! Started logfile: /g0/scr/pima/npcsa_uvs/J1305+8216_S_uvs.log on Sun Oct 6 10:33:23 2013 obs /g0/scr/pima/npcsa_uvs/J1305+8216_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsa_uvs/J1305+8216_S_uva.fits ! AN table 1: 55 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.76404 visibilities/baseline/integration-bin. ! Found source: J1305+8216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7564 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsa_uvs/J1305+8216_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003953Jy sigma=0.949036 ! Fit after self-cal, rms=0.917646Jy sigma=0.808463 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=10.8 mas, bpa=-3.889 degrees ! Estimated noise=23.5454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.08642 Jy ! Component: 100 - total flux cleaned = 0.106209 Jy ! Total flux subtracted in 100 components = 0.106209 Jy ! Clean residual min=-0.010982 max=0.013541 Jy/beam ! Clean residual mean=-0.000004 rms=0.003351 Jy/beam ! Combined flux in latest and established models = 0.106209 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.106209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101620Jy sigma=0.105649 ! Fit after self-cal, rms=0.101065Jy sigma=0.105316 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.105 mas, bmaj=11.64 mas, bpa=-3.763 degrees ! Estimated noise=9.69552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210772 Jy ! Component: 100 - total flux cleaned = 0.0330342 Jy ! Component: 150 - total flux cleaned = 0.0403084 Jy ! Component: 200 - total flux cleaned = 0.0449193 Jy ! Total flux subtracted in 200 components = 0.0449193 Jy ! Clean residual min=-0.008419 max=0.011053 Jy/beam ! Clean residual mean=0.000008 rms=0.002419 Jy/beam ! Combined flux in latest and established models = 0.151128 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 47 components and 0.151128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100847Jy sigma=0.097267 ! Fit after self-cal, rms=0.100521Jy sigma=0.097023 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.88 HN 0.92 KP 0.88 ! LA 0.92 MK 0.91 NL 1.11 OV 0.94 ! PT 1.07 SC 0.76 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.87 HN 0.81 KP 0.89 ! LA 0.93 MK 0.96 NL 1.11 OV 0.94 ! PT 0.94 SC 0.76 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.87 KP 0.87 ! LA 0.74 MK 1.10 NL 1.25 OV 1.01 ! PT 1.10 SC 0.76 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00 HN 0.84 KP 0.83 ! LA 0.60 MK 1.08 NL 1.11 OV 0.83 ! PT 1.00 SC 0.83 ! ! ! Fit before self-cal, rms=0.100521Jy sigma=0.097023 ! Fit after self-cal, rms=0.088646Jy sigma=0.089433 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.07 mas, bmaj=11.74 mas, bpa=-4.638 degrees ! Estimated noise=8.01864 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0145794 Jy ! Component: 100 - total flux cleaned = -0.0179896 Jy ! Component: 150 - total flux cleaned = -0.0190067 Jy ! Component: 200 - total flux cleaned = -0.0190446 Jy ! Total flux subtracted in 200 components = -0.0190446 Jy ! Clean residual min=-0.004457 max=0.003938 Jy/beam ! Clean residual mean=0.000006 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.132084 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 62 components and 0.132084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081687Jy sigma=0.091973 ! Fit after self-cal, rms=0.081969Jy sigma=0.091774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081969Jy sigma=0.091774 ! Fit after self-cal, rms=0.074996Jy sigma=0.089262 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.025 mas, bmaj=11.71 mas, bpa=-4.533 degrees ! Estimated noise=6.7899 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0120253 Jy ! Component: 100 - total flux cleaned = -0.0149296 Jy ! Component: 150 - total flux cleaned = -0.0163771 Jy ! Component: 200 - total flux cleaned = -0.0167927 Jy ! Total flux subtracted in 200 components = -0.0167927 Jy ! Clean residual min=-0.003975 max=0.003539 Jy/beam ! Clean residual mean=0.000005 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.115291 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 0.115291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069364Jy sigma=0.091751 ! Fit after self-cal, rms=0.069365Jy sigma=0.091743 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107187 Jy ! Component: 100 - total flux cleaned = -0.000298393 Jy ! Component: 150 - total flux cleaned = -0.000297916 Jy ! Component: 200 - total flux cleaned = -0.00029795 Jy ! Total flux subtracted in 200 components = -0.00029795 Jy ! Clean residual min=-0.003955 max=0.003524 Jy/beam ! Clean residual mean=0.000005 rms=0.000901 Jy/beam ! Combined flux in latest and established models = 0.114993 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 77 components and 0.114993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069258Jy sigma=0.091849 ! Fit after self-cal, rms=0.069256Jy sigma=0.091847 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069256Jy sigma=0.091847 ! Fit after self-cal, rms=0.063339Jy sigma=0.089324 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.991 mas, bmaj=11.67 mas, bpa=-4.409 degrees ! Estimated noise=5.7612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00980389 Jy ! Component: 100 - total flux cleaned = -0.0124834 Jy ! Component: 150 - total flux cleaned = -0.0139287 Jy ! Component: 200 - total flux cleaned = -0.0147599 Jy ! Total flux subtracted in 200 components = -0.0147599 Jy ! Clean residual min=-0.003341 max=0.003047 Jy/beam ! Clean residual mean=0.000004 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.100233 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.100233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058784Jy sigma=0.091766 ! Fit after self-cal, rms=0.058778Jy sigma=0.091761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142763 Jy ! Component: 100 - total flux cleaned = -0.000268699 Jy ! Component: 150 - total flux cleaned = -0.00026842 Jy ! Component: 200 - total flux cleaned = -0.000253989 Jy ! Total flux subtracted in 200 components = -0.000253989 Jy ! Clean residual min=-0.003321 max=0.003055 Jy/beam ! Clean residual mean=0.000004 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0999791 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.0999791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058692Jy sigma=0.091868 ! Fit after self-cal, rms=0.058691Jy sigma=0.091867 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058691Jy sigma=0.091867 ! Fit after self-cal, rms=0.053785Jy sigma=0.089358 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.883 mas, bmaj=12.71 mas, bpa=3.583 degrees ! Estimated noise=5.57203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00889121 Jy ! Component: 100 - total flux cleaned = -0.0111847 Jy ! Component: 150 - total flux cleaned = -0.0121565 Jy ! Component: 200 - total flux cleaned = -0.0126142 Jy ! Total flux subtracted in 200 components = -0.0126142 Jy ! Clean residual min=-0.003591 max=0.002747 Jy/beam ! Clean residual mean=0.000005 rms=0.000824 Jy/beam ! Combined flux in latest and established models = 0.0873649 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 102 components and 0.0873649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049854Jy sigma=0.091981 ! Fit after self-cal, rms=0.049839Jy sigma=0.091955 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.35561e-05 Jy ! Component: 100 - total flux cleaned = -8.32326e-05 Jy ! Component: 150 - total flux cleaned = -8.30027e-05 Jy ! Component: 200 - total flux cleaned = -7.43541e-05 Jy ! Total flux subtracted in 200 components = -7.43541e-05 Jy ! Clean residual min=-0.003515 max=0.002716 Jy/beam ! Clean residual mean=0.000005 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0872906 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 104 components and 0.0872906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049825Jy sigma=0.091994 ! Fit after self-cal, rms=0.049823Jy sigma=0.091989 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=11.63 mas, bpa=-4.279 degrees ! Estimated noise=4.89467 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.963 x 11.63 at -4.279 degrees (North through East) ! Clean map min=-0.0027953 max=0.06022 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.072 mas, bmaj=10.91 mas, bpa=-4.643 degrees ! Estimated noise=11.8243 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429817 Jy ! Component: 100 - total flux cleaned = 0.054545 Jy ! Component: 150 - total flux cleaned = 0.0621374 Jy ! Component: 200 - total flux cleaned = 0.0678397 Jy ! Total flux subtracted in 200 components = 0.0678397 Jy ! Clean residual min=-0.005772 max=0.006070 Jy/beam ! Clean residual mean=-0.000000 rms=0.001601 Jy/beam ! Combined flux in latest and established models = 0.0678397 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.0678397 Jy ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=11.63 mas, bpa=-4.279 degrees ! Estimated noise=4.89467 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00780638 Jy ! Component: 100 - total flux cleaned = 0.0122234 Jy ! Component: 150 - total flux cleaned = 0.0149907 Jy ! Component: 200 - total flux cleaned = 0.0164611 Jy ! Total flux subtracted in 200 components = 0.0164611 Jy ! Clean residual min=-0.002603 max=0.002472 Jy/beam ! Clean residual mean=0.000003 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.0843008 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 57 components and 0.0843008 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.883 mas, bmaj=12.71 mas, bpa=3.583 degrees ! Estimated noise=5.57203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131418 Jy ! Component: 100 - total flux cleaned = 0.00145468 Jy ! Component: 150 - total flux cleaned = 0.00148816 Jy ! Component: 200 - total flux cleaned = 0.00146335 Jy ! Total flux subtracted in 200 components = 0.00146335 Jy ! Clean residual min=-0.003029 max=0.002468 Jy/beam ! Clean residual mean=0.000005 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.0857641 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71502e-06 Jy ! Component: 100 - total flux cleaned = 2.95658e-06 Jy ! Component: 150 - total flux cleaned = -1.35431e-05 Jy ! Component: 200 - total flux cleaned = -2.85842e-05 Jy ! Total flux subtracted in 200 components = -2.85842e-05 Jy ! Clean residual min=-0.002928 max=0.002412 Jy/beam ! Clean residual mean=0.000005 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.0857355 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 110 components and 0.0857355 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.963 mas, bmaj=11.63 mas, bpa=-4.279 degrees ! Estimated noise=4.89467 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014046 Jy ! Component: 100 - total flux cleaned = -4.4325e-05 Jy ! Component: 150 - total flux cleaned = -2.43018e-05 Jy ! Component: 200 - total flux cleaned = -4.12138e-05 Jy ! Total flux subtracted in 200 components = -4.12138e-05 Jy ! Clean residual min=-0.002517 max=0.002161 Jy/beam ! Clean residual mean=0.000003 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0856943 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.0856943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.049651Jy sigma=0.091675 ! Fit after self-cal, rms=0.049586Jy sigma=0.091580 wmodel /g0/scr/pima/npcsa_uvs/J1305+8216_S_map.mod ! Writing 136 model components to file: /g0/scr/pima/npcsa_uvs/J1305+8216_S_map.mod wobs /g0/scr/pima/npcsa_uvs/J1305+8216_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsa_uvs/J1305+8216_S_uvs.fits wwins /g0/scr/pima/npcsa_uvs/J1305+8216_S_map.win ! wwins: Wrote 2 windows to /g0/scr/pima/npcsa_uvs/J1305+8216_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000785121 Jy ! Component: 100 - total flux cleaned = -0.000985009 Jy ! Component: 150 - total flux cleaned = -0.0010194 Jy ! Component: 200 - total flux cleaned = -0.000887324 Jy ! Component: 250 - total flux cleaned = -0.000824688 Jy ! Component: 300 - total flux cleaned = -0.000765739 Jy ! Component: 350 - total flux cleaned = -0.000655107 Jy ! Component: 400 - total flux cleaned = -0.000442745 Jy ! Component: 450 - total flux cleaned = -0.000340801 Jy ! Component: 500 - total flux cleaned = -0.000168227 Jy ! Component: 550 - total flux cleaned = -2.57868e-05 Jy ! Component: 600 - total flux cleaned = 0.000180985 Jy ! Component: 650 - total flux cleaned = 0.000359069 Jy ! Component: 700 - total flux cleaned = 0.000445425 Jy ! Component: 750 - total flux cleaned = 0.000593695 Jy ! Component: 800 - total flux cleaned = 0.000737748 Jy ! Component: 850 - total flux cleaned = 0.000817767 Jy ! Component: 900 - total flux cleaned = 0.000896474 Jy ! Component: 950 - total flux cleaned = 0.000973099 Jy ! Component: 1000 - total flux cleaned = 0.001067 Jy ! Component: 1050 - total flux cleaned = 0.00117744 Jy ! Component: 1100 - total flux cleaned = 0.00126782 Jy ! Component: 1150 - total flux cleaned = 0.0013387 Jy ! Component: 1200 - total flux cleaned = 0.00142537 Jy ! Component: 1250 - total flux cleaned = 0.00147614 Jy ! Component: 1300 - total flux cleaned = 0.00155956 Jy ! Component: 1350 - total flux cleaned = 0.0016415 Jy ! Component: 1400 - total flux cleaned = 0.00164152 Jy ! Component: 1450 - total flux cleaned = 0.001721 Jy ! Component: 1500 - total flux cleaned = 0.00176766 Jy ! Component: 1550 - total flux cleaned = 0.00181388 Jy ! Component: 1600 - total flux cleaned = 0.00179877 Jy ! Component: 1650 - total flux cleaned = 0.00184413 Jy ! Component: 1700 - total flux cleaned = 0.00179941 Jy ! Component: 1750 - total flux cleaned = 0.00178484 Jy ! Component: 1800 - total flux cleaned = 0.00177016 Jy ! Component: 1850 - total flux cleaned = 0.00172719 Jy ! Component: 1900 - total flux cleaned = 0.001713 Jy ! Component: 1950 - total flux cleaned = 0.00168496 Jy ! Component: 2000 - total flux cleaned = 0.00168511 Jy ! Component: 2050 - total flux cleaned = 0.00169865 Jy ! Component: 2100 - total flux cleaned = 0.00163088 Jy ! Component: 2150 - total flux cleaned = 0.00167107 Jy ! Component: 2200 - total flux cleaned = 0.00164447 Jy ! Component: 2250 - total flux cleaned = 0.0016707 Jy ! Component: 2300 - total flux cleaned = 0.00168359 Jy ! Component: 2350 - total flux cleaned = 0.00165776 Jy ! Component: 2400 - total flux cleaned = 0.00165776 Jy ! Component: 2450 - total flux cleaned = 0.00165767 Jy ! Component: 2500 - total flux cleaned = 0.0017077 Jy ! Component: 2550 - total flux cleaned = 0.0016829 Jy ! Component: 2600 - total flux cleaned = 0.00168298 Jy ! Component: 2650 - total flux cleaned = 0.00169521 Jy ! Component: 2700 - total flux cleaned = 0.00164679 Jy ! Component: 2750 - total flux cleaned = 0.00164699 Jy ! Component: 2800 - total flux cleaned = 0.00165888 Jy ! Component: 2850 - total flux cleaned = 0.00167062 Jy ! Component: 2900 - total flux cleaned = 0.00164716 Jy ! Component: 2950 - total flux cleaned = 0.00163571 Jy ! Component: 3000 - total flux cleaned = 0.0016587 Jy ! Component: 3050 - total flux cleaned = 0.00165875 Jy ! Component: 3100 - total flux cleaned = 0.00168132 Jy ! Component: 3150 - total flux cleaned = 0.00168127 Jy ! Component: 3200 - total flux cleaned = 0.00167006 Jy ! Component: 3250 - total flux cleaned = 0.00167002 Jy ! Component: 3300 - total flux cleaned = 0.00163702 Jy ! Component: 3350 - total flux cleaned = 0.00163701 Jy ! Component: 3400 - total flux cleaned = 0.00162603 Jy ! Component: 3450 - total flux cleaned = 0.00159361 Jy ! Component: 3500 - total flux cleaned = 0.00157229 Jy ! Component: 3550 - total flux cleaned = 0.00157233 Jy ! Component: 3600 - total flux cleaned = 0.00157236 Jy ! Component: 3650 - total flux cleaned = 0.00154085 Jy ! Component: 3700 - total flux cleaned = 0.00153037 Jy ! Component: 3750 - total flux cleaned = 0.00153027 Jy ! Component: 3800 - total flux cleaned = 0.00151993 Jy ! Component: 3850 - total flux cleaned = 0.0015096 Jy ! Component: 3900 - total flux cleaned = 0.00146895 Jy ! Component: 3950 - total flux cleaned = 0.0014892 Jy ! Component: 4000 - total flux cleaned = 0.00145906 Jy ! Component: 4050 - total flux cleaned = 0.0014591 Jy ! Total flux subtracted in 4096 components = 0.00141939 Jy ! Clean residual min=-0.000702 max=0.000542 Jy/beam ! Clean residual mean=0.000001 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0871137 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 452 components and 0.0871137 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsa_uvs/J1305+8216_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.963 x 11.63 at -4.279 degrees (North through East) ! Clean map min=-0.0015576 max=0.059215 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsa_uvs/J1305+8216_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.059215 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00018553 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.939949 0.939949 1.8799 3.7598 7.5196 15.0392 30.0784 60.1568 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 quit ! Quitting program ! Log file /g0/scr/pima/npcsa_uvs/J1305+8216_S_uvs.log closed on Sun Oct 6 10:33:28 2013