! Started logfile: /g0/scr/pima/npcsa_uvs/J1321+8316_S_uvs.log on Sun Oct 6 10:33:39 2013 obs /g0/scr/pima/npcsa_uvs/J1321+8316_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1321+8316_S_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.944444 visibilities/baseline/integration-bin. ! Found source: J1321+8316 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 9180 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1321+8316_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.023844Jy sigma=1.444410 ! Fit after self-cal, rms=0.849047Jy sigma=1.082608 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.389 mas, bmaj=10.36 mas, bpa=5.652 degrees ! Estimated noise=14.9576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132222 Jy ! Component: 100 - total flux cleaned = 0.173059 Jy ! Total flux subtracted in 100 components = 0.173059 Jy ! Clean residual min=-0.013959 max=0.022484 Jy/beam ! Clean residual mean=-0.000025 rms=0.004502 Jy/beam ! Combined flux in latest and established models = 0.173059 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.173059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114401Jy sigma=0.184359 ! Fit after self-cal, rms=0.114267Jy sigma=0.184079 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=11.19 mas, bpa=4.655 degrees ! Estimated noise=5.89208 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0379058 Jy ! Component: 100 - total flux cleaned = 0.0539431 Jy ! Component: 150 - total flux cleaned = 0.0633535 Jy ! Component: 200 - total flux cleaned = 0.0693472 Jy ! Total flux subtracted in 200 components = 0.0693472 Jy ! Clean residual min=-0.013274 max=0.024809 Jy/beam ! Clean residual mean=-0.000007 rms=0.005343 Jy/beam ! Combined flux in latest and established models = 0.242406 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 59 components and 0.242406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112756Jy sigma=0.156013 ! Fit after self-cal, rms=0.112722Jy sigma=0.155809 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.85 HN 0.98 KP 0.97 ! LA 0.98 MK 0.84 NL 1.13 OV 0.96 ! PT 1.00 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.90 HN 1.03 KP 0.95 ! LA 0.98 MK 0.92 NL 1.11 OV 0.94 ! PT 0.97 SC 0.87 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.92 HN 0.95 KP 0.95 ! LA 0.81 MK 1.00 NL 1.19 OV 1.05 ! PT 1.06 SC 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.89 HN 0.87 KP 0.91 ! LA 0.68 MK 1.00 NL 1.07 OV 0.89 ! PT 0.92 SC 0.94 ! ! ! Fit before self-cal, rms=0.112722Jy sigma=0.155809 ! Fit after self-cal, rms=0.103398Jy sigma=0.142699 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=11.19 mas, bpa=4.766 degrees ! Estimated noise=5.24122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0156422 Jy ! Component: 100 - total flux cleaned = -0.0191569 Jy ! Component: 150 - total flux cleaned = -0.0193098 Jy ! Component: 200 - total flux cleaned = -0.0195266 Jy ! Total flux subtracted in 200 components = -0.0195266 Jy ! Clean residual min=-0.010306 max=0.020103 Jy/beam ! Clean residual mean=-0.000001 rms=0.004044 Jy/beam ! Combined flux in latest and established models = 0.22288 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.22288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097037Jy sigma=0.145516 ! Fit after self-cal, rms=0.097139Jy sigma=0.145309 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097139Jy sigma=0.145309 ! Fit after self-cal, rms=0.093101Jy sigma=0.142223 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.348 mas, bmaj=11.19 mas, bpa=4.877 degrees ! Estimated noise=4.74044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0138206 Jy ! Component: 100 - total flux cleaned = -0.0173493 Jy ! Component: 150 - total flux cleaned = -0.0184469 Jy ! Component: 200 - total flux cleaned = -0.0185568 Jy ! Total flux subtracted in 200 components = -0.0185568 Jy ! Clean residual min=-0.009205 max=0.017839 Jy/beam ! Clean residual mean=-0.000001 rms=0.003622 Jy/beam ! Combined flux in latest and established models = 0.204323 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.204323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087512Jy sigma=0.145149 ! Fit after self-cal, rms=0.087506Jy sigma=0.145060 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27, -27.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173707 Jy ! Component: 100 - total flux cleaned = 0.0261964 Jy ! Component: 150 - total flux cleaned = 0.0308907 Jy ! Component: 200 - total flux cleaned = 0.0309079 Jy ! Total flux subtracted in 200 components = 0.0309079 Jy ! Clean residual min=-0.006657 max=0.011975 Jy/beam ! Clean residual mean=0.000010 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 0.235231 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 105 components and 0.235231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084377Jy sigma=0.137466 ! Fit after self-cal, rms=0.084118Jy sigma=0.136637 ! Inverting map ! Added new window around map position (-9.5, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105378 Jy ! Component: 100 - total flux cleaned = 0.0149857 Jy ! Component: 150 - total flux cleaned = 0.0173867 Jy ! Component: 200 - total flux cleaned = 0.019399 Jy ! Total flux subtracted in 200 components = 0.019399 Jy ! Clean residual min=-0.005673 max=0.005834 Jy/beam ! Clean residual mean=0.000017 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.25463 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 159 components and 0.25463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082470Jy sigma=0.133509 ! Fit after self-cal, rms=0.082180Jy sigma=0.133178 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082180Jy sigma=0.133178 ! Fit after self-cal, rms=0.077953Jy sigma=0.130098 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.277 mas, bmaj=11.17 mas, bpa=4.798 degrees ! Estimated noise=4.29057 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0108981 Jy ! Component: 100 - total flux cleaned = -0.00954784 Jy ! Component: 150 - total flux cleaned = -0.00834308 Jy ! Component: 200 - total flux cleaned = -0.00732952 Jy ! Total flux subtracted in 200 components = -0.00732952 Jy ! Clean residual min=-0.004613 max=0.004678 Jy/beam ! Clean residual mean=0.000016 rms=0.001247 Jy/beam ! Combined flux in latest and established models = 0.2473 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 183 components and 0.2473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073526Jy sigma=0.131478 ! Fit after self-cal, rms=0.073462Jy sigma=0.131397 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113924 Jy ! Component: 100 - total flux cleaned = 0.00186877 Jy ! Component: 150 - total flux cleaned = 0.00227293 Jy ! Component: 200 - total flux cleaned = 0.00249362 Jy ! Total flux subtracted in 200 components = 0.00249362 Jy ! Clean residual min=-0.004483 max=0.004542 Jy/beam ! Clean residual mean=0.000017 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.249794 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 206 components and 0.249794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073080Jy sigma=0.131220 ! Fit after self-cal, rms=0.073044Jy sigma=0.131197 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073044Jy sigma=0.131197 ! Fit after self-cal, rms=0.070275Jy sigma=0.129044 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.023 mas, bmaj=12.85 mas, bpa=4.848 degrees ! Estimated noise=4.41313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00910842 Jy ! Component: 100 - total flux cleaned = -0.010242 Jy ! Component: 150 - total flux cleaned = -0.0107724 Jy ! Component: 200 - total flux cleaned = -0.0112219 Jy ! Total flux subtracted in 200 components = -0.0112219 Jy ! Clean residual min=-0.005003 max=0.005160 Jy/beam ! Clean residual mean=0.000027 rms=0.001631 Jy/beam ! Combined flux in latest and established models = 0.238572 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 235 components and 0.238572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067101Jy sigma=0.130682 ! Fit after self-cal, rms=0.067062Jy sigma=0.130620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131034 Jy ! Component: 100 - total flux cleaned = -0.000395 Jy ! Component: 150 - total flux cleaned = -0.000573041 Jy ! Component: 200 - total flux cleaned = -0.000518028 Jy ! Total flux subtracted in 200 components = -0.000518028 Jy ! Clean residual min=-0.005016 max=0.004725 Jy/beam ! Clean residual mean=0.000027 rms=0.001583 Jy/beam ! Combined flux in latest and established models = 0.238054 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 250 components and 0.238054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067095Jy sigma=0.130567 ! Fit after self-cal, rms=0.067076Jy sigma=0.130551 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=11.15 mas, bpa=4.769 degrees ! Estimated noise=3.94434 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.225 x 11.15 at 4.769 degrees (North through East) ! Clean map min=-0.0037566 max=0.12737 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.284 mas, bmaj=10.4 mas, bpa=5.764 degrees ! Estimated noise=9.54168 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0850412 Jy ! Component: 100 - total flux cleaned = 0.115676 Jy ! Component: 150 - total flux cleaned = 0.132947 Jy ! Component: 200 - total flux cleaned = 0.145214 Jy ! Total flux subtracted in 200 components = 0.145214 Jy ! Clean residual min=-0.007661 max=0.013047 Jy/beam ! Clean residual mean=-0.000011 rms=0.002322 Jy/beam ! Combined flux in latest and established models = 0.145214 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.145214 Jy ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=11.15 mas, bpa=4.769 degrees ! Estimated noise=3.94434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209021 Jy ! Component: 100 - total flux cleaned = 0.0350554 Jy ! Component: 150 - total flux cleaned = 0.0457278 Jy ! Component: 200 - total flux cleaned = 0.0540776 Jy ! Total flux subtracted in 200 components = 0.0540776 Jy ! Clean residual min=-0.006310 max=0.006531 Jy/beam ! Clean residual mean=0.000001 rms=0.001991 Jy/beam ! Combined flux in latest and established models = 0.199292 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 111 components and 0.199292 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.023 mas, bmaj=12.85 mas, bpa=4.848 degrees ! Estimated noise=4.41313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117276 Jy ! Component: 100 - total flux cleaned = 0.019602 Jy ! Component: 150 - total flux cleaned = 0.0246373 Jy ! Component: 200 - total flux cleaned = 0.0272535 Jy ! Total flux subtracted in 200 components = 0.0272535 Jy ! Clean residual min=-0.006393 max=0.004935 Jy/beam ! Clean residual mean=0.000019 rms=0.001802 Jy/beam ! Combined flux in latest and established models = 0.226545 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208653 Jy ! Component: 100 - total flux cleaned = 0.00388138 Jy ! Component: 150 - total flux cleaned = 0.00534557 Jy ! Component: 200 - total flux cleaned = 0.00627593 Jy ! Total flux subtracted in 200 components = 0.00627593 Jy ! Clean residual min=-0.005780 max=0.004600 Jy/beam ! Clean residual mean=0.000023 rms=0.001561 Jy/beam ! Combined flux in latest and established models = 0.232821 Jy ! Adding 110 model components to the UV plane model. ! The established model now contains 211 components and 0.232821 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=11.15 mas, bpa=4.769 degrees ! Estimated noise=3.94434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000486002 Jy ! Component: 100 - total flux cleaned = 3.03719e-05 Jy ! Component: 150 - total flux cleaned = 0.00061841 Jy ! Component: 200 - total flux cleaned = 0.00109541 Jy ! Total flux subtracted in 200 components = 0.00109541 Jy ! Clean residual min=-0.004074 max=0.003346 Jy/beam ! Clean residual mean=0.000012 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.233917 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 245 components and 0.233917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066204Jy sigma=0.131156 ! Fit after self-cal, rms=0.066085Jy sigma=0.130932 wmodel /g0/scr/pima/npcsa_uvs/J1321+8316_S_map.mod ! Writing 245 model components to file: /g0/scr/pima/npcsa_uvs/J1321+8316_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J1321+8316_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1321+8316_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1321+8316_S_map.win ! wwins: Wrote 4 windows to /g0/scr/pima/npcsa_uvs/J1321+8316_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136665 Jy ! Component: 100 - total flux cleaned = -0.00159832 Jy ! Component: 150 - total flux cleaned = -0.0014427 Jy ! Component: 200 - total flux cleaned = -0.0011493 Jy ! Component: 250 - total flux cleaned = -0.000917323 Jy ! Component: 300 - total flux cleaned = -0.000740858 Jy ! Component: 350 - total flux cleaned = -0.000613555 Jy ! Component: 400 - total flux cleaned = -0.000653504 Jy ! Component: 450 - total flux cleaned = -0.000691175 Jy ! Component: 500 - total flux cleaned = -0.000651928 Jy ! Component: 550 - total flux cleaned = -0.000542846 Jy ! Component: 600 - total flux cleaned = -0.000507853 Jy ! Component: 650 - total flux cleaned = -0.000474327 Jy ! Component: 700 - total flux cleaned = -0.000474856 Jy ! Component: 750 - total flux cleaned = -0.000441953 Jy ! Component: 800 - total flux cleaned = -0.000472706 Jy ! Component: 850 - total flux cleaned = -0.000411633 Jy ! Component: 900 - total flux cleaned = -0.000470979 Jy ! Component: 950 - total flux cleaned = -0.000471508 Jy ! Component: 1000 - total flux cleaned = -0.000528627 Jy ! Component: 1050 - total flux cleaned = -0.000528862 Jy ! Component: 1100 - total flux cleaned = -0.0006112 Jy ! Component: 1150 - total flux cleaned = -0.000611038 Jy ! Component: 1200 - total flux cleaned = -0.000610859 Jy ! Component: 1250 - total flux cleaned = -0.000585712 Jy ! Component: 1300 - total flux cleaned = -0.000561219 Jy ! Component: 1350 - total flux cleaned = -0.000537087 Jy ! Component: 1400 - total flux cleaned = -0.000586446 Jy ! Component: 1450 - total flux cleaned = -0.000634289 Jy ! Component: 1500 - total flux cleaned = -0.000634598 Jy ! Component: 1550 - total flux cleaned = -0.000680616 Jy ! Component: 1600 - total flux cleaned = -0.000703291 Jy ! Component: 1650 - total flux cleaned = -0.000748726 Jy ! Component: 1700 - total flux cleaned = -0.000748819 Jy ! Component: 1750 - total flux cleaned = -0.000814264 Jy ! Component: 1800 - total flux cleaned = -0.000856891 Jy ! Component: 1850 - total flux cleaned = -0.000856808 Jy ! Component: 1900 - total flux cleaned = -0.000856909 Jy ! Component: 1950 - total flux cleaned = -0.000918647 Jy ! Component: 2000 - total flux cleaned = -0.000958865 Jy ! Component: 2050 - total flux cleaned = -0.00097861 Jy ! Component: 2100 - total flux cleaned = -0.000998647 Jy ! Component: 2150 - total flux cleaned = -0.00105708 Jy ! Component: 2200 - total flux cleaned = -0.00109549 Jy ! Component: 2250 - total flux cleaned = -0.00113307 Jy ! Component: 2300 - total flux cleaned = -0.00115175 Jy ! Component: 2350 - total flux cleaned = -0.00128123 Jy ! Component: 2400 - total flux cleaned = -0.00128101 Jy ! Component: 2450 - total flux cleaned = -0.00138977 Jy ! Component: 2500 - total flux cleaned = -0.00146141 Jy ! Component: 2550 - total flux cleaned = -0.00162087 Jy ! Component: 2600 - total flux cleaned = -0.00177869 Jy ! Component: 2650 - total flux cleaned = -0.00183073 Jy ! Component: 2700 - total flux cleaned = -0.00198548 Jy ! Component: 2750 - total flux cleaned = -0.00210464 Jy ! Component: 2800 - total flux cleaned = -0.00222281 Jy ! Component: 2850 - total flux cleaned = -0.00238995 Jy ! Component: 2900 - total flux cleaned = -0.00255531 Jy ! Component: 2950 - total flux cleaned = -0.0026698 Jy ! Component: 3000 - total flux cleaned = -0.00278337 Jy ! Component: 3050 - total flux cleaned = -0.00289612 Jy ! Component: 3100 - total flux cleaned = -0.002992 Jy ! Component: 3150 - total flux cleaned = -0.00318169 Jy ! Component: 3200 - total flux cleaned = -0.00324446 Jy ! Component: 3250 - total flux cleaned = -0.00338418 Jy ! Component: 3300 - total flux cleaned = -0.0034766 Jy ! Component: 3350 - total flux cleaned = -0.00359881 Jy ! Component: 3400 - total flux cleaned = -0.00368963 Jy ! Component: 3450 - total flux cleaned = -0.00382479 Jy ! Component: 3500 - total flux cleaned = -0.00392888 Jy ! Component: 3550 - total flux cleaned = -0.00398797 Jy ! Component: 3600 - total flux cleaned = -0.00404682 Jy ! Component: 3650 - total flux cleaned = -0.00416345 Jy ! Component: 3700 - total flux cleaned = -0.00427918 Jy ! Component: 3750 - total flux cleaned = -0.00436537 Jy ! Component: 3800 - total flux cleaned = -0.00437965 Jy ! Component: 3850 - total flux cleaned = -0.00442236 Jy ! Component: 3900 - total flux cleaned = -0.00457761 Jy ! Component: 3950 - total flux cleaned = -0.00459166 Jy ! Component: 4000 - total flux cleaned = -0.00464751 Jy ! Component: 4050 - total flux cleaned = -0.00477225 Jy ! Total flux subtracted in 4096 components = -0.00482742 Jy ! Clean residual min=-0.000813 max=0.000813 Jy/beam ! Clean residual mean=0.000004 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.229089 Jy keep ! Adding 393 model components to the UV plane model. ! The established model now contains 638 components and 0.229089 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1321+8316_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.225 x 11.15 at 4.769 degrees (North through East) ! Clean map min=-0.0030459 max=0.12666 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1321+8316_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126663 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000257405 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.60966 0.60966 1.21932 2.43864 4.87728 9.75456 19.5091 39.0182 78.0365 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.126 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1321+8316_S_uvs.log closed on Sun Oct 6 10:33:43 2013