! Started logfile: /g0/scr/pima/npcsa_uvs/J1323+7942_S_uvs.log on Sun Oct  6 10:33:44 2013
obs /g0/scr/pima/npcsa_uvs/J1323+7942_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1323+7942_S_uva.fits
! AN table 1: 55 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.933333 visibilities/baseline/integration-bin.
! Found source: J1323+7942
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 9240 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1323+7942_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.085790Jy  sigma=3.107057
! Fit after  self-cal, rms=0.695332Jy  sigma=1.552783
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.674 mas, bmaj=9.55 mas, bpa=0.9004 degrees
! Estimated noise=7.00345 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.27194 Jy
! Component: 100  -  total flux cleaned = 0.378318 Jy
! Total flux subtracted in 100 components = 0.378318 Jy
! Clean residual min=-0.020195 max=0.047611 Jy/beam
! Clean residual mean=0.000032 rms=0.007402 Jy/beam
! Combined flux in latest and established models = 0.378318 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.378318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144244Jy  sigma=0.445506
! Fit after  self-cal, rms=0.142039Jy  sigma=0.442779
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0562027 Jy
! Component: 100  -  total flux cleaned = 0.0837843 Jy
! Total flux subtracted in 100 components = 0.0837843 Jy
! Clean residual min=-0.013978 max=0.024424 Jy/beam
! Clean residual mean=0.000018 rms=0.003876 Jy/beam
! Combined flux in latest and established models = 0.462102 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 0.462102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120129Jy  sigma=0.331521
! Fit after  self-cal, rms=0.120162Jy  sigma=0.330906
! Inverting map 
! Added new window around map position (4, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0238606 Jy
! Component: 100  -  total flux cleaned = 0.036152 Jy
! Total flux subtracted in 100 components = 0.036152 Jy
! Clean residual min=-0.013697 max=0.011955 Jy/beam
! Clean residual mean=0.000012 rms=0.003071 Jy/beam
! Combined flux in latest and established models = 0.498254 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 35 components and 0.498254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115153Jy  sigma=0.308553
! Fit after  self-cal, rms=0.114865Jy  sigma=0.307928
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.781 mas, bmaj=10.49 mas, bpa=0.2884 degrees
! Estimated noise=2.99397 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154791 Jy
! Component: 100  -  total flux cleaned = 0.0247888 Jy
! Component: 150  -  total flux cleaned = 0.0308662 Jy
! Component: 200  -  total flux cleaned = 0.0348571 Jy
! Total flux subtracted in 200 components = 0.0348571 Jy
! Clean residual min=-0.013969 max=0.011631 Jy/beam
! Clean residual mean=0.000033 rms=0.003195 Jy/beam
! Combined flux in latest and established models = 0.533112 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 63 components and 0.533111 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113381Jy  sigma=0.298913
! Fit after  self-cal, rms=0.113211Jy  sigma=0.298557
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.99     HN        0.96     KP        0.98     
!   LA        1.09     MK        0.85     NL        1.00     OV        1.00     
!   PT        1.08     SC        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.97     KP        0.98     
!   LA        1.05     MK        0.91     NL        0.99     OV        1.00     
!   PT        1.02     SC        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.05     HN        1.01     KP        0.99     
!   LA        0.85     MK        0.99     NL        1.08     OV        1.05     
!   PT        1.08     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.94     KP        0.92     
!   LA        0.74     MK        1.03     NL        1.01     OV        0.90     
!   PT        0.97     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.113211Jy  sigma=0.298557
! Fit after  self-cal, rms=0.100470Jy  sigma=0.252106
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.719 mas, bmaj=10.52 mas, bpa=0.3521 degrees
! Estimated noise=2.89961 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00794487 Jy
! Component: 100  -  total flux cleaned = -0.00861738 Jy
! Component: 150  -  total flux cleaned = -0.00922085 Jy
! Component: 200  -  total flux cleaned = -0.00945084 Jy
! Total flux subtracted in 200 components = -0.00945084 Jy
! Clean residual min=-0.003291 max=0.003991 Jy/beam
! Clean residual mean=0.000005 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 0.523661 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 78 components and 0.523661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098092Jy  sigma=0.253131
! Fit after  self-cal, rms=0.098073Jy  sigma=0.252901
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098073Jy  sigma=0.252901
! Fit after  self-cal, rms=0.097050Jy  sigma=0.251578
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.693 mas, bmaj=10.51 mas, bpa=0.417 degrees
! Estimated noise=2.83018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00760533 Jy
! Component: 100  -  total flux cleaned = -0.00919233 Jy
! Component: 150  -  total flux cleaned = -0.00947928 Jy
! Component: 200  -  total flux cleaned = -0.00959926 Jy
! Total flux subtracted in 200 components = -0.00959926 Jy
! Clean residual min=-0.003175 max=0.003708 Jy/beam
! Clean residual mean=0.000006 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.514061 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 92 components and 0.514061 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.095181Jy  sigma=0.252740
! Fit after  self-cal, rms=0.095155Jy  sigma=0.252687
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000299712 Jy
! Component: 100  -  total flux cleaned = 0.000302082 Jy
! Component: 150  -  total flux cleaned = 0.000344369 Jy
! Component: 200  -  total flux cleaned = 0.00030774 Jy
! Total flux subtracted in 200 components = 0.00030774 Jy
! Clean residual min=-0.003083 max=0.003571 Jy/beam
! Clean residual mean=0.000006 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.514369 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 104 components and 0.514369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094976Jy  sigma=0.252697
! Fit after  self-cal, rms=0.094964Jy  sigma=0.252672
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.094964Jy  sigma=0.252672
! Fit after  self-cal, rms=0.093946Jy  sigma=0.251389
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.664 mas, bmaj=10.51 mas, bpa=0.5096 degrees
! Estimated noise=2.76278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00682752 Jy
! Component: 100  -  total flux cleaned = -0.00890235 Jy
! Component: 150  -  total flux cleaned = -0.00940878 Jy
! Component: 200  -  total flux cleaned = -0.00961389 Jy
! Total flux subtracted in 200 components = -0.00961389 Jy
! Clean residual min=-0.003138 max=0.003712 Jy/beam
! Clean residual mean=0.000007 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.504755 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 113 components and 0.504755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092397Jy  sigma=0.252631
! Fit after  self-cal, rms=0.092389Jy  sigma=0.252610
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00345722 Jy
! Component: 100  -  total flux cleaned = 0.004466 Jy
! Component: 150  -  total flux cleaned = 0.00482136 Jy
! Component: 200  -  total flux cleaned = 0.00508082 Jy
! Total flux subtracted in 200 components = 0.00508082 Jy
! Clean residual min=-0.002585 max=0.003086 Jy/beam
! Clean residual mean=0.000002 rms=0.000706 Jy/beam
! Combined flux in latest and established models = 0.509836 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 157 components and 0.509836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092224Jy  sigma=0.252207
! Fit after  self-cal, rms=0.092206Jy  sigma=0.252148
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092206Jy  sigma=0.252148
! Fit after  self-cal, rms=0.091306Jy  sigma=0.250868
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.251 mas, bmaj=12.09 mas, bpa=3.479 degrees
! Estimated noise=2.69954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00645931 Jy
! Component: 100  -  total flux cleaned = -0.0063691 Jy
! Component: 150  -  total flux cleaned = -0.00612772 Jy
! Component: 200  -  total flux cleaned = -0.00616194 Jy
! Total flux subtracted in 200 components = -0.00616194 Jy
! Clean residual min=-0.002702 max=0.003245 Jy/beam
! Clean residual mean=0.000001 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.503674 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 182 components and 0.503674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089893Jy  sigma=0.252098
! Fit after  self-cal, rms=0.089881Jy  sigma=0.252063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.5, 14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140441 Jy
! Component: 100  -  total flux cleaned = 0.00128599 Jy
! Component: 150  -  total flux cleaned = 0.00138003 Jy
! Component: 200  -  total flux cleaned = 0.00153952 Jy
! Total flux subtracted in 200 components = 0.00153952 Jy
! Clean residual min=-0.001734 max=0.001805 Jy/beam
! Clean residual mean=0.000000 rms=0.000485 Jy/beam
! Combined flux in latest and established models = 0.505213 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 229 components and 0.505213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089802Jy  sigma=0.251865
! Fit after  self-cal, rms=0.089797Jy  sigma=0.251856
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.643 mas, bmaj=10.52 mas, bpa=0.571 degrees
! Estimated noise=2.69999 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.643 x 10.52 at 0.571 degrees (North through East)
! Clean map  min=-0.0020457  max=0.3394 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.578 mas, bmaj=9.638 mas, bpa=1.215 degrees
! Estimated noise=6.12987 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.242336 Jy
! Component: 100  -  total flux cleaned = 0.343354 Jy
! Component: 150  -  total flux cleaned = 0.396664 Jy
! Component: 200  -  total flux cleaned = 0.427925 Jy
! Total flux subtracted in 200 components = 0.427925 Jy
! Clean residual min=-0.008873 max=0.015816 Jy/beam
! Clean residual mean=0.000016 rms=0.002759 Jy/beam
! Combined flux in latest and established models = 0.427925 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.427925 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.643 mas, bmaj=10.52 mas, bpa=0.571 degrees
! Estimated noise=2.69999 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0297184 Jy
! Component: 100  -  total flux cleaned = 0.0444081 Jy
! Component: 150  -  total flux cleaned = 0.0531126 Jy
! Component: 200  -  total flux cleaned = 0.0586714 Jy
! Total flux subtracted in 200 components = 0.0586714 Jy
! Clean residual min=-0.003456 max=0.004157 Jy/beam
! Clean residual mean=0.000012 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.486597 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 75 components and 0.486597 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.251 mas, bmaj=12.09 mas, bpa=3.479 degrees
! Estimated noise=2.69954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00572778 Jy
! Component: 100  -  total flux cleaned = 0.00926062 Jy
! Component: 150  -  total flux cleaned = 0.0115433 Jy
! Component: 200  -  total flux cleaned = 0.012925 Jy
! Total flux subtracted in 200 components = 0.012925 Jy
! Clean residual min=-0.002630 max=0.002518 Jy/beam
! Clean residual mean=0.000008 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.499522 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011354 Jy
! Component: 100  -  total flux cleaned = 0.00195848 Jy
! Component: 150  -  total flux cleaned = 0.00259949 Jy
! Component: 200  -  total flux cleaned = 0.00305475 Jy
! Total flux subtracted in 200 components = 0.00305475 Jy
! Clean residual min=-0.001900 max=0.002076 Jy/beam
! Clean residual mean=0.000004 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.502577 Jy
! Adding 102 model components to the UV plane model.
! The established model now contains 173 components and 0.502577 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.643 mas, bmaj=10.52 mas, bpa=0.571 degrees
! Estimated noise=2.69999 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.13413e-05 Jy
! Component: 100  -  total flux cleaned = -8.23135e-05 Jy
! Component: 150  -  total flux cleaned = -0.000135818 Jy
! Component: 200  -  total flux cleaned = -0.000134169 Jy
! Total flux subtracted in 200 components = -0.000134169 Jy
! Clean residual min=-0.001717 max=0.002037 Jy/beam
! Clean residual mean=0.000002 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.502443 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 205 components and 0.502443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089569Jy  sigma=0.251872
! Fit after  self-cal, rms=0.089566Jy  sigma=0.251831
wmodel /g0/scr/pima/npcsa_uvs/J1323+7942_S_map.mod
! Writing 205 model components to file: /g0/scr/pima/npcsa_uvs/J1323+7942_S_map.mod
wobs /g0/scr/pima/npcsa_uvs/J1323+7942_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1323+7942_S_uvs.fits
wwins /g0/scr/pima/npcsa_uvs/J1323+7942_S_map.win
! wwins: Wrote 4 windows to /g0/scr/pima/npcsa_uvs/J1323+7942_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000726492 Jy
! Component: 100  -  total flux cleaned = 0.00115251 Jy
! Component: 150  -  total flux cleaned = 0.00121581 Jy
! Component: 200  -  total flux cleaned = 0.00124484 Jy
! Component: 250  -  total flux cleaned = 0.0012154 Jy
! Component: 300  -  total flux cleaned = 0.00124367 Jy
! Component: 350  -  total flux cleaned = 0.00124348 Jy
! Component: 400  -  total flux cleaned = 0.00119098 Jy
! Component: 450  -  total flux cleaned = 0.00126877 Jy
! Component: 500  -  total flux cleaned = 0.00129401 Jy
! Component: 550  -  total flux cleaned = 0.00141849 Jy
! Component: 600  -  total flux cleaned = 0.00146746 Jy
! Component: 650  -  total flux cleaned = 0.00158787 Jy
! Component: 700  -  total flux cleaned = 0.00168236 Jy
! Component: 750  -  total flux cleaned = 0.00177545 Jy
! Component: 800  -  total flux cleaned = 0.00188965 Jy
! Component: 850  -  total flux cleaned = 0.00197966 Jy
! Component: 900  -  total flux cleaned = 0.0020467 Jy
! Component: 950  -  total flux cleaned = 0.00211296 Jy
! Component: 1000  -  total flux cleaned = 0.0022433 Jy
! Component: 1050  -  total flux cleaned = 0.00237109 Jy
! Component: 1100  -  total flux cleaned = 0.00247641 Jy
! Component: 1150  -  total flux cleaned = 0.00260076 Jy
! Component: 1200  -  total flux cleaned = 0.00266221 Jy
! Component: 1250  -  total flux cleaned = 0.0027834 Jy
! Component: 1300  -  total flux cleaned = 0.00294242 Jy
! Component: 1350  -  total flux cleaned = 0.00308 Jy
! Component: 1400  -  total flux cleaned = 0.00321567 Jy
! Component: 1450  -  total flux cleaned = 0.00329257 Jy
! Component: 1500  -  total flux cleaned = 0.00342578 Jy
! Component: 1550  -  total flux cleaned = 0.00344477 Jy
! Component: 1600  -  total flux cleaned = 0.00361289 Jy
! Component: 1650  -  total flux cleaned = 0.0037238 Jy
! Component: 1700  -  total flux cleaned = 0.00381562 Jy
! Component: 1750  -  total flux cleaned = 0.00388784 Jy
! Component: 1800  -  total flux cleaned = 0.00395986 Jy
! Component: 1850  -  total flux cleaned = 0.00404922 Jy
! Component: 1900  -  total flux cleaned = 0.00415513 Jy
! Component: 1950  -  total flux cleaned = 0.00424264 Jy
! Component: 2000  -  total flux cleaned = 0.00431211 Jy
! Component: 2050  -  total flux cleaned = 0.00441573 Jy
! Component: 2100  -  total flux cleaned = 0.00443282 Jy
! Component: 2150  -  total flux cleaned = 0.00450085 Jy
! Component: 2200  -  total flux cleaned = 0.00455145 Jy
! Component: 2250  -  total flux cleaned = 0.00463515 Jy
! Component: 2300  -  total flux cleaned = 0.00470152 Jy
! Component: 2350  -  total flux cleaned = 0.00471818 Jy
! Component: 2400  -  total flux cleaned = 0.00478355 Jy
! Component: 2450  -  total flux cleaned = 0.00486469 Jy
! Component: 2500  -  total flux cleaned = 0.00489688 Jy
! Component: 2550  -  total flux cleaned = 0.00481705 Jy
! Component: 2600  -  total flux cleaned = 0.00491261 Jy
! Component: 2650  -  total flux cleaned = 0.0049125 Jy
! Component: 2700  -  total flux cleaned = 0.00494377 Jy
! Component: 2750  -  total flux cleaned = 0.00492819 Jy
! Component: 2800  -  total flux cleaned = 0.00495937 Jy
! Component: 2850  -  total flux cleaned = 0.00494409 Jy
! Component: 2900  -  total flux cleaned = 0.00500529 Jy
! Component: 2950  -  total flux cleaned = 0.00509653 Jy
! Component: 3000  -  total flux cleaned = 0.00511174 Jy
! Component: 3050  -  total flux cleaned = 0.00515697 Jy
! Component: 3100  -  total flux cleaned = 0.00530666 Jy
! Component: 3150  -  total flux cleaned = 0.00539602 Jy
! Component: 3200  -  total flux cleaned = 0.005544 Jy
! Component: 3250  -  total flux cleaned = 0.00566171 Jy
! Component: 3300  -  total flux cleaned = 0.00574968 Jy
! Component: 3350  -  total flux cleaned = 0.00586621 Jy
! Component: 3400  -  total flux cleaned = 0.00601131 Jy
! Component: 3450  -  total flux cleaned = 0.0060402 Jy
! Component: 3500  -  total flux cleaned = 0.00621272 Jy
! Component: 3550  -  total flux cleaned = 0.00634126 Jy
! Component: 3600  -  total flux cleaned = 0.00638401 Jy
! Component: 3650  -  total flux cleaned = 0.00651158 Jy
! Component: 3700  -  total flux cleaned = 0.00666672 Jy
! Component: 3750  -  total flux cleaned = 0.00669473 Jy
! Component: 3800  -  total flux cleaned = 0.00680654 Jy
! Component: 3850  -  total flux cleaned = 0.00686213 Jy
! Component: 3900  -  total flux cleaned = 0.00695912 Jy
! Component: 3950  -  total flux cleaned = 0.00705566 Jy
! Component: 4000  -  total flux cleaned = 0.00717929 Jy
! Component: 4050  -  total flux cleaned = 0.00728867 Jy
! Total flux subtracted in 4096 components = 0.00731594 Jy
! Clean residual min=-0.001032 max=0.000751 Jy/beam
! Clean residual mean=0.000005 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.509758 Jy
keep
! Adding 285 model components to the UV plane model.
! The established model now contains 489 components and 0.509759 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsa_uvs/J1323+7942_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.643 x 10.52 at 0.571 degrees (North through East)
! Clean map  min=-0.0017673  max=0.3395 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1323+7942_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.3395 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000248456 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.219549 0.219549 0.439097 0.878195 1.75639 3.51278 7.02556 14.0511 28.1022 56.2045
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.339 
quit
! Quitting program
! Log file /g0/scr/pima/npcsa_uvs/J1323+7942_S_uvs.log closed on Sun Oct  6 10:33:48 2013