188 Jy/beam ! Combined flux in latest and established models = 0.131466 Jy ! Performing phase self-cal ! Adding 160 model components to the UV plane model. ! The established model now contains 340 components and 0.131466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.236600Jy sigma=4.443581 ! Fit after self-cal, rms=0.239400Jy sigma=4.443481 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239400Jy sigma=4.443481 ! Fit after self-cal, rms=0.244825Jy sigma=3.754599 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.803 mas, bmaj=2.834 mas, bpa=9.261 degrees ! Estimated noise=5.48363 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0267765 Jy ! Component: 100 - total flux cleaned = -0.0245713 Jy ! Component: 150 - total flux cleaned = -0.0358417 Jy ! Component: 200 - total flux cleaned = -0.0375803 Jy ! Total flux subtracted in 200 components = -0.0375803 Jy ! Clean residual min=-0.009168 max=0.009090 Jy/beam ! Clean residual mean=-0.000006 rms=0.004019 Jy/beam ! Combined flux in latest and established models = 0.0938859 Jy selfcal ! Performing phase self-cal ! Adding 154 model components to the UV plane model. ! The established model now contains 473 components and 0.0938859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225647Jy sigma=4.196500 ! Fit after self-cal, rms=0.230045Jy sigma=4.195440 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00214264 Jy ! Component: 100 - total flux cleaned = -0.00450747 Jy ! Component: 150 - total flux cleaned = -0.00652338 Jy ! Component: 200 - total flux cleaned = -0.00760045 Jy ! Total flux subtracted in 200 components = -0.00760045 Jy ! Clean residual min=-0.005735 max=0.005689 Jy/beam ! Clean residual mean=-0.000005 rms=0.002819 Jy/beam ! Combined flux in latest and established models = 0.0862855 Jy ! Performing phase self-cal ! Adding 127 model components to the UV plane model. ! The established model now contains 600 components and 0.0862855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229741Jy sigma=4.239426 ! Fit after self-cal, rms=0.228632Jy sigma=4.238949 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228632Jy sigma=4.238949 ! Fit after self-cal, rms=0.238394Jy sigma=3.652869 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.203 mas, bmaj=2.742 mas, bpa=11.42 degrees ! Estimated noise=2.85391 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00732749 Jy ! Component: 100 - total flux cleaned = -0.00177986 Jy ! Component: 150 - total flux cleaned = 0.00255219 Jy ! Component: 200 - total flux cleaned = 0.00447632 Jy ! Total flux subtracted in 200 components = 0.00447632 Jy ! Clean residual min=-0.009941 max=0.009938 Jy/beam ! Clean residual mean=-0.000013 rms=0.004491 Jy/beam ! Combined flux in latest and established models = 0.0907618 Jy selfcal ! Performing phase self-cal ! Adding 169 model components to the UV plane model. ! The established model now contains 765 components and 0.0907619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235742Jy sigma=3.980738 ! Fit after self-cal, rms=0.238713Jy sigma=3.980541 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00597296 Jy ! Component: 100 - total flux cleaned = -0.00323239 Jy ! Component: 150 - total flux cleaned = -0.00240569 Jy ! Component: 200 - total flux cleaned = -6.98562e-05 Jy ! Total flux subtracted in 200 components = -6.98562e-05 Jy ! Clean residual min=-0.012698 max=0.012661 Jy/beam ! Clean residual mean=-0.000009 rms=0.006971 Jy/beam ! Combined flux in latest and established models = 0.090692 Jy ! Performing phase self-cal ! Adding 105 model components to the UV plane model. ! The established model now contains 849 components and 0.090692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238592Jy sigma=3.984740 ! Fit after self-cal, rms=0.240100Jy sigma=3.984629 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240100Jy sigma=3.984629 ! Fit after self-cal, rms=0.246470Jy sigma=3.734813 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.679 mas, bmaj=5.134 mas, bpa=-85.21 degrees ! Estimated noise=1.7843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00459018 Jy ! Component: 100 - total flux cleaned = -0.00862186 Jy ! Component: 150 - total flux cleaned = -0.00700547 Jy ! Component: 200 - total flux cleaned = -0.00657482 Jy ! Total flux subtracted in 200 components = -0.00657482 Jy ! Clean residual min=-0.007675 max=0.007685 Jy/beam ! Clean residual mean=-0.000011 rms=0.003529 Jy/beam ! Combined flux in latest and established models = 0.0841172 Jy selfcal ! Performing phase self-cal ! Adding 177 model components to the UV plane model. ! The established model now contains 1011 components and 0.0841172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245595Jy sigma=4.013462 ! Fit after self-cal, rms=0.244582Jy sigma=4.013404 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00440837 Jy ! Component: 100 - total flux cleaned = -0.00305977 Jy ! Component: 150 - total flux cleaned = -0.00248218 Jy ! Component: 200 - total flux cleaned = -0.00481159 Jy ! Total flux subtracted in 200 components = -0.00481159 Jy ! Clean residual min=-0.009893 max=0.009851 Jy/beam ! Clean residual mean=-0.000011 rms=0.005413 Jy/beam ! Combined flux in latest and established models = 0.0793056 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 1041 components and 0.0793055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245125Jy sigma=4.026718 ! Fit after self-cal, rms=0.248504Jy sigma=4.026563 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=2.717 mas, bpa=22.71 degrees ! Estimated noise=1.95061 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.502 x 2.717 at 22.71 degrees (North through East) ! Clean map min=-0.099943 max=0.10112 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.418 mas, bmaj=2.813 mas, bpa=11.51 degrees ! Estimated noise=8.12027 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187927 Jy ! Component: 100 - total flux cleaned = 0.0194263 Jy ! Component: 150 - total flux cleaned = 0.0211871 Jy ! Component: 200 - total flux cleaned = 0.0225191 Jy ! Total flux subtracted in 200 components = 0.0225191 Jy ! Clean residual min=-0.004164 max=0.004171 Jy/beam ! Clean residual mean=0.000004 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.0225191 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0225191 Jy ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=2.717 mas, bpa=22.71 degrees ! Estimated noise=1.95061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0158852 Jy ! Component: 100 - total flux cleaned = 0.0255643 Jy ! Component: 150 - total flux cleaned = 0.0336869 Jy ! Component: 200 - total flux cleaned = 0.0401826 Jy ! Total flux subtracted in 200 components = 0.0401826 Jy ! Clean residual min=-0.004287 max=0.004375 Jy/beam ! Clean residual mean=-0.000003 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.0627016 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 100 components and 0.0627016 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.679 mas, bmaj=5.134 mas, bpa=-85.21 degrees ! Estimated noise=1.7843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00726442 Jy ! Component: 100 - total flux cleaned = 0.0108415 Jy ! Component: 150 - total flux cleaned = 0.0134732 Jy ! Component: 200 - total flux cleaned = 0.0132272 Jy ! Total flux subtracted in 200 components = 0.0132272 Jy ! Clean residual min=-0.004309 max=0.004297 Jy/beam ! Clean residual mean=-0.000003 rms=0.001956 Jy/beam ! Combined flux in latest and established models = 0.0759288 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000785884 Jy ! Component: 100 - total flux cleaned = -0.000425467 Jy ! Component: 150 - total flux cleaned = -0.00177715 Jy ! Component: 200 - total flux cleaned = -0.00334083 Jy ! Total flux subtracted in 200 components = -0.00334083 Jy ! Clean residual min=-0.006682 max=0.006684 Jy/beam ! Clean residual mean=0.000002 rms=0.003014 Jy/beam ! Combined flux in latest and established models = 0.072588 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 204 components and 0.072588 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=2.717 mas, bpa=22.71 degrees ! Estimated noise=1.95061 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00721875 Jy ! Component: 100 - total flux cleaned = 0.0094617 Jy ! Component: 150 - total flux cleaned = 0.00914039 Jy ! Component: 200 - total flux cleaned = 0.0096431 Jy ! Total flux subtracted in 200 components = 0.0096431 Jy ! Clean residual min=-0.001633 max=0.001627 Jy/beam ! Clean residual mean=-0.000001 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0822311 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 259 components and 0.0822311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264224Jy sigma=4.414849 ! Fit after self-cal, rms=0.267433Jy sigma=4.414649 wmodel /g0/scr/pima/npcsa_uvs/J1344+7907_X_map.mod ! Writing 259 model components to file: /g0/scr/pima/npcsa_uvs/J1344+7907_X_map.mod wobs /g0/scr/pima/npcsa_uvs/J1344+7907_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1344+7907_X_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1344+7907_X_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: /home/lpetrov/bin/01_muppet] ! wmap "/g0/scr/pima/npcsa_uvs/J1344+7907_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.502 x 2.717 at 22.71 degrees (North through East) ! Clean map min=-0.0058601 max=0.029742 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1344+7907_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0297424 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000674297 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.80138 6.80138 13.6028 27.2055 54.411 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.029 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1344+7907_X_uvs.log closed on Sun Oct 6 10:28:56 2013