! Started logfile: /g0/scr/pima/npcsa_uvs/J1321+8316_X_uvs.log on Sun Oct 6 10:28:37 2013 obs /g0/scr/pima/npcsa_uvs/J1321+8316_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1321+8316_X_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.944444 visibilities/baseline/integration-bin. ! Found source: J1321+8316 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 9180 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1321+8316_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.021677Jy sigma=1.488485 ! Fit after self-cal, rms=0.844012Jy sigma=1.148488 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6045 mas, bmaj=2.849 mas, bpa=5.948 degrees ! Estimated noise=11.3027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135972 Jy ! Component: 100 - total flux cleaned = 0.166566 Jy ! Total flux subtracted in 100 components = 0.166566 Jy ! Clean residual min=-0.008914 max=0.013168 Jy/beam ! Clean residual mean=-0.000022 rms=0.002231 Jy/beam ! Combined flux in latest and established models = 0.166566 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.166566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095438Jy sigma=0.143154 ! Fit after self-cal, rms=0.095425Jy sigma=0.143106 ! Inverting map ! Added new window around map position (-1.2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147408 Jy ! Component: 100 - total flux cleaned = 0.0241315 Jy ! Total flux subtracted in 100 components = 0.0241315 Jy ! Clean residual min=-0.007971 max=0.008755 Jy/beam ! Clean residual mean=-0.000015 rms=0.001839 Jy/beam ! Combined flux in latest and established models = 0.190698 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 0.190698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093664Jy sigma=0.132916 ! Fit after self-cal, rms=0.093287Jy sigma=0.132569 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8536 mas, bmaj=3.011 mas, bpa=5.012 degrees ! Estimated noise=5.5594 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150022 Jy ! Component: 100 - total flux cleaned = 0.0228768 Jy ! Component: 150 - total flux cleaned = 0.0276912 Jy ! Component: 200 - total flux cleaned = 0.0308628 Jy ! Total flux subtracted in 200 components = 0.0308628 Jy ! Clean residual min=-0.006811 max=0.006144 Jy/beam ! Clean residual mean=-0.000017 rms=0.001559 Jy/beam ! Combined flux in latest and established models = 0.221561 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 0.221561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093092Jy sigma=0.125552 ! Fit after self-cal, rms=0.092769Jy sigma=0.125110 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 1.00 KP 1.02 ! LA 0.97 MK 1.00 NL 1.01 OV 0.99 ! PT 1.00 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.93 KP 0.91 ! LA 0.92 MK 0.91 NL 1.00 OV 0.97 ! PT 1.01 SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.94 KP 0.81 ! LA 0.92 MK 0.95 NL 0.96 OV 0.95 ! PT 0.99 SC 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.98 KP 0.87 ! LA 0.89 MK 0.89 NL 0.93 OV 1.00 ! PT 1.03 SC 0.93 ! ! ! Fit before self-cal, rms=0.092769Jy sigma=0.125110 ! Fit after self-cal, rms=0.088264Jy sigma=0.120033 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8429 mas, bmaj=3.01 mas, bpa=5.063 degrees ! Estimated noise=5.04336 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0124503 Jy ! Component: 100 - total flux cleaned = -0.0131269 Jy ! Component: 150 - total flux cleaned = -0.0126321 Jy ! Component: 200 - total flux cleaned = -0.0124004 Jy ! Total flux subtracted in 200 components = -0.0124004 Jy ! Clean residual min=-0.003691 max=0.004541 Jy/beam ! Clean residual mean=-0.000017 rms=0.001023 Jy/beam ! Combined flux in latest and established models = 0.20916 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.20916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083021Jy sigma=0.122069 ! Fit after self-cal, rms=0.082993Jy sigma=0.121978 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082993Jy sigma=0.121978 ! Fit after self-cal, rms=0.080482Jy sigma=0.119744 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8346 mas, bmaj=3.007 mas, bpa=5.108 degrees ! Estimated noise=4.63916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0112044 Jy ! Component: 100 - total flux cleaned = -0.0130064 Jy ! Component: 150 - total flux cleaned = -0.0128464 Jy ! Component: 200 - total flux cleaned = -0.0127137 Jy ! Total flux subtracted in 200 components = -0.0127137 Jy ! Clean residual min=-0.003265 max=0.004237 Jy/beam ! Clean residual mean=-0.000016 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.196447 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.196447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075873Jy sigma=0.121894 ! Fit after self-cal, rms=0.075846Jy sigma=0.121862 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.4, -26.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00410274 Jy ! Component: 100 - total flux cleaned = 0.00655769 Jy ! Component: 150 - total flux cleaned = 0.00835541 Jy ! Component: 200 - total flux cleaned = 0.0093901 Jy ! Total flux subtracted in 200 components = 0.0093901 Jy ! Clean residual min=-0.002970 max=0.003093 Jy/beam ! Clean residual mean=-0.000010 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 0.205837 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 81 components and 0.205837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075586Jy sigma=0.121338 ! Fit after self-cal, rms=0.075553Jy sigma=0.121291 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075553Jy sigma=0.121291 ! Fit after self-cal, rms=0.073271Jy sigma=0.119022 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8272 mas, bmaj=3.005 mas, bpa=5.167 degrees ! Estimated noise=4.26565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.010094 Jy ! Component: 100 - total flux cleaned = -0.0114263 Jy ! Component: 150 - total flux cleaned = -0.0109023 Jy ! Component: 200 - total flux cleaned = -0.0102943 Jy ! Total flux subtracted in 200 components = -0.0102943 Jy ! Clean residual min=-0.002503 max=0.002761 Jy/beam ! Clean residual mean=-0.000009 rms=0.000592 Jy/beam ! Combined flux in latest and established models = 0.195542 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.195542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069199Jy sigma=0.121084 ! Fit after self-cal, rms=0.069179Jy sigma=0.121054 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-19, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187065 Jy ! Component: 100 - total flux cleaned = 0.00255673 Jy ! Component: 150 - total flux cleaned = 0.00306603 Jy ! Component: 200 - total flux cleaned = 0.00348577 Jy ! Total flux subtracted in 200 components = 0.00348577 Jy ! Clean residual min=-0.002334 max=0.002209 Jy/beam ! Clean residual mean=-0.000006 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.199028 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 108 components and 0.199028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069039Jy sigma=0.120913 ! Fit after self-cal, rms=0.069031Jy sigma=0.120896 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069031Jy sigma=0.120896 ! Fit after self-cal, rms=0.067035Jy sigma=0.118709 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.191 mas, bmaj=3.541 mas, bpa=2.476 degrees ! Estimated noise=4.74696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00868145 Jy ! Component: 100 - total flux cleaned = -0.00968486 Jy ! Component: 150 - total flux cleaned = -0.0090425 Jy ! Component: 200 - total flux cleaned = -0.00861253 Jy ! Total flux subtracted in 200 components = -0.00861253 Jy ! Clean residual min=-0.002064 max=0.002676 Jy/beam ! Clean residual mean=-0.000010 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.190416 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 124 components and 0.190416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063776Jy sigma=0.120530 ! Fit after self-cal, rms=0.063746Jy sigma=0.120464 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000705341 Jy ! Component: 100 - total flux cleaned = 0.00087302 Jy ! Component: 150 - total flux cleaned = 0.000897813 Jy ! Component: 200 - total flux cleaned = 0.00096632 Jy ! Total flux subtracted in 200 components = 0.00096632 Jy ! Clean residual min=-0.002114 max=0.002518 Jy/beam ! Clean residual mean=-0.000008 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.191382 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 140 components and 0.191382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063700Jy sigma=0.120524 ! Fit after self-cal, rms=0.063700Jy sigma=0.120521 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8196 mas, bmaj=3.002 mas, bpa=5.227 degrees ! Estimated noise=3.92864 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8196 x 3.002 at 5.227 degrees (North through East) ! Clean map min=-0.001759 max=0.12664 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.5865 mas, bmaj=2.874 mas, bpa=6.074 degrees ! Estimated noise=7.66448 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0916764 Jy ! Component: 100 - total flux cleaned = 0.116739 Jy ! Component: 150 - total flux cleaned = 0.130914 Jy ! Component: 200 - total flux cleaned = 0.14043 Jy ! Total flux subtracted in 200 components = 0.14043 Jy ! Clean residual min=-0.005019 max=0.005556 Jy/beam ! Clean residual mean=-0.000014 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 0.14043 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.14043 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8196 mas, bmaj=3.002 mas, bpa=5.227 degrees ! Estimated noise=3.92864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135093 Jy ! Component: 100 - total flux cleaned = 0.0207106 Jy ! Component: 150 - total flux cleaned = 0.0255766 Jy ! Component: 200 - total flux cleaned = 0.0294111 Jy ! Total flux subtracted in 200 components = 0.0294111 Jy ! Clean residual min=-0.002668 max=0.003282 Jy/beam ! Clean residual mean=-0.000020 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.169841 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 53 components and 0.169841 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.191 mas, bmaj=3.541 mas, bpa=2.476 degrees ! Estimated noise=4.74696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00550554 Jy ! Component: 100 - total flux cleaned = 0.00923046 Jy ! Component: 150 - total flux cleaned = 0.0120398 Jy ! Component: 200 - total flux cleaned = 0.0142113 Jy ! Total flux subtracted in 200 components = 0.0142113 Jy ! Clean residual min=-0.002640 max=0.002849 Jy/beam ! Clean residual mean=-0.000020 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.184052 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170754 Jy ! Component: 100 - total flux cleaned = 0.00308014 Jy ! Component: 150 - total flux cleaned = 0.00414791 Jy ! Component: 200 - total flux cleaned = 0.0048064 Jy ! Total flux subtracted in 200 components = 0.0048064 Jy ! Clean residual min=-0.002291 max=0.002569 Jy/beam ! Clean residual mean=-0.000012 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.188859 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 117 components and 0.188859 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8196 mas, bmaj=3.002 mas, bpa=5.227 degrees ! Estimated noise=3.92864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184445 Jy ! Component: 100 - total flux cleaned = 0.000375805 Jy ! Component: 150 - total flux cleaned = 0.000649713 Jy ! Component: 200 - total flux cleaned = 0.00086874 Jy ! Total flux subtracted in 200 components = 0.00086874 Jy ! Clean residual min=-0.002004 max=0.001982 Jy/beam ! Clean residual mean=-0.000005 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.189727 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 142 components and 0.189727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063105Jy sigma=0.121150 ! Fit after self-cal, rms=0.063099Jy sigma=0.121129 wmodel /g0/scr/pima/npcsa_uvs/J1321+8316_X_map.mod ! Writing 142 model components to file: /g0/scr/pima/npcsa_uvs/J1321+8316_X_map.mod wobs /g0/scr/pima/npcsa_uvs/J1321+8316_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1321+8316_X_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1321+8316_X_map.win ! wwins: Wrote 4 windows to /g0/scr/pima/npcsa_uvs/J1321+8316_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000511101 Jy ! Component: 100 - total flux cleaned = -0.000936613 Jy ! Component: 150 - total flux cleaned = -0.00108836 Jy ! Component: 200 - total flux cleaned = -0.00120317 Jy ! Component: 250 - total flux cleaned = -0.00134018 Jy ! Component: 300 - total flux cleaned = -0.00147294 Jy ! Component: 350 - total flux cleaned = -0.00162762 Jy ! Component: 400 - total flux cleaned = -0.00175239 Jy ! Component: 450 - total flux cleaned = -0.00182537 Jy ! Component: 500 - total flux cleaned = -0.00182509 Jy ! Component: 550 - total flux cleaned = -0.00177877 Jy ! Component: 600 - total flux cleaned = -0.00180219 Jy ! Component: 650 - total flux cleaned = -0.00182476 Jy ! Component: 700 - total flux cleaned = -0.0018472 Jy ! Component: 750 - total flux cleaned = -0.00186945 Jy ! Component: 800 - total flux cleaned = -0.00204197 Jy ! Component: 850 - total flux cleaned = -0.00206301 Jy ! Component: 900 - total flux cleaned = -0.00218849 Jy ! Component: 950 - total flux cleaned = -0.00218804 Jy ! Component: 1000 - total flux cleaned = -0.00216749 Jy ! Component: 1050 - total flux cleaned = -0.00220783 Jy ! Component: 1100 - total flux cleaned = -0.00218777 Jy ! Component: 1150 - total flux cleaned = -0.00222736 Jy ! Component: 1200 - total flux cleaned = -0.00228591 Jy ! Component: 1250 - total flux cleaned = -0.00232454 Jy ! Component: 1300 - total flux cleaned = -0.0023057 Jy ! Component: 1350 - total flux cleaned = -0.00228693 Jy ! Component: 1400 - total flux cleaned = -0.00230581 Jy ! Component: 1450 - total flux cleaned = -0.00232425 Jy ! Component: 1500 - total flux cleaned = -0.0023059 Jy ! Component: 1550 - total flux cleaned = -0.00234244 Jy ! Component: 1600 - total flux cleaned = -0.00232441 Jy ! Component: 1650 - total flux cleaned = -0.00234242 Jy ! Component: 1700 - total flux cleaned = -0.00237827 Jy ! Component: 1750 - total flux cleaned = -0.00248428 Jy ! Component: 1800 - total flux cleaned = -0.00251944 Jy ! Component: 1850 - total flux cleaned = -0.00257165 Jy ! Component: 1900 - total flux cleaned = -0.00260618 Jy ! Component: 1950 - total flux cleaned = -0.00267485 Jy ! Component: 2000 - total flux cleaned = -0.00267509 Jy ! Component: 2050 - total flux cleaned = -0.00279363 Jy ! Component: 2100 - total flux cleaned = -0.00277695 Jy ! Component: 2150 - total flux cleaned = -0.00286059 Jy ! Component: 2200 - total flux cleaned = -0.00289379 Jy ! Component: 2250 - total flux cleaned = -0.00297623 Jy ! Component: 2300 - total flux cleaned = -0.00297604 Jy ! Component: 2350 - total flux cleaned = -0.00305753 Jy ! Component: 2400 - total flux cleaned = -0.00305762 Jy ! Component: 2450 - total flux cleaned = -0.00310597 Jy ! Component: 2500 - total flux cleaned = -0.00312201 Jy ! Component: 2550 - total flux cleaned = -0.00313781 Jy ! Component: 2600 - total flux cleaned = -0.00318507 Jy ! Component: 2650 - total flux cleaned = -0.00318508 Jy ! Component: 2700 - total flux cleaned = -0.00321627 Jy ! Component: 2750 - total flux cleaned = -0.00330947 Jy ! Component: 2800 - total flux cleaned = -0.00337141 Jy ! Component: 2850 - total flux cleaned = -0.00343279 Jy ! Component: 2900 - total flux cleaned = -0.00350911 Jy ! Component: 2950 - total flux cleaned = -0.00356992 Jy ! Component: 3000 - total flux cleaned = -0.00358509 Jy ! Component: 3050 - total flux cleaned = -0.00361523 Jy ! Component: 3100 - total flux cleaned = -0.00367509 Jy ! Component: 3150 - total flux cleaned = -0.00377923 Jy ! Component: 3200 - total flux cleaned = -0.00383846 Jy ! Component: 3250 - total flux cleaned = -0.00392694 Jy ! Component: 3300 - total flux cleaned = -0.00400026 Jy ! Component: 3350 - total flux cleaned = -0.00407315 Jy ! Component: 3400 - total flux cleaned = -0.00414575 Jy ! Component: 3450 - total flux cleaned = -0.00427581 Jy ! Component: 3500 - total flux cleaned = -0.00429019 Jy ! Component: 3550 - total flux cleaned = -0.00437601 Jy ! Component: 3600 - total flux cleaned = -0.00441888 Jy ! Component: 3650 - total flux cleaned = -0.00451817 Jy ! Component: 3700 - total flux cleaned = -0.0045464 Jy ! Component: 3750 - total flux cleaned = -0.00468683 Jy ! Component: 3800 - total flux cleaned = -0.00463083 Jy ! Component: 3850 - total flux cleaned = -0.00477013 Jy ! Component: 3900 - total flux cleaned = -0.00481166 Jy ! Component: 3950 - total flux cleaned = -0.00485296 Jy ! Component: 4000 - total flux cleaned = -0.00485302 Jy ! Component: 4050 - total flux cleaned = -0.00498987 Jy ! Total flux subtracted in 4096 components = -0.00503062 Jy ! Clean residual min=-0.000834 max=0.000805 Jy/beam ! Clean residual mean=-0.000001 rms=0.000241 Jy/beam ! Combined flux in latest and established models = 0.184697 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 446 components and 0.184697 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1321+8316_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8196 x 3.002 at 5.227 degrees (North through East) ! Clean map min=-0.0014488 max=0.12576 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1321+8316_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.125755 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240525 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.573794 0.573794 1.14759 2.29517 4.59035 9.1807 18.3614 36.7228 73.4456 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.125 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1321+8316_X_uvs.log closed on Sun Oct 6 10:28:42 2013