! Started logfile: /g0/scr/pima/npcsa_uvs/J1325+7535_S_uvs.log on Sun Oct 6 10:33:49 2013 obs /g0/scr/pima/npcsa_uvs/J1325+7535_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1325+7535_S_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.571193 visibilities/baseline/integration-bin. ! Found source: J1325+7535 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 5552 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1325+7535_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003540Jy sigma=0.853719 ! Fit after self-cal, rms=0.932492Jy sigma=0.748056 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.889 mas, bmaj=9.48 mas, bpa=-0.9084 degrees ! Estimated noise=28.7148 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0760137 Jy ! Component: 100 - total flux cleaned = 0.0895536 Jy ! Total flux subtracted in 100 components = 0.0895536 Jy ! Clean residual min=-0.009102 max=0.009146 Jy/beam ! Clean residual mean=-0.000003 rms=0.002192 Jy/beam ! Combined flux in latest and established models = 0.0895536 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0895536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095355Jy sigma=0.081209 ! Fit after self-cal, rms=0.093930Jy sigma=0.080094 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.221 mas, bmaj=10.33 mas, bpa=1.161 degrees ! Estimated noise=12.5757 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113702 Jy ! Component: 100 - total flux cleaned = 0.016206 Jy ! Component: 150 - total flux cleaned = 0.0175273 Jy ! Component: 200 - total flux cleaned = 0.0176141 Jy ! Total flux subtracted in 200 components = 0.0176141 Jy ! Clean residual min=-0.006569 max=0.005324 Jy/beam ! Clean residual mean=0.000006 rms=0.001639 Jy/beam ! Combined flux in latest and established models = 0.107168 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 36 components and 0.107168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095308Jy sigma=0.076978 ! Fit after self-cal, rms=0.095240Jy sigma=0.076907 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.01 HN 0.79 KP 0.91 ! LA 0.90 MK 0.78 NL 1.03 OV 0.99 ! PT 1.02 SC 0.75 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.84 KP 0.84 ! LA 0.90 MK 0.85 NL 1.05 OV 1.06 ! PT 0.91 SC 0.65 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.02 HN 0.76 KP 0.90 ! LA 0.72 MK 0.90 NL 1.03 OV 1.02 ! PT 1.02 SC 0.83 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.90 HN 0.66 KP 0.90 ! LA 0.59 MK 1.03 NL 0.97 OV 0.84 ! PT 0.93 SC 0.90 ! ! ! Fit before self-cal, rms=0.095240Jy sigma=0.076907 ! Fit after self-cal, rms=0.083535Jy sigma=0.071695 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.078 mas, bmaj=10.3 mas, bpa=0.604 degrees ! Estimated noise=10.2426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0141265 Jy ! Component: 100 - total flux cleaned = -0.0170383 Jy ! Component: 150 - total flux cleaned = -0.0172522 Jy ! Component: 200 - total flux cleaned = -0.017333 Jy ! Total flux subtracted in 200 components = -0.017333 Jy ! Clean residual min=-0.003142 max=0.002752 Jy/beam ! Clean residual mean=-0.000014 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0898348 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 45 components and 0.0898348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076905Jy sigma=0.074042 ! Fit after self-cal, rms=0.077197Jy sigma=0.073871 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077197Jy sigma=0.073871 ! Fit after self-cal, rms=0.069422Jy sigma=0.071452 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.011 mas, bmaj=10.3 mas, bpa=0.5173 degrees ! Estimated noise=8.4598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.011587 Jy ! Component: 100 - total flux cleaned = -0.014185 Jy ! Component: 150 - total flux cleaned = -0.0145983 Jy ! Component: 200 - total flux cleaned = -0.0147217 Jy ! Total flux subtracted in 200 components = -0.0147217 Jy ! Clean residual min=-0.002395 max=0.002215 Jy/beam ! Clean residual mean=-0.000011 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.075113 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.075113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064018Jy sigma=0.073820 ! Fit after self-cal, rms=0.063996Jy sigma=0.073801 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.48809e-05 Jy ! Component: 100 - total flux cleaned = 1.63373e-05 Jy ! Component: 150 - total flux cleaned = -2.02782e-05 Jy ! Component: 200 - total flux cleaned = -5.49278e-05 Jy ! Total flux subtracted in 200 components = -5.49278e-05 Jy ! Clean residual min=-0.002357 max=0.002089 Jy/beam ! Clean residual mean=-0.000011 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0750581 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.0750581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063956Jy sigma=0.073827 ! Fit after self-cal, rms=0.063956Jy sigma=0.073825 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063956Jy sigma=0.073825 ! Fit after self-cal, rms=0.057326Jy sigma=0.071380 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=10.29 mas, bpa=0.5302 degrees ! Estimated noise=6.98934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00929005 Jy ! Component: 100 - total flux cleaned = -0.011437 Jy ! Component: 150 - total flux cleaned = -0.0121137 Jy ! Component: 200 - total flux cleaned = -0.0122417 Jy ! Total flux subtracted in 200 components = -0.0122417 Jy ! Clean residual min=-0.001925 max=0.001730 Jy/beam ! Clean residual mean=-0.000009 rms=0.000511 Jy/beam ! Combined flux in latest and established models = 0.0628164 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 58 components and 0.0628164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053024Jy sigma=0.073764 ! Fit after self-cal, rms=0.053019Jy sigma=0.073758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.77439e-05 Jy ! Component: 100 - total flux cleaned = -2.46076e-05 Jy ! Component: 150 - total flux cleaned = -5.07232e-05 Jy ! Component: 200 - total flux cleaned = -7.59449e-05 Jy ! Total flux subtracted in 200 components = -7.59449e-05 Jy ! Clean residual min=-0.001951 max=0.001692 Jy/beam ! Clean residual mean=-0.000009 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.0627405 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.0627405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052985Jy sigma=0.073795 ! Fit after self-cal, rms=0.052982Jy sigma=0.073792 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052982Jy sigma=0.073792 ! Fit after self-cal, rms=0.047448Jy sigma=0.071329 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.561 mas, bmaj=11.69 mas, bpa=10.34 degrees ! Estimated noise=6.54865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00787495 Jy ! Component: 100 - total flux cleaned = -0.00963738 Jy ! Component: 150 - total flux cleaned = -0.010194 Jy ! Component: 200 - total flux cleaned = -0.0104163 Jy ! Total flux subtracted in 200 components = -0.0104163 Jy ! Clean residual min=-0.001826 max=0.001392 Jy/beam ! Clean residual mean=-0.000012 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0523242 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.0523242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043871Jy sigma=0.073768 ! Fit after self-cal, rms=0.043864Jy sigma=0.073760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.61764e-06 Jy ! Component: 100 - total flux cleaned = -3.4068e-05 Jy ! Component: 150 - total flux cleaned = -6.87947e-05 Jy ! Component: 200 - total flux cleaned = -9.36967e-05 Jy ! Total flux subtracted in 200 components = -9.36967e-05 Jy ! Clean residual min=-0.001827 max=0.001378 Jy/beam ! Clean residual mean=-0.000012 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0522305 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 72 components and 0.0522305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043872Jy sigma=0.073739 ! Fit after self-cal, rms=0.043868Jy sigma=0.073737 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.888 mas, bmaj=10.29 mas, bpa=0.5637 degrees ! Estimated noise=5.77146 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.888 x 10.29 at 0.5637 degrees (North through East) ! Clean map min=-0.0018661 max=0.043202 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.638 mas, bmaj=9.543 mas, bpa=-1.525 degrees ! Estimated noise=12.5302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335851 Jy ! Component: 100 - total flux cleaned = 0.0429506 Jy ! Component: 150 - total flux cleaned = 0.0470501 Jy ! Component: 200 - total flux cleaned = 0.0482851 Jy ! Total flux subtracted in 200 components = 0.0482851 Jy ! Clean residual min=-0.002886 max=0.003026 Jy/beam ! Clean residual mean=-0.000005 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.0482851 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0482851 Jy ! Inverting map and beam ! Estimated beam: bmin=3.888 mas, bmaj=10.29 mas, bpa=0.5637 degrees ! Estimated noise=5.77146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250117 Jy ! Component: 100 - total flux cleaned = 0.00325534 Jy ! Component: 150 - total flux cleaned = 0.00347078 Jy ! Component: 200 - total flux cleaned = 0.00350387 Jy ! Total flux subtracted in 200 components = 0.00350387 Jy ! Clean residual min=-0.001565 max=0.001266 Jy/beam ! Clean residual mean=-0.000007 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.051789 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 45 components and 0.051789 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.561 mas, bmaj=11.69 mas, bpa=10.34 degrees ! Estimated noise=6.54865 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.90247e-05 Jy ! Component: 100 - total flux cleaned = 3.85354e-05 Jy ! Component: 150 - total flux cleaned = -2.45094e-05 Jy ! Component: 200 - total flux cleaned = -6.17808e-05 Jy ! Total flux subtracted in 200 components = -6.17808e-05 Jy ! Clean residual min=-0.001564 max=0.001211 Jy/beam ! Clean residual mean=-0.000010 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.0517272 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.97294e-05 Jy ! Component: 100 - total flux cleaned = -7.86328e-05 Jy ! Component: 150 - total flux cleaned = -9.14425e-05 Jy ! Component: 200 - total flux cleaned = -0.000102743 Jy ! Total flux subtracted in 200 components = -0.000102743 Jy ! Clean residual min=-0.001561 max=0.001184 Jy/beam ! Clean residual mean=-0.000009 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0516244 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 79 components and 0.0516244 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.888 mas, bmaj=10.29 mas, bpa=0.5637 degrees ! Estimated noise=5.77146 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122728 Jy ! Component: 100 - total flux cleaned = 0.000124205 Jy ! Component: 150 - total flux cleaned = 9.23501e-05 Jy ! Component: 200 - total flux cleaned = 6.42546e-05 Jy ! Total flux subtracted in 200 components = 6.42546e-05 Jy ! Clean residual min=-0.001408 max=0.001254 Jy/beam ! Clean residual mean=-0.000006 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0516887 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.0516887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043771Jy sigma=0.073801 ! Fit after self-cal, rms=0.043766Jy sigma=0.073770 wmodel /g0/scr/pima/npcsa_uvs/J1325+7535_S_map.mod ! Writing 102 model components to file: /g0/scr/pima/npcsa_uvs/J1325+7535_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J1325+7535_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1325+7535_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1325+7535_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J1325+7535_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344754 Jy ! Component: 100 - total flux cleaned = -0.000716412 Jy ! Component: 150 - total flux cleaned = -0.000959178 Jy ! Component: 200 - total flux cleaned = -0.00114899 Jy ! Component: 250 - total flux cleaned = -0.00131116 Jy ! Component: 300 - total flux cleaned = -0.00146648 Jy ! Component: 350 - total flux cleaned = -0.00153293 Jy ! Component: 400 - total flux cleaned = -0.00159678 Jy ! Component: 450 - total flux cleaned = -0.00162702 Jy ! Component: 500 - total flux cleaned = -0.00167138 Jy ! Component: 550 - total flux cleaned = -0.00175804 Jy ! Component: 600 - total flux cleaned = -0.00180021 Jy ! Component: 650 - total flux cleaned = -0.00188292 Jy ! Component: 700 - total flux cleaned = -0.00197711 Jy ! Component: 750 - total flux cleaned = -0.00206925 Jy ! Component: 800 - total flux cleaned = -0.00217218 Jy ! Component: 850 - total flux cleaned = -0.00229831 Jy ! Component: 900 - total flux cleaned = -0.00237284 Jy ! Component: 950 - total flux cleaned = -0.00248259 Jy ! Component: 1000 - total flux cleaned = -0.00259001 Jy ! Component: 1050 - total flux cleaned = -0.00264877 Jy ! Component: 1100 - total flux cleaned = -0.00271834 Jy ! Component: 1150 - total flux cleaned = -0.00282104 Jy ! Component: 1200 - total flux cleaned = -0.00284346 Jy ! Component: 1250 - total flux cleaned = -0.00286557 Jy ! Component: 1300 - total flux cleaned = -0.00288739 Jy ! Component: 1350 - total flux cleaned = -0.00288735 Jy ! Component: 1400 - total flux cleaned = -0.00289797 Jy ! Component: 1450 - total flux cleaned = -0.00290866 Jy ! Component: 1500 - total flux cleaned = -0.00292954 Jy ! Component: 1550 - total flux cleaned = -0.00292957 Jy ! Component: 1600 - total flux cleaned = -0.00292935 Jy ! Component: 1650 - total flux cleaned = -0.00293941 Jy ! Component: 1700 - total flux cleaned = -0.00294938 Jy ! Component: 1750 - total flux cleaned = -0.0029295 Jy ! Component: 1800 - total flux cleaned = -0.00290982 Jy ! Component: 1850 - total flux cleaned = -0.00290976 Jy ! Component: 1900 - total flux cleaned = -0.00289052 Jy ! Component: 1950 - total flux cleaned = -0.0029097 Jy ! Component: 2000 - total flux cleaned = -0.00293807 Jy ! Component: 2050 - total flux cleaned = -0.00298494 Jy ! Component: 2100 - total flux cleaned = -0.00301278 Jy ! Component: 2150 - total flux cleaned = -0.00303128 Jy ! Component: 2200 - total flux cleaned = -0.00308634 Jy ! Component: 2250 - total flux cleaned = -0.00313203 Jy ! Component: 2300 - total flux cleaned = -0.00315016 Jy ! Component: 2350 - total flux cleaned = -0.0032131 Jy ! Component: 2400 - total flux cleaned = -0.00324887 Jy ! Component: 2450 - total flux cleaned = -0.003311 Jy ! Component: 2500 - total flux cleaned = -0.00336379 Jy ! Component: 2550 - total flux cleaned = -0.00339873 Jy ! Component: 2600 - total flux cleaned = -0.00343359 Jy ! Component: 2650 - total flux cleaned = -0.00351148 Jy ! Component: 2700 - total flux cleaned = -0.00357161 Jy ! Component: 2750 - total flux cleaned = -0.00363142 Jy ! Component: 2800 - total flux cleaned = -0.00371637 Jy ! Component: 2850 - total flux cleaned = -0.00377546 Jy ! Component: 2900 - total flux cleaned = -0.00384271 Jy ! Component: 2950 - total flux cleaned = -0.0039097 Jy ! Component: 3000 - total flux cleaned = -0.00398467 Jy ! Component: 3050 - total flux cleaned = -0.00405926 Jy ! Component: 3100 - total flux cleaned = -0.0041088 Jy ! Component: 3150 - total flux cleaned = -0.0041582 Jy ! Component: 3200 - total flux cleaned = -0.00421563 Jy ! Component: 3250 - total flux cleaned = -0.00425648 Jy ! Component: 3300 - total flux cleaned = -0.00432168 Jy ! Component: 3350 - total flux cleaned = -0.00437044 Jy ! Component: 3400 - total flux cleaned = -0.00442714 Jy ! Component: 3450 - total flux cleaned = -0.00445142 Jy ! Component: 3500 - total flux cleaned = -0.00450785 Jy ! Component: 3550 - total flux cleaned = -0.00454809 Jy ! Component: 3600 - total flux cleaned = -0.00459631 Jy ! Component: 3650 - total flux cleaned = -0.00464439 Jy ! Component: 3700 - total flux cleaned = -0.00468438 Jy ! Component: 3750 - total flux cleaned = -0.00471631 Jy ! Component: 3800 - total flux cleaned = -0.00477208 Jy ! Component: 3850 - total flux cleaned = -0.00478798 Jy ! Component: 3900 - total flux cleaned = -0.00481187 Jy ! Component: 3950 - total flux cleaned = -0.00485948 Jy ! Component: 4000 - total flux cleaned = -0.00489121 Jy ! Component: 4050 - total flux cleaned = -0.00492283 Jy ! Total flux subtracted in 4096 components = -0.00493868 Jy ! Clean residual min=-0.000441 max=0.000468 Jy/beam ! Clean residual mean=-0.000002 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.04675 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 383 components and 0.04675 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1325+7535_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.888 x 10.29 at 0.5637 degrees (North through East) ! Clean map min=-0.0018712 max=0.043901 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1325+7535_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0439014 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000136252 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.931077 0.931077 1.86215 3.72431 7.44862 14.8972 29.7945 59.5889 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1325+7535_S_uvs.log closed on Sun Oct 6 10:33:53 2013