! Started logfile: /g0/scr/pima/npcsa_uvs/J1344+7907_S_uvs.log on Sun Oct  6 10:33:54 2013
obs /g0/scr/pima/npcsa_uvs/J1344+7907_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1344+7907_S_uva.fits
! AN table 1: 55 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.622222 visibilities/baseline/integration-bin.
! Found source: J1344+7907
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6160 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1344+7907_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.005418Jy  sigma=0.779962
! Fit after  self-cal, rms=0.947980Jy  sigma=0.691399
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.209 mas, bmaj=12.03 mas, bpa=2.3 degrees
! Estimated noise=25.1544 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0684486 Jy
! Component: 100  -  total flux cleaned = 0.0822535 Jy
! Total flux subtracted in 100 components = 0.0822535 Jy
! Clean residual min=-0.009803 max=0.009551 Jy/beam
! Clean residual mean=0.000005 rms=0.002598 Jy/beam
! Combined flux in latest and established models = 0.0822535 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0822535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093250Jy  sigma=0.075757
! Fit after  self-cal, rms=0.090555Jy  sigma=0.073880
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.954 mas, bmaj=12.47 mas, bpa=3.459 degrees
! Estimated noise=13.2263 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00654089 Jy
! Component: 100  -  total flux cleaned = 0.00849567 Jy
! Component: 150  -  total flux cleaned = 0.00892116 Jy
! Component: 200  -  total flux cleaned = 0.00928264 Jy
! Total flux subtracted in 200 components = 0.00928264 Jy
! Clean residual min=-0.009508 max=0.005518 Jy/beam
! Clean residual mean=0.000009 rms=0.002029 Jy/beam
! Combined flux in latest and established models = 0.0915361 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.0915361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091651Jy  sigma=0.072470
! Fit after  self-cal, rms=0.091538Jy  sigma=0.072424
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.93     HN        0.80     KP        0.88     
!   LA        0.88     MK        0.77     NL        0.93     OV        0.98     
!   PT        0.96     SC        0.71     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.98     HN        0.87     KP        0.86     
!   LA        0.73     MK        0.83     NL        1.00     OV        0.94     
!   PT        0.93     SC        0.73     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.90     HN        0.80     KP        0.91     
!   LA        0.63     MK        0.92     NL        1.11     OV        0.99     
!   PT        1.02     SC        0.81     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.00     HN        0.75     KP        0.85     
!   LA        0.48     MK        0.89     NL        1.01     OV        0.76     
!   PT        1.10     SC        0.76     
! 
! 
! Fit before self-cal, rms=0.091538Jy  sigma=0.072424
! Fit after  self-cal, rms=0.078729Jy  sigma=0.067329
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.91 mas, bmaj=12.71 mas, bpa=3.052 degrees
! Estimated noise=10.3125 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.01423 Jy
! Component: 100  -  total flux cleaned = -0.0178027 Jy
! Component: 150  -  total flux cleaned = -0.019291 Jy
! Component: 200  -  total flux cleaned = -0.019923 Jy
! Total flux subtracted in 200 components = -0.019923 Jy
! Clean residual min=-0.002662 max=0.003037 Jy/beam
! Clean residual mean=0.000004 rms=0.000769 Jy/beam
! Combined flux in latest and established models = 0.0716131 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 53 components and 0.0716131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071511Jy  sigma=0.069761
! Fit after  self-cal, rms=0.071685Jy  sigma=0.069529
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071685Jy  sigma=0.069529
! Fit after  self-cal, rms=0.062953Jy  sigma=0.066964
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.913 mas, bmaj=12.75 mas, bpa=2.993 degrees
! Estimated noise=8.18785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0112217 Jy
! Component: 100  -  total flux cleaned = -0.0139202 Jy
! Component: 150  -  total flux cleaned = -0.015001 Jy
! Component: 200  -  total flux cleaned = -0.0155312 Jy
! Total flux subtracted in 200 components = -0.0155312 Jy
! Clean residual min=-0.002166 max=0.002336 Jy/beam
! Clean residual mean=0.000003 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.056082 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 61 components and 0.056082 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057319Jy  sigma=0.069415
! Fit after  self-cal, rms=0.057346Jy  sigma=0.069390
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000336732 Jy
! Component: 100  -  total flux cleaned = -0.000422269 Jy
! Component: 150  -  total flux cleaned = -0.000443169 Jy
! Component: 200  -  total flux cleaned = -0.000443105 Jy
! Total flux subtracted in 200 components = -0.000443105 Jy
! Clean residual min=-0.002134 max=0.002330 Jy/beam
! Clean residual mean=0.000004 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.0556389 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 74 components and 0.0556389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057275Jy  sigma=0.069470
! Fit after  self-cal, rms=0.057247Jy  sigma=0.069455
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057247Jy  sigma=0.069455
! Fit after  self-cal, rms=0.049698Jy  sigma=0.066881
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.93 mas, bmaj=12.77 mas, bpa=2.98 degrees
! Estimated noise=6.45894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0088539 Jy
! Component: 100  -  total flux cleaned = -0.0109357 Jy
! Component: 150  -  total flux cleaned = -0.0117105 Jy
! Component: 200  -  total flux cleaned = -0.0120819 Jy
! Total flux subtracted in 200 components = -0.0120819 Jy
! Clean residual min=-0.001628 max=0.001847 Jy/beam
! Clean residual mean=0.000003 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.0435569 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.0435569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045251Jy  sigma=0.069353
! Fit after  self-cal, rms=0.045255Jy  sigma=0.069349
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000157911 Jy
! Component: 100  -  total flux cleaned = -0.000194861 Jy
! Component: 150  -  total flux cleaned = -0.000202764 Jy
! Component: 200  -  total flux cleaned = -0.000209676 Jy
! Total flux subtracted in 200 components = -0.000209676 Jy
! Clean residual min=-0.001616 max=0.001806 Jy/beam
! Clean residual mean=0.000003 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.0433473 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 84 components and 0.0433473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045211Jy  sigma=0.069412
! Fit after  self-cal, rms=0.045210Jy  sigma=0.069410
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045210Jy  sigma=0.069410
! Fit after  self-cal, rms=0.039205Jy  sigma=0.066859
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.109 mas, bmaj=15.01 mas, bpa=1.639 degrees
! Estimated noise=6.48135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00697908 Jy
! Component: 100  -  total flux cleaned = -0.00858904 Jy
! Component: 150  -  total flux cleaned = -0.00903984 Jy
! Component: 200  -  total flux cleaned = -0.00906315 Jy
! Total flux subtracted in 200 components = -0.00906315 Jy
! Clean residual min=-0.001456 max=0.001913 Jy/beam
! Clean residual mean=0.000004 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.0342841 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 86 components and 0.0342841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035753Jy  sigma=0.069238
! Fit after  self-cal, rms=0.035750Jy  sigma=0.069230
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.25641e-05 Jy
! Component: 100  -  total flux cleaned = -2.88106e-05 Jy
! Component: 150  -  total flux cleaned = -5.30999e-06 Jy
! Component: 200  -  total flux cleaned = 1.05872e-05 Jy
! Total flux subtracted in 200 components = 1.05872e-05 Jy
! Clean residual min=-0.001472 max=0.001933 Jy/beam
! Clean residual mean=0.000004 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.0342947 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 87 components and 0.0342947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035715Jy  sigma=0.069296
! Fit after  self-cal, rms=0.035715Jy  sigma=0.069294
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=12.78 mas, bpa=2.989 degrees
! Estimated noise=5.09489 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.949 x 12.78 at 2.989 degrees (North through East)
! Clean map  min=-0.0011963  max=0.032683 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.181 mas, bmaj=12.21 mas, bpa=1.925 degrees
! Estimated noise=9.67334 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0271326 Jy
! Component: 100  -  total flux cleaned = 0.033306 Jy
! Component: 150  -  total flux cleaned = 0.0328086 Jy
! Component: 200  -  total flux cleaned = 0.0321192 Jy
! Total flux subtracted in 200 components = 0.0321192 Jy
! Clean residual min=-0.003035 max=0.002653 Jy/beam
! Clean residual mean=0.000002 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 0.0321192 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0321192 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=12.78 mas, bpa=2.989 degrees
! Estimated noise=5.09489 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000793208 Jy
! Component: 100  -  total flux cleaned = 0.00102311 Jy
! Component: 150  -  total flux cleaned = 0.00111951 Jy
! Component: 200  -  total flux cleaned = 0.00122415 Jy
! Total flux subtracted in 200 components = 0.00122415 Jy
! Clean residual min=-0.001416 max=0.001447 Jy/beam
! Clean residual mean=0.000002 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.0333434 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.0333434 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.109 mas, bmaj=15.01 mas, bpa=1.639 degrees
! Estimated noise=6.48135 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000624885 Jy
! Component: 100  -  total flux cleaned = 0.000721202 Jy
! Component: 150  -  total flux cleaned = 0.000783075 Jy
! Component: 200  -  total flux cleaned = 0.000823116 Jy
! Total flux subtracted in 200 components = 0.000823116 Jy
! Clean residual min=-0.001571 max=0.001877 Jy/beam
! Clean residual mean=0.000004 rms=0.000590 Jy/beam
! Combined flux in latest and established models = 0.0341665 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.65751e-05 Jy
! Component: 100  -  total flux cleaned = 8.60606e-05 Jy
! Component: 150  -  total flux cleaned = 0.000119507 Jy
! Component: 200  -  total flux cleaned = 0.000148141 Jy
! Total flux subtracted in 200 components = 0.000148141 Jy
! Clean residual min=-0.001473 max=0.001903 Jy/beam
! Clean residual mean=0.000004 rms=0.000582 Jy/beam
! Combined flux in latest and established models = 0.0343146 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 42 components and 0.0343147 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.949 mas, bmaj=12.78 mas, bpa=2.989 degrees
! Estimated noise=5.09489 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000256078 Jy
! Component: 100  -  total flux cleaned = -0.00029979 Jy
! Component: 150  -  total flux cleaned = -0.000310781 Jy
! Component: 200  -  total flux cleaned = -0.00032084 Jy
! Total flux subtracted in 200 components = -0.00032084 Jy
! Clean residual min=-0.001272 max=0.001429 Jy/beam
! Clean residual mean=0.000002 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.0339938 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 63 components and 0.0339938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035614Jy  sigma=0.069497
! Fit after  self-cal, rms=0.035612Jy  sigma=0.069487
wmodel /g0/scr/pima/npcsa_uvs/J1344+7907_S_map.mod
! Writing 63 model components to file: /g0/scr/pima/npcsa_uvs/J1344+7907_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1344+7907_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1344+7907_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1344+7907_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsa_uvs/J1344+7907_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000488363 Jy
! Component: 100  -  total flux cleaned = 0.000604383 Jy
! Component: 150  -  total flux cleaned = 0.000712868 Jy
! Component: 200  -  total flux cleaned = 0.000795262 Jy
! Component: 250  -  total flux cleaned = 0.000853027 Jy
! Component: 300  -  total flux cleaned = 0.000908351 Jy
! Component: 350  -  total flux cleaned = 0.00101445 Jy
! Component: 400  -  total flux cleaned = 0.00104859 Jy
! Component: 450  -  total flux cleaned = 0.00116473 Jy
! Component: 500  -  total flux cleaned = 0.00122898 Jy
! Component: 550  -  total flux cleaned = 0.00122909 Jy
! Component: 600  -  total flux cleaned = 0.00125967 Jy
! Component: 650  -  total flux cleaned = 0.00124467 Jy
! Component: 700  -  total flux cleaned = 0.00127338 Jy
! Component: 750  -  total flux cleaned = 0.00127276 Jy
! Component: 800  -  total flux cleaned = 0.00120318 Jy
! Component: 850  -  total flux cleaned = 0.00123059 Jy
! Component: 900  -  total flux cleaned = 0.00123067 Jy
! Component: 950  -  total flux cleaned = 0.00126937 Jy
! Component: 1000  -  total flux cleaned = 0.00124387 Jy
! Component: 1050  -  total flux cleaned = 0.00126878 Jy
! Component: 1100  -  total flux cleaned = 0.00124416 Jy
! Component: 1150  -  total flux cleaned = 0.00123233 Jy
! Component: 1200  -  total flux cleaned = 0.00119683 Jy
! Component: 1250  -  total flux cleaned = 0.00116163 Jy
! Component: 1300  -  total flux cleaned = 0.00110437 Jy
! Component: 1350  -  total flux cleaned = 0.00104811 Jy
! Component: 1400  -  total flux cleaned = 0.0010148 Jy
! Component: 1450  -  total flux cleaned = 0.000959953 Jy
! Component: 1500  -  total flux cleaned = 0.000927652 Jy
! Component: 1550  -  total flux cleaned = 0.000895727 Jy
! Component: 1600  -  total flux cleaned = 0.000832963 Jy
! Component: 1650  -  total flux cleaned = 0.00079173 Jy
! Component: 1700  -  total flux cleaned = 0.000740858 Jy
! Component: 1750  -  total flux cleaned = 0.000710628 Jy
! Component: 1800  -  total flux cleaned = 0.000650795 Jy
! Component: 1850  -  total flux cleaned = 0.000591761 Jy
! Component: 1900  -  total flux cleaned = 0.00052356 Jy
! Component: 1950  -  total flux cleaned = 0.000484924 Jy
! Component: 2000  -  total flux cleaned = 0.000456276 Jy
! Component: 2050  -  total flux cleaned = 0.000409025 Jy
! Component: 2100  -  total flux cleaned = 0.000362174 Jy
! Component: 2150  -  total flux cleaned = 0.000343606 Jy
! Component: 2200  -  total flux cleaned = 0.000315836 Jy
! Component: 2250  -  total flux cleaned = 0.000279463 Jy
! Component: 2300  -  total flux cleaned = 0.000252397 Jy
! Component: 2350  -  total flux cleaned = 0.000234604 Jy
! Component: 2400  -  total flux cleaned = 0.00021681 Jy
! Component: 2450  -  total flux cleaned = 0.000181618 Jy
! Component: 2500  -  total flux cleaned = 0.000172953 Jy
! Component: 2550  -  total flux cleaned = 0.000146943 Jy
! Component: 2600  -  total flux cleaned = 0.000121175 Jy
! Component: 2650  -  total flux cleaned = 0.000121168 Jy
! Component: 2700  -  total flux cleaned = 0.000104108 Jy
! Component: 2750  -  total flux cleaned = 7.0179e-05 Jy
! Component: 2800  -  total flux cleaned = 7.01715e-05 Jy
! Component: 2850  -  total flux cleaned = 4.50885e-05 Jy
! Component: 2900  -  total flux cleaned = 2.01008e-05 Jy
! Component: 2950  -  total flux cleaned = 3.50097e-06 Jy
! Component: 3000  -  total flux cleaned = -1.30012e-05 Jy
! Component: 3050  -  total flux cleaned = -5.39735e-05 Jy
! Component: 3100  -  total flux cleaned = -7.02629e-05 Jy
! Component: 3150  -  total flux cleaned = -7.01876e-05 Jy
! Component: 3200  -  total flux cleaned = -8.63352e-05 Jy
! Component: 3250  -  total flux cleaned = -0.000102418 Jy
! Component: 3300  -  total flux cleaned = -0.000102413 Jy
! Component: 3350  -  total flux cleaned = -0.000118355 Jy
! Component: 3400  -  total flux cleaned = -0.000118388 Jy
! Component: 3450  -  total flux cleaned = -0.000134232 Jy
! Component: 3500  -  total flux cleaned = -0.000134244 Jy
! Component: 3550  -  total flux cleaned = -0.000118504 Jy
! Component: 3600  -  total flux cleaned = -0.000142006 Jy
! Component: 3650  -  total flux cleaned = -0.000126349 Jy
! Component: 3700  -  total flux cleaned = -0.000118586 Jy
! Component: 3750  -  total flux cleaned = -0.000110855 Jy
! Component: 3800  -  total flux cleaned = -0.000110892 Jy
! Component: 3850  -  total flux cleaned = -8.77217e-05 Jy
! Component: 3900  -  total flux cleaned = -8.00111e-05 Jy
! Component: 3950  -  total flux cleaned = -5.69791e-05 Jy
! Component: 4000  -  total flux cleaned = -6.46173e-05 Jy
! Component: 4050  -  total flux cleaned = -3.40663e-05 Jy
! Total flux subtracted in 4096 components = -3.64506e-06 Jy
! Clean residual min=-0.000413 max=0.000409 Jy/beam
! Clean residual mean=-0.000001 rms=0.000137 Jy/beam
! Combined flux in latest and established models = 0.0339902 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 371 components and 0.0339902 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1344+7907_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.949 x 12.78 at 2.989 degrees (North through East)
! Clean map  min=-0.00095291  max=0.032738 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1344+7907_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0327376 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000136117 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.24735 1.24735 2.49469 4.98939 9.97878 19.9576 39.9151 79.8302
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.032 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1344+7907_S_uvs.log closed on Sun Oct  6 10:33:58 2013