! Started logfile: /g0/scr/pima/npcsa_uvs/J1306+8019_S_uvs.log on Sun Oct 6 10:33:28 2013 obs /g0/scr/pima/npcsa_uvs/J1306+8019_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1306+8019_S_uva.fits ! AN table 1: 54 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.688889 visibilities/baseline/integration-bin. ! Found source: J1306+8019 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 6696 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1306+8019_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003769Jy sigma=0.943142 ! Fit after self-cal, rms=0.923785Jy sigma=0.814765 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.173 mas, bmaj=9.447 mas, bpa=-4.542 degrees ! Estimated noise=24.5222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0779488 Jy ! Component: 100 - total flux cleaned = 0.101391 Jy ! Total flux subtracted in 100 components = 0.101391 Jy ! Clean residual min=-0.011931 max=0.016085 Jy/beam ! Clean residual mean=0.000011 rms=0.003603 Jy/beam ! Combined flux in latest and established models = 0.101391 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.101391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096087Jy sigma=0.105034 ! Fit after self-cal, rms=0.094975Jy sigma=0.104267 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.238 mas, bmaj=10.96 mas, bpa=-5.285 degrees ! Estimated noise=10.489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236408 Jy ! Component: 100 - total flux cleaned = 0.037505 Jy ! Component: 150 - total flux cleaned = 0.0460446 Jy ! Component: 200 - total flux cleaned = 0.0514526 Jy ! Total flux subtracted in 200 components = 0.0514526 Jy ! Clean residual min=-0.009521 max=0.011318 Jy/beam ! Clean residual mean=0.000016 rms=0.002864 Jy/beam ! Combined flux in latest and established models = 0.152844 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 94 components and 0.152844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095388Jy sigma=0.093409 ! Fit after self-cal, rms=0.095123Jy sigma=0.093232 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.90 HN 0.86 KP 0.99 ! LA 0.92 MK 0.63 NL 0.97 OV 1.03 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.94 HN 0.97 KP 0.99 ! LA 0.91 MK 0.84 NL 0.85 OV 0.97 ! PT 0.91 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.90 HN 0.89 KP 1.00 ! LA 0.70 MK 0.79 NL 1.09 OV 1.04 ! PT 0.98 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.91 HN 0.90 KP 0.99 ! LA 0.60 MK 0.81 NL 1.04 OV 0.87 ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.095123Jy sigma=0.093232 ! Fit after self-cal, rms=0.084313Jy sigma=0.085850 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.162 mas, bmaj=10.91 mas, bpa=-4.424 degrees ! Estimated noise=8.64624 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0143671 Jy ! Component: 100 - total flux cleaned = -0.0177874 Jy ! Component: 150 - total flux cleaned = -0.0191632 Jy ! Component: 200 - total flux cleaned = -0.0193953 Jy ! Total flux subtracted in 200 components = -0.0193953 Jy ! Clean residual min=-0.004595 max=0.008391 Jy/beam ! Clean residual mean=0.000005 rms=0.001662 Jy/beam ! Combined flux in latest and established models = 0.133448 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 105 components and 0.133448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077460Jy sigma=0.088343 ! Fit after self-cal, rms=0.077630Jy sigma=0.088164 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077630Jy sigma=0.088164 ! Fit after self-cal, rms=0.070681Jy sigma=0.085597 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.053 mas, bmaj=10.78 mas, bpa=-3.873 degrees ! Estimated noise=7.22044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0117193 Jy ! Component: 100 - total flux cleaned = -0.0146295 Jy ! Component: 150 - total flux cleaned = -0.0160936 Jy ! Component: 200 - total flux cleaned = -0.0169416 Jy ! Total flux subtracted in 200 components = -0.0169416 Jy ! Clean residual min=-0.003716 max=0.006907 Jy/beam ! Clean residual mean=0.000004 rms=0.001376 Jy/beam ! Combined flux in latest and established models = 0.116507 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 0.116507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065139Jy sigma=0.088077 ! Fit after self-cal, rms=0.065121Jy sigma=0.088054 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, -50). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00674107 Jy ! Component: 100 - total flux cleaned = 0.00996582 Jy ! Component: 150 - total flux cleaned = 0.010959 Jy ! Component: 200 - total flux cleaned = 0.0117606 Jy ! Total flux subtracted in 200 components = 0.0117606 Jy ! Clean residual min=-0.003087 max=0.003404 Jy/beam ! Clean residual mean=0.000003 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.128267 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 147 components and 0.128267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064366Jy sigma=0.087135 ! Fit after self-cal, rms=0.064070Jy sigma=0.086834 ! Inverting map ! Added new window around map position (-17, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039488 Jy ! Component: 100 - total flux cleaned = 0.00594306 Jy ! Component: 150 - total flux cleaned = 0.00716549 Jy ! Component: 200 - total flux cleaned = 0.00810295 Jy ! Total flux subtracted in 200 components = 0.00810295 Jy ! Clean residual min=-0.002528 max=0.002656 Jy/beam ! Clean residual mean=0.000004 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.13637 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 184 components and 0.13637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063787Jy sigma=0.086288 ! Fit after self-cal, rms=0.063695Jy sigma=0.086210 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063695Jy sigma=0.086210 ! Fit after self-cal, rms=0.057500Jy sigma=0.083448 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.961 mas, bmaj=10.7 mas, bpa=-4.052 degrees ! Estimated noise=6.00788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00968955 Jy ! Component: 100 - total flux cleaned = -0.0114317 Jy ! Component: 150 - total flux cleaned = -0.0114495 Jy ! Component: 200 - total flux cleaned = -0.011394 Jy ! Total flux subtracted in 200 components = -0.011394 Jy ! Clean residual min=-0.001816 max=0.001993 Jy/beam ! Clean residual mean=0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.124976 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 199 components and 0.124976 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052955Jy sigma=0.085565 ! Fit after self-cal, rms=0.052887Jy sigma=0.085519 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776561 Jy ! Component: 100 - total flux cleaned = 0.000814424 Jy ! Component: 150 - total flux cleaned = 0.000782443 Jy ! Component: 200 - total flux cleaned = 0.000752658 Jy ! Total flux subtracted in 200 components = 0.000752658 Jy ! Clean residual min=-0.001659 max=0.002009 Jy/beam ! Clean residual mean=0.000001 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.125729 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 222 components and 0.125729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052767Jy sigma=0.085531 ! Fit after self-cal, rms=0.052760Jy sigma=0.085524 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052760Jy sigma=0.085524 ! Fit after self-cal, rms=0.048275Jy sigma=0.083187 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.001 mas, bmaj=12.59 mas, bpa=-4.176 degrees ! Estimated noise=5.62284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00836483 Jy ! Component: 100 - total flux cleaned = -0.0107169 Jy ! Component: 150 - total flux cleaned = -0.0119593 Jy ! Component: 200 - total flux cleaned = -0.0125954 Jy ! Total flux subtracted in 200 components = -0.0125954 Jy ! Clean residual min=-0.001592 max=0.001913 Jy/beam ! Clean residual mean=0.000002 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.113134 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 254 components and 0.113134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044558Jy sigma=0.085450 ! Fit after self-cal, rms=0.044535Jy sigma=0.085411 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.04667e-05 Jy ! Component: 100 - total flux cleaned = -0.00018948 Jy ! Component: 150 - total flux cleaned = -0.000234364 Jy ! Component: 200 - total flux cleaned = -0.00027431 Jy ! Total flux subtracted in 200 components = -0.00027431 Jy ! Clean residual min=-0.001592 max=0.001901 Jy/beam ! Clean residual mean=0.000002 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.112859 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 286 components and 0.112859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044460Jy sigma=0.085464 ! Fit after self-cal, rms=0.044466Jy sigma=0.085458 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.837 mas, bmaj=10.59 mas, bpa=-3.93 degrees ! Estimated noise=5.03418 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.837 x 10.59 at -3.93 degrees (North through East) ! Clean map min=-0.0015638 max=0.051117 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.935 mas, bmaj=9.212 mas, bpa=-2.915 degrees ! Estimated noise=11.138 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352645 Jy ! Component: 100 - total flux cleaned = 0.0490013 Jy ! Component: 150 - total flux cleaned = 0.0558436 Jy ! Component: 200 - total flux cleaned = 0.0617835 Jy ! Total flux subtracted in 200 components = 0.0617835 Jy ! Clean residual min=-0.004522 max=0.006077 Jy/beam ! Clean residual mean=0.000003 rms=0.001534 Jy/beam ! Combined flux in latest and established models = 0.0617835 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.0617835 Jy ! Inverting map and beam ! Estimated beam: bmin=4.837 mas, bmaj=10.59 mas, bpa=-3.93 degrees ! Estimated noise=5.03418 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967219 Jy ! Component: 100 - total flux cleaned = 0.0163829 Jy ! Component: 150 - total flux cleaned = 0.0216593 Jy ! Component: 200 - total flux cleaned = 0.0259323 Jy ! Total flux subtracted in 200 components = 0.0259323 Jy ! Clean residual min=-0.003353 max=0.003899 Jy/beam ! Clean residual mean=0.000007 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.0877158 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 111 components and 0.0877158 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.001 mas, bmaj=12.59 mas, bpa=-4.176 degrees ! Estimated noise=5.62284 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00505466 Jy ! Component: 100 - total flux cleaned = 0.00878751 Jy ! Component: 150 - total flux cleaned = 0.011735 Jy ! Component: 200 - total flux cleaned = 0.0140558 Jy ! Total flux subtracted in 200 components = 0.0140558 Jy ! Clean residual min=-0.003208 max=0.002635 Jy/beam ! Clean residual mean=0.000007 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.101772 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154139 Jy ! Component: 100 - total flux cleaned = 0.00286921 Jy ! Component: 150 - total flux cleaned = 0.00401902 Jy ! Component: 200 - total flux cleaned = 0.00496822 Jy ! Total flux subtracted in 200 components = 0.00496822 Jy ! Clean residual min=-0.002524 max=0.001952 Jy/beam ! Clean residual mean=0.000004 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.10674 Jy ! Adding 108 model components to the UV plane model. ! The established model now contains 197 components and 0.10674 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.837 mas, bmaj=10.59 mas, bpa=-3.93 degrees ! Estimated noise=5.03418 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000517447 Jy ! Component: 100 - total flux cleaned = 0.00102421 Jy ! Component: 150 - total flux cleaned = 0.00153896 Jy ! Component: 200 - total flux cleaned = 0.00198668 Jy ! Total flux subtracted in 200 components = 0.00198668 Jy ! Clean residual min=-0.001738 max=0.001551 Jy/beam ! Clean residual mean=0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.108726 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 222 components and 0.108726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044395Jy sigma=0.085844 ! Fit after self-cal, rms=0.044389Jy sigma=0.085804 wmodel /g0/scr/pima/npcsa_uvs/J1306+8019_S_map.mod ! Writing 222 model components to file: /g0/scr/pima/npcsa_uvs/J1306+8019_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J1306+8019_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1306+8019_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1306+8019_S_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsa_uvs/J1306+8019_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -9.65631e-05 Jy ! Component: 100 - total flux cleaned = -2.08281e-05 Jy ! Component: 150 - total flux cleaned = 0.000192188 Jy ! Component: 200 - total flux cleaned = 0.000259049 Jy ! Component: 250 - total flux cleaned = 0.00034362 Jy ! Component: 300 - total flux cleaned = 0.000486544 Jy ! Component: 350 - total flux cleaned = 0.00060416 Jy ! Component: 400 - total flux cleaned = 0.0007182 Jy ! Component: 450 - total flux cleaned = 0.000865062 Jy ! Component: 500 - total flux cleaned = 0.000954204 Jy ! Component: 550 - total flux cleaned = 0.00109214 Jy ! Component: 600 - total flux cleaned = 0.00117584 Jy ! Component: 650 - total flux cleaned = 0.00125754 Jy ! Component: 700 - total flux cleaned = 0.00133726 Jy ! Component: 750 - total flux cleaned = 0.00141519 Jy ! Component: 800 - total flux cleaned = 0.00143023 Jy ! Component: 850 - total flux cleaned = 0.00144512 Jy ! Component: 900 - total flux cleaned = 0.0014161 Jy ! Component: 950 - total flux cleaned = 0.00143049 Jy ! Component: 1000 - total flux cleaned = 0.0014443 Jy ! Component: 1050 - total flux cleaned = 0.0014717 Jy ! Component: 1100 - total flux cleaned = 0.00152498 Jy ! Component: 1150 - total flux cleaned = 0.00153775 Jy ! Component: 1200 - total flux cleaned = 0.00152483 Jy ! Component: 1250 - total flux cleaned = 0.00152504 Jy ! Component: 1300 - total flux cleaned = 0.00153734 Jy ! Component: 1350 - total flux cleaned = 0.00151289 Jy ! Component: 1400 - total flux cleaned = 0.00151288 Jy ! Component: 1450 - total flux cleaned = 0.00151287 Jy ! Component: 1500 - total flux cleaned = 0.0015129 Jy ! Component: 1550 - total flux cleaned = 0.00152426 Jy ! Component: 1600 - total flux cleaned = 0.00150179 Jy ! Component: 1650 - total flux cleaned = 0.00147973 Jy ! Component: 1700 - total flux cleaned = 0.00150172 Jy ! Component: 1750 - total flux cleaned = 0.00152327 Jy ! Component: 1800 - total flux cleaned = 0.00152314 Jy ! Component: 1850 - total flux cleaned = 0.00150208 Jy ! Component: 1900 - total flux cleaned = 0.00146076 Jy ! Component: 1950 - total flux cleaned = 0.00143003 Jy ! Component: 2000 - total flux cleaned = 0.00141987 Jy ! Component: 2050 - total flux cleaned = 0.00136974 Jy ! Component: 2100 - total flux cleaned = 0.00131022 Jy ! Component: 2150 - total flux cleaned = 0.00125141 Jy ! Component: 2200 - total flux cleaned = 0.00119335 Jy ! Component: 2250 - total flux cleaned = 0.00115499 Jy ! Component: 2300 - total flux cleaned = 0.00105992 Jy ! Component: 2350 - total flux cleaned = 0.000984586 Jy ! Component: 2400 - total flux cleaned = 0.000928502 Jy ! Component: 2450 - total flux cleaned = 0.000845093 Jy ! Component: 2500 - total flux cleaned = 0.000762382 Jy ! Component: 2550 - total flux cleaned = 0.000689439 Jy ! Component: 2600 - total flux cleaned = 0.000626047 Jy ! Component: 2650 - total flux cleaned = 0.000554213 Jy ! Component: 2700 - total flux cleaned = 0.000500737 Jy ! Component: 2750 - total flux cleaned = 0.000438774 Jy ! Component: 2800 - total flux cleaned = 0.000359808 Jy ! Component: 2850 - total flux cleaned = 0.000298822 Jy ! Component: 2900 - total flux cleaned = 0.000264123 Jy ! Component: 2950 - total flux cleaned = 0.000212444 Jy ! Component: 3000 - total flux cleaned = 0.000169531 Jy ! Component: 3050 - total flux cleaned = 0.000118286 Jy ! Component: 3100 - total flux cleaned = 4.17895e-05 Jy ! Component: 3150 - total flux cleaned = -8.97922e-06 Jy ! Component: 3200 - total flux cleaned = -8.4764e-05 Jy ! Component: 3250 - total flux cleaned = -0.000135079 Jy ! Component: 3300 - total flux cleaned = -0.0002102 Jy ! Component: 3350 - total flux cleaned = -0.000268379 Jy ! Component: 3400 - total flux cleaned = -0.000326384 Jy ! Component: 3450 - total flux cleaned = -0.000400672 Jy ! Component: 3500 - total flux cleaned = -0.000482849 Jy ! Component: 3550 - total flux cleaned = -0.00054832 Jy ! Component: 3600 - total flux cleaned = -0.000621702 Jy ! Component: 3650 - total flux cleaned = -0.000678558 Jy ! Component: 3700 - total flux cleaned = -0.000751461 Jy ! Component: 3750 - total flux cleaned = -0.000816041 Jy ! Component: 3800 - total flux cleaned = -0.000896508 Jy ! Component: 3850 - total flux cleaned = -0.000944682 Jy ! Component: 3900 - total flux cleaned = -0.000992831 Jy ! Component: 3950 - total flux cleaned = -0.00106485 Jy ! Component: 4000 - total flux cleaned = -0.00111277 Jy ! Component: 4050 - total flux cleaned = -0.0011686 Jy ! Total flux subtracted in 4096 components = -0.0012005 Jy ! Clean residual min=-0.000520 max=0.000494 Jy/beam ! Clean residual mean=-0.000001 rms=0.000148 Jy/beam ! Combined flux in latest and established models = 0.107526 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 527 components and 0.107526 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1306+8019_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.837 x 10.59 at -3.93 degrees (North through East) ! Clean map min=-0.0018374 max=0.051191 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1306+8019_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0511905 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000142743 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.836542 0.836542 1.67308 3.34617 6.69234 13.3847 26.7693 53.5387 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1306+8019_S_uvs.log closed on Sun Oct 6 10:33:33 2013