! Started logfile: /g0/scr/pima/npcsa_uvs/J1325+7535_X_uvs.log on Sun Oct 6 10:28:48 2013 obs /g0/scr/pima/npcsa_uvs/J1325+7535_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1325+7535_X_uva.fits ! AN table 1: 54 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.57284 visibilities/baseline/integration-bin. ! Found source: J1325+7535 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 1856 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1325+7535_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.004280Jy sigma=0.762052 ! Fit after self-cal, rms=0.944091Jy sigma=0.678131 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.685 mas, bmaj=10.38 mas, bpa=57.88 degrees ! Estimated noise=45.2401 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708735 Jy ! Component: 100 - total flux cleaned = 0.0799842 Jy ! Total flux subtracted in 100 components = 0.0799842 Jy ! Clean residual min=-0.009478 max=0.009540 Jy/beam ! Clean residual mean=-0.000002 rms=0.004085 Jy/beam ! Combined flux in latest and established models = 0.0799842 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0799842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069775Jy sigma=0.054241 ! Fit after self-cal, rms=0.068453Jy sigma=0.053619 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.031 mas, bmaj=10.71 mas, bpa=57.11 degrees ! Estimated noise=25.4472 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135748 Jy ! Component: 100 - total flux cleaned = 0.00154494 Jy ! Component: 150 - total flux cleaned = 0.00220485 Jy ! Component: 200 - total flux cleaned = 0.00220702 Jy ! Total flux subtracted in 200 components = 0.00220702 Jy ! Clean residual min=-0.002284 max=0.002257 Jy/beam ! Clean residual mean=0.000000 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0821912 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 60 components and 0.0821912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068769Jy sigma=0.052102 ! Fit after self-cal, rms=0.068636Jy sigma=0.051992 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.82 KP 0.94 LA 1.05 ! OV 1.00* PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.97 KP 0.96 LA 0.77 ! OV 1.00* PT 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.96 KP 0.83 LA 0.90 ! OV 1.00* PT 0.90 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.79 KP 0.83 LA 0.81 ! OV 1.00* PT 0.96 ! ! ! Fit before self-cal, rms=0.068636Jy sigma=0.051992 ! Fit after self-cal, rms=0.061736Jy sigma=0.048200 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.016 mas, bmaj=10.74 mas, bpa=57.07 degrees ! Estimated noise=19.9853 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0127813 Jy ! Component: 100 - total flux cleaned = -0.0137297 Jy ! Component: 150 - total flux cleaned = -0.0134827 Jy ! Component: 200 - total flux cleaned = -0.0129587 Jy ! Total flux subtracted in 200 components = -0.0129587 Jy ! Clean residual min=-0.001019 max=0.001030 Jy/beam ! Clean residual mean=0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0692325 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 99 components and 0.0692325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054484Jy sigma=0.050258 ! Fit after self-cal, rms=0.054308Jy sigma=0.050034 ! Inverting map ! Added new window around map position (20.2, -50.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000588529 Jy ! Component: 100 - total flux cleaned = 0.000303782 Jy ! Component: 150 - total flux cleaned = 2.12371e-05 Jy ! Component: 200 - total flux cleaned = -0.00018288 Jy ! Total flux subtracted in 200 components = -0.00018288 Jy ! Clean residual min=-0.001200 max=0.001432 Jy/beam ! Clean residual mean=0.000000 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0690496 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.0690497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054127Jy sigma=0.050103 ! Fit after self-cal, rms=0.054113Jy sigma=0.050071 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054113Jy sigma=0.050071 ! Fit after self-cal, rms=0.049674Jy sigma=0.047576 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.02 mas, bmaj=10.83 mas, bpa=56.97 degrees ! Estimated noise=16.1123 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225701 Jy ! Component: 100 - total flux cleaned = 0.00117183 Jy ! Component: 150 - total flux cleaned = 0.00198422 Jy ! Component: 200 - total flux cleaned = 0.00255504 Jy ! Total flux subtracted in 200 components = 0.00255504 Jy ! Clean residual min=-0.008406 max=0.004583 Jy/beam ! Clean residual mean=0.000007 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.0716047 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 171 components and 0.0716047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047447Jy sigma=0.048106 ! Fit after self-cal, rms=0.047335Jy sigma=0.047892 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104889 Jy ! Component: 100 - total flux cleaned = -0.000682987 Jy ! Component: 150 - total flux cleaned = -0.000565086 Jy ! Component: 200 - total flux cleaned = -0.00026302 Jy ! Total flux subtracted in 200 components = -0.00026302 Jy ! Clean residual min=-0.006261 max=0.003938 Jy/beam ! Clean residual mean=0.000002 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.0713417 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 195 components and 0.0713417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046440Jy sigma=0.048380 ! Fit after self-cal, rms=0.046387Jy sigma=0.048304 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.046387Jy sigma=0.048304 ! Fit after self-cal, rms=0.044869Jy sigma=0.047439 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.065 mas, bmaj=10.89 mas, bpa=56.84 degrees ! Estimated noise=14.5177 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.40415e-05 Jy ! Component: 100 - total flux cleaned = 0.00133934 Jy ! Component: 150 - total flux cleaned = 0.00207618 Jy ! Component: 200 - total flux cleaned = 0.00266615 Jy ! Total flux subtracted in 200 components = 0.00266615 Jy ! Clean residual min=-0.007703 max=0.004480 Jy/beam ! Clean residual mean=0.000006 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.0740078 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 225 components and 0.0740078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043445Jy sigma=0.047931 ! Fit after self-cal, rms=0.043431Jy sigma=0.047777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00104287 Jy ! Component: 100 - total flux cleaned = -0.000919421 Jy ! Component: 150 - total flux cleaned = -0.000616177 Jy ! Component: 200 - total flux cleaned = -0.000708974 Jy ! Total flux subtracted in 200 components = -0.000708974 Jy ! Clean residual min=-0.006245 max=0.003921 Jy/beam ! Clean residual mean=0.000003 rms=0.001346 Jy/beam ! Combined flux in latest and established models = 0.0732988 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 237 components and 0.0732988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042828Jy sigma=0.048157 ! Fit after self-cal, rms=0.042777Jy sigma=0.048079 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.042777Jy sigma=0.048079 ! Fit after self-cal, rms=0.041736Jy sigma=0.047402 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.524 mas, bmaj=10.8 mas, bpa=56.9 degrees ! Estimated noise=13.4631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175303 Jy ! Component: 100 - total flux cleaned = 0.00336891 Jy ! Component: 150 - total flux cleaned = 0.00446139 Jy ! Component: 200 - total flux cleaned = 0.00500802 Jy ! Total flux subtracted in 200 components = 0.00500802 Jy ! Clean residual min=-0.006371 max=0.004025 Jy/beam ! Clean residual mean=0.000009 rms=0.001481 Jy/beam ! Combined flux in latest and established models = 0.0783068 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 280 components and 0.0783068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.040730Jy sigma=0.047864 ! Fit after self-cal, rms=0.040732Jy sigma=0.047724 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000583073 Jy ! Component: 100 - total flux cleaned = -0.00033465 Jy ! Component: 150 - total flux cleaned = -6.82632e-06 Jy ! Component: 200 - total flux cleaned = 0.000396885 Jy ! Total flux subtracted in 200 components = 0.000396885 Jy ! Clean residual min=-0.005189 max=0.003522 Jy/beam ! Clean residual mean=0.000005 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.0787037 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 305 components and 0.0787037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.040312Jy sigma=0.048046 ! Fit after self-cal, rms=0.040261Jy sigma=0.048000 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.112 mas, bmaj=10.91 mas, bpa=56.77 degrees ! Estimated noise=13.2601 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.112 x 10.91 at 56.77 degrees (North through East) ! Clean map min=-0.019722 max=0.055611 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.699 mas, bmaj=10.55 mas, bpa=57.46 degrees ! Estimated noise=23.9855 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0127245 Jy ! Component: 100 - total flux cleaned = -0.0175305 Jy ! Component: 150 - total flux cleaned = -0.0186643 Jy ! Component: 200 - total flux cleaned = -0.0199669 Jy ! Total flux subtracted in 200 components = -0.0199669 Jy ! Clean residual min=-0.024419 max=0.033546 Jy/beam ! Clean residual mean=-0.000021 rms=0.007380 Jy/beam ! Combined flux in latest and established models = -0.0199669 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and -0.0199669 Jy ! Inverting map and beam ! Estimated beam: bmin=2.112 mas, bmaj=10.91 mas, bpa=56.77 degrees ! Estimated noise=13.2601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180934 Jy ! Component: 100 - total flux cleaned = 0.0172429 Jy ! Component: 150 - total flux cleaned = 0.0167811 Jy ! Component: 200 - total flux cleaned = 0.017875 Jy ! Total flux subtracted in 200 components = 0.017875 Jy ! Clean residual min=-0.006290 max=0.005758 Jy/beam ! Clean residual mean=0.000005 rms=0.001836 Jy/beam ! Combined flux in latest and established models = -0.00209185 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and -0.00209185 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.524 mas, bmaj=10.8 mas, bpa=56.9 degrees ! Estimated noise=13.4631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205956 Jy ! Component: 100 - total flux cleaned = 0.00413658 Jy ! Component: 150 - total flux cleaned = 0.00540714 Jy ! Component: 200 - total flux cleaned = 0.00616017 Jy ! Total flux subtracted in 200 components = 0.00616017 Jy ! Clean residual min=-0.004241 max=0.003719 Jy/beam ! Clean residual mean=0.000008 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.00406832 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000572967 Jy ! Component: 100 - total flux cleaned = 0.00150754 Jy ! Component: 150 - total flux cleaned = 0.00236983 Jy ! Component: 200 - total flux cleaned = 0.00317657 Jy ! Total flux subtracted in 200 components = 0.00317657 Jy ! Clean residual min=-0.003720 max=0.003499 Jy/beam ! Clean residual mean=0.000007 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.00724489 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 113 components and 0.00724489 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.112 mas, bmaj=10.91 mas, bpa=56.77 degrees ! Estimated noise=13.2601 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522649 Jy ! Component: 100 - total flux cleaned = 0.000798044 Jy ! Component: 150 - total flux cleaned = 0.00137667 Jy ! Component: 200 - total flux cleaned = 0.00183924 Jy ! Total flux subtracted in 200 components = 0.00183924 Jy ! Clean residual min=-0.002863 max=0.003315 Jy/beam ! Clean residual mean=0.000003 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.00908413 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 131 components and 0.00908413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037178Jy sigma=0.052785 ! Fit after self-cal, rms=0.036914Jy sigma=0.051358 wmodel /g0/scr/pima/npcsa_uvs/J1325+7535_X_map.mod ! Writing 131 model components to file: /g0/scr/pima/npcsa_uvs/J1325+7535_X_map.mod wobs /g0/scr/pima/npcsa_uvs/J1325+7535_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1325+7535_X_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1325+7535_X_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J1325+7535_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100628 Jy ! Component: 100 - total flux cleaned = -0.00127047 Jy ! Component: 150 - total flux cleaned = -0.00124308 Jy ! Component: 200 - total flux cleaned = -0.00129442 Jy ! Component: 250 - total flux cleaned = -0.00136506 Jy ! Component: 300 - total flux cleaned = -0.00136511 Jy ! Component: 350 - total flux cleaned = -0.00140614 Jy ! Component: 400 - total flux cleaned = -0.00144556 Jy ! Component: 450 - total flux cleaned = -0.00150203 Jy ! Component: 500 - total flux cleaned = -0.00150255 Jy ! Component: 550 - total flux cleaned = -0.0014151 Jy ! Component: 600 - total flux cleaned = -0.00139799 Jy ! Component: 650 - total flux cleaned = -0.00141491 Jy ! Component: 700 - total flux cleaned = -0.00146451 Jy ! Component: 750 - total flux cleaned = -0.00152974 Jy ! Component: 800 - total flux cleaned = -0.001578 Jy ! Component: 850 - total flux cleaned = -0.00162581 Jy ! Component: 900 - total flux cleaned = -0.00168896 Jy ! Component: 950 - total flux cleaned = -0.00172016 Jy ! Component: 1000 - total flux cleaned = -0.00175137 Jy ! Component: 1050 - total flux cleaned = -0.00179766 Jy ! Component: 1100 - total flux cleaned = -0.00182833 Jy ! Component: 1150 - total flux cleaned = -0.00185876 Jy ! Component: 1200 - total flux cleaned = -0.00190426 Jy ! Component: 1250 - total flux cleaned = -0.00193448 Jy ! Component: 1300 - total flux cleaned = -0.00197982 Jy ! Component: 1350 - total flux cleaned = -0.00199496 Jy ! Component: 1400 - total flux cleaned = -0.00202509 Jy ! Component: 1450 - total flux cleaned = -0.00205531 Jy ! Component: 1500 - total flux cleaned = -0.00210015 Jy ! Component: 1550 - total flux cleaned = -0.00211492 Jy ! Component: 1600 - total flux cleaned = -0.0021 Jy ! Component: 1650 - total flux cleaned = -0.00208482 Jy ! Component: 1700 - total flux cleaned = -0.00208477 Jy ! Component: 1750 - total flux cleaned = -0.00206962 Jy ! Component: 1800 - total flux cleaned = -0.00206967 Jy ! Component: 1850 - total flux cleaned = -0.00205436 Jy ! Component: 1900 - total flux cleaned = -0.00205434 Jy ! Component: 1950 - total flux cleaned = -0.00202347 Jy ! Component: 2000 - total flux cleaned = -0.00200799 Jy ! Component: 2050 - total flux cleaned = -0.00199219 Jy ! Component: 2100 - total flux cleaned = -0.00196041 Jy ! Component: 2150 - total flux cleaned = -0.00196025 Jy ! Component: 2200 - total flux cleaned = -0.00194423 Jy ! Component: 2250 - total flux cleaned = -0.00196034 Jy ! Component: 2300 - total flux cleaned = -0.00194404 Jy ! Component: 2350 - total flux cleaned = -0.00196041 Jy ! Component: 2400 - total flux cleaned = -0.00196034 Jy ! Component: 2450 - total flux cleaned = -0.00197693 Jy ! Component: 2500 - total flux cleaned = -0.00199366 Jy ! Component: 2550 - total flux cleaned = -0.00201054 Jy ! Component: 2600 - total flux cleaned = -0.00194219 Jy ! Component: 2650 - total flux cleaned = -0.00190758 Jy ! Component: 2700 - total flux cleaned = -0.00187266 Jy ! Component: 2750 - total flux cleaned = -0.00185522 Jy ! Component: 2800 - total flux cleaned = -0.00180202 Jy ! Component: 2850 - total flux cleaned = -0.00178403 Jy ! Component: 2900 - total flux cleaned = -0.00180222 Jy ! Component: 2950 - total flux cleaned = -0.00182051 Jy ! Component: 3000 - total flux cleaned = -0.0018204 Jy ! Component: 3050 - total flux cleaned = -0.0018395 Jy ! Component: 3100 - total flux cleaned = -0.00185911 Jy ! Component: 3150 - total flux cleaned = -0.00187903 Jy ! Component: 3200 - total flux cleaned = -0.00189936 Jy ! Component: 3250 - total flux cleaned = -0.00192004 Jy ! Component: 3300 - total flux cleaned = -0.00194123 Jy ! Component: 3350 - total flux cleaned = -0.00198416 Jy ! Component: 3400 - total flux cleaned = -0.00200581 Jy ! Component: 3450 - total flux cleaned = -0.00205025 Jy ! Component: 3500 - total flux cleaned = -0.002073 Jy ! Component: 3550 - total flux cleaned = -0.00214231 Jy ! Component: 3600 - total flux cleaned = -0.00216591 Jy ! Component: 3650 - total flux cleaned = -0.00221395 Jy ! Component: 3700 - total flux cleaned = -0.00223869 Jy ! Component: 3750 - total flux cleaned = -0.00226344 Jy ! Component: 3800 - total flux cleaned = -0.00231428 Jy ! Component: 3850 - total flux cleaned = -0.00231445 Jy ! Component: 3900 - total flux cleaned = -0.00239445 Jy ! Component: 3950 - total flux cleaned = -0.00239452 Jy ! Component: 4000 - total flux cleaned = -0.00242215 Jy ! Component: 4050 - total flux cleaned = -0.00242263 Jy ! Total flux subtracted in 4096 components = -0.00245132 Jy ! Clean residual min=-0.001578 max=0.001567 Jy/beam ! Clean residual mean=-0.000004 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.00663281 Jy keep ! Adding 168 model components to the UV plane model. ! The established model now contains 299 components and 0.00663281 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1325+7535_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.112 x 10.91 at 56.77 degrees (North through East) ! Clean map min=-0.0093906 max=0.035757 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1325+7535_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0357574 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000580457 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.86995 4.86995 9.7399 19.4798 38.9596 77.9192 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.035 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1325+7535_X_uvs.log closed on Sun Oct 6 10:28:52 2013